We currently build cleanly with -Wformat-security, and it's
a good idea to make sure we continue to do so (since calls
that trigger the warning may be security vulnerabilities).
Note that we cannot use the stronger -Wformat-nonliteral, as
there are case where we are clever with passing around
pointers to string literals. E.g., bisect_rev_setup() takes
bad_format and good_format parameters. These ultimately come
from literals, but they still trigger the warning.
Some of these might be fixable (e.g., by passing flags from
which we locally select a format), and might even be worth
fixing (not because of security, but just because it's an
easy mistake to pass the wrong format). But there are other
cases which are likely quite hard to fix (we actually
generate formats in a local buffer in some cases). So let's
punt on that for now and start with -Wformat-security, which
is supposed to catch the most important cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A removal of this helper function was proposed 3 years ago [1]; the
function was never used since it was introduced in 2006 back then,
and there is no new callers since. Now time has proven we really do
not need the function.
[1] https://public-inbox.org/git/1421343725-3973-1-git-send-email-kuleshovmail@gmail.com/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the config documentation to note the value `2` as an acceptable
value for the protocol.version config.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier attempt barfed when given a CONTENT_LENGTH that is
set to an empty string. RFC 3875 is fairly clear that in this
case we should not read any message body, but we've been reading
through to the EOF in previous versions (which did not even pay
attention to the environment variable), so keep that behaviour for
now in this late update.
* mk/http-backend-content-length:
http-backend: allow empty CONTENT_LENGTH
This reverts commit 7e25437d35, reversing
changes made to 00624d608c.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to RFC3875, empty environment variable is equivalent to unset,
and for CONTENT_LENGTH it should mean zero body to read.
However, unset CONTENT_LENGTH is also used for chunked encoding to indicate
reading until EOF. At least, the test "large fetch-pack requests can be split
across POSTs" from t5551 starts faliing, if unset or empty CONTENT_LENGTH is
treated as zero length body. So keep the existing behavior as much as possible.
Add a test for the case.
Reported-By: Jelmer Vernooij <jelmer@jelmer.uk>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"cette" can be only be used before a word (like in "cette bouteille" for
"this bottle"), but here "this" refers to the current step and we have
to use "ceci" in French.
Signed-off-by: Raphaël Hertzog <hertzog@debian.org>
We avoid re-creating our temporary worktree if it's already
there. But we may run into a situation where the worktree
has been deleted, but an entry still exists in
$GIT_DIR/worktrees.
Older versions of git-worktree would annoyingly create a
series of duplicate entries. Recent versions now detect and
prevent this, allowing you to override with "-f". Since we
know that the worktree in question was just our temporary
workspace, it's safe for us to always pass "-f".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We provide a reopen_tempfile() function, which is in turn
used by reopen_lockfile(). The idea is that a caller may
want to rewrite the tempfile without letting go of the lock.
And that's what our one caller does: after running
add--interactive, "commit -p" will update the cache-tree
extension of the index and write out the result, all while
holding the lock.
However, because we open the file with only the O_WRONLY
flag, the existing index content is left in place, and we
overwrite it starting at position 0. If the new index after
updating the cache-tree is smaller than the original, those
final bytes are not overwritten and remain in the file. This
results in a corrupt index, since those cruft bytes are
interpreted as part of the trailing hash (or even as an
extension, if there are enough bytes).
This bug actually pre-dates reopen_tempfile(); the original
code from 9c4d6c0297 (cache-tree: Write updated cache-tree
after commit, 2014-07-13) has the same bug, and those lines
were eventually refactored into the tempfile module. Nobody
noticed until now for two reasons:
- the bug can only be triggered in interactive mode
("commit -p" or "commit -i")
- the size of the index must shrink after updating the
cache-tree, which implies a non-trivial deletion. Notice
that the included test actually has to create a 2-deep
hierarchy. A single level is not enough to actually cause
shrinkage.
The fix is to truncate the file before writing out the
second index. We can do that at the caller by using
ftruncate(). But we shouldn't have to do that. There is no
other place in Git where we want to open a file and
overwrite bytes, making reopen_tempfile() a confusing and
error-prone interface. Let's pass O_TRUNC there, which gives
callers the same state they had after initially opening the
file or lock.
It's possible that we could later add a caller that wants
something else (e.g., to open with O_APPEND). But this is
the only caller we've had in the history of the codebase.
Let's punt on doing anything more clever until another one
comes along.
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test linter code has learned that the end of here-doc mark
"EOF" can be quoted in a double-quote pair, not just in a
single-quote pair.
* es/chain-lint-more:
chainlint: match "quoted" here-doc tags
Portability fix.
