This has been there since textconv existed, but was never
documented. There is some overlap with what's in
gitattributes(5), but it's important to warn in both places
that textconv diffs probably can't be applied.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix documentation on "git diff --check" by adopting the description from
"git apply --whitespace".
Signed-off-by: Christof Krüger <git@christof-krueger.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often one is interested in the full --stat output only for commits which
change a few files, but not others, because larger restructuring gives a
--stat which fills a few screens.
Introduce a new option --stat-count=<count> which limits the --stat output
to the first <count> lines, followed by a "..." line. It can
also be given as the third parameter in
--stat=<width>,<name-width>,<count>.
Also, the unstuck form is supported analogous to the other two stat
parameters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/dirstat-lines:
Mark dirstat error messages for translation
Improve error handling when parsing dirstat parameters
New --dirstat=lines mode, doing dirstat analysis based on diffstat
Allow specifying --dirstat cut-off percentage as a floating point number
Add config variable for specifying default --dirstat behavior
Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
Make --dirstat=0 output directories that contribute < 0.1% of changes
Add several testcases for --dirstat and friends
This patch adds an alternative implementation of show_dirstat(), called
show_dirstat_by_line(), which uses the more expensive diffstat analysis
(as opposed to show_dirstat()'s own (relatively inexpensive) analysis)
to derive the numbers from which the --dirstat output is computed.
The alternative implementation is controlled by the new "lines" parameter
to the --dirstat option (or the diff.dirstat config variable).
For binary files, the diffstat analysis counts bytes instead of lines,
so to prevent binary files from dominating the dirstat results, the
byte counts for binary files are divided by 64 before being compared to
their textual/line-based counterparts. This is a stupid and ugly - but
very cheap - heuristic.
In linux-2.6.git, running the three different --dirstat modes:
time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null
yields the following average runtimes on my machine:
- "changes" (default): ~6.0 s
- "lines": ~9.6 s
- "files": ~0.1 s
So, as expected, there's a considerable performance hit (~60%) by going
through the full diffstat analysis as compared to the default "changes"
analysis (obviously, "files" is much faster than both). As such, the
"lines" mode is probably only useful if you really need the --dirstat
numbers to be consistent with the numbers returned from the other
--*stat options.
The patch also includes documentation and tests for the new dirstat mode.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new diff.dirstat config variable takes the same arguments as
'--dirstat=<args>', and specifies the default arguments for --dirstat.
The config is obviously overridden by --dirstat arguments passed on the
command line.
When not specified, the --dirstat defaults are 'changes,noncumulative,3'.
The patch also adds several tests verifying the interaction between the
diff.dirstat config variable, and the --dirstat command line option.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having multiple interconnected dirstat-related options, teach
the --dirstat option itself to accept all behavior modifiers as parameters.
- Preserve the current --dirstat=<limit> (where <limit> is an integer
specifying a cut-off percentage)
- Add --dirstat=cumulative, replacing --cumulative
- Add --dirstat=files, replacing --dirstat-by-file
- Also add --dirstat=changes and --dirstat=noncumulative for specifying the
current default behavior. These allow the user to reset other --dirstat
parameters (e.g. 'cumulative' and 'files') occuring earlier on the
command line.
The deprecated options (--cumulative and --dirstat-by-file) are still
functional, although they have been removed from the documentation.
Allow multiple parameters to be separated by commas, e.g.:
--dirstat=files,10,cumulative
Update the documentation accordingly, and add testcases verifying the
behavior of the new syntax.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading the diff-family and config man pages one may think that the
color.diff and color.ui settings apply to all diff commands. Make it
clearer that they do not apply to the plumbing variants
diff-{files,index,tree}.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the --dirstat analysis ignores when lines within a file are
rearranged, because the "damage" calculated by show_dirstat() is 0.
However, if the object name has changed, we already know that there is
some damage, and it is unintuitive to claim there is _no_ damage.
Teach show_dirstat() to assign a minimum amount of damage (== 1) to
entries for which the analysis otherwise yields zero damage, to still
represent that these files are changed, instead of saying that there
is no change.
Also, skip --dirstat analysis when the object names are the same (e.g. for
a pure file rename).
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a testcase documenting the current behavior.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reviewing a patch while concentrating primarily on the text after
then change, wading through pages of deleted text involves a cognitive
burden.
Introduce the -D option that omits the preimage text from the patch output
for deleted files. When used with -B (represent total rewrite as a single
wholesale deletion followed by a single wholesale addition), the preimage
text is also omitted.
To prevent such a patch from being applied by mistake, the output is
designed not to be usable by "git apply" (or GNU "patch"); it is strictly
for human consumption.
It of course is possible to "apply" such a patch by hand, as a human can
read the intention out of such a patch. It however is impossible to apply
such a patch even manually in reverse, as the whole point of this option
is to omit the information necessary to do so from the output.
Initial request by Mart Sõmermaa, documentation and tests helped by
Michael J Gruber.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is more consistent with existing --find-copies-harder; luckily "detect"
variant has not appeared in any officially released version of git.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes little sense to have --diff-filter in the middle of them, and
even spares an ifndef::git-format-patch.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the regex-like bracket expression, use grouping to make
it more consistent with other similar places. The brackets now have the
same meaning as in other documentation (i.e., the argument is optional).
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Mentored-and-Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new long-form options --detect-renames[=<n>], --detect-copies[=<n>],
and --break-rewrites[=[<n>][/<m>]] as synonyms for the -M, -C, and -B
options (respectively).
