Mode-only changes to binary files without content change were reported as
if they were rewritten, but text files in the same situation were reported
as "unchanged". Let's treat binary files like text files here, and simply
say that they are unchanged.
Output of --shortstat is modified in the same way.
Reported-by: Martin Mareš <mj@ucw.cz>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parser in "fast-import" did not diagnose ":9" style references that is
not followed by required SP/LF as an error.
By Pete Wyckoff
* pw/fast-import-dataref-parsing:
fast-import: tighten parsing of datarefs
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl, may
fail to hold all of them. Now such an internal invocation can feed the
references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
Conflicts:
t/t5500-fetch-pack.sh
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
Giving "--continue" to a conflicted "rebase -i" session skipped a
commit that only results in changes to submodules.
By John Keeping
* jk/rebase-i-submodule-conflict-only:
rebase -i continue: don't skip commits that only change submodules
The current code runs "perl gitweb.cgi" to test gitweb. This
will use whatever version of perl happens to be first in the
PATH. We are better off using the specific perl that the
user specified via PERL_PATH, which matches what gets put on
the #!-line of the built gitweb.cgi.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to check 'diff --stat' output with a text file after chmod,
and the same for a binary file. This demonstrates that text and binary
files are treated differently, which can be misleading.
While at it, add tests to check --shortstat output, too.
Reported-by: Martin Mareš <mj@ucw.cz>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct output would have NUL after each commit, so "-z --format=%s"
would have a single-liner subject with the line-terminating LF replaced
with NUL, and "-p/--stat -z --format=%s" would have a single-liner subject
with its line-terminating LF, followed by the diff/diffstat in which the
terminating LF of the last line is replaced with NUL, but to be consistent
with what "-p/--stat -z --pretty=format:%s" does, I think it is OK to
append NUL to the diff/diffstat part instead of replacing its last LF with
NUL.
The added test shows the update is still not right for "-p -z --format".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a custom format in line termination mode (as opposed to line
separation mode), the configured line terminator is not used, so things
like "git log --pretty=tformat:%H -z" do not work properly.
Make it use the line terminator the user ordered.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we tested only that "push --quiet --no-progress"
was silent. However, there are many other combinations that
were not tested:
1. no options at all (but stderr as a tty)
2. --no-progress by itself
3. --quiet by itself
4. --progress (when stderr not a tty)
These are tested elsewhere for general "push", but it is
important to test them separately for http. It follows a
very different code path than git://, and options must be
relayed across a remote helper to a separate send-pack
process (and in fact cases (1), (2), and (4) have all been
broken just for http at some point in the past).
We can drop the "--quiet --no-progress" test, as it is not
really interesting (it is already handled by testing them
separately in (2) and (3) above).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option. They
are stored in %xx notation, and when checked out, p4 converts
them back to normal.
When adding files with wildcards in git, the submit path must
be careful to use the encoded names in some places, and it
must use "-f" to add them. All other p4 commands that operate
on the client directory expect encoded filenames as arguments.
Support for wildcards in the clone/sync path was added in
084f630 (git-p4: decode p4 wildcard characters, 2011-02-19),
but that change did not handle the submit path.
There was a problem with wildcards in the sync path too. Commit
084f630 (git-p4: decode p4 wildcard characters, 2011-02-19)
handled files with p4 wildcards that were added or modified in
p4. Do this for deleted files, and also in branch detection
checks, too.
Reported-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way rename works is with a "p4 integrate", optionally
followed by a "p4 edit" if the change is not a 100% rename.
Contents are generated by applying a patch, not doing a file
system rename. Copy is similar.
In this case, p4 does not fix the permissions back to read-only.
Make sure this happens by calling "p4 sync -f".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try each of the five diff patterns that might happen during submit.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to auto-create the client directory, added in 0591cfa
(git-p4: ensure submit clientPath exists before chdir,
2011-12-09), works when the client directory never existed.
But if the directory is summarily removed without telling p4,
the sync operation will not bring back all the files. Always
do "sync -f" if the client directory is newly created.
Reported-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Luke Diamand
* ld/git-p4-tags-and-labels:
git p4: fix unit tests
git p4: move verbose to base class
git p4: Ignore P4EDITOR if it is empty
git p4: Squash P4EDITOR in test harness
git p4: fix-up "import/export of labels to/from p4"
git p4: import/export of labels to/from p4
git p4: Fixing script editor checks
"git rebase" learned to optionally keep commits that do not introduce
any change in the original history.
By Neil Horman
* nh/empty-rebase:
git-rebase: add keep_empty flag
git-cherry-pick: Add test to validate new options
git-cherry-pick: Add keep-redundant-commits option
git-cherry-pick: add allow-empty option
"git config --rename-section" to rename an existing section into a
bogus one did not check the new name.
By Jeff King
* jk/maint-config-bogus-section:
config: reject bogus section names for --rename-section
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell construct to launch git-daemon and wait for it to start
serving during the test was faulty, and this fixes it.
