diff_setup_done() has historically returned an error code, but lost
the last nonzero return in 943d5b7 (allow diff.renamelimit to be set
regardless of -M/-C, 2006-08-09). The callers were in a pretty
confused state: some actually checked for the return code, and some
did not.
Let it return void, and patch all callers to take this into account.
This conveniently also gets rid of a handful of different(!) error
messages that could never be triggered anyway.
Note that the function can still die().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the way "git diff --no-index" is bolted onto by touching the
low level code that is shared with the rest of the "git diff" code,
even though it has to work in a very different way, any comparison
that involves a file "-" at the root level incorrectly tried to read
from the standard input. This cleans up the no-index codepath
further to remove code that reads from the standard input from the
core side, which is never necessary when git is running its usual
diff operation.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
"git diff --no-index" did not correctly handle relative paths and
did not give correct exit codes when run under "--quiet" option.
* th/diff-no-index-fixes:
diff-no-index: exit(1) if 'diff --quiet <repo file> <external file>' finds changes
diff: handle relative paths in no-index
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regardless of where in the directory hierarchy you are, "-" on the
command line means the standard input. The old code knew too much
about how the low level machinery uses paths to read from the
working tree and did not bother to have the same check for "-" when
the command is run from the top-level.
Unify the codepaths for subdirectory case and toplevel case into one
and make it clearer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" takes exactly two paths, not pathspecs, and
has its own way queue_diff() to populate the diff_queue. Do not
call diff_tree_setup_paths(), pretending as it takes pathspecs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git diff --quiet <file1> <file2>', if file1 or file2
is outside the repository, it will exit(0) even if the files differ.
It should exit(1) when they differ.
This happens because 'diff_no_index' looks at the 'found_changes'
member from 'diff_options' to determine if changes were made. This
is the wrong thing to do, since it is only set if xdiff is actually
run and it finds a change (the diff machinery will optimize out the
xdiff call when it is not necessary) and in that case HAS_CHANGED
flag needs to be taken into account.
Use diff_result_code() that knows all these details for the correct
exit value instead.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diff-no-index is given a relative path to a file outside the
repository, it aborts with error. However, if the file is given
using an absolute path, the diff runs as expected. The two cases
should be treated the same.
Tests and commit message by Tim Henigan.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point in running a pager when --quiet is given,
since we are producing no output. The regular diff code path
handles this already, because --quiet implies --exit-code,
and we check for --exit-code when deciding not to run the
pager.
However, the "quiet implies exit-code" logic is done in
diff_setup_done, and the no-index code path sets up its
pager before running diff_setup_done, and misses this case.
We can fix this by reordering our initialization.
Currently we do:
1. read command line arguments into diff_options
2. Set pager if EXIT_CODE not requested
3. always set EXIT_CODE, since we are emulating
traditional diff
4. call diff_setup_done
We can fix the problem by moving pager initialization (step
2) after step 4. But step 3 must come after step 2 (since we
want to know whether the _user_ requested --exit-code, not
whether we turned it on unconditionally). So we must move
both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-diff does not rely on the git wrapper to setup its
pager; instead, it sets it up on its own after seeing
whether --quiet or --exit-code has been specified. After
diff_no_index was split off from cmd_diff, commit b3fde6c
(git diff --no-index: default to page like other diff
frontends, 2008-05-26) duplicated the one-liner from
cmd_diff to turn on the pager.
Later, commit 8f0359f (Allow pager of diff command be
enabled/disabled, 2008-07-21) taught the the version in
cmd_diff to respect the pager.diff config, but the version
in diff_no_index was left behind. This meant that
git -c pager.diff=0 diff a b
would not use a pager, but
git -c pager.diff=0 diff --no-index a b
would. Let's fix it by factoring out a common function.
