By changing the dependency "$(LIB_H)" to "$(LIBS)", at least one version
of make thought that a file named "-lz" would be needed.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fk/blame:
blame: Rename detection (take 2)
rev-lib: Make it easy to do rename tracking (take 2)
Make it possible to not clobber object.util in sort_in_topological_order (take 2)
Add git-imap-send, derived from isync 1.0.1.
repack: prune loose objects when -d is given
try_to_simplify_commit(): do not skip inspecting tree change at boundary.
Fix t1200 test for breakage caused by removal of full-stop at the end of fast-forward message.
Describe how to add extra mail header lines in mail generated by git-format-patch.
Document the --attach flag.
allow double click on current HEAD id after git-pull
git-imap-send drops a patch series generated by git-format-patch into an
IMAP folder. This allows patch submitters to send patches through their
own mail program.
git-imap-send uses the following values from the GIT repository
configuration:
The target IMAP folder:
[imap]
Folder = "INBOX.Drafts"
A command to open an ssh tunnel to the imap mail server.
[imap]
Tunnel = "ssh -q user@imap.server.com /usr/bin/imapd ./Maildir
2> /dev/null"
[imap]
Host = imap.server.com
User = bob
Password = pwd
Port = 143
* jc/fsck:
fsck-objects: Remove --standalone
refs.c::do_for_each_ref(): Finish error message lines with "\n"
Nicer output from 'git'
Use #define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
Remove trailing dot after short description
Fix some inconsistencies in the docs
contrib/git-svn: fix a harmless warning on rebuild (with old repos)
contrib/git-svn: remove the --no-stop-on-copy flag
contrib/git-svn: fix svn compat and fetch args
Don't recurse into parents marked uninteresting.
diff-delta: bound hash list length to avoid O(m*n) behavior
test-delta needs zlib to compile
git-fmt-merge-msg cleanup
This brings http-push functionality more in line with the ssh/git version,
by borrowing bits from send-pack and rev-list to process refspecs and
revision history in more standard ways. Also, the status of remote objects
is determined using PROPFIND requests for the object directory rather than
HEAD requests for each object - while it may be less efficient for small
numbers of objects, this approach is able to get the status of all remote
loose objects in a maximum of 256 requests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The default output mode is slightly different from git-annotate's.
However, git-annotate's output mode can be obtained by using the
'-c' flag.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a companion patch to e29e1147e4
which made diffcore similarity estimator independent from the packfile
deltifier. There is no reason for us to be counting the xdelta anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/rev-list:
setup_revisions(): handle -n<n> and -<n> internally.
git-log (internal): more options.
git-log (internal): add approxidate.
Rip out merge-order and make "git log <paths>..." work again.
Tie it all together: "git log"
Introduce trivial new pager.c helper infrastructure
git-rev-list libification: rev-list walking
Splitting rev-list into revisions lib, end of beginning.
rev-list split: minimum fixup.
First cut at libifying revlist generation
Now blame will depend on the new revision walker infrastructure,
we need to make it depend on earlier parts of Linus' rev-list
topic branch, hence this merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Well, assuming breaking --merge-order is fine, here's a patch (on top of
the other ones) that makes
git log <filename>
actually work, as far as I can tell.
I didn't add the logic for --before/--after flags, but that should be
pretty trivial, and is independent of this anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to rework diffcore break/rename/copy detection code
so that it does not affected when deltifier code gets improved.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is what the previous diffs all built up to.
We can do "git log" as a trivial small helper function inside git.c,
because the infrastructure is all there for us to use as a library.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces the new function
void setup_pager(void);
to set up output to be written through a pager applocation.
All in preparation for doing the simple scripts in C.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When on Darwin platforms don't include Fink or DarwinPorts
into the link path unless the related library directory
is actually present. The linker on MacOS 10.4 complains
if it is given a directory which does not exist.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This really just splits things up partially, and creates the
interface to set things up by parsing the command line.
No real code changes so far, although the parsing of filenames is a bit
stricter. In particular, if there is a "--", then we do not accept any
filenames before it, and if there isn't any "--", then we check that _all_
paths listed are valid, not just the first one.
The new argument parsing automatically also gives us "--default" and
"--not" handling as in git-rev-parse.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The merge 712b1dd389 was done
incorrectly, and lost this program from Makefile.
Big thanks go to Tony Luck for noticing it, and Linus for
diagnosing it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a git-rm command which provides convenience similar to
git-add, (and a bit more since it takes care of the rm as well if
given -f).
Like git-add, git-rm expands the given path names through
git-ls-files. This means it only acts on files listed in the
index. And it does act recursively on directories by default, (no -r
needed as in the case of rm itself). When it recurses, it does not
remove empty directories that are left behind.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-cvsserver is highly functional. However, not all methods are implemented,
and for those methods that are implemented, not all switches are implemented.