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "-G<regexp>" that is similar to "-S<regexp> --pickaxe-regexp" to the
"git diff" family of commands. This limits the diff queue to filepairs
whose patch text actually has an added or a deleted line that matches the
given regexp. Unlike "-S<regexp>", changing other parts of the line that
has a substring that matches the given regexp IS counted as a change, as
such a change would appear as one deletion followed by one addition in a
patch text.
Unlike -S (pickaxe) that is intended to be used to quickly detect a commit
that changes the number of occurrences of hits between the preimage and
the postimage to serve as a part of larger toolchain, this is meant to be
used as the top-level Porcelain feature.
The implementation unfortunately has to run "diff" twice if you are
running "log" family of commands to produce patches in the final output
(e.g. "git log -p" or "git format-patch"). I think we _could_ cache the
result in-core if we wanted to, but that would require larger surgery to
the diffcore machinery (i.e. adding an extra pointer in the filepair
structure to keep a pointer to a strbuf around, stuff the textual diff to
the strbuf inside diffgrep_consume(), and make use of it in later stages
when it is available) and it may not be worth it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
Add tests for the diff.ignoreSubmodules config option
Add the 'diff.ignoreSubmodules' config setting
Submodules: Use "ignore" settings from .gitmodules too for diff and status
Submodules: Add the new "ignore" config option for diff and status
Conflicts:
diff.c
These options take an optional argument, but this optional argument was
not documented.
Original patch by Matthieu Moy, but documentation for -B mostly copied
from the explanations of Junio C Hamano.
While we're there, fix a typo in a comment in diffcore.h.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/maint-diff-ignore-submodules:
t4027,4041: Use test -s to test for an empty file
Add optional parameters to the diff option "--ignore-submodules"
git diff: rename test that had a conflicting name
In some use cases it is not desirable that the diff family considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree. An example for that are scripts
which just want to check for submodule commits while ignoring any changes
to the work tree. Also users having large submodules known not to change
might want to use this option, as the - sometimes substantial - time it
takes to scan the submodule work tree(s) is saved.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here we simply make --patch a synonym for -p, whose mnemonic was "patch"
all along.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As an option to the "diff" family, it is fairly obvious what
"detect renames" means. However, for revision traversal, the
"-M" option is just included in the long list of options,
with no indication that it is about showing renames in diffs
versus following renames. Let's make it more explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-z also alters the behaviour of --name-only and --name-status.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the --color-words engine a more general interface that
supports two new modes:
* --word-diff=plain, inspired by the 'wdiff' utility (most similar to
'wdiff -n <old> <new>'): uses delimiters [-removed-] and {+added+}
* --word-diff=porcelain, which generates an ad-hoc machine readable
format:
- each diff unit is prefixed by [-+ ] and terminated by newline as
in unified diff
- newlines in the input are output as a line consisting only of a
tilde '~'
Both of these formats still support color if it is enabled, using it
to highlight the differences. --color-words becomes a synonym for
--word-diff=color, which is the color-only format. Also adds some
compatibility/convenience options.
Thanks to Junio C Hamano and Miles Bader for good ideas.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-branch, git-show-branch, git-grep, and all the diff-based
programs accept an optional argument <when> for --color. The argument
is a colorbool: "always", "never", or "auto". If no argument is given,
"always" is used; --no-color is an alias for --color=never. This makes
the command-line interface consistent with other GNU tools, such as `ls'
and `grep', and with the git-config color options. Note that, without
an argument, --color and --no-color work exactly as before.
To implement this, two internal changes were made:
1. Allow the first argument of git_config_colorbool() to be NULL,
in which case it returns -1 if the argument isn't "always", "never",
or "auto".
2. Add OPT_COLOR_FLAG(), OPT__COLOR(), and parse_opt_color_flag_cb()
to the option parsing library. The callback uses
git_config_colorbool(), so color.h is now a dependency
of parse-options.c.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 64485b4a, the documentation for 'git log -z' was
simplified too much. The -z option actually changes the behavior
of 'git log' in two ways: commits will be ended with a NUL
instead of a LF (correctly documented) and the --raw and
--numstat will have NUL as field terminators (omitted in
the documentation for 'git log').
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for -z is too vague and general for the
apply, diff*, and log commands.
Change the description of -z for 'git log' to note that
commits will be separated by NULs.
Change the description of -z for 'git diff*' and 'git apply'
to note that it applies to the --numstat option, and for
'git diff*' also for --raw option.
Also correct the description of the "munging" of pathanmes that
takes place in the absence of -z for the 'git diff*' and
'git apply' commands, namely that apart from the characters mentioned,
double quotes will also be escaped and that the pathname will be
enclosed in double quotes if any characters are escaped.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bg/format-patch-doc-update:
format-patch: Add "--no-stat" as a synonym for "-p"
format-patch documentation: Fix formatting
format-patch documentation: Remove diff options that are not useful
format-patch: Always generate a patch
"-p" means "generate patch" in 'git log' and 'git diff', so it's
quite surprising that it means "suppress diffstat" in
'git format-patch'.
Keep the "-p" option for backward compatibility, but add
"--no-stat" as a more intuitive synonym. For backward compatibility
with scripts, we must allow combinations of --stat and --no-stat.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format git commands and options consistently using back quotes
(i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To simplify reading the documentation for format-patch, remove the
description of common diff options that are not useful for the
purpose of the command (i.e. "Prepare patches for e-mail submission").
Specifically, this removes the description of the following options:
--raw
-z
--color
--no-color
--color-words
--diff-filter
-S
--pickaxe-all
--pickaxe-regex
-R
--relative
--exit-code
--quiet
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
