Transport with dumb http can be fooled into following foreign URLs
that the end user does not intend to, especially with the server
side redirects and http-alternates mechanism, which can lead to
security issues. Tighten the redirection and make it more obvious
to the end user when it happens.
* jk/http-walker-limit-redirect-2.9:
http: treat http-alternates like redirects
http: make redirects more obvious
remote-curl: rename shadowed options variable
http: always update the base URL for redirects
http: simplify update_url_from_redirect
We instruct curl to always follow HTTP redirects. This is
convenient, but it creates opportunities for malicious
servers to create confusing situations. For instance,
imagine Alice is a git user with access to a private
repository on Bob's server. Mallory runs her own server and
wants to access objects from Bob's repository.
Mallory may try a few tricks that involve asking Alice to
clone from her, build on top, and then push the result:
1. Mallory may simply redirect all fetch requests to Bob's
server. Git will transparently follow those redirects
and fetch Bob's history, which Alice may believe she
got from Mallory. The subsequent push seems like it is
just feeding Mallory back her own objects, but is
actually leaking Bob's objects. There is nothing in
git's output to indicate that Bob's repository was
involved at all.
The downside (for Mallory) of this attack is that Alice
will have received Bob's entire repository, and is
likely to notice that when building on top of it.
2. If Mallory happens to know the sha1 of some object X in
Bob's repository, she can instead build her own history
that references that object. She then runs a dumb http
server, and Alice's client will fetch each object
individually. When it asks for X, Mallory redirects her
to Bob's server. The end result is that Alice obtains
objects from Bob, but they may be buried deep in
history. Alice is less likely to notice.
Both of these attacks are fairly hard to pull off. There's a
social component in getting Mallory to convince Alice to
work with her. Alice may be prompted for credentials in
accessing Bob's repository (but not always, if she is using
a credential helper that caches). Attack (1) requires a
certain amount of obliviousness on Alice's part while making
a new commit. Attack (2) requires that Mallory knows a sha1
in Bob's repository, that Bob's server supports dumb http,
and that the object in question is loose on Bob's server.
But we can probably make things a bit more obvious without
any loss of functionality. This patch does two things to
that end.
First, when we encounter a whole-repo redirect during the
initial ref discovery, we now inform the user on stderr,
making attack (1) much more obvious.
Second, the decision to follow redirects is now
configurable. The truly paranoid can set the new
http.followRedirects to false to avoid any redirection
entirely. But for a more practical default, we will disallow
redirects only after the initial ref discovery. This is
enough to thwart attacks similar to (2), while still
allowing the common use of redirects at the repository
level. Since c93c92f30 (http: update base URLs when we see
redirects, 2013-09-28) we re-root all further requests from
the redirect destination, which should generally mean that
no further redirection is necessary.
As an escape hatch, in case there really is a server that
needs to redirect individual requests, the user can set
http.followRedirects to "true" (and this can be done on a
per-server basis via http.*.followRedirects config).
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discover_refs() function has a local "options" variable
to hold the http_get_options we pass to http_get_strbuf().
But this shadows the global "struct options" that holds our
program-level options, which cannot be accessed from this
function.
Let's give the local one a more descriptive name so we can
tell the two apart.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
This should be part of every program, as otherwise users do
not get translated error messages. However, some external
commands forgot to do so (e.g., git-credential-store). This
fixes them, and eliminates the repeated code in programs
that did remember to use it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every program which links against libgit.a must call this
function, or risk hitting an assert() in system_path() that
checks whether we have configured argv0_path (though only
when RUNTIME_PREFIX is defined, so essentially only on
Windows).
Looking at the diff, you can see that putting it into the
common main() saves us having to do it individually in each
of the external commands. But what you can't see are the
cases where we _should_ have been doing so, but weren't
(e.g., git-credential-store, and all of the t/helper test
programs).
This has been an accident-waiting-to-happen for a long time,
but wasn't triggered until recently because it involves one
of those programs actually calling system_path(). That
happened with git-credential-store in v2.8.0 with ae5f677
(lazily load core.sharedrepository, 2016-03-11). The
program:
- takes a lock file, which...