All the common read operations are implemented, and add/remove/commit are
supported.
Testing has been done using both the CLI CVS client, and the Eclipse CVS
plugin. Most functionality works fine with both of these clients.
Currently git-cvsserver only works over SSH connections, see the
Documentation for more details on how to configure your client. It
does not support pserver for anonymous access but it should not be
hard to implement. Anonymous access will need tighter input validation.
In our very informal tests, it seems to be significantly faster than a real
CVS server.
This utility depends on a version of git-cvsannotate that supports -S and on
DBD::SQLite.
Licensed under GPLv2. Copyright The Open University UK.
Authors: Martyn Smith <martyn@catalyst.net.nz>
Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In my attempt to port git to IRIX, I broke it. Sorry.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Solaris 9 and up do not need -liconv, so NEEDS_LIBICONV should be set
only for S8.
- Move the declaration of the uname variables to early in the Makefile
so they can be referenced by prefix and gitexecdir variables.
- gitexecdir defaults to being same as bindir, it might as well reference
that variable.
[jc: corrupt patch, sneakily tried to remove inclusion of GIT-VERSION-FILE
I do not know why I am applying this...]
Signed-off-by: Paul Jakma <paul@quagga.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I have also been working on a blame program. The algorithm is pretty
much the one described by Junio in his blame.perl. My variant doesn't
handle renames, but it shouldn't be too hard to add that. The output
is minimal, just the line number followed by the commit SHA1.
An interesting observation is that the output from my git-blame and
your git-annotate doesn't match on all files in the git
repository. One example where several lines differ is read-cache.c. I
haven't investigated it further to find out which one is correct.
The code should be considered as a work in progress. It certainly has
a couple of rough edges. The output looks fairly sane on the few files
I have tested it on, but it wouldn't be too surprising if it gets some
cases wrong.
[jc: adding it to pu for wider comments. I did minimum
whitespace fixups but it still needs an indent run and
-Wdeclaration-after-statement fixups.]
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reads data in the format a (non recursive) ls-tree outputs
and writes a tree object to the object database. The created
tree object name is output to the standard output.
For convenience, the input data does not need to be sorted; the
command sorts the input lines internally.
By request from Tommi Virtanen.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not even test for subprocess (trying to execute python).
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of GNU make do not understand $(call), and have problems to
interpret rules like this:
some_target: CFLAGS += -Dsome=defs
[jc: simplified substitution a bit. ]
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some setups (notably server setups) you do not need that dependency.
Gracefully handle the absence of python when NO_PYTHON is defined.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of diff do not correctly detect a missing new-line at the end
of the file under certain circumstances.
When defining NO_ACCURATE_DIFF, work around this bug.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Systems using some uClibc versions do not properly support
iconv stuff. This patch allows Git to be built on those
systems by passing NO_ICONV=YesPlease to make. The only
drawback is mailinfo won't do charset conversion in those
systems.
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Tue, 14 Feb 2006, Junio C Hamano wrote:
> Linus Torvalds <torvalds@osdl.org> writes:
>
> > If somebody is interested in making the "lots of filename changes" case go
> > fast, I'd be more than happy to walk them through what they'd need to
> > change. I'm just not horribly motivated to do it myself. Hint, hint.
>
> In case anybody is wondering, I share the same feeling. I
> cannot say I'd be "more than happy to" clean up potential
> breakages during the development of such changes, but if the
> change eventually would help certain use cases, I can be
> persuaded to help debugging such a mess ;-).
Actually, I got interested in seeing how hard this is, and wrote a simple
first cut at doing a tree-optimized merger.
Let me shout a bit first:
THIS IS WORKING CODE, BUT BE CAREFUL: IT'S A TECHNOLOGY DEMONSTRATION
RATHER THAN THE FINAL PRODUCT!
With that out of the way, let me descibe what this does (and then describe
the missing parts).
This is basically a three-way merge that works entirely on the "tree"
level, rather than on the index. A lot of the _concepts_ are the same,
though, and if you're familiar with the results of an index merge, some of
the output will make more sense.
You give it three trees: the base tree (tree 0), and the two branches to
be merged (tree 1 and tree 2 respectively). It will then walk these three
trees, and resolve them as it goes along.
The interesting part is:
- it can resolve whole sub-directories in one go, without actually even
looking recursively at them. A whole subdirectory will resolve the same
way as any individual files will (although that may need some
modification, see later).
- if it has a "content conflict", for subdirectories that means "try to
do a recursive tree merge", while for non-subdirectories it's just a
content conflict and we'll output the stage 1/2/3 information.
