Add progress to write_midx_file. Progress is displayed
when the MIDX_PROGRESS flag is set.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the MIDX_PROGRESS flag and update the
write|verify|expire|repack functions in midx.h
to accept a flags parameter. The MIDX_PROGRESS
flag indicates whether the caller of the function
would like progress information to be displayed.
This patch only changes the method prototypes
and does not change the functionality. The
functionality change will be handled by a later patch.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Azure Pipelines builds are failing for macOS due to a change in the
location of the perforce cask. The command outputs the following error:
+ brew install caskroom/cask/perforce
Error: caskroom/cask was moved. Tap homebrew/cask-cask instead.
So let's try to call `brew cask install perforce` first (which is what
that error message suggests, in a most round-about way).
Prior to 672f51cb we used to install the 'perforce' package with 'brew
install perforce' (note: no 'cask' in there). The justification for
672f51cb was that the command 'brew install perforce' simply stopped
working, after Homebrew folks decided that it's better to move the
'perforce' package to a "cask". Their justification for this move was
that 'brew install perforce' "can fail due to a checksum mismatch ...",
and casks can be installed without checksum verification. And indeed,
both 'brew cask install perforce' and 'brew install
caskroom/cask/perforce' printed something along the lines of:
==> No checksum defined for Cask perforce, skipping verification
It is unclear why 672f51cb used 'brew install caskroom/cask/perforce'
instead of 'brew cask install perforce'. It appears (by running both
commands on old Travis CI macOS images) that both commands worked all
the same already back then.
In any case, as the error message at the top of this commit message
shows, 'brew install caskroom/cask/perforce' has stopped working
recently, but 'brew cask install perforce' still does, so let's use
that.
CI servers are typically fresh virtual machines, but not always. To
accommodate for that, let's try harder if `brew cask install perforce`
fails, by specifically pulling the latest `master` of the
`homebrew-cask` repository.
This will still fail, of course, when `homebrew-cask` falls behind
Perforce's release schedule. But once it is updated, we can now simply
re-run the failed jobs and they will pick up that update.
As for updating `homebrew-cask`: the beginnings of automating this in
https://dev.azure.com/gitgitgadget/git/_build?definitionId=11&_a=summary
will be finished once the next Perforce upgrade comes around.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transform the setup "tests" to setup functions, and have the actual
tests call the setup functions. Advantages:
* Should make life easier for people working with webby CI/PR builds
who have to abuse mice (and their own index finger as well) in
order to switch from viewing one testcase to another. Sounds
awful; hopefully this will improve things for them.
* Improves re-runnability: any failed test in any of these three
files can now be re-run in isolation, e.g.
./t6042* --ver --imm -x --run=21
whereas before it would require two tests to be specified to the
--run argument, the other needing to be picked out as the relevant
setup test from one or two tests before.
* Importantly, this still keeps the "setup" and "test" sections
somewhat separate to make it easier for readers to discern what is
just ancillary setup and what the intent of the test is.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow renaming all entries in e.g. a directory named z/ into a
directory named y/ to be detected as a z/ -> y/ rename, so that if the
other side of history adds any files to the directory z/ in the mean
time, we can provide the hint that they should be moved to y/.
There is no reason to not allow 'y/' to be the root directory, but the
code did not handle that case correctly. Add a testcase and the
necessary special checks to support this case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dscho noted a few things making this function hard to follow.
Restructure it a bit and add comments to make it easier to follow. The
restructurings include:
* There was a special case if-check at the end of the function
checking whether someone just renamed a file within its original
directory, meaning that there could be no directory rename involved.
That check was slightly convoluted; it could be done in a more
straightforward fashion earlier in the function, and can be done
more cheaply too (no call to strncmp).