By Johannes Sixt
* js/daemon-test-race-fix:
t5570: fix forwarding of git-daemon messages via cat
The new "include.path" directive in the configuration files learned
to understand "~/path" and "~user/path".
By Jeff King
* mm/include-userpath:
config: expand tildes in include.path variable
Longstanding bug in a test scaffolding that occasionally made t5800
hang was fixed.
By Pete Wyckoff
* pw/t5800-import-race-fix:
git-remote-testgit: fix race when spawning fast-import
Avoid writing out unreachable objects as loose objects when repacking,
if such loose objects will immediately pruned due to its age anyway.
By Jeff King
* jk/repack-no-explode-objects-from-old-pack:
gc: use argv-array for sub-commands
argv-array: add a new "pushl" method
argv-array: refactor empty_argv initialization
gc: do not explode objects which will be immediately pruned
You can already use relative paths in include.path, which
means that including "foo" from your global "~/.gitconfig"
will look in your home directory. However, you might want to
do something clever like putting "~/.gitconfig-foo" in a
specific repository's config file.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Octopus merge strategy did not reduce heads that are recorded in the
final commit correctly.
By Junio C Hamano (4) and Michał Kiedrowicz (1)
* jc/merge-reduce-parents-early:
fmt-merge-msg: discard needless merge parents
builtin/merge.c: reduce parents early
builtin/merge.c: collect other parents early
builtin/merge.c: remove "remoteheads" global variable
merge tests: octopus with redundant parents
Fixes http authentication breakage when we keep multiple HTTP requests in
flight using curl-multi.
By Jeff King (3) and Clemens Buchacher (1)
* cb/http-multi-curl-auth:
http: use newer curl options for setting credentials
http: clean up leak in init_curl_http_auth
fix http auth with multiple curl handles
http auth fails with multiple curl handles
Normally all cells (and in turn columns) share the same width. This
layout mode can waste space because one long item can stretch our all
columns.
With COL_DENSE enabled, column width is calculated indepdendently. All
columns are shrunk to minimum, then it attempts to push cells of the
last row over to the next column with hope that everything still fits
even there's one row less. The process is repeated until the new layout
cannot fit in given width any more, or there's only one row left
(perfect!).
Apparently, this mode consumes more cpu than the old one, but it makes
better use of terminal space. For layouting one or two screens, cpu
usage should not be detectable.
This patch introduces option handling code besides layout modes and
enable/disable to expose this feature as "dense". The feature can be
turned off by specifying "nodense".
Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t9002-column.sh, file with expected output was shared between two
test cases, but set in the first one. Since the first test case can
now be skipped, setting up the expected output is moved outside of the
test case.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
COL_COLUMN and COL_ROW fill column by column (or row by row
respectively), given the terminal width and how many space between
columns. All cells have equal width.
Strings are supposed to be in UTF-8. Valid ANSI escape strings are OK.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mksh does not allow $COLUMNS to be set below 12. mksh(1) says that
$COLUMNS is "always set, defaults to 80, unless the value as reported
by stty(1) is non-zero and sane enough". This applies also to setting
it directly for one command:
$ COLUMNS=10 python -c 'import os; print os.environ["COLUMNS"]'
98
Add a test prerequisite by checking if we can set COLUMNS=1, to allow
us to skip tests that needs it.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A column option string consists of many token separated by either
a space or a comma. A token belongs to one of three groups:
- enabling: always, never and auto
- layout mode: currently plain (which does not layout at all)
- other future tuning flags
git-column can be used to pipe output to from a command that wants
column layout, but not to mess with its own output code. Simpler output
code can be changed to use column layout code directly.
Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell function that starts git-daemon wants to read the first line of
the daemon's stderr to ensure that it started correctly. Subsequent daemon
errors should be redirected to fd 4 (which is the terminal in verbose mode
or /dev/null in quiet mode). To that end the shell script used 'read' to
get the first line of output, and then 'cat &' to forward everything else
in a background process.
The problem is, that 'cat >&4 &' does not produce any output because the
shell redirects a background process's stdin to /dev/null. To have this
command invocation do anything useful, we have to redirect its stdin
explicitly (which overrides the /dev/null redirection).
The shell function connects the daemon's stderr to its consumers via a
FIFO. We cannot just do this:
read line <git_daemon_output
cat <git_daemon_output >&4 &
because after the first redirection the pipe is closed and the daemon
could receive SIGPIPE if it writes at the wrong moment. Therefore, we open
the readable end of the FIFO only once on fd 7 in the shell and dup from
there to the stdin of the two consumers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The report from "git fetch" said "new branch" even for a non branch
ref.
By Marc Branchaud
* mb/fetch-call-a-non-branch-a-ref:
fetch: describe new refs based on where it came from
fetch: Give remote_ref to update_local_ref() as well
When PATH contains an unreadable directory, alias expansion code did
not kick in, and failed with an error that said "git-subcmd" was not
found.