- opens a tempfile, which...
- calls adjust_shared_perm to fix permissions, which...
- lazy-loads the config (as of ae5f677), which...
- calls system_path() to find the location of
/etc/gitconfig
On systems with RUNTIME_PREFIX, this means credential-store
reliably hits that assert() and cannot be used.
We never noticed in the test suite, because we set
GIT_CONFIG_NOSYSTEM there, which skips the system_path()
lookup entirely. But if we were to tweak git_config() to
find /etc/gitconfig even when we aren't going to open it,
then the test suite shows multiple failures (for
credential-store, and for some other test helpers). I didn't
include that tweak here because it's way too specific to
this particular call to be worth carrying around what is
essentially dead code.
The implementation is fairly straightforward, with one
exception: there is exactly one caller (git.c) that actually
cares about the result of the function, and not the
side-effect of setting up argv0_path. We can accommodate
that by simply replacing the value of argv[0] in the array
we hand down to cmd_main().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are certain startup tasks that we expect every git
process to do. In some cases this is just to improve the
quality of the program (e.g., setting up gettext()). In
others it is a requirement for using certain functions in
libgit.a (e.g., system_path() expects that you have called
git_extract_argv0_path()).
Most commands are builtins and are covered by the git.c
version of main(). However, there are still a few external
commands that use their own main(). Each of these has to
remember to include the correct startup sequence, and we are
not always consistent.
Rather than just fix the inconsistencies, let's make this
harder to get wrong by providing a common main() that can
run this standard startup.
We basically have two options to do this:
- the compat/mingw.h file already does something like this by
adding a #define that replaces the definition of main with a
wrapper that calls mingw_startup().
The upside is that the code in each program doesn't need
to be changed at all; it's rewritten on the fly by the
preprocessor.
The downside is that it may make debugging of the startup
sequence a bit more confusing, as the preprocessor is
quietly inserting new code.
- the builtin functions are all of the form cmd_foo(),
and git.c's main() calls them.
This is much more explicit, which may make things more
obvious to somebody reading the code. It's also more
flexible (because of course we have to figure out _which_
cmd_foo() to call).
The downside is that each of the builtins must define
cmd_foo(), instead of just main().
This patch chooses the latter option, preferring the more
explicit approach, even though it is more invasive. We
introduce a new file common-main.c, with the "real" main. It
expects to call cmd_main() from whatever other objects it is
linked against.
We link common-main.o against anything that links against
libgit.a, since we know that such programs will need to do
this setup. Note that common-main.o can't actually go inside
libgit.a, as the linker would not pick up its main()
function automatically (it has no callers).
The rest of the patch is just adjusting all of the various
external programs (mostly in t/helper) to use cmd_main().
I've provided a global declaration for cmd_main(), which
means that all of the programs also need to match its
signature. In particular, many functions need to switch to
"const char **" instead of "char **" for argv. This effect
ripples out to a few other variables and functions, as well.
This makes the patch even more invasive, but the end result
is much better. We should be treating argv strings as const
anyway, and now all programs conform to the same signature
(which also matches the way builtins are defined).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-fetch, --depth argument is always relative with the latest
remote refs. This makes it a bit difficult to cover this use case,
where the user wants to make the shallow history, say 3 levels
deeper. It would work if remote refs have not moved yet, but nobody
can guarantee that, especially when that use case is performed a
couple months after the last clone or "git fetch --depth". Also,
modifying shallow boundary using --depth does not work well with
clones created by --since or --not.
This patch fixes that. A new argument --deepen=<N> will add <N> more (*)
parent commits to the current history regardless of where remote refs
are.
Have/Want negotiation is still respected. So if remote refs move, the
server will send two chunks: one between "have" and "want" and another
to extend shallow history. In theory, the client could send no "want"s
in order to get the second chunk only. But the protocol does not allow
that. Either you send no want lines, which means ls-remote; or you
have to send at least one want line that carries deep-relative to the
server..
The main work was done by Dongcan Jiang. I fixed it up here and there.
And of course all the bugs belong to me.