* ab/portable-more:
tests: fix non-portable iconv invocation
tests: fix non-portable "${var:-"str"}" construct
tests: fix and add lint for non-portable grep --file
tests: fix version-specific portability issue in Perl JSON
tests: use shorter labels in chainlint.sed for AIX sed
tests: fix comment syntax in chainlint.sed for AIX sed
tests: fix and add lint for non-portable seq
tests: fix and add lint for non-portable head -c N
"git merge-base" in 2.19-rc1 has performance regression when the
(experimental) commit-graph feature is in use, which has been
mitigated.
* ds/commit-graph-lockfile-fix:
commit: don't use generation numbers if not needed
Recent addition of "directory rename" heuristics to the
merge-recursive backend makes the command susceptible to false
positives and false negatives. In the context of "git am -3",
which does not know about surrounding unmodified paths and thus
cannot inform the merge machinery about the full trees involved,
this risk is particularly severe. As such, the heuristic is
disabled for "git am -3" to keep the machinery "more stupid but
predictable".
* en/directory-renames-nothanks:
am: avoid directory rename detection when calling recursive merge machinery
merge-recursive: add ability to turn off directory rename detection
t3401: add another directory rename testcase for rebase and am
Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code. These are
fixed.
* pw/rebase-i-author-script-fix:
sequencer: fix quoting in write_author_script
sequencer: handle errors from read_author_ident()
The current wording of the description of GIT_TRACE=/path/to/file
("... will try to write the trace messages into it") might be
misunderstood as "overwriting"; at least I interpreted it that way on
a cursory first read.
State it more explicitly that the trace messages are appended.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function only compiles when DEBUG_BISECT is 1, which is often not
the case. As a result there are two commits [1] [2] that break it but
the breakages went unnoticed because the code did not compile by
default. Update the function and include the new header file to make this
function build again.
In order to stop this from happening again, the function is now
compiled unconditionally but exits early unless DEBUG_BISECT is
non-zero. A smart compiler generates no extra code (not even a
function call). But even if it does not, this function does not seem
to be in a hot path that the extra cost becomes a big problem.
[1] bb408ac95d (bisect.c: use commit-slab for commit weight instead of
commit->util - 2018-05-19)
[2] cbd53a2193 (object-store: move object access functions to
object-store.h - 2018-05-15)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an interactive rebase was stopped at the end of a fixup/squash
chain, the user might have edited the commit manually before continuing
(with either `git rebase --skip` or `git rebase --continue`, it does not
really matter which).
We need to be very careful to wrap up the fixup/squash chain also in
this scenario: otherwise the next fixup/squash chain would try to pick
up where the previous one was left.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `git commit --squash` command can be used not only to amend commit
messages and changes, but also to record notes for an upcoming rebase.
For example, when the author information of a given commit is incorrect,
a user might call `git commit --allow-empty -m "Fix author" --squash
<commit>`, to remind them to fix that during the rebase. When the editor
would pop up, the user would simply delete the commit message to abort
the rebase at this stage, fix the author information, and continue with
`git rebase --skip`. (This is a real-world example from the rebase of
Git for Windows onto v2.19.0-rc1.)
However, there is a bug in `git rebase` that will cause the squash
message *not* to be forgotten in this case. It will therefore be reused
in the next fixup/squash chain (if any).
This patch adds a test case to demonstrate this breakage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the early days of the bitmap code, there was a single
static bitmap_index struct that was used behind the scenes,
and any bitmap-related functions could lazily check
bitmap_git.loaded to see if they needed to read the on-disk
data.
But since 3ae5fa0768 (pack-bitmap: remove bitmap_git global
variable, 2018-06-07), the caller is responsible for the
lifetime of the bitmap_index struct, and we return it from
prepare_bitmap_git() and prepare_bitmap_walk(), both of
which load the on-disk data (or return NULL).
So outside of these functions, it's not possible to have a
bitmap_index for which the loaded flag is not true. Nor is
it possible to accidentally pass an already-loaded
bitmap_index to the loading function (which is static-local
to the file).
We can drop this unnecessary and confusing flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since it was introduced in fff42755ef (pack-bitmap: add
support for bitmap indexes, 2013-12-21), this function has
freed the result after traversing it. That is an artifact of
the early days of the bitmap code, when we had a single
static "struct bitmap_index". Back then, it was intended
that you would do:
prepare_bitmap_walk(&revs);
traverse_bitmap_commit_list(&revs);
Since the actual bitmap_index struct was totally behind the
scenes, it was convenient for traverse_bitmap_commit_list()
to clean it up, clearing the way for another traversal.