* The conditions for advancing end_of_old and end_of_new before
calling strchr were both confusing and unnecessary. If either
points at a '/', then they need to be advanced in order to find the
next '/'. If either doesn't point at a '/', then advancing them one
char before calling strchr() doesn't hurt. So, just rip out the
if conditions and advance both before calling strchr().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing wording gives an impression that it only gives the
contents of the $GIT_DIR/rebase-apply/patch file, i.e. the patch
proper, but the option actually emits the entire e-mail message
being processed (iow, one of the output files from "git mailsplit").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to t/README, test_must_fail() should only be used to test for
failure in Git commands. Replace the invocations of
`test_must_fail grep` with `! grep`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted by Gábor in [1], the new tests in edefc31873 ("format-patch:
create leading components of output directory", 2019-10-11) cannot be
run independently. Fix this.
[1] https://public-inbox.org/git/20191011144650.GM29845@szeder.dev/
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, the CI/PR builds that build and test using Visual Studio
were implemented imitating `linux-clang`, i.e. still using the
`Makefile`-based build infrastructure.
Later (but still before the patches made their way into git.git's
`master`), however, this was changed to generate Visual Studio project
files and build the binaries using `MSBuild`, as this reflects more
accurately how Visual Studio users would want to build Git (internally,
Visual Studio uses `MSBuild`, or at least something very similar).
During that transition, we needed to implement a new way to run the test
suite in parallel, as Visual Studio users typically will only have a Git
Bash available (which does not ship with `make` nor with support for
`prove`): we simply implemented a new test helper to run the test suite.
This helper even knows how to run the tests in parallel, but due to a
mistake on this developer's part, it was never turned on in the CI/PR
builds. This results in 2x-3x longer run times of the test phase.
Let's use the `--jobs=10` option to fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make full use of the work that went into the Visual Studio build &
test jobs in our CI/PR builds, let's turn on strict compiler flags. This
will give us the benefit of Visual C's compiler warnings (which, at
times, seem to catch things that GCC does not catch, and vice versa).
While at it, also turn on optimization; It does not make sense to
produce binaries with debug information, and we can use any ounce of
speed that we get (because the test suite is particularly slow on
Windows, thanks to the need to run inside a Unix shell, which
requires us to use the POSIX emulation layer provided by MSYS2).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While reviewing some dts diffs recently I noticed that the hunk header
logic was failing to find the containing node. This is because the regex
doesn't consider properties that may span multiple lines, i.e.
property = <something>,
<something_else>;
and it got hung up on comments inside nodes that look like the root node
because they start with '/*'. Add tests for these cases and update the
regex to find them. Maybe detecting the root node is too complicated but
forcing it to be a backslash with any amount of whitespace up to an open
bracket seemed OK. I tried to detect that a comment is in-between the
two parts but I wasn't happy so I just dropped it.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are looking at bitfield constants, and elsewhere in the Git source
code, such cases are handled via bit shift operators rather than octal
numbers, which also makes it easier to spot holes in the range
(if, say, 1<<5 was missing, it is easier to spot it between 1<<4
and 1<<6 than it is to spot a missing 040 between a 020 and a 0100).
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since --preserve-merges has been deprecated in favour of
--rebase-merges, mark this option as hidden so it no longer shows up in
the usage and completions.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the command description, including paragraph spacing.
Git URLs can accept bundle files for fetch, pull and clone, include
in that section. Include git clone in the bundle usage description.
Correct the quoting of <git-rev-list-args>.
Detail the <git-rev-list-args> options for cloning a complete repo.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a tag, we may end up with a NULL "tagged" field when
there's a type mismatch (e.g., the tag claims to point to object X as a
commit, but we previously saw X as a blob in the same process), but we
do not otherwise indicate a parse failure to the caller.
This is similar to the case discussed in the previous commit, where a
commit could end up with a NULL tree field: while slightly convenient
for callers who want to overlook a corrupt object, it means that normal
callers have to explicitly deal with this case (rather than just relying
on the return code from parsing). And most don't, leading to segfault
fixes like the one in c77722b3ea (use get_tagged_oid(), 2019-09-05).
Let's address this more centrally, by returning an error code from the
parse itself, which most callers would already notice (adventurous
callers are free to ignore the error and continue looking at the
struct).
This also covers the case where the tag contains a nonsensical "type"
field (there we produced a user-visible error but still returned success
to the caller; now we'll produce a slightly better message and return an
error).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If parsing a commit yields a valid tree oid, but we've seen that same
oid as a non-tree in the same process, the resulting commit struct will
end up with a NULL tree pointer, but not otherwise report a parsing
failure.