(*) We could even support --deepen=<N> where <N> is negative. In that
case we can cut some history from the shallow clone. This operation
(and --depth=<shorter depth>) does not require interaction with remote
side (and more complicated to implement as a result).
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We introduce a way to send custom HTTP headers with all requests.
This allows us, for example, to send an extra token from build agents
for temporary access to private repositories. (This is the use case that
triggered this patch.)
This feature can be used like this:
git -c http.extraheader='Secret: sssh!' fetch $URL $REF
Note that `curl_easy_setopt(..., CURLOPT_HTTPHEADER, ...)` takes only
a single list, overriding any previous call. This means we have to
collect _all_ of the headers we want to use into a single list, and
feed it to cURL in one shot. Since we already unconditionally set a
"pragma" header when initializing the curl handles, we can add our new
headers to that list.
For callers which override the default header list (like probe_rpc),
we provide `http_copy_default_headers()` so they can do the same
trick.
Big thanks to Jeff King and Junio Hamano for their outstanding help and
patient reviews.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
"git fetch" and friends that make network connections can now be
told to only use ipv4 (or ipv6).
* ew/force-ipv4:
connect & http: support -4 and -6 switches for remote operations
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many manual argv allocations that predate the
argv_array API. Switching to that API brings a few
advantages:
1. We no longer have to manually compute the correct final
array size (so it's one less thing we can screw up).
2. In many cases we had to make a separate pass to count,
then allocate, then fill in the array. Now we can do it
in one pass, making the code shorter and easier to
follow.
3. argv_array handles memory ownership for us, making it
more obvious when things should be free()d and and when
not.
Most of these cases are pretty straightforward. In some, we
switch from "run_command_v" to "run_command" which lets us
directly use the argv_array embedded in "struct
child_process".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For curl error 35 (CURLE_SSL_CONNECT_ERROR) users need the
additional text stored in CURLOPT_ERRORBUFFER to debug why
the connection did not start. This is curl_errorstr inside
of http.c, so include that in the message if it is non-empty.
Sometimes HTTP response codes aren't yet available, such as
when the SSL setup fails. Don't include HTTP 0 in the message.
Signed-off-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is necessary to force IPv4-only or IPv6-only operation
on networks where name lookups may return a non-routable address and
stall remote operations.
The ssh(1) command has an equivalent switches which we may pass when
we run them. There may be old ssh(1) implementations out there
which do not support these switches; they should report the
appropriate error in that case.
rsync support is untouched for now since it is deprecated and
scheduled to be removed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the parse_fetch function to use struct object_id. Remove the
strlen check as get_oid_hex will fail safely on receiving a too-short
NUL-terminated string.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
This saves us some manual computation, and eliminates a call
to strcpy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new flag --sign=true (or --sign=false), which means the same
thing as the original --signed (or --no-signed). Give it a third
value --sign=if-asked to tell push and send-pack to send a push
certificate if and only if the server advertised a push cert nonce.
If not, warn the user that their push may not be as secure as they
thought.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clear the git_zstream variable at the start of git_deflate_init() etc.
so that callers don't have to do that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using environment variable LANGUAGE and friends on the client side,
HTTP-based transports now send Accept-Language when making requests.
* ye/http-accept-language:
http: add Accept-Language header if possible
There is no point in checking "!ref->name" when ref is a
"struct ref". The name field is a flex-array, and there
always has a non-zero address. This is almost certainly not
hurting anything, but it does cause clang-3.6 to complain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an Accept-Language header which indicates the user's preferred
languages defined by $LANGUAGE, $LC_ALL, $LC_MESSAGES and $LANG.
Examples:
LANGUAGE= -> ""
LANGUAGE=ko:en -> "Accept-Language: ko, en;q=0.9, *;q=0.1"
LANGUAGE=ko LANG=en_US.UTF-8 -> "Accept-Language: ko, *;q=0.1"
LANGUAGE= LANG=en_US.UTF-8 -> "Accept-Language: en-US, *;q=0.1"
This gives git servers a chance to display remote error messages in
the user's preferred language.