But since 3ae5fa0768 (pack-bitmap: remove bitmap_git global
variable, 2018-06-07), the caller explicitly manages the
bitmap_index struct itself, like this:
b = prepare_bitmap_walk(&revs);
traverse_bitmap_commit_list(b, &revs);
free_bitmap_index(b);
It no longer makes sense to auto-free the result after the
traversal. If you want to do another traversal, you'd just
create a new bitmap_index. And while nobody tries to call
traverse_bitmap_commit_list() twice, the fact that it throws
away the result might be surprising, and is better avoided.
Note that in the "old" way it was possible for two walks to
amortize the cost of opening the on-disk .bitmap file (since
it was stored in the global bitmap_index), but we lost that
in 3ae5fa0768. However, no code actually does this, so it's
not worth addressing now. The solution might involve a new:
reset_bitmap_walk(b, &revs);
call. Or we might even attach the bitmap data to its
matching packed_git struct, so that multiple
prepare_bitmap_walk() calls could use it. That can wait
until somebody actually has need of the optimization (and
until then, we'll do the correct, unsurprising thing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6a1e32d532 (pack-objects: reuse on-disk deltas for
thin "have" objects, 2018-08-21) taught pack-objects a new
optimization trick. Since this wasn't meant to change
user-visible behavior, but only produce smaller packs more
quickly, testing focused on t/perf/p5311.
However, since people don't run perf tests very often, we
should make sure that the feature is exercised in the
regular test suite. This patch does so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 30cdc33fba (pack-bitmap: save "have" bitmap from
walk, 2018-08-21) introduced a new function for looking at
the "have" side of a bitmap walk. Because it only makes
sense to do so after we've finished the walk, we added an
extra safety assertion, making sure that bitmap_git->result
is non-NULL.
However, this safety is misguided. It was trying to catch
the case where we had called prepare_bitmap_walk() to give
us a "struct bitmap_index", but had not yet called
traverse_bitmap_commit_list() to walk it. But all of the
interesting computation (including setting up the result and
"have" bitmaps) happens in the first function! The latter
function only delivers the result to a callback function.
So the case we were worried about is impossible; if you get
a non-NULL result from prepare_bitmap_walk(), then its
"have" field will be fully formed.
But much worse, traverse_bitmap_commit_list() actually frees
the result field as it finishes. Which means that this
assertion is worse than useless: it's almost guaranteed to
trigger!
Our test suite didn't catch this because the function isn't
actually exercised at all. The only caller comes from
6a1e32d532 (pack-objects: reuse on-disk deltas for thin
"have" objects, 2018-08-21), and that's triggered only when
you fetch or push history that contains an object with a
base that is found deep in history. Our test suite fetches
and pushes either don't use bitmaps, or use too-small
example repositories. But any reasonably-sized real-world
push or fetch (with bitmaps) would trigger this.
This patch drops the harmful assertion and tweaks the
docstring for the function to make the precondition clear.
The tests need to be improved to exercise this new
pack-objects feature, but we'll do that in a separate
commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "fetch" to treat "+" in refspecs (aka --force) to mean we
should clobber a local tag of the same name.
This changes the long-standing behavior of "fetch" added in
853a3697dc ("[PATCH] Multi-head fetch.", 2005-08-20). Before this
change, all tag fetches effectively had --force enabled. See the
git-fetch-script code in fast_forward_local() with the comment:
> Tags need not be pointing at commits so there is no way to
> guarantee "fast-forward" anyway.
That commit and the rest of the history of "fetch" shows that the
"+" (--force) part of refpecs was only conceived for branch updates,
while tags have accepted any changes from upstream unconditionally and
clobbered the local tag object. Changing this behavior has been
discussed as early as 2011[1].
The current behavior doesn't make sense to me, it easily results in
local tags accidentally being clobbered. We could namespace our tags
per-remote and not locally populate refs/tags/*, but as with my
97716d217c ("fetch: add a --prune-tags option and fetch.pruneTags
config", 2018-02-09) it's easier to work around the current
implementation than to fix the root cause.
So this change implements suggestion #1 from Jeff's 2011 E-Mail[1],
"fetch" now only clobbers the tag if either "+" is provided as part of
the refspec, or if "--force" is provided on the command-line.
This also makes it nicely symmetrical with how "tag" itself works when
creating tags. I.e. we refuse to clobber any existing tags unless
"--force" is supplied. Now we can refuse all such clobbering, whether
it would happen by clobbering a local tag with "tag", or by fetching
it from the remote with "fetch".
Ref updates outside refs/{tags,heads/* are still still not symmetrical
with how "git push" works, as discussed in the recently changed
pull-fetch-param.txt documentation. This change brings the two
divergent behaviors more into line with one another. I don't think
there's any reason "fetch" couldn't fully converge with the behavior
used by "push", but that's a topic for another change.