By Jeff King (1) and Ramsay Jones (1)
* jk/run-command-eacces:
run-command: treat inaccessible directories as ENOENT
compat/mingw.[ch]: Change return type of exec functions to int
The 'push to upstream' implementation was broken in some corner
cases. "git push $there" without refspec, when the current branch is
set to push to a remote different from $there, used to push to $there
using the upstream information to a remote unreleated to $there.
* jc/push-upstream-sanity:
push: error out when the "upstream" semantics does not make sense
"git clean -d -f" (not "-d -f -f") is supposed to protect nested
working trees of independent git repositories that exist in the
current project working tree from getting removed, but the protection
applied only to such working trees that are at the top-level of the
current project by mistake.
* jc/maint-clean-nested-worktree-in-subdir:
clean: preserve nested git worktree in subdirectories
Rename detection logic used to match two empty files as renames during
merge-recursive, leading unnatural mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
When "git commit --template F" errors out because the user did not
touch the message, it claimed that it aborts due to "empty message",
which was utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
"git add -p" is not designed to deal with unmerged paths but did
not exclude them and tried to apply funny patches only to fail.
By Jeff King
* jk/add-p-skip-conflicts:
add--interactive: ignore unmerged entries in patch mode
"git commit --author=$name" did not tell the name that was being
recorded in the resulting commit to hooks, even though it does do so
when the end user overrode the authorship via the "GIT_AUTHOR_NAME"
environment variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
The regexp configured with diff.wordregex was incorrectly reused
across files.
By Thomas Rast (2) and Johannes Sixt (1)
* tr/maint-word-diff-regex-sticky:
diff: tweak a _copy_ of diff_options with word-diff
diff: refactor the word-diff setup from builtin_diff_cmd
t4034: diff.*.wordregex should not be "sticky" in --word-diff
Running "notes merge --commit" failed to perform correctly when run
from any directory inside $GIT_DIR/. When "notes merge" stops with
conflicts, $GIT_DIR/NOTES_MERGE_WORKTREE is the place a user edits
to resolve it.
By Johan Herland (3) and Junio C Hamano (1)
* jh/notes-merge-in-git-dir-worktree:
notes-merge: Don't remove .git/NOTES_MERGE_WORKTREE; it may be the user's cwd
notes-merge: use opendir/readdir instead of using read_directory()
t3310: illustrate failure to "notes merge --commit" inside $GIT_DIR/
remove_dir_recursively(): Add flag for skipping removal of toplevel dir
You can feed junk to "git config --rename-section", which
will result in a config file that git will not even parse
(so you cannot fix it with git-config). We already have
syntactic sanity checks when setting a variable; let's do
the same for section names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submit-edit tests relied on P4EDITOR being unset. Set it
explicitly to an empty string.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default mode for push without arguments will change. Some warnings
are about to be enabled for such use, which causes some t5570 tests to
fail because they do not expect this output.
Fix this by passing an explicit refspec to git push. To that end, change
the calling conventions of test_remote_error in order to accomodate
extra command arguments.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git push" without argument, we want to allow Git to do
something simple to explain and safe. push.default=matching is unsafe
when used to push to shared repositories, and hard to explain to
beginners in some contexts. It is debatable whether 'upstream' or
'current' is the safest or the easiest to explain, so introduce a new
mode called 'simple' that is the intersection of them: push to the
upstream branch, but only if it has the same name remotely. If not, give
an error that suggests the right command to push explicitely to
'upstream' or 'current'.
A question is whether to allow pushing when no upstream is configured. An
argument in favor of allowing the push is that it makes the new mode work
in more cases. On the other hand, refusing to push when no upstream is
configured encourages the user to set the upstream, which will be
beneficial on the next pull. Lacking better argument, we chose to deny
the push, because it will be easier to change in the future if someone
shows us wrong.
Original-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test "pushing to local repo" in t5800-remote-helpers can hang
due to a race condition in git-remote-testgit. Fix it by
setting stdin to unbuffered.
On the writer side, "git push" invokes push_refs_with_export(),
which sends to stdout the command "export\n" and immediately
starts up "git fast-export". The latter writes its output stream
to the same stdout.
On the reader side, remote helper "git-remote-testgit" reads from
stdin to get its next command. It uses getc() to read characters
from libc up until \n. Libc has buffered a potentially much
larger chunk of stdin. When it sees the "export\n" command, it
forks "git fast-import" to read the stream.
If fast-export finishes before git fast-import starts, the
fast-export output can end up in libc's buffer in
git-remote-testgit, rather than in git fast-import. The latter
hangs indefinitely on a now-empty stdin.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we've added the --allow-empty and --keep-redundant-commits
options to git cherry-pick we should also add a test to ensure that its working
properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Felipe Contreras (4) and others
* fc/completion-tests:
completion: fix completion after 'git --option <TAB>'
completion: avoid trailing space for --exec-path
completion: add missing general options
completion: simplify by using $prev
completion: simplify __gitcomp_1
tests: add tests for the __gitcomp() completion helper function
tests: add initial bash completion tests
Error message given when @{u} is used for a branch without its
upstream configured have been clatified.