- a successful merge will output a single stage 0 ("merged") entry,
potentially for a whole subdirectory.
- it outputs all the resolve information on stdout, so something like the
recursive resolver can pretty easily parse it all.
Now, the caveats:
- we probably need to be more careful about subdirectory resolves. The
trivial case (both branches have the exact same subdirectory) is a
trivial resolve, but the other cases ("branch1 matches base, branch2 is
different" probably can't be silently just resolved to the "branch2"
subdirectory state, since it might involve renames into - or out of -
that subdirectory)
- we do not track the current index file at all, so this does not do the
"check that index matches branch1" logic that the three-way merge in
git-read-tree does. The theory is that we'd do a full three-way merge
(ignoring the index and working directory), and then to update the
working tree, we'd do a two-way "git-read-tree branch1->result"
- I didn't actually make it do all the trivial resolve cases that
git-read-tree does. It's a technology demonstration.
Finally (a more serious caveat):
- doing things through stdout may end up being so expensive that we'd
need to do something else. In particular, it's likely that I should
not actually output the "merge results", but instead output a "merge
results as they _differ_ from branch1"
However, I think this patch is already interesting enough that people who
are interested in merging trees might want to look at it. Please keep in
mind that tech _demo_ part, and in particular, keep in mind the final
"serious caveat" part.
In many ways, the really _interesting_ part of a merge is not the result,
but how it _changes_ the branch we're merging into. That's particularly
important as it should hopefully also mean that the output size for any
reasonable case is minimal (and tracks what we actually need to do to the
current state to create the final result).
The code very much is organized so that doing the result as a "diff
against branch1" should be quite easy/possible. I was actually going to do
it, but I decided that it probably makes the output harder to read. I
dunno.
Anyway, let's think about this kind of approach.. Note how the code itself
is actually quite small and short, although it's prbably pretty "dense".
As an interesting test-case, I'd suggest this merge in the kernel:
git-merge-tree $(git-merge-base 4cbf876 7d2babc) 4cbf876 7d2babc
which resolves beautifully (there are no actual file-level conflicts), and
you can look at the output of that command to start thinking about what
it does.
The interesting part (perhaps) is that timing that command for me shows
that it takes all of 0.004 seconds.. (the git-merge-base thing takes
considerably more ;)
The point is, we _can_ do the actual merge part really really quickly.
Linus
PS. Final note: when I say that it is "WORKING CODE", that is obviously by
my standards. IOW, I tested it once and it gave reasonable results - so it
must be perfect.
Whether it works for anybody else, or indeed for any other test-case, is
not my problem ;)
Signed-off-by: Junio C Hamano <junkio@cox.net>
If Git is compiled with NO_CURL=YesPlease and one tries to
clone a http repository, git-clone tries to call the curl
binary. This trivial patch prints an error instead in such
situation.
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the current Makefile we don't use the shell chosen by the
platform specific defines when we invoke GIT-VERSION-GEN.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This revamps the git-status command to take the same set of
parameters as git commit. It gives a preview of what is being
committed with that command. With -v flag, it shows the diff
output between the HEAD commit and the index that would be
committed if these flags were given to git-commit command.
git-commit also acquires -v flag (it used to mean "verify" but
that is the default anyway and there is --no-verify to turn it
off, so not much is lost), which uses the updated git-status -v
to seed the commit log buffer. This is handy for writing a log
message while reviewing the changes one last time.
Now, git-commit and git-status are internally share the same
implementation.
Unlike previous git-commit change, this uses a temporary index
to prepare the index file that would become the real index file
after a successful commit, and moves it to the real index file
once the commit is actually made. This makes it safer than the
previous scheme, which stashed away the original index file and
restored it after an aborted commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a workflow that employs relatively long lived topic branches,
the developer sometimes needs to resolve the same conflict over
and over again until the topic branches are done (either merged
to the "release" branch, or sent out and accepted upstream).
This commit introduces a new command, "git rerere", to help this
process by recording the conflicted automerge results and
corresponding hand-resolve results on the initial manual merge,
and later by noticing the same conflicted automerge and applying
the previously recorded hand resolution using three-way merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is essentially 'git whatchanged -n1 --always --cc "$@"'.
Just like whatchanged takes default flags from
whatchanged.difftree configuration, this uses show.difftree
configuration.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new option '-c' to diff-tree changes the way a merge commit is
displayed when generating a patch output. It shows a "combined
diff" (hence the option letter 'c'), which looks like this:
$ git-diff-tree --pretty -c -p fec9ebf1 | head -n 18
diff-tree fec9ebf... (from parents)
Merge: 0620db3... 8a263ae...
