It's legitimate to update the mergeinfo property without
actually changing any files. This can happen when changes are
backported to a branch, and then that branch is merged back
into mainline. We still want to record the updated mergeinfo
for book-keeping.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
This extends the earlier approach to stream a large file directly from the
filesystem to its own packfile, and allows "git add" to send large files
directly into a single pack. Older code used to spawn fast-import, but the
new bulk-checkin API replaces it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to be able to rewind a check-summed file to a certain
previous state after writing data into it using sha1write() API. The
fast-import command does this after streaming a blob data to the packfile
being generated and then noticing that the same blob has already been
written, and it does this with a private code truncate_pack() that is
commented as "Yes, this is a layering violation".
Introduce two API functions, sha1file_checkpoint(), that allows the caller
to save a state of a sha1file, and then later revert it to the saved state.
Use it to reimplement truncate_pack().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"commit --amend" could fail in cases like the user empties the commit
message, or pre-commit failed. When it fails, rebase should be
interrupted and alert the user, rather than ignoring the error and
continue on rebasing. This also gives users a way to gracefully
interrupt a "reword" if they decided they actually want to do an "edit",
or even "rebase --abort".
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On startup in multicommit mode git-gui checks to see if the repository
has a lot of objects. If so it shows a dialog suggesting gc be run.
This adds 'gui.gcwarning' as a control config variable to allow this
to be disabled. The default is true (the warning is shown). Setting this
false will prevent the check being done.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
This fixes the bug uncovered by the tests added in the previous two patches.
When an existing notes ref was loaded into the fast-import machinery, the
num_notes counter associated with that ref remained == 0, even though the
true number of notes in the loaded ref was higher. This caused a fanout
level of 0 to be used, although the actual fanout of the tree could be > 0.
Manipulating the notes tree at an incorrect fanout level causes removals to
silently fail, and modifications of existing notes to instead produce an
additional note (leaving the old object in place at a different fanout level).
This patch fixes the bug by explicitly counting the number of notes in the
notes tree whenever it looks like the num_notes counter could be wrong (when
num_notes == 0). There may be false positives (i.e. triggering the counting
when the notes tree is truly empty), but in those cases, the counting should
not take long.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch exposed a bug in fast-import where _removing_ an existing
note fails (when that note resides on a non-zero fanout level, and was added
prior to this fast-import run).
This patch demostrates the same issue when _changing_ an existing note
(subject to the same circumstances).
Discovered-by: Henrik Grubbström <grubba@roxen.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a bug in fast-import where the fanout levels of an existing notes
tree being loaded into the fast-import machinery is disregarded. Instead, any
tree loaded is assumed to have a fanout level of 0. If the true fanout level
is deeper, any attempt to remove a note from that tree will silently fail
(as the note will not be found at fanout level 0).
However, this bug was covered up by the way in which the t9301 testcase was
written: When generating the fast-import commands to test mass removal of
notes, we appended these commands to an already existing 'input' file which
happened to already contain the fast-import commands used in the previous
subtest to generate the very same notes tree. This would normally be harmless
(but suboptimal) as the notes created were identical to the notes already
present in the notes tree. But the act of repeating all the notes additions
caused the internal fast-import data structures to recalculate the fanout,
instead of hanging on to the initial (incorrect) fanout (that causes the bug
described above). Thus, the subsequent removal of notes in the same 'input'
file would succeed, thereby covering up the bug described above.
This patch creates a new 'input' file instead of appending to the file from
the previous subtest. Thus, we end up properly testing removal of notes that
were added by a previous fast-import command. As a side effect, the notes
removal can no longer refer to commits using the marks set by the previous
fast-import run, instead the commits names must be referenced directly.
The underlying fast-import bug is still present after this patch, but now we
have at least uncovered it. Therefore, the affected subtests are labeled as
expected failures until the underlying bug is fixed.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When on master, "git checkout -B master <commit>" is a more natural way to
say "git reset --keep <commit>", which was originally invented for the
exact purpose of moving to the named commit while keeping the local changes
around.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Overwriting the current branch with a different commit is forbidden, as it
will make the status recorded in the index and the working tree out of
sync with respect to the HEAD. There however is no reason to forbid it if
the current branch is renamed to itself, which admittedly is something
only an insane user would do, but is handy for scripts.
Test script is by Conrad Irwin.
Reported-by: Soeren Sonnenburg <sonne@debian.org>
Reported-by: Josh Chia (谢任中)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There may not be enough space to store CRLF in the output. If we don't
fill the buffer, then the filter will keep getting called with the same
short buffer and will loop forever.