By Zbigniew Jędrzejewski-Szmek
* zj/upstream-error-message:
i18n: mark @{upstream} error messages for translation
Be more specific if upstream branch is not tracked
Provide better message for barnhc_wiht_tpyo@{u}
Provide branch name in error message when using @{u}
t1507: add tests to document @{upstream} behaviour
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl,
may fail to hold all of them. Now such an internal invocation can feed
the references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
The parser in "fast-import" did not diagnose ":9" style references
that is not followed by required SP/LF as an error.
By Pete Wyckoff
* pw/fast-import-dataref-parsing:
fast-import: tighten parsing of datarefs
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
If P4EDITOR is set in the environment, test behavior could be
unpredictable. Set it explicitly.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one is already in 'next' but was somewhat lacking.
The configuration "git-p4.validLabelRegexp" is now called
"labelExportRegexp", and its default covers lowercase alphabets as
well.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix two places that were the only place in the test suite that gave "a\+"
to platform grep and expected it to mean one or more "a", which is a
blatant GNUism.
* bw/test-fix-grep-gnuism:
t9400: fix gnuism in grep
By Jonathan Nieder
* jn/more-i18ncmp:
test: am of empty patch should not succeed
test: use test_i18ncmp for "Patch format detection failed" message
test: do not rely on US English tracking-info messages
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
"git rev-parse --show-prefix" emitted nothing when run at the
top-level of the working tree, while "git rev-parse --show-cdup" gave
an empty line. Make them consistent.
By Ross Lagerwall
* rl/show-empty-prefix:
rev-parse --show-prefix: add in trailing newline
Giving "--continue" to a conflicted "rebase -i" session skipped a commit
that only results in changes to submodules.
By John Keeping
* jk/rebase-i-submodule-conflict-only:
rebase -i continue: don't skip commits that only change submodules
Since bc7a96a (mergetool--lib: Refactor tools into separate files,
2011-08-18), it is possible to add a new diff tool by creating a simple
script in the '$(git --exec-path)/mergetools' directory. Updating the
difftool help text is still a manual process, and the documentation can
easily go out of sync.
This commit teaches difftool the '--tool-help' option, which:
- Reads the list of valid tools from 'mergetools/*'
- Determines which of them are actually installed
- Determines which are capable of diffing (i.e. not just a merge tool)
- Prints the resulting list for the user
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'difftool' is called to compare a range of commits that modify
more than one file, it opens a separate instance of the diff tool for
each file that changed.
The new '--dir-diff' option copies all the modified files to a temporary
location and runs a directory diff on them in a single instance of the
diff tool.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash completion doesn't work when certain options to git itself are
specified, e.g. 'git --no-pager <TAB>' errors out with
error: invalid key: alias.--no-pager
The main _git() completion function finds out the git command name by
looping through all the words on the command line and searching for
the first word that is not a known option for the git command.
Unfortunately the list of known git options was not updated in a long
time, and newer options are not skipped but mistaken for a git command.
Such a misrecognized "command" is then passed to __git_aliased_command(),
which in turn passes it to a 'git config' query, hence the error.
Currently the following options are misrecognized for a git command:
-c --no-pager --exec-path --html-path --man-path --info-path
--no-replace-objects --work-tree= --namespace=
To fix this we could just update the list of options to be skipped,
but the same issue will likely arise, if the git command learns a new
option in the future. Therefore, to make it more future proof against
new options, this patch changes that loop to skip all option-looking
words, i.e. words starting with a dash.
We also have to handle the '-c' option specially, because it takes a
configutation parameter in a separate word, which must be skipped,
too.
[fc: added tests]
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"--exec-path" looks to the completion script like an unambiguous
successful completion, but it is wrong to emit a SP after it as if
declaring that we are done with completion; the user could be trying
to do
git --exec-path; # print name of helper directory
or
git --exec-path=/path/to/alternative/helper/dir <subcommand>
so the most helpful thing to do is to leave out the trailing space and
leave it to the operator to type an equal sign or carriage return
according to the situation.
[fc: added tests]
Cc: Andreas Schwab <schwab@linux-m68k.org>
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests check that trailing space, prefix, and suffix are added
correctly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Break down the cases in which "git push" fails due to non-ff into
three categories, and give separate advise messages for each case.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
When PATH contains an unreadable directory, alias expansion code did not
kick in, and failed with an error that said "git-subcmd" was not found.
By Jeff King (1) and Ramsay Jones (1)
* jk/run-command-eacces:
run-command: treat inaccessible directories as ENOENT
compat/mingw.[ch]: Change return type of exec functions to int
Fix broken 'push to upstream' implementation. "git push $there" without
refspec, when the current branch is set to push to a remote different from
$there, used to push to $there using the upstream information to a remote
unreleated to $there.
* jc/push-upstream-sanity:
push: error out when the "upstream" semantics does not make sense
The "fmt-merge-msg" command learns to list the primary contributors
involved in the side topic you are merging.