Author: Junio C Hamano <junkio@cox.net>
Date: Sun Jan 15 22:25:35 2006 -0800
Merge fixes up to GIT 1.1.3
diff --combined describe.c
@@@ +98,7 @@@
return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1;
}
- static void describe(char *arg)
- static void describe(struct commit *cmit, int last_one)
++ static void describe(char *arg, int last_one)
{
+ unsigned char sha1[20];
+ struct commit *cmit;
There are a few things to note about this feature:
- The '-c' option implies '-p'. It also implies '-m' halfway
in the sense that "interesting" merges are shown, but not all
merges.
- When a blob matches one of the parents, we do not show a diff
for that path at all. For a merge commit, this option shows
paths with real file-level merge (aka "interesting things").
- As a concequence of the above, an "uninteresting" merge is
not shown at all. You can use '-m' in addition to '-c' to
show the commit log for such a merge, but there will be no
combined diff output.
- Unlike "gitk", the output is monochrome.
A '-' character in the nth column means the line is from the nth
parent and does not appear in the merge result (i.e. removed
from that parent's version).
A '+' character in the nth column means the line appears in the
merge result, and the nth parent does not have that line
(i.e. added by the merge itself or inherited from another
parent).
The above example output shows that the function signature was
changed from either parents (hence two "-" lines and a "++"
line), and "unsigned char sha1[20]", prefixed by a " +", was
inherited from the first parent.
The code as sent to the list was buggy in few corner cases,
which I have fixed since then.
It does not bother to keep track of and show the line numbers
from parent commits, which it probably should.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Needs iconv and third party lib/headers are inside /usr/local
Signed-off-by: Alecs King <alecsk@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alas, not all shells named sh are capable enough to run
GIT-VERSION-GEN.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The recent Cygwin defines DT_UNKNOWN although it does not have d_type
in struct dirent. Give an option to tell us not to use d_type on such
platforms. Hopefully this problem will be transient.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The d_ino field is only used for performance reasons in
fsck-objects. On a typical filesystem, i-number tends to have a
strong correlation with where the actual bits sit on the disk
platter, and we sort the entries to allow us scan things that
ought to be close together together.
If the platform lacks support for it, it is not a big deal.
Just do not use d_ino for sorting, and scan them unsorted.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Disable USE_SYMLINK_HEAD by default. Recommend using it only for
compatibility with older software.
Treat USE_SYMLINK_HEAD like other optional defines - check whether it's
defined, not its value.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier change to separate $(gitexecdir) from $(bindir) had
the installation location of the git wrapper and the rest of the
commands the wrong way (right now, both of them point at the
same location so there is no real harm).
Also gitk needs to be installed in $(bindir).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git suite may not be in PATH (and thus programs such as
git-send-pack could not exec git-rev-list). Thus there is a need for
logic that will locate these programs. Modifying PATH is not
desirable as it result in behavior differing from the user's
intentions, as we may end up prepending "/usr/bin" to PATH.
- git C programs will use exec*_git_cmd() APIs to exec sub-commands.
- exec*_git_cmd() will execute a git program by searching for it in
the following directories:
1. --exec-path (as used by "git")
2. The GIT_EXEC_PATH environment variable.
3. $(gitexecdir) as set in Makefile (default value $(bindir)).
- git wrapper will modify PATH as before to enable shell scripts to
invoke "git-foo" commands.
Ideally, shell scripts should use the git wrapper to become independent
of PATH, and then modifying PATH will not be necessary.
[jc: with minor updates after a brief review.]
Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is not invoked by any other target (most notably, "make
install" does not), but is provided as a convenience for people
who are building from the source.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When producing a release tarball, include a "version" file, which
GIT-VERSION-GEN can then use to do the right thing when building from a
tarball.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The official maintainer is keeping up-to-date quite well, and now
the older Debian is supported with backports.org, there is no reason
for me to keep debian/ directory around here.
I have not been building and publishing debs since 1.0.4 anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Note: with this commit, the GIT maintainer workflow must change.
GIT-VERSION-GEN is now the file to munge when the default
version needs to be changed, not Makefile. The tag needs to be
pushed into the repository to build the official tarball and
binary package beforehand.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It shows you the most recent tag that is reachable from a particular
commit is.
Maybe this is something that "git-name-rev" should be taught to do,
instead of having a separate command for it. Regardless, I find it useful.
What it does is to take any random commit, and "name" it by looking up the
most recent commit that is tagged and reachable from that commit. If the
match is exact, it will just print out that ref-name directly. Otherwise
it will print out the ref-name, followed by the 8-character "short SHA".
IOW, with something like Junios current tree, I get:
[torvalds@g5 git]$ git-describe parent
refs/tags/v1.0.4-g2414721b
ie the current head of my "parent" branch (ie Junio) is based on v1.0.4,
but since it has a few commits on top of that, it has added the git hash
of the thing to the end: "-g" + 8-char shorthand for the commit
2414721b19.