That's perhaps convenient for callers which want to operate on even
partially corrupt commits (e.g., by still looking at the parents). But
it leaves a potential trap for most callers, who now have to manually
check for a NULL tree. Most do not, and it's likely that there are
possible segfaults lurking. I say "possible" because there are many
candidates, and I don't think it's worth following through on
reproducing them when we can just fix them all in one spot. And
certainly we _have_ seen real-world cases, such as the one fixed by
806278dead (commit-graph.c: handle corrupt/missing trees, 2019-09-05).
Note that we can't quite drop the check in the caller added by that
commit yet, as there's some subtlety with repeated parsings (which will
be addressed in a future commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While parsing the parents of a commit, if we are able to parse an actual
oid but lookup_commit() fails on it (because we previously saw it in
this process as a different object type), we silently omit the parent
and do not report any error to the caller.
The caller has no way of knowing this happened, because even an empty
parent list is a valid parse result. As a result, it's possible to fool
our "rev-list" connectivity check into accepting a corrupted set of
objects.
There's a test for this case already in t6102, but unfortunately it has
a slight error. It creates a broken commit with a parent line pointing
to a blob, and then checks that rev-list notices the problem in two
cases:
1. the "lone" case: we traverse the broken commit by itself (here we
try to actually load the blob from disk and find out that it's not
a commit)
2. the "seen" case: we parse the blob earlier in the process, and then
when calling lookup_commit() we realize immediately that it's not a
commit
The "seen" variant for this test mistakenly parsed another commit
instead of the blob, meaning that we were actually just testing the
"lone" case again. Changing that reveals the breakage (and shows that
this fixes it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 't0500-progress-display.sh' all tests running 'test-tool progress
--total=<N>' fail on big-endian systems, e.g. like this:
+ test-tool progress --total=3 Working hard
[...]
+ test_i18ncmp expect out
--- expect 2019-10-18 23:07:54.765523916 +0000
+++ out 2019-10-18 23:07:54.773523916 +0000
@@ -1,4 +1,2 @@
-Working hard: 33% (1/3)<CR>
-Working hard: 66% (2/3)<CR>
-Working hard: 100% (3/3)<CR>
-Working hard: 100% (3/3), done.
+Working hard: 0% (1/12884901888)<CR>
+Working hard: 0% (3/12884901888), done.
The reason for that bogus value is that '--total's parameter is parsed
via parse-options's OPT_INTEGER into a uint64_t variable [1], so the
two bits of 3 end up in the "wrong" bytes on big-endian systems
(12884901888 = 0x300000000).
Change the type of that variable from uint64_t to int, to match what
parse-options expects; in the tests of the progress output we won't
use values that don't fit into an int anyway.
[1] start_progress() expects the total number as an uint64_t, that's
why I chose the same type when declaring the variable holding the
value given on the command line.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
[jpag: Debian unstable/ppc64 (big-endian)]
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
[tz: Fedora s390x (big-endian)]
Tested-By: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original comment does not describe type of ~/.zsh/_git explicitly
and zsh does not warn or fail if a user create it as a dictionary.
So unexperienced users could be misled by the original comment.
There is a small update to clarify it.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Maxim Belsky <public.belsky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" lost local changes to submodules, which has been
corrected.
* jj/stash-reset-only-toplevel:
stash: avoid recursive hard reset on submodules
"git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>"
not "mkdir -p <outdir>", which is being corrected.
* bw/format-patch-o-create-leading-dirs:
format-patch: create leading components of output directory
94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) introduced
a small memory leak visible with valgrind in t7813.
Complete the creation of a PCRE2 specific variable that was missing from
the original change and free the generated table just like it is done
for PCRE1.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
94da9193a6 (grep: add support for PCRE v2, 2017-06-01) didn't include
a way to override the system allocator, and so it is incompatible with
custom allocators (e.g. nedmalloc). This problem became obvious when we
tried to plug a memory leak by `free()`ing a data structure allocated by
PCRE2, triggering a segfault in Windows (where we use nedmalloc by
default).