Instead, always store the CR and record whether there's a missing LF
if so we store it in the output buffer the next time the function gets
called.
Reported-by: Henrik Grubbström <grubba@roxen.com>
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ignored files usually are generated files (e.g. .o files) and can be
safely discarded. However sometimes users may have important files in
working directory, but still want a clean "git status", so they mark
them as ignored files. But in this case, these files should not be
overwritten without asking first.
Enable this use case with --no-overwrite-ignore, where git only sees
tracked and untracked files, no ignored files. Those who mix
discardable ignored files with important ones may have to sort it out
themselves.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in 1127148 (Loosen "working file will be lost" check in
Porcelain-ish - 2006-12-04), git-checkout.sh learned to quietly
overwrite ignored files. Howver the code only took .gitignore files
into account.
Standard ignored files include all specified in .gitignore files in
working directory _and_ $GIT_DIR/info/exclude. This patch makes sure
ignored files in info/exclude can also be overwritten automatically in
the spirit of the original patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint: (18123 commits)
documentation fix: git difftool uses diff tools, not merge tools.
Git 1.7.7.4
Makefile: add missing header file dependencies
notes merge: eliminate OUTPUT macro
mailmap: xcalloc mailmap_info
name-rev --all: do not even attempt to describe non-commit object
Git 1.7.7.3
docs: Update install-doc-quick
docs: don't mention --quiet or --exit-code in git-log(1)
Git 1.7.7.2
t7511: avoid use of reserved filename on Windows.
clone: Quote user supplied path in a single quote pair
read-cache.c: fix index memory allocation
make the sample pre-commit hook script reject names with newlines, too
Reindent closing bracket using tab instead of spaces
Git 1.7.7.1
RelNotes/1.7.7.1: setgid bit patch is about fixing "git init" via Makefile setting
gitweb: fix regression when filtering out forks
Almost ready for 1.7.7.1
pack-objects: don't traverse objects unnecessarily
...
Conflicts:
imap-send.c
The second mode of 'git reset' is defined by the --patch
option, while the third mode is defined by the <mode> option.
Hence, these options are mandatory in the description of the
individual modes.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --force should not put us in 'create branch' mode. The
fact that this option is only valid in 'create branch' mode is
already caught by the the next 'if' in which we assure that we
are in the correct mode.
Without this patch, "git branch -f" without any other argument ends
up calling create_branch without any branch name.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git cherry-pick --abort" command currently renames the
.git/sequencer directory to .git/sequencer-old instead of removing it
on success due to an accident. cherry-pick --abort is designed to
work in three steps:
1) find which commit to roll back to
2) call "git reset --merge <commit>" to move to that commit
3) remove the .git/sequencer directory
But the careless author forgot step 3 entirely. The only reason the
command worked anyway is that "git reset --merge <commit>" renames the
.git/sequencer directory as a secondary effect --- after moving to
<commit>, or so the logic goes, it is unlikely but possible that the
caller of git reset wants to continue the series of cherry-picks that
was in progress, so git renames the sequencer state to
.git/sequencer-old to be helpful while allowing the cherry-pick to be
resumed if the caller did not want to end the sequence after all.
By running "git cherry-pick --abort", the operator has clearly
indicated that she is not planning to continue cherry-picking. Remove
the (renamed) .git/sequencer directory as intended all along.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, it is not possible to rename or remove a directory that has
open files. 'revert --abort' renamed .git/sequencer when it still had
.git/sequencer/head open. Close the file as early as possible to allow
the rename operation on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the following warning.
CC builtin/revert.o
builtin/revert.c: In function ‘write_cherry_pick_head’:
builtin/revert.c:311: warning: format not a string literal and no format arguments
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "git cherry-pick --reset" option, which has a different
preferred spelling nowadays ("--quit"). Luckily the old --reset name
was not around long enough for anyone to get used to it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running some ill-advised command like "git cherry-pick
HEAD..linux-next", the bewildered novice may want to return to more
familiar territory. Introduce a "git cherry-pick --abort" command
that rolls back the entire cherry-pick sequence and places the
repository back on solid ground.