Doing a "git-describe" on a tag-name will just show the full tag path:
[torvalds@g5 git]$ git-describe v1.0.4
refs/tags/v1.0.4
unless there are _other_ tags pointing to that commit, in which case it
will just choose one at random.
This is useful for two things:
- automatic version naming in Makefiles, for example. We could use it in
git itself: when doing "git --version", we could use this to give a
much more useful description of exactly what version was installed.
- for any random commit (say, you use "gitk <pathname>" or
"git-whatchanged" to look at what has changed in some file), you can
figure out what the last version of the repo was. Ie, say I find a bug
in commit 39ca371c45b04cd50d0974030ae051906fc516b6, I just do:
[torvalds@g5 linux]$ git-describe 39ca371c45b04cd50d0974030ae051906fc516b6
refs/tags/v2.6.14-rc4-g39ca371c
and I now know that it was _not_ in v2.6.14-rc4, but was presumably in
v2.6.14-rc5.
The latter is useful when you want to see what "version timeframe" a
commit happened in.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Minor fixes.
Starting from this one I won't be touching debian/ directory
since the official maintainer seems to be reasonably quick to
package up things. The packaging procedure used there seems to
be quite different from what I have, so I'd like to avoid
potential confusion and reduce work by the official maintainer
and myself.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We want to record the version of the tools the patch was generated with.
While these tools could be rebuilt, git-format-patch stayed the same and
report the wrong version.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
HPA suggests it is simply silly to imitate Linux versioning
scheme where the leading "2" does not mean anything anymore, and
I tend to agree.
The first feature release after 1.0.0 will be 1.1.0, and the
development path leading to 1.1.0 will carry 1.0.GIT as the
version number from now on. Similarly, the third maintenance
release that follows 1.0.0 will not be 1.0.0c as planned, but
will be called 1.0.3. The "maint" branch will merge in fixes
and immediately tagged, so there is no need for 1.0.2.GIT that
is in between 1.0.2 (aka 1.0.0b) and 1.0.3.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Avoid misleading success message on error (Johannes)
- objects/info/packs: work around bug in http-fetch.c::fetch_indices()
- http-fetch.c: fix objects/info/pack parsing.
- An off-by-one bug found by valgrind (Pavel)
Signed-off-by: Junio C Hamano <junkio@cox.net>
We still advertise "git resolve" as a standalone command, but never
"git octopus", so nobody should be using it and it is safe to
retire it. The functionality is still available as a strategy
backend.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split out the functions that deal with the socketpair after
finishing git protocol handshake to receive the packed data into
a separate file, and use it in fetch-pack to keep/explode the
received pack data. We earlier had something like that on
clone-pack side once, but the list discussion resulted in the
decision that it makes sense to always keep the pack for
clone-pack, so unpacking option is not enabled on the clone-pack
side, but we later still could do so easily if we wanted to with
this change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Oh, I hate to do this but I ended up merging big usage string
cleanups from Fredrik, git-am enhancements that made a lot of
sense for non mbox users from HPA, and rebase changes (done
independently by me and Lukas) among other things, so git is
still in perpetual state of 1.0rc. 1.0 will probably be next
Wednesday, but who knows.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added an AIX clause in the Makefile; that clause likely
will be wrong for any AIX pre-5.2, but I can only test
on 5.3. mailinfo.c was missing the compat header file,
and convert-objects.c needs to define a specific
_XOPEN_SOURCE as well as _XOPEN_SOURCE_EXTENDED.
Signed-off-by: E. Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This attempts to clean up the way various compatibility
functions are defined and used.
- A new header file, git-compat-util.h, is introduced. This
looks at various NO_XXX and does necessary function name
replacements, equivalent of -Dstrcasestr=gitstrcasestr in the
Makefile.
- Those function name replacements are removed from the Makefile.
- Common features such as usage(), die(), xmalloc() are moved
from cache.h to git-compat-util.h; cache.h includes
git-compat-util.h itself.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is no setenv() in Solaris 5.8. The trivial calls to
setenv() were replaced by putenv() in a much earlier patch,
but setenv() was used again in git.c. This patch just adds
a compat/setenv.c.
The rule for building git$(X) also needs to include compat.
objects and compiler flags. Those are now in makefile vars
COMPAT_OBJS and COMPAT_CFLAGS.
Signed-off-by: E. Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alex Riesen wants to keep extra makefile targets in config.mak, but
the file is included before any of our real targets. Having this
at the beginning allows you to do so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes it possible to define WITH_SEND_EMAIL etc. in config.mak.