* jc/fmt-merge-msg-people:
fmt-merge-msg: show those involved in a merged series
Exiting from a for-loop early using '|| break' does not propagate the
failure code, and for this reason, the tests used just 'exit'. But this
ends the test script with 'FATAL: Unexpected exit code 1' in the case of
a failed test.
Fix this by moving the loop into a shell function, from which we can
simply return early.
While at it, modernize the style of the affected test cases.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "\+" in "grep" and expecting that it means one or more
is a GNUism. Spell it in a dumb and portable way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is used by "git pull" to construct a merge message from list of
remote refs. When pulling redundant set of refs, however, it did not
filter them even though the merge itself discards them as unnecessary.
Teach the command to do the same for consistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When COLUMNS or --stat-width restricts the diff-stat width to near the
minimum, 26 columns, the graph_width value becomes negative. Consequently, the
graph part of diff-stat is not resized properly.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of waiting until we record the parents of resulting merge, reduce
redundant parents (including our HEAD) immediately after reading them.
The change to t7602 illustrates the essence of the effect of this change.
The octopus merge strategy used to be fed with redundant commits only to
discard them as "up-to-date", but we no longer feed such redundant commits
to it and the affected test degenerates to a regular two-head merge.
And obviously the known-to-be-broken test in t6028 is now fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This happens when git merge is run to merge multiple commits that are
descendants of current HEAD (or are HEAD). We've hit this while updating
master to origin/master but accidentaly we called (while being on master):
$ git merge master origin/master
Here is a minimal testcase:
$ git init a && cd a
$ echo a >a && git add a
$ git commit -minitial
$ echo b >a && git add a
$ git commit -msecond
$ git checkout master^
$ git merge master master
Fast-forwarding to: master
Already up-to-date with master
Merge made by the 'octopus' strategy.
a | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
$ git cat-file commit HEAD
tree eebfed94e75e7760540d1485c740902590a00332
parent bd679e85202280b263e20a57639a142fa14c2c64
author Michał Kiedrowicz <michal.kiedrowicz@gmail.com> 1329132996 +0100
committer Michał Kiedrowicz <michal.kiedrowicz@gmail.com> 1329132996 +0100
Merge branches 'master' and 'master' into HEAD
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
update_local_ref() used to say "[new branch]" when we stored a new ref
outside refs/tags/ hierarchy, but the message is more about what we
fetched, so use the refname at the origin to make that decision.
Also, only call a new ref a "branch" if it's under refs/heads/.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Excludes conflicted paths from "add -p" processing, as it is not prepared
to handle them.
By Jeff King
* jk/add-p-skip-conflicts:
add--interactive: ignore unmerged entries in patch mode
When "git commit --template F" errors out because the user did not touch
the message, it claimed that it aborts due to "empty message", which was
utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
Makes 'snapshot' request to "gitweb" honor If-Modified-Since: header,
based on the commit date.
By W. Trevor King
* wk/gitweb-snapshot-use-if-modified-since:
gitweb: add If-Modified-Since handling to git_snapshot().
gitweb: refactor If-Modified-Since handling
gitweb: add `status` headers to git_feed() responses.
The smart-http backend used to always override GIT_COMMITTER_* variables
with REMOTE_USER and REMOTE_ADDR.
By Jeff King
* jk/http-backend-keep-committer-ident-env:
http-backend: respect existing GIT_COMMITTER_* variables
Forbids rename detection logic from matching two empty files as renames
during merge-recursive to prevent mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
"git clean -d -f" (not "-d -f -f") is supposed to protect nested working
trees of independent git repositories that exist in the current project
working tree from getting removed, but the protection applied only to such
working trees that are at the top-level of the current project by mistake.
* jc/maint-clean-nested-worktree-in-subdir:
clean: preserve nested git worktree in subdirectories
Adjust tests to verify that the commit history graph tree is taken into
consideration when the diff stat output width is calculated.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests which show that the width of the --prefix added by --graph
is not taken into consideration when the diff stat output width is
calculated.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor improvement to t0303.
By Zbigniew Jędrzejewski-Szmek
* zj/test-cred-helper-nicer-prove:
t0303: resurrect commit message as test documentation
t0303: immediately bail out w/o GIT_TEST_CREDENTIAL_HELPER
Running "notes merge --commit" failed to perform correctly when run
from any directory inside $GIT_DIR/. When "notes merge" stops with
conflicts, $GIT_DIR/NOTES_MERGE_WORKTREE is the place a user edits
to resolve it.
By Johan Herland (3) and Junio C Hamano (1)
* jh/notes-merge-in-git-dir-worktree:
notes-merge: Don't remove .git/NOTES_MERGE_WORKTREE; it may be the user's cwd
notes-merge: use opendir/readdir instead of using read_directory()
t3310: illustrate failure to "notes merge --commit" inside $GIT_DIR/
remove_dir_recursively(): Add flag for skipping removal of toplevel dir
The regexp configured with wordregex was incorrectly reused across files.