PCRE2 requires the use of a general context to override the allocator
and therefore, there is a lot more code needed than in PCRE1, including
a couple of wrapper functions.
Extend the grep API with a "destructor" that could be called to cleanup
any objects that were created and used globally.
Update `builtin/grep.c` to use that new API, but any other future users
should make sure to have matching `grep_init()`/`grep_destroy()` calls
if they are using the pattern matching functionality.
Move some of the logic that was before done per thread (in the workers)
into an earlier phase to avoid degrading performance, but as the use of
PCRE2 with custom allocators is better understood it is expected more of
its functions will be instructed to use the custom allocator as well as
was done in the original code[1] this work was based on.
[1] https://public-inbox.org/git/3397e6797f872aedd18c6d795f4976e1c579514b.1565005867.git.gitgitgadget@gmail.com/
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) didn't include a way
to override the system alocator, and so it is incompatible with
USE_NED_ALLOCATOR as reported by Dscho[1] (in similar code from PCRE2)
Note that nedmalloc, as well as other custom allocators like jemalloc
and mi-malloc, can be configured at runtime (via `LD_PRELOAD`),
therefore we cannot know at compile time whether a custom allocator is
used or not.
Make the minimum change possible to ensure this combination is supported
by extending `grep_init()` to set the PCRE1 specific functions to Git's
idea of `malloc()` and `free()` and therefore making sure all
allocations are done inside PCRE1 with the same allocator than the rest
of Git.
This change has negligible performance impact: PCRE needs to allocate
memory once per program run for the character table and for each pattern
compilation. These are both rare events compared to matching patterns
against lines. Actual measurements[2] show that the impact is lost in
the noise.
[1] https://public-inbox.org/git/pull.306.git.gitgitgadget@gmail.com
[2] https://public-inbox.org/git/7f42007f-911b-c570-17f6-1c6af0429586@web.de
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin/notes.c::copy() function is prepared to handle either
one or two arguments given from the command line; when one argument
is given, to-obj defaults to HEAD.
bbb1b8a3 ("notes: check number of parameters to "git notes copy"",
2010-06-28) tried to make sure "git notes copy" (with *no* other
argument) does not dereference NULL by checking the number of
parameters, but it incorrectly insisted that we need two arguments,
instead of either one or two. This disabled the defaulting to-obj
to HEAD.
Correct it.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit bbb1b8a35a ("notes: check number of parameters to "git notes
copy"", 2010-06-28) added a test for too many or too few of
parameters provided to `git notes copy'.
However, the test only ensures that the command will fail but it
doesn't really check if it fails because of number of parameters.
If we accidentally lifted the check inside our code base, the test
may still have failed because the provided parameter is not a valid
ref.
Correct it.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing more than one reference with the --atomic option, the
server is supposed to perform a single atomic transaction to update the
references, leaving them either all to succeed or all to fail. This
works fine when pushing locally or over SSH, but when pushing over HTTP,
we fail to pass the atomic capability to the remote side. In fact, we
have not reported this capability to any remote helpers during the life
of the feature.
Now normally, things happen to work nevertheless, since we actually
check for most types of failures, such as non-fast-forward updates, on
the client side, and just abort the entire attempt. However, if the
server side reports a problem, such as the inability to lock a ref, the
transaction isn't atomic, because we haven't passed the appropriate
capability over and the remote side has no way of knowing that we wanted
atomic behavior.
Fix this by passing the option from the transport code through to remote
helpers, and from the HTTP remote helper down to send-pack. With this
change, we can detect if the server side rejects the push and report
back appropriately. Note the difference in the messages: the remote
side reports "atomic transaction failed", while our own checking rejects
pushes with the message "atomic push failed".
Document the atomic option in the remote helper documentation, so other
implementers can implement it if they like.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 04005834ed ("log: fix coloring of certain octopus merge shapes",
2018-09-01) there is a fix for the coloring of dashes following an
octopus merge. It makes a distinction between the case where all parents
introduce a new column, versus the case where the first parent collapses
into an existing column:
| *-. | *-.
| |\ \ | |\ \
| | | | |/ / /
The latter case means that the columns for the merge parents begin one
place to the left in the `new_columns` array compared to the former
case.