One of the tests added in 31b808a032 ("clone --single: limit the fetch
refspec to fetched branch", 2012-09-20) is being changed to use
--force where a clone would clobber a tag. This changes nothing about
the existing behavior of the test.
1. https://public-inbox.org/git/20111123221658.GA22313@sigill.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refer to the new git-push(1) documentation about when ref updates are
and aren't allowed with and without --force, noting how "git-fetch"
differs from the behavior of "git-push".
Perhaps it would be better to split this all out into a new
gitrefspecs(7) man page, or present this information using tables.
In lieu of that, this is accurate, and fixes a big omission in the
existing refspec docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's complex rules governing whether a push is allowed to take
place depending on whether we're pushing to refs/heads/*, refs/tags/*
or refs/not-that/*. See is_branch() in refs.c, and the various
assertions in refs/files-backend.c. (e.g. "trying to write non-commit
object %s to branch '%s'").
This documentation has never been quite correct, but went downhill
after dbfeddb12e ("push: require force for refs under refs/tags/",
2012-11-29) when we started claiming that <dst> couldn't be a tag
object, which is incorrect. After some of the logic in that patch was
changed in 256b9d70a4 ("push: fix "refs/tags/ hierarchy cannot be
updated without --force"", 2013-01-16) the docs weren't updated, and
we've had some version of documentation that confused whether <src>
was a tag or not with whether <dst> would accept either an annotated
tag object or the commit it points to.
This makes the intro somewhat more verbose & complex, perhaps we
should have a shorter description here and split the full complexity
into a dedicated section. Very few users will find themselves needing
to e.g. push blobs or trees to refs/custom-namespace/* (or blobs or
trees at all), and that could be covered separately as an advanced
topic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change will be followed-up with a subsequent change where I'll
change both sides of this mention of "tag <tag>" to be something
that's best read without interruption.
To make that change smaller, let's move this mention of "tag <tag>" to
the end of the "<refspec>..." section, it's now somewhere in the
middle.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Saying that "git push <remote> <src>:<dst>" won't push a merger of
<src> and <dst> to <dst> is clear from the rest of the context here,
so mentioning it is redundant, furthermore the mention of "EXAMPLES
below" isn't specific or useful.
This phrase was originally added in 149f6ddfb3 ("Docs: Expand
explanation of the use of + in git push refspecs.", 2009-02-19), as
can be seen in that change the point of the example being cited was to
show that force pushing can leave unreferenced commits on the
remote. It's enough that we explain that in its own section, it
doesn't need to be mentioned here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test suite only incidentally (and unintentionally) tested for the
current behavior of eager tag clobbering on "fetch". This is a
followup to 380efb65df ("push tests: assert re-pushing annotated
tags", 2018-07-31) which tests for it explicitly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The quoted -m'msg' option would mean the same as -mmsg when passed
through the test_force_push_tag helper. Let's instead use a string
with spaces in it, to have a working example in case we need to pass
other whitespace-delimited arguments to git-tag.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix up a logic error in 380efb65df ("push tests: assert re-pushing
annotated tags", 2018-07-31), where the $tag_type_description variable
was assigned to but never used, unlike in the subsequently added
companion test for fetches in 2d216a7ef6 ("fetch tests: add a test for
clobbering tag behavior", 2018-04-29).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -h output has been referring to the --force command as forcing the
overwriting of local branches, but since "fetch" more generally
fetches all sorts of references in all refs/ namespaces, let's talk
about forcing the update of a a "reference" instead.
This wording was initially introduced in 8320199873 ("Rewrite
builtin-fetch option parsing to use parse_options().", 2007-12-04).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OLD_ICONV has long been needed by FreeBSD so config.mak.uname defines
it unconditionally. However, recent versions do not need it, and its
presence results in compilation warnings. Resolve this issue by defining
OLD_ICONV only for older FreeBSD versions.
Specifically, revision r281550[1], which is part of FreeBSD 11, removed
the need for OLD_ICONV, and r282275[2] back-ported that change to 10.2.
Versions prior to 10.2 do need it.
[1] b0813ee288
[2] b709ec868a
[es: commit message; tweak version check to distinguish 10.x versions]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc-diff creates a temporary working tree (git-worktree) and generates a
bunch of temporary files which it does not remove since they act as a
cache to speed up subsequent runs. Although doc-diff's working tree and
generated files are not strictly build products of the Makefile (which,
itself, never runs doc-diff), as a convenience, update "make clean" to
clean up doc-diff's working tree and generated files along with other
development detritus normally removed by "make clean".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