Just like "git merge --abort", this internally uses "git reset
--merge", so local changes not involved in the conflict resolution are
preserved.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When conflicts are encountered while reverting a commit, it can be
handy to have the name of that commit easily available. For example,
to produce a copy of the patch to refer to while resolving conflicts:
$ git revert 2eceb2a8
error: could not revert 2eceb2a8... awesome, buggy feature
$ git show -R REVERT_HEAD >the-patch
$ edit $(git diff --name-only)
Set a REVERT_HEAD pseudoref when "git revert" does not make a commit,
for cases like this. This also makes it possible for scripts to
distinguish between a revert that encountered conflicts and other
sources of an unmerged index.
After successfully committing, resetting with "git reset", or moving
to another commit with "git checkout" or "git reset", the pseudoref is
no longer useful, so remove it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the spirit of v1.6.3.3~3^2 (refuse to merge during a merge,
2009-07-01), "git cherry-pick" refuses to start a new cherry-pick when
in the middle of an existing conflicted cherry-pick in the following
sequence:
1. git cherry-pick HEAD..origin
2. resolve conflicts
3. git cherry-pick HEAD..origin (instead of "git cherry-pick
--continue", by mistake)
Good. However, the error message on attempting step 3 is more
convoluted than necessary:
$ git cherry-pick HEAD..origin
error: .git/sequencer already exists.
error: A cherry-pick or revert is in progress.
hint: Use --continue to continue the operation
hint: or --quit to forget about it
fatal: cherry-pick failed
Clarify by removing the redundant first "error:" message, simplifying
the advice, and using lower-case and no full stops to be consistent
with other commands that prefix their messages with "error:", so it
becomes
error: a cherry-pick or revert is already in progress
hint: try "git cherry-pick (--continue | --quit)"
fatal: cherry-pick failed
The "fatal: cherry-pick failed" line seems unnecessary, too, but
that can be fixed some other day.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deal completely with "cherry-pick --quit" and --continue at the
beginning of pick_revisions(), leaving the rest of the function for
the more interesting "git cherry-pick <commits>" case.
No functional change intended. The impact is just to unindent the
code a little.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option to "git cherry-pick" and "git revert" to discard the
sequencer state introduced by v1.7.8-rc0~141^2~6 (revert: Introduce
--reset to remove sequencer state, 2011-08-04) has a confusing name.
Change it now, while we still have the time.
The new name for "cherry-pick, please get out of my way, since I've
long forgotten about the sequence of commits I was cherry-picking when
you wrote that old .git/sequencer directory" is --quit. Mnemonic:
this is analagous to quiting a program the user is no longer using ---
we just want to get out of the multiple-command cherry-pick procedure
and not to reset HEAD or rewind any other old state.
The "--reset" option is kept as a synonym to minimize the impact. We
might consider dropping it for simplicity in a separate patch, though.
Adjust documentation and tests to use the newly preferred name (--quit)
instead of --reset. While at it, let's clarify the short descriptions
of these operations in "-h" output.
Before:
--reset forget the current operation
--continue continue the current operation
After:
--quit end revert or cherry-pick sequence
--continue resume revert or cherry-pick sequence
Noticed-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually git is careful not to allow clients to fetch
arbitrary objects from the database; for example, objects
received via upload-pack must be reachable from a ref.
Upload-archive breaks this by feeding the client's tree-ish
directly to get_sha1, which will accept arbitrary hex sha1s,
reflogs, etc.
This is not a problem if all of your objects are publicly
reachable anyway (or at least public to anybody who can run
upload-archive). Or if you are making the repo available by
dumb protocols like http or rsync (in which case the client
can read your whole object db directly).
But for sites which allow access only through smart
protocols, clients may be able to fetch trees from commits
that exist in the server's object database but are not
referenced (e.g., because history was rewound).
This patch tightens upload-archive's lookup to use dwim_ref
rather than get_sha1. This means a remote client can only
fetch the tip of a named ref, not an arbitrary sha1 or
reflog entry.
This also restricts some legitimate requests, too:
1. Reachable non-tip commits, like:
git archive --remote=$url v1.0~5
2. Sub-trees of reachable commits, like:
git archive --remote=$url v1.7.7:Documentation
Local requests continue to use get_sha1, and are not
restricted at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The POSIX-function fork is not supported on Windows. Use our
start_command API instead, respawning ourselves in a special
"writer" mode to follow the alternate code path.
