"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older Gits talked about "updating" a file to add its content to the
index, but this terminology is confusing for new users. "to stage" is far
more intuitive and already used in e.g. the "git stage" command name.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
An earlier commit c5ee71f (commit: more compact summary and without extra
quotes, 2009-01-19) changed the "git commit" output when creating a
commit. This patch updates the example session in the tutorial to match
the new output.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Talking about "git help" is useful because it has a few more
features (like when using it without arguments or with "-a") and
it may work on non unix like platforms.
Also add a few links to git-help(1) in "See also" sections.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c85db254 changed the format of the message produced
by "git commit" when creating a commit. This patch updates
the example session in the tutorial to the new format.
It also adds in the missing diffstat summary lines, which
should have been added long ago.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previously, we used to print something along the lines of
Created commit abc9056 on master: Snib the sprock
but that output was sometimes confusing, as many projects use
the "subsystem: message" style of commit subjects (just like
this commit message does). When such improvements are done on
topic-branches, it's not uncommon to name the topic-branch the
same as the subsystem, leading to output like this:
Created commit abc9056 on i386: i386: Snib the sprock
which doesn't look very nice and can be highly confusing.
This patch alters the format so that the noise-word "commit"
is dropped except when it makes the output read better and
the commit subject is put inside parentheses. We also
emphasize the detached case so that users do not overlook it
in case the commit subject is long enough to extend to the
next line. The end result looks thusly:
normal case
Created abc9056 (i386: Snib the sprock) on i386
detached head
Created DETACHED commit abc9056 (i386: Snib the sprock)
While we're at it, we rename "initial commit" to "root-commit"
to align it with the argument to 'git log', producing this:
initial commit
Created root-commit abc9056 (i386: Snib the sprock) on i386
Documentation/gittutorial-2.txt is updated accordingly so that
new users recognize what they're looking at.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the conversion of HTML documentation to man pages
tutorial.html -> gittutorial (7)
tutorial-2.html -> gittutorial-2 (7)
cvs-migration.html -> gitcvs-migration (7)
diffcore.html -> gitdiffcore (7)
repository-layout.html -> gitrepository-layout (5)
hooks.html -> githooks (5)
glossary.html -> gitglossary (7)
core-tutorial.html -> gitcore-tutorial (7)
and the automatic update of references to these pages,
a little debris was left behind. We clear it away.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man format:
core-tutorial.txt -> gitcore-tutorial.txt
glossary.txt -> gitglossary.txt
But as the glossary is included in the user manual and as the new
gitglossary man page cannot be included as a whole in the user manual,
the actual glossary content is now in its own "glossary-content.txt"
new file. And this file is included by both the user manual and the
gitglossary man page.
Other documents that reference the above ones are changed accordingly
and sometimes improved a little too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man page format:
cvs-migration.txt -> gitcvs-migration.txt
tutorial.txt -> gittutorial.txt
tutorial-2.txt -> gittutorial-2.txt
These new man pages are put in section 7, and other documents that reference
the above ones are change accordingly.
[jc: with help from Nanako to clean things up]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