While we're there, let's update the antiquated comment,
which claims that the pager interferes with propagating the
exit code; this has not been the case since ea27a18 (spawn
pager via run_command interface, 2008-07-22).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
queue_diff uses two strbufs, and at the end of the function
strbuf_reset was called. This only reset the length of the buffer -
any allocated memory was leaked. Using strbuf_release fixes this.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 875b91b (diff --no-index: use strbuf for temporary pathnames,
2012-04-25) introduced a regression when using diff --no-index with
directories. When iterating through a directory, the switch to strbuf
from heap-allocated char arrays caused paths to form like 'dir/file1',
'dir/file1file2', rather than 'dir/file1', 'dir/file2' as expected.
Avoid this by resetting the paths variables to their original length
before each iteration.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using limited-length buffers and risking of pathname
truncation, we should be taking advantage of strbuf API nowadays.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the use of strncpy without explicit NUL termination,
we could end up passing names n1 or n2 that are not NUL-terminated
to queue_diff, which requires NUL-terminated strings.
Ensure that each is NUL terminated.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_options.{paths,nr_paths} will be removed later. Do not
modify them directly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_insert to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are in a git directory, get_git_work_tree() can return NULL.
While trying to determine whether or not the given paths are outside
the work tree, the following command would read from it anyways and
trigger a segmentation fault.
git diff / /
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start the diff --no-index usage string with "usage:" instead of
"fatal:".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, 'git diff --no-index --stat a b' generated patch output in
addition to the --stat output (or whatever other output format was
requested). Now only the requested output is generated, and patch
output remains the default.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When launching "diff --no-index" with a parameter "/dev/null", the MSys
bash converts the "/dev/null" to a "nul", which usually makes sense. But
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
We display empty diffs for files whose timestamps have changed.
Usually, refreshing the index makes those empty diffs go away.
However, when not using the index they are not very useful and
there is no option to suppress them.
This forces on the skip_stat_unmatch option for diff --no-index,
suppressing any empty diffs. This option is also used for diffs
against the index when "diff.autorefreshindex" is set, but that
option does not apply to diff --no-index.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to find out mode changes, we should not access the symlink
targets using stat(); instead we use lstat() so that the diff does
not fail trying to find a non-existing symlink target.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to move to the next argument when parsing -q, getting stuck
in an endless loop.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to parse options before we can see if --exit-code was
provided.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accept -- as an "end of options" marker even when using --no-index.
Previously, the -- triggered a "normal" index/tree diff and subsequently
failed because of the unrecognized (in that mode) --no-index.
Note that the second loop can treat '--' as a normal option, because
the preceding checks ensure it is the third-to-last argument.
While at it, fix the parsing of "-q" option in --no-index mode as well.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With a new configuration "diff.mnemonicprefix", "git diff" shows the
differences between various combinations of preimage and postimage trees
with prefixes different from the standard "a/" and "b/". Hopefully this
will make the distinction stand out for some people.
"git diff" compares the (i)ndex and the (w)ork tree;
"git diff HEAD" compares a (c)ommit and the (w)ork tree;
"git diff --cached" compares a (c)ommit and the (i)ndex;
"git-diff HEAD:file1 file2" compares an (o)bject and a (w)ork tree entity;
"git diff --no-index a b" compares two non-git things (1) and (2).
Because these mnemonics now have meanings, they are swapped when reverse
diff is in effect and this feature is enabled.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name path_list was correct for the first usage of that data structure,
but it really is a general-purpose string list.
$ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list)
$ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list)
$ git mv path-list.h string-list.h
$ git mv path-list.c string-list.c
$ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path)
$ perl -i -pe 's/path/string/g' string-list.[ch]
$ git mv Documentation/technical/api-path-list.txt \
Documentation/technical/api-string-list.txt
$ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths)
... and then fix all users of string-list to access the member "string"
instead of "path".
Documentation/technical/api-string-list.txt needed some rewrapping, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when inside a git work tree, if two paths are given and at least one
is clearly outside the work tree, it cannot be a request to diff a tracked
path anyway; allow such an invocation to use --no-index semantics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if "foo" and/or "bar" does not exist in index, "git diff foo bar"
should not change behaviour drastically from "git diff foo bar baz" or
"git diff foo". A feature that "sometimes works and is handy" is an
unreliable cute hack.
"git diff foo bar" outside a git repository continues to work as a more
colourful alternative to "diff -u" as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