Remove the NOT_MINGW-prereq for t5000, as git-archive --remote
now works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_path_check_eol() function converts a string value to the
corresponding 'enum eol' value. However, the function is currently
declared to return an 'enum crlf_action', which causes sparse to
complain thus:
SP convert.c
convert.c:736:50: warning: mixing different enum types
convert.c:736:50: int enum crlf_action versus
convert.c:736:50: int enum eol
In order to suppress the warning, we simply correct the return type
in the function declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git merge' can be called without any arguments if merge.defaultToUpstream
is set. However, when merge.defaultToUpstream is not set, the user will be
presented the usage information as if he entered a command with a wrong
syntaxis. Ironically, the usage information confirms that no arguments are
mandatory.
This adds a proper error message telling the user why the command failed. As
a side-effect this can help the user in discovering the possibility to merge
with the upstream branch by setting merge.defaultToUpstream.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let the documentation for -t list valid *diff* tools,
not valid *merge* tools.
Signed-off-by: Thomas Hochstein <thh@inter.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On cygwin, test number 21 of t3200-branch.sh (git branch -m q q2
without config should succeed) fails. The failure involves the
functions from path.c which parcel out internal static buffers
from the git_path() and mkpath() functions.
In particular, the rename_ref() function calls safe_create_leading\
_directories() with a filename returned by git_path("logs/%s", ref).
safe_create_leading_directories(), in turn, calls stat() on each
element of the path it is given. On cygwin, this leads to a call
to git_config() for each component of the path, since this test
explicitly removes the config file. git_config() calls mkpath(), so
on the fourth component of the path, the original buffer passed
into the function is overwritten with the config filename.
Note that this bug is specific to cygwin and it's schizophrenic
stat() functions (see commits adbc0b6, 7faee6b and 7974843). The
lack of a config file and a path with at least four elements is
also important to trigger the bug.
In order to fix the problem, we replace the call to mkpath() with
a call to mksnpath() and provide our own buffer.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, the url passed to git-clone has an extra '/' given
after the 'file://' schema prefix, thus:
git clone --reference=original "file:///$(pwd)/original one
Once the prefix is removed, the remainder of the url looks something
like "//home/ramsay/git/t/...", which is then interpreted as an
network path. This then results in a "Permission denied" error, like
so:
ramsay $ ls //home
ls: cannot access //home: No such host or network path
ramsay $ ls //home/ramsay
ls: cannot access //home/ramsay: Permission denied
ramsay $
In order to fix the problem, we simply remove the extraneous '/'
character from the url.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rr/misc-fixes:
git-compat-util: don't assume value for undefined variable
sha1_file: don't mix enum with int
convert: don't mix enum with int
http: remove unused function hex()
If you have a deleted file and a porcelain refreshes the
cache, we print:
Unstaged changes after reset:
M file
This is technically correct, in that the file is modified,
but it's friendlier to the user if we further differentiate
the case of a deleted file (especially because this output
looks a lot like "diff --name-status", which would also make
the distinction).
Similarly, we can distinguish typechanges ("T") and
intent-to-add files ("A"), both of which appear as just "M"
in the current output.
The plumbing output for all cases remains "needs update" for
historical compatibility.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refreshing the index, for modified (or unmerged) files we will print
"needs update" (or "needs merge") for plumbing, or line similar to the
output from "diff --name-status" for porcelain.
The variables holding which type of message to show are named after the
plumbing messages. However, as we begin to differentiate more cases at the
porcelain level (with the plumbing message staying the same), that naming
scheme will become awkward.
Instead, name the variables after which case we found (modified or
unmerged), not what we will output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will enable refresh_cache to differentiate more cases
of modification (such as typechange) when telling the user
what isn't fresh.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the COMPUTE_HEADER_DEPENDENCIES feature is turned on
automatically for compilers that support it (see v1.7.8-rc0~142^2~1,
2011-08-18), there is no easy way to force it off. For example,
setting COMPUTE_HEADER_DEPENDENCIES to the empty string in config.mak
just tells the makefile to treat it as undefined and run a test
command to see if the -MMD option is supported.
So allow setting COMPUTE_HEADER_DEPENDENCIES=no to explicitly force
the feature off. The new semantics:
- "yes" means to explicitly enable the feature
- "no" means to disable it
- "auto" means to autodetect
The default is still "auto". Any value other than these three will
cause the build to error out with a descriptive message so typos and
stale settings in config.mak don't result in mysterious behavior.
Makefile:1278: *** please set COMPUTE_HEADER_DEPENDENCIES to
yes, no, or auto (not "1"). Stop.
So now when someone using a compiler without -MMD support reports
trouble building git, you can reproduce it by running "make
COMPUTE_HEADER_DEPENDENCIES=no".
Suggested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