By Thomas Rast (2) and Johannes Sixt (1)
* tr/maint-word-diff-regex-sticky:
diff: tweak a _copy_ of diff_options with word-diff
diff: refactor the word-diff setup from builtin_diff_cmd
t4034: diff.*.wordregex should not be "sticky" in --word-diff
Some tests checked the "diff --stat" output when they do not have to,
which unnecessarily made things harder to verify under GETTEXT_POISON.
By Jonathan Nieder
* jn/diffstat-tests:
diffstat summary line varies by locale: miscellany
test: use numstat instead of diffstat in binary-diff test
test: use --numstat instead of --stat in "git stash show" tests
test: test cherry-pick functionality and output separately
test: modernize funny-names test style
test: use numstat instead of diffstat in funny-names test
test: use test_i18ncmp when checking --stat output
"git commit --author=$name" did not tell the name that was being recorded
in the resulting commit to hooks, even though it does do so when the end
user overrode the authorship via the "GIT_AUTHOR_NAME" environment
variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
Use API to read blob data in smaller chunks in more places to reduce the
memory footprint.
By Nguyễn Thái Ngọc Duy (6) and Junio C Hamano (1)
* nd/stream-more:
update-server-info: respect core.bigfilethreshold
fsck: use streaming API for writing lost-found blobs
show: use streaming API for showing blobs
parse_object: avoid putting whole blob in core
cat-file: use streaming API to print blobs
Add more large blob test cases
streaming: make streaming-write-entry to be more reusable
If the branch configured as upstream didn't have a local tracking
branch, git said "Upstream branch not found". We can be more helpful,
and separate the cases when upstream is not configured, and when it is
configured, but the upstream branch is not tracked in a local branch.
The following configuration leads to the second scenario:
[remote "origin"]
url = ...
fetch = refs/heads/master
[branch "master"]
remote = origin
merge = refs/heads/master
'git pull' will work on master, but master@{upstream} is not defined.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just saying that no upstream exists for such branch,
which is true but not very helpful, check that there's no
refs/heads/barnhc_wiht_tpyo and tell it to the user.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using @{u} or @{upstream} it is common to omit the branch name,
implying current branch. If the upstream is not configured, the error
message was "No upstream branch found for ''".
When resolving '@{u}', branch_get() is called, which almost always
returns a description of a branch. This allows us to use a branch name
in the error message, even if the user said something like '@{u}'.
The only case when branch_get() returns NULL is when HEAD points to so
something which is not a branch. Of course this also means that no
upstream is configured, but it is better to directly say that HEAD
does not point to a branch.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for future changes, add tests which show error messages
with @{upstream} in various conditions:
- test branch@{u} with . as remote
- check error message for branch@{u} on a branch with
* no upstream,
* on a branch with a configured upstream which doesn't have a
remote-tracking branch
- check error message for branch@{u} when branch 'branch' does not
exist
- check error message for @{u} without the branch name
Right now the messages are very similar, but various cases can and
will be distinguished.
Note: test_i18ncmp is not used, because currently error output is not
internationalized. test_cmp will be switched to test_i18ncmp in a later
patch, when error messages are internationalized.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git am empty" test uses the construct
git am empty-file && false || :
which unconditionally returns true. Use test_must_fail instead, which
also has the benefit of noticing if "git am" has segfaulted.
While at it, tighten the test to check that the diagnostic appears on
stderr and not stdout.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.8.5~2 (am: don't infloop for an empty input file, 2012-02-25)
added a check for the human-readable message "Patch format detection
failed." but we forgot to suppress that check when running tests with
git configured to write output in another language.
Noticed by running tests with GETTEXT_POISON=YesPlease.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When v1.7.9.2~28^2 (2012-02-02) marked "Your branch is behind" and
friends for translation, it forgot to adjust tests not to check those
messages when tests are being run with git configured to write its
output in another language.
With this patch applied, t2020 and t6040 pass again with
GETTEXT_POISON=YesPlease.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pack everything into one big pack with "git repack
-Ad", any unreferenced objects in to-be-deleted packs are
exploded into loose objects, with the intent that they will
be examined and possibly cleaned up by the next run of "git
prune".
Since the exploded objects will receive the mtime of the
pack from which they come, if the source pack is old, those
loose objects will end up pruned immediately. In that case,
it is much more efficient to skip the exploding step
entirely for these objects.
This patch teaches pack-objects to receive the expiration
information and avoid writing these objects out. It also
teaches "git gc" to pass the value of gc.pruneexpire to
repack (which in turn learns to pass it along to
pack-objects) so that this optimization happens
automatically during "git gc" and "git gc --auto".
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing label import code looks at each commit being
imported, and then checks for labels at that commit. This
doesn't work in the real world though because it will drop
labels applied on changelists that have already been imported,
a common pattern.
This change adds a new --import-labels option. With this option,
at the end of the sync, git p4 gets sets of labels in p4 and git,
and then creates a git tag for each missing p4 label.