Limit the number of languages to 1,000 because q-value must not be
smaller than 0.001, and limit the length of Accept-Language header to
4,000 bytes for some HTTP servers which cannot accept such long header.
Signed-off-by: Yi EungJun <eungjun.yi@navercorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git push" request to be signed, so that it can be verified and
audited, using the GPG signature of the person who pushed, that the
tips of branches at a public repository really point the commits
the pusher wanted to, without having to "trust" the server.
* jc/push-cert: (24 commits)
receive-pack::hmac_sha1(): copy the entire SHA-1 hash out
signed push: allow stale nonce in stateless mode
signed push: teach smart-HTTP to pass "git push --signed" around
signed push: fortify against replay attacks
signed push: add "pushee" header to push certificate
signed push: remove duplicated protocol info
send-pack: send feature request on push-cert packet
receive-pack: GPG-validate push certificates
push: the beginning of "git push --signed"
pack-protocol doc: typofix for PKT-LINE
gpg-interface: move parse_signature() to where it should be
gpg-interface: move parse_gpg_output() to where it should be
send-pack: clarify that cmds_sent is a boolean
send-pack: refactor inspecting and resetting status and sending commands
send-pack: rename "new_refs" to "need_pack_data"
receive-pack: factor out capability string generation
send-pack: factor out capability string generation
send-pack: always send capabilities
send-pack: refactor decision to send update per ref
send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher
...
The number of refs that can be pushed at once over smart HTTP was
limited by the command line length. The limitation has been lifted
by passing these refs from the standard input of send-pack.
* jk/send-pack-many-refspecs:
send-pack: take refspecs over stdin
The "--signed" option received by "git push" is first passed to the
transport layer, which the native transport directly uses to notice
that a push certificate needs to be sent. When the transport-helper
is involved, however, the option needs to be told to the helper with
set_helper_option(), and the helper needs to take necessary action.
For the smart-HTTP helper, the "necessary action" involves spawning
the "git send-pack" subprocess with the "--signed" option.
Once the above all gets wired in, the smart-HTTP transport now can
use the push certificate mechanism to authenticate its pushes.
Add a test that is modeled after tests for the native transport in
t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test
Apache configuration to pass GNUPGHOME environment variable through.
As PassEnv would trigger warnings for an environment variable that
is not set, export it from test-lib.sh set to a harmless value when
GnuPG is not being used in the tests.
Note that the added test is deliberately loose and does not check
the nonce in this step. This is because the stateless RPC mode is
inevitably flaky and a nonce that comes back in the actual push
processing is one issued by a different process; if the two
interactions with the server crossed a second boundary, the nonces
will not match and such a check will fail. A later patch in the
series will work around this shortcoming.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a large number of refs works over most transports,
because we implement send-pack as an internal function.
However, it can sometimes fail when pushing over http,
because we have to spawn "git send-pack --stateless-rpc" to
do the heavy lifting, and we pass each refspec on the
command line. This can cause us to overflow the OS limits on
the size of the command line for a large push.
We can solve this by giving send-pack a --stdin option and
using it from remote-curl. We already dealt with this on
the fetch-pack side in 078b895 (fetch-pack: new --stdin
option to read refs from stdin, 2012-04-02). The stdin
option (and in particular, its use of packet-lines for
stateless-rpc input) is modeled after that solution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/remote-curl-squelch-extra-errors:
remote-curl: mark helper-protocol errors more clearly
remote-curl: use error instead of fprintf(stderr)
remote-curl: do not complain on EOF from parent git
When we encounter an error in remote-curl, we generally just
report it to stderr. There is no need for the user to care
that the "could not connect to server" error was generated
by git-remote-https rather than a function in the parent
git-fetch process.
However, when the error is in the protocol between git and
the helper, it makes sense to clearly identify which side is
complaining. These cases shouldn't ever happen, but when
they do, we can make them less confusing by being more
verbose.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We usually prefix our error messages with "error: ", but
many error messages from remote-curl are simply printed with
fprintf. This can make the output a little harder to read
(especially because such message may be intermingled with
errors from the parent git process).