However, the implementation only works if the commit's parents are kept
in order as they map onto the visual columns, as we get the colors by
iterating over `new_columns` as we print the dashes. In general, the
commit's parents can arbitrarily merge with existing columns, and change
their ordering in the process.
For example, in the following diagram, the number of each column
indicates which commit parent appears in each column.
| | *---.
| | |\ \ \
| | |/ / /
| |/| | /
| |_|_|/
|/| | |
3 1 0 2
If the columns are colored (red, green, yellow, blue), then the dashes
will currently be colored yellow and blue, whereas they should be blue
and red.
To fix this, we need to look up each column in the `mapping` array,
which before the `GRAPH_COLLAPSING` state indicates which logical column
is displayed in each visual column. This implementation is simpler as it
doesn't have any edge cases, and it also handles how left-skewed first
parents are now displayed:
| *-.
|/|\ \
| | | |
0 1 2 3
The color of the first dashes is always the color found in `mapping` two
columns to the right of the commit symbol. Because commits are displayed
after all edges have been collapsed together and the visual columns
match the logical ones, we can find the visual offset of the commit
symbol using `commit_index`.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge commit is printed and its final parent is the same commit
that occupies the column to the right of the merge, this results in a
kink in the displayed edges:
* |
|\ \
| |/
| *
Graphs containing these shapes can be hard to read, as the expansion to
the right followed immediately by collapsing back to the left creates a
lot of zig-zagging edges, especially when many columns are present.
We can improve this by eliminating the zig-zag and having the merge's
final parent edge fuse immediately with its neighbor:
* |
|\|
| *
This reduces the horizontal width for the current commit by 2, and
requires one less row, making the graph display more compact. Taken in
combination with other graph-smoothing enhancements, it greatly
compresses the space needed to display certain histories:
*
|\
| * *
| |\ |\
| | * | *
| | | | |\
| | \ | | *
| *-. \ | * |
| |\ \ \ => |/|\|
|/ / / / | | *
| | | / | * |
| | |/ | |/
| | * * /
| * | |/
| |/ *
* |
|/
*
One of the test cases here cannot be correctly rendered in Git v2.23.0;
it produces this output following commit E:
| | *-. \ 5_E
| | |\ \ \
| |/ / / /
| | | / _
| |_|/
|/| |
The new implementation makes sure that the rightmost edge in this
history is not left dangling as above.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a graph contains edges that are in the process of collapsing to the
left, but those edges cross a commit line, the effect is that the edges
have a jagged appearance:
*
|\
| *
| \
*-. \
|\ \ \
| | * |
| * | |
| |/ /
* | |
|/ /
* |
|/
*
We already takes steps to smooth edges like this when they're expanding;
when an edge appears to the right of a merge commit marker on a
GRAPH_COMMIT line immediately following a GRAPH_POST_MERGE line, we
render it as a `\`:
* \
|\ \
| * \
| |\ \
We can make a similar improvement to collapsing edges, making them
easier to follow and giving the overall graph a feeling of increased
symmetry:
*
|\
| *
| \
*-. \
|\ \ \
| | * |
| * | |
| |/ /
* / /
|/ /
* /
|/
*
To do this, we introduce a new special case for edges on GRAPH_COMMIT
lines that immediately follow a GRAPH_COLLAPSING line. By retaining a
copy of the `mapping` array used to render the GRAPH_COLLAPSING line in
the `old_mapping` array, we can determine that an edge is collapsing
through the GRAPH_COMMIT line and should be smoothed.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The change I'm about to make requires being able to inspect the mapping
array that was used to render the last GRAPH_COLLAPSING line while
rendering a GRAPH_COMMIT line. The `new_mapping` array currently exists
as a pre-allocated space for computing the next `mapping` array during
`graph_output_collapsing_line()`, but we can repurpose it to let us see
the previous `mapping` state.
To support this use it will make more sense if this array is named
`old_mapping`, as it will contain the mapping data for the previous line
we rendered, at the point we're rendering a commit line.
Signed-off-by: James Coglan <jcoglan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