Also remove GIT_LIST_TWEAK because it isn't used anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we would end up linking all the unneeded stuff into git-daemon
only to link with git_default_config.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove $(SIMPLE_PROGRAMS) from $(PROGRAMS) so buildrules don't have
to be overridden.
Put $(SCRIPTS) with the other target-macros so it doesn't get lonely.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also rearrange some path settings in the Makefile in the process.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is meant for the end user, who cannot be expected to edit
.git/config by hand.
Example:
git-config-set core.filemode true
will set filemode in the section [core] to true,
git-config-set --unset core.filemode
will remove the entry (failing if it is not there), and
git-config-set --unset diff.twohead ^recar
will remove the unique entry whose value matches the regex "^recar"
(failing if there is no unique such entry).
It is just a light wrapper around git_config_set() and
git_config_set_multivar().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The decision about whether to build http-push or not belongs in the
Makefile. This follows Junio's suggestion to determine whether curl
is new enough to support http-push.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Move shared HTTP request functionality out of http-fetch and http-push,
and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with
one fwrite_buffer function that does dynamic buffering. Use slot
callbacks to process responses to fetch object transfer requests and
push transfer requests, and put all of http-push into an #ifdef check
for curl multi support.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When HPA added Cygwin target, it ran just fine without NO_MMAP for him,
but recently we are getting reports that for some people things break
without it. For now, just suggest it in the Makefile without actually
updating the default.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch provides a C implementation of the 'git' program and
introduces support for putting the git-* commands in a directory
of their own. It also saves some time on executing those commands
in a tight loop and it prints the currently available git commands
in a nicely formatted list.
The location of the GIT_EXEC_PATH (name discussion's closed, thank gods)
can be obtained by running
git --exec-path
which will hopefully give porcelainistas ample time to adapt their
heavy-duty loops to call the core programs directly and thus save
the extra fork() / execve() overhead, although that's not really
necessary any more.
The --exec-path value is prepended to $PATH, so the git-* programs
should Just Work without ever requiring any changes to how they call
other programs in the suite.
Some timing values for 10000 invocations of git-var >&/dev/null:
git.sh: 24.194s
git.c: 9.044s
git-var: 7.377s
The git-<tab><tab> behaviour can, along with the someday-to-be-deprecated
git-<command> form of invocation, be indefinitely retained by adding
the following line to one's .bash_profile or equivalent:
PATH=$PATH:$(git --exec-path)
Experimental libraries can be used by either setting the environment variable
GIT_EXEC_PATH, or by using
git --exec-path=/some/experimental/exec-path
Relative paths are properly grok'ed as exec-path values.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A while ago, a rename-detection limit logic was implemented as a
response to this thread:
http://marc.theaimsgroup.com/?l=git&m=112413080630175
where gitweb was found to be using a lot of time and memory to
detect renames on huge commits. git-diff family takes -l<num>
flag, and if the number of paths that are rename destination
candidates (i.e. new paths with -M, or modified paths with -C)
are larger than that number, skips rename/copy detection even
when -M or -C is specified on the command line.
This commit makes the rename detection limit easier to use. You
can have:
[diff]
renamelimit = 30
in your .git/config file to specify the default rename detection
limit. You can override this from the command line; giving 0
means 'unlimited':
git diff -M -l0
We might want to change the default behaviour, when you do not
have the configuration, to limit it to say 20 paths or so. This
would also help the diffstat generation after a big 'git pull'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames the tarball "git" rather than "git-core", and changes
the names of various packages from git-core-foo to git-foo. git-core is
still the true core package; an empty RPM package named "git" pulls in
ALL the git packages -- this makes updates work correctly, and allows
"yum install git" to do the obvious thing.
It also renames the git-(core-)tk package to gitk.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Stuffing -L flag and friends meant for the linking phase into
ALL_CFLAGS is not right; honor LDFLAGS and introduce ALL_LDFLAGS
to separate them out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because we use "lost-found" as the directory name to hold
dangling object names, it is confusing to call the command
git-lost+found, although it makes sense and is even cute ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is GIT 1.0-rc1 in disguise. It is plausible that
relatively new parts of the system still need tweaking and
fixing, but that is why it is not 1.0 but rc ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames git-pack-intersect to git-pack-redundant
as suggested by Petr Baudis. The new name reflects what the
program does, rather than how it does it.
Also fix a small argument parsing bug.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds the program git-pack-intersect. It is
used to find redundant packs in git repositories.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Another snapshot, as slow and steady marth towards 1.0 continues.
Major changes include:
- Jim Radford's RPM split.
- Fredrik's recursive merge strategy is now default for two heads merge.
- Yaacov's SVN importer updates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A script that can replay commits git into a CVS checkout. Tries to ensure the
sanity of the operation and supports mainly manual usage.