There is no reason to avoid error(), as we are already
calling it many places (in addition to libgit.a functions
which use it).
While we're adjusting the messages, we can also drop the
capitalization which makes them unlike other git error
messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parent git process is supposed to send us an empty line
to indicate that the conversation is over. However, the
parent process may die() if there is a problem with the
operation (e.g., we try to fetch a ref that does not exist).
In this case, it produces a useful message, but then
remote-curl _also_ produces an unhelpful message:
$ git pull origin matser
fatal: couldn't find remote ref matser
Unexpected end of command stream
The "right" way to fix this is to teach the parent git to
always cleanly close the connection to the helper, letting
it know that we are done. Implementing that is rather
clunky, though, as it would involve either replacing die()
operations with returning errors up the stack (until we
disconnect the transport), or adding an atexit handler to
clean up any transport helpers left open.
It's much simpler to just suppress the EOF message in
remote-curl. It was not added to address any real-world
situation in the first place, but rather a "we should
probably report unexpected things" suggestion[1].
It is the parent git which drives the operation, and whose
exit value actually matters. If the parent dies, then the
helper has no need to complain (except as a debugging aid).
In the off chance that the pipe is closed without the parent
dying, it can still notice the non-zero exit code.
[1] http://article.gmane.org/gmane.comp.version-control.git/176036
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to match a prefix and then skip past it
with strlen, like:
if (starts_with(foo, "bar"))
foo += strlen("bar");
This avoids magic numbers, but means we have to repeat the
string (and there is no compiler check that we didn't make a
typo in one of the strings).
We can use skip_prefix to handle this case without repeating
ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently recognize an error message with a content-type
"text/plain; charset=utf-16" as text, but we ignore the
charset parameter entirely. Let's encode it to
log_output_encoding, which is presumably something the
user's terminal can handle.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get a content-type from curl, we get the whole
header line, including any parameters, and without any
normalization (like downcasing or whitespace) applied.
If we later try to match it with strcmp() or even
strcasecmp(), we may get false negatives.
This could cause two visible behaviors:
1. We might fail to recognize a smart-http server by its
content-type.
2. We might fail to relay text/plain error messages to
users (especially if they contain a charset parameter).
This patch teaches the http code to extract and normalize
just the type/subtype portion of the string. This is
technically passing out less information to the callers, who
can no longer see the parameters. But none of the current
callers cares, and a future patch will add back an
easier-to-use method for accessing those parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently don't reuse http connections when fetching via
the smart-http protocol. This is bad because the TCP
handshake introduces latency, and especially because SSL
connection setup may be non-trivial.
We can fix it by consistently using curl's "multi"
interface. The reason is rather complicated:
Our http code has two ways of being used: queuing many
"slots" to be fetched in parallel, or fetching a single
request in a blocking manner. The parallel code is built on
curl's "multi" interface. Most of the single-request code
uses http_request, which is built on top of the parallel
code (we just feed it one slot, and wait until it finishes).
However, one could also accomplish the single-request scheme
by avoiding curl's multi interface entirely and just using
curl_easy_perform. This is simpler, and is used by post_rpc
in the smart-http protocol.
It does work to use the same curl handle in both contexts,
as long as it is not at the same time. However, internally
curl may not share all of the cached resources between both
contexts. In particular, a connection formed using the
"multi" code will go into a reuse pool connected to the
"multi" object. Further requests using the "easy" interface
will not be able to reuse that connection.
The smart http protocol does ref discovery via http_request,
which uses the "multi" interface, and then follows up with
the "easy" interface for its rpc calls. As a result, we make
two HTTP connections rather than reusing a single one.
We could teach the ref discovery to use the "easy"
interface. But it is only once we have done this discovery
that we know whether the protocol will be smart or dumb. If
it is dumb, then our further requests, which want to fetch
objects in parallel, will not be able to reuse the same
connection.
Instead, this patch switches post_rpc to build on the
parallel interface, which means that we use it consistently
everywhere. It's a little more complicated to use, but since
we have the infrastructure already, it doesn't add any code;
we can just factor out the relevant bits from http_request.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