This means that tags created on older changelists are
still imported.
Tags that could not be imported are added to an ignore
list.
The same sets of git and p4 tags and labels can also be used to
derive a list of git tags to export to p4. This is enabled with
--export-labels in 'git p4 submit'.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If P4EDITOR is defined, the tests will fail when "git p4" starts an
editor.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefer:
test_line_count <OP> COUNT FILE
over:
test $(wc -l <FILE) <OP> COUNT
(or similar usages) in several tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is main test case for the original problem that triggered this
patch series. We create a repo with 50k tags and then test whether
git-clone over the smart HTTP protocol succeeds.
Note that we construct the repo in a slightly different way than the
original script used to reproduce the problem. This is because the
original script just created 50k tags all pointing to the same commit,
so if there was a bug where remote-curl.c was not passing all the refs
to fetch-pack we wouldn't know. The clone would succeed even if only one
tag was passed, because all the other tags were pointing at the same SHA
and would be considered present.
Instead we create a repo with 50k independent (dangling) commits and
then tag each of those commits with a unique tag. This way if one of the
tags is not given to fetch-pack, later stages of the clone would
complain about it.
This allows us to test both that the command line overflow was fixed, as
well as that it was fixed in a way that doesn't leave out any of the
refs.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These test cases focus only on testing the parsing of refs on stdin,
without bothering with the rest of the fetch-pack machinery. We pass in
the refs using different combinations of command line and stdin and then
we watch fetch-pack's stdout to see whether it prints all the refs we
specified (but we ignore their order).
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax for the use of mark references in fast-import
demands either a SP (space) or LF (end-of-line) after
a mark reference. Fast-import does not complain when garbage
appears after a mark reference in some cases.
Factor out parsing of mark references and complain if
errant characters are found. Also be a little more careful
when parsing "inline" and SHA1s, complaining if extra
characters appear or if the form of the dataref is unrecognized.
Buggy input can cause fast-import to produce the wrong output,
silently, without error. This makes it difficult to track
down buggy generators of fast-import streams. An example is
seen in the last line of this commit command:
commit refs/heads/S2
committer Name <name@example.com> 1112912893 -0400
data <<COMMIT
commit message
COMMIT
from :1M 100644 :103 hello.c
It is missing a newline and should be:
[...]
from :1
M 100644 :103 hello.c
What fast-import does is to produce a commit with the same
contents for hello.c as in refs/heads/S2^. What the buggy
program was expecting was the contents of blob :103. While
the resulting commit graph looked correct, the contents in
some commits were wrong.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print out a trailing newline when --show-prefix is run with cwd
at the top level of the tree which results in an empty prefix.
Behavior is now like --show-cdup.
Fixes an expected failure in t1501.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP authentication is currently handled by get_refs and fetch_ref, but
not by fetch_object, fetch_pack or fetch_alternates. In the
single-threaded case, this is not an issue, since get_refs is always
called first. It recognigzes the 401 and prompts the user for
credentials, which will then be used subsequently.
If the curl multi interface is used, however, only the multi handle used
by get_refs will have credentials configured. Requests made by other
handles fail with an authentication error.
Fix this by setting CURLOPT_USERPWD whenever a slot is requested.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a repo with multiple loose objects in order to demonstrate http
authentication breakage.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rebase--interactive stops due to a conflict and the only change
to be committed is in a submodule, the test for whether there is
anything to be committed ignores the staged submodule change. This
leads rebase to skip creating the commit for the change.
While unstaged submodule changes should be ignored to avoid needing to
update submodules during a rebase, it is safe to remove the
--ignore-submodules option to diff-index because --cached ensures that
it is only checking the index. This was discussed in [1] and a test is
included to ensure that unstaged changes are still ignored correctly.
[1] http://thread.gmane.org/gmane.comp.version-control.git/188713
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the $GITP4 variable that was used to specify the script in
contrib/fast-import/. The command is called "git p4" now, not
"git-p4".
Note that configuration variables will remain in a section called
"git-p4".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/cache-tree:
t0090: be prepared that 'wc -l' writes leading blanks
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
* cb/maint-t5541-make-server-port-portable:
t5541: check error message against the real port number used
remote-curl: Fix push status report when all branches fail
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
When execvp reports EACCES, it can be one of two things:
1. We found a file to execute, but did not have
permissions to do so.
2. We did not have permissions to look in some directory
in the $PATH.
In the former case, we want to consider this a
permissions problem and report it to the user as such (since
getting this for something like "git foo" is likely a
configuration error).
In the latter case, there is a good chance that the
inaccessible directory does not contain anything of
interest. Reporting "permission denied" is confusing to the
user (and prevents our usual "did you mean...?" lookup). It
also prevents git from trying alias lookup, since we do so
only when an external command does not exist (not when it
exists but has an error).
This patch detects EACCES from execvp, checks whether we are
in case (2), and if so converts errno to ENOENT. This
behavior matches that of "bash" (but not of simpler shells
that use execvp more directly, like "dash").