If you are reckless enough, you can ask it to autocommit when everything has
applied cleanly. Combined with a couple more scripts could become part of
a git2cvs gateway.
Should support adds/removes and binary files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There's no standard libexpat for OSX, so if you install it
after-market, it can end up in various directories. Give
paths used by fink and darwinports by default to CFLAGS.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add support for pushing to a remote repository using HTTP/DAV
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As discussed on the list, split the foreign SCM interoperability
packages and documentation from the git-core binary package.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I think the original intention was to make CFLAGS overridable
from the make command line, but somehow we ended up accumulating
conditional makefile sections that wrongly appends values to
CFLAGs. These assignments do not work when the user actually
override them from the make command line!
DEFINES are handled the same way; it was seemingly overridable,
but the makefile sections had assignments, which meant
overriding it from the command line broke things.
This simplifies things by limiting the internal futzing to
ALL_CFLAGS, and by removing DEFINES altogether. Overriding
CFLAGS from the command line should start working with this
change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is primarily to include the 'git clone -l' (without -s) fix,
first spotted and diagnosed by Linus and caused James Bottomley's
repository to become unreadable. It also contains documentation
updates happened on the "master" branch since 0.99.9c
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the coolest merge strategy ever, "ours". It can take
arbitrary number of foreign heads and merge them into the
current branch, with the resulting tree always taken from our
branch head, hence its name.
What this means is that you can declare that the current branch
supersedes the development histories of other branches using
this merge strategy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't set a non-standard CURLDIR as default, and fix an error
in Solaris 10 by setting NEEDS_LIBICONV.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This contains the changes made on the master branch since 0.99.9a.
The workaround for building RPMs has not changed since 0.99.9a,
mainly because I haven't heard back if it was good enough for
kernel.org consumption, or otherwise what changes are needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a companion patch to 4f9dcf7e5c
which stops mentioning the old command names. As promised, we do not
install symlinks to let people use backward compatibility names anymore.
cmd-rename.sh script is still shipped to help people who installed
previous git by hand to clean up the leftover symlinks.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This script was superseded by git-name-rev, which is more versatile,
actually documented, faster, and everything else...
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Done in 0.99.9
==============
Ports
~~~~~
* Cygwin port [HPA].
* OpenBSD build [Merlyn and others].
Fixes
~~~~~
* clone request over git native protocol from a repository with
too many refs did not work; this has been fixed.
* git-daemon got safer for kernel.org use [HPA].
* Extended SHA1 parser was not enforcing uniqueness for
abbreviated SHA1; this has been fixed.
* http transport does not barf on funny characters in URL.
* The ref naming restrictions have been formalized and the
coreish refuses to create funny refs; we still need to audit
importers. See git-check-ref-format(1).
New Features and Commands
~~~~~~~~~~~~~~~~~~~~~~~~~
* .git/config file as a per-repository configuration mechanism,
and some commands understand it [Linus]. See
git(7).
* The core.filemode configuration item can be used to make us a
bit more FAT friendly. See git(7).
* The extended SHA1 notation acquired Peel-the-onion operator
^{type} and ^{}. See git-rev-parse(1).
* SVN importer [Matthias]. See git-svnimport(1).
* .git/objects/[0-9a-f]{2} directories are created on demand,
and removed when becomes empty after prune-packed [Linus].
* Filenames output from various commands without -z option are
quoted when they embed funny characters (TAB and LF) using
C-style quoting within double-quotes, to match the proposed
GNU diff/patch notation [me, but many people contributed in
the discussion].
* git-mv is expected to be a better replacement for git-rename.
While the latter has two parameter restriction, it acts more
like the regular 'mv' that can move multiple things to one
destinatino directory [Josef Weidendorfer].
* git-checkout can take filenames to revert the changes to
them. See git-checkout(1)
* The new program git-am is a replacement for git-applymbox that
has saner command line options and a bit easier to use when a
patch does not apply cleanly.
* git-ls-remote can show unwrapped onions using ^{} notation, to
help Cogito to track tags.
* git-merge-recursive backend can merge unrelated projects.
* git-clone over native transport leaves the result packed.
* git-http-fetch issues multiple requests in parallel when
underlying cURL library supports it [Nick and Daniel].
* git-fetch-pack and git-upload-pack try harder to figure out
better common commits [Johannes].
* git-read-tree -u removes a directory when it makes it empty.
* git-diff-* records abbreviated SHA1 names of original and
resulting blob; this sometimes helps to apply otherwise an
unapplicable patch by falling back to 3-way merge.
* git-format-patch now takes series of from..to rev ranges and
with '-m --stdout', writes them out to the standard output.
This can be piped to 'git-am' to implement cheaper
cherry-picking.
* git-tag takes '-u' to specify the tag signer identity [Linus].
* git-rev-list can take optional pathspecs to skip commits that
do not touch them (--dense) [Linus].
* Comes with new and improved gitk [Paulus and Linus].
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-name-rev tries to find nice symbolic names for commits. It does so by
walking the commits from the refs. When the symbolic name is ambiguous, the
following heuristic is applied: Try to avoid too many ~'s, and if two ambiguous
names have the same count of ~'s, take the one whose last number is smaller.
With "--tags", the names are derived only from tags.
With "--stdin", the stdin is parsed, and after every sha1 for which a name
could be found, the name is appended. (Try "git log | git name-rev --stdin".)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pack-objects can reuse pack files stored in $GIT_DIR/pack-cache
directory, when a necessary pack is found. This is hopefully useful
when upload-pack (called from git-daemon) is expected to receive
requests for the same set of objects many times (e.g full cloning
request of any project, or updates from the set of heads previous day
to the latest for a slow moving project).
Currently git-pack-objects does *not* keep pack files it creates for
reusing. It might be useful to add --update-cache option to it,
which would allow it store pack files it created in the pack-cache
directory, and prune rarely used ones from it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a very git specific restricted shell, that can be
added to /etc/shells and set to the pw_shell in the /etc/passwd
file, to give users ability to push into repositories over ssh
without giving them full interactive shell acount.
[jc: I updated Linus' patch to match what the current sq_quote()
does.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It supersedes git-rename by adding functionality to move multiple
files, directories or symlinks into another directory. It also
provides according documentation.
The implementation renames multiple files, using the arguments from
the command line to produce an array of sources and destinations. In
a first pass, all requested renames are checked for errors, and
overwriting of existing files is only allowed with '-f'. The actual
renaming is done in a second pass. This ensures that any error
condition is checked before anything is changed.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the tree diff functionality independent of the "git-diff-tree"
program, by splitting the core functionality up into a library file.
This will be needed for when we teach git-rev-list to only follow a
specified set of pathnames, rather than the global revision history.
Most of it is a fairly straightforward code move, but it also involves
some calling convention cleanup, and moving some of the static variables
from diff-tree.c into the options structure.
The actual tree change callback routines also become paramterized by the
diff_options structure, allowing the library functionality to do something
else than just show the diff on stdout.
Right now the only user of this functionality remains git-diff-tree
itself.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since git-cherry-pick is simply a copy of git-revert, it can be created
before installing (so that it can be used without installing, too).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Yes I said 0.99.8e was the last maintenance release for 0.99.8, but it
turns out that there was another backport necessary after git-daemon
was unleashed on kernel.org servers.
Contains the following since 0.99.8e:
H. Peter Anvin:
revised^2: git-daemon extra paranoia, and path DWIM
Johannes Schindelin:
Fix cvsimport warning when called without --no-cvs-direct
Junio C Hamano:
Do not ask for objects known to be complete.
Linus Torvalds:
git-fetch-pack: avoid unnecessary zero packing
Optimize common case of git-rev-list
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds:
make checkout-index '-a' flag saner.
Junio C Hamano:
whatchanged: document -m option from git-diff-tree.
Functions to quote and unquote pathnames in C-style.
Update git-apply to use C-style quoting for funny pathnames.
Do not quote SP.
git-checkout-index: documentation updates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Contains the following changes since v0.99.8c.
Johannes Schindelin:
Teach git-status about spaces in file names also on MacOSX
t5400-send-pack relies on a working cpio
Jonas Fonseca:
git.sh: quote all paths
Junio C Hamano:
Also force LC_ALL in test scripts.
OpenBSD needs the strcasestr replacement.
git-check-ref-format: reject funny ref names.
Refuse to create funny refs in clone-pack, git-fetch and receive-pack.
Ignore funny refname sent from remote
Introduce notation "ref^{type}".
Martin Langhoff:
cvsimport: don't pass --cvs-direct if user options contradict us
Ralf Baechle:
rsh.c: typo fix
Note that "funny ref" bits are not strictly fixes but rather
backport from the "master" branch. They will prevent refs and
heads with funny names from being created. In addition, what is
in the master branch will start feeding the clients unwrapped
tag information to help Martin's findtags and possibly later
Cogito. These backported "funny ref" changes are to prevent
clients on the "maint" branch from getting confused when talking
with newer git-upload-pack and when reading from info/refs file
prepared with newer git-update-server-info.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update check_ref_format() function to reject ref names that:
* has a path component that begins with a ".", or
* has a double dots "..", or
* has ASCII control character, "~", "^", ":" or SP, anywhere, or
* ends with a "/".
Use it in 'git-checkout -b', 'git-branch', and 'git-tag' to make sure
that newly created refs are well-formed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