Test stolen from Junio.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "add -p" sees an unmerged entry, it shows the combined
diff and then immediately skips the hunk. This can be
confusing in a variety of ways, depending on whether there
are other changes to stage (in which case you get the
superfluous combined diff output in between other hunks) or
not (in which case you get the combined diff and the program
exits immediately, rather than seeing "No changes").
The current behavior was not planned, and is just what the
implementation happens to do. Instead, let's explicitly
remove unmerged entries from our list of modified files, and
print a warning that we are ignoring them.
We can cheaply find which entries are unmerged by adding
"--raw" output to the "diff-files --numstat" we already run.
There is one non-obvious thing we must change when parsing
this combined output. Before this patch, when we saw a
numstat line for a file that did not have index changes, we
would create a new record with 'unchanged' in the 'INDEX'
field. Because "--raw" comes before "--numstat", we must
move this special-case down to the raw-line case (and it is
sufficient to move it rather than handle it in both places,
since any file which has a --numstat will also have a --raw
entry).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user exited editor without editing the commit log template given
by "git commit -t <template>", the commit was aborted (correct) with an
error message that said "due to empty commit message" (incorrect).
This was because the original template support was done by piggybacking on
the check to detect an empty log message. Split the codepaths into two
independent checks to clarify the error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "-t template" and "-F msg" options are both given (or worse yet,
there is "commit.template" configuration but a message is given in some
other way), the documentation says that template is ignored. However,
the "has the user edited the message?" check still used the contents of
the template file as the basis of the emptyness check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests try to run "git commit" with various "forbidden" combinations
of options and expect the command to fail, but they do so without having
any change added to the index. We wouldn't be able to catch breakages
that would allow these combinations by mistake with them because the
command will fail with "nothing to commit" anyway.
Make sure we have something added to the index before running the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http-backend program sets default GIT_COMMITTER_NAME and
GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and
REMOTE_ADDR variables provided by the webserver. However, it
unconditionally overwrites any existing GIT_COMMITTER
variables, which may have been customized by site-specific
code in the webserver (or in a script wrapping http-backend).
Let's leave those variables intact if they already exist,
assuming that any such configuration was intentional. There
is a slight chance of a regression if somebody has set
GIT_COMMITTER_* for the entire webserver, not intending it
to leak through http-backend. We could protect against this
by passing the information in alternate variables. However,
it seems unlikely that anyone will care about that
regression, and there is value in the simplicity of using
the common variable names that are used elsewhere in git.
While we're tweaking the environment-handling in
http-backend, let's switch it to use argv_array to handle
the list of variables. That makes the memory management much
simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because snapshots can be large, you can save some bandwidth by
supporting caching via If-Modified-Since. This patch adds support for
the i-m-s request to git_snapshot() if the request is a commit.
Requests for snapshots of trees, which lack well defined timestamps,
are still handled as they were before.
Signed-off-by: W Trevor King <wking@drexel.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current gitweb only generates Last-Modified and handles
If-Modified-Since headers for the git_feed action. This patch breaks
the Last-Modified and If-Modified-Since handling code out from
git_feed into a new function exit_if_unmodified_since. This makes the
code easy to reuse for other actions.
Only gitweb actions which can easily calculate a modification time
should use exit_if_unmodified_since, as the goal is to balance local
processing time vs. upload bandwidth.
Signed-off-by: W Trevor King <wking@drexel.edu>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using this option git will search for all submodules that
have changed in the revisions to be send. It will then try to
push the currently checked out branch of each submodule.
This helps when a user has finished working on a change which
involves submodules and just wants to push everything in one go.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$COLUMNS must be unset to not interfere with the tests. The tests
already ignore the terminal size because output is redirected to a
file, but COLUMNS overrides terminal size detection and changes the
test output away from the standard 80.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge-recursive detects renames so that if one side modifies
"foo" and the other side moves it to "bar", the modification
is applied to "bar". However, our rename detection is based
on content analysis, it can be wrong (i.e., two files were
not intended as a rename, but just happen to have the same
or similar content).
This is quite rare if the files actually contain content,
since two unrelated files are unlikely to have exactly the
same content. However, empty files present a problem, in
that there is nothing to analyze. An uninteresting
placeholder file with zero bytes may or may not be related
to a placeholder file with another name.
The result is that adding content to an empty file may cause
confusion if the other side of a merge removed it; your
content may end up in another random placeholder file that
was added.
Let's err on the side of caution and not consider empty
files as renames. This will cause a modify/delete conflict
on the merge, which will let the user sort it out
themselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches difftool to handle the '--no-gui' option. This option
negates the existing '--gui' option. The last setting given on the command
line wins.
This allows a user to configure "[alias] mdt = difftool --gui", but still
have the ability to override the setting without error:
$ git mdt --no-gui
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to make sure that the three-dash separator lines appear
after the graph ancestry lines, and also the graph ancestry lines
are not broken between the diffstat and the patch.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
