When git-am is first run on an unborn branch, no ORIG_HEAD is created.
As such, any applied commits will remain even after a git am --abort.
To be consistent with the behavior of git am --abort when it is not run
from an unborn branch, we empty the index, and then destroy the branch
pointed to by HEAD if there is no ORIG_HEAD.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when a merge conflict occurs with am --3way, the index will be
modified with the results of any successfully merged files. These
changes to the index will not be reverted with a
"git read-tree --reset -u HEAD ORIG_HEAD", as git read-tree will not be
aware of how the current index differs from HEAD or ORIG_HEAD.
To fix this, we first reset any conflicting entries in the index. The
resulting index will contain the results of successfully merged files
introduced by the failed merge. We write this index to a tree, and then
use git read-tree to fast-forward this "index tree" back to ORIG_HEAD,
thus undoing all the changes from the failed merge.
When we are on an unborn branch, HEAD and ORIG_HEAD will not point to
valid trees. In this case, use an empty tree.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git am --skip is run, git am will copy HEAD's tree entries to the
index with "git reset HEAD". However, on an unborn branch, HEAD does not
point to a tree, so "git reset HEAD" will fail.
Fix this by treating HEAD as en empty tree when we are on an unborn
branch.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While on an unborn branch, git am -3 will fail to do a threeway merge as
it references HEAD as "our tree", but HEAD does not point to a valid
tree.
Fix this by using an empty tree as "our tree" when we are on an unborn
branch.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when a merge conflict occurs with am --3way, the index will be
modified with the results of any succesfully merged files (such as a new
file). These changes to the index will not be reverted with a
"git read-tree --reset -u HEAD HEAD", as git read-tree will not be aware
of how the current index differs from HEAD.
To fix this, we first reset any conflicting entries from the index. The
resulting index will contain the results of successfully merged files.
We write the index to a tree, then use git read-tree -m to fast-forward
the "index tree" back to HEAD, thus undoing all the changes from the
failed merge.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if a reflog entry's old or new SHA-1 was not resolvable to
an object, that SHA-1 was silently ignored. Instead, report such cases
as errors.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New function, extracted from fsck_handle_reflog_ent(). The extra
is_null_sha1() test for the new reference is currently unnecessary, as
reflogs are deleted when the reference itself is deleted. But it
doesn't hurt, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NULL_SHA1 is used to indicate an "invalid object name" throughout our
code (and the code of other git implementations), so it is vastly more
likely that an on-disk reference was set to this value due to a
software bug than that NULL_SHA1 is the legitimate SHA-1 of an actual
object. Therefore, if a loose reference has the value NULL_SHA1,
consider it to be broken.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this change, t7063.17 fails. The actual action though happens at
t7063.16 where the entry "two" is added back to index after being
removed in the .13. Here we expect a directory invalidate at .16 and
none at .17 where untracked cache is refreshed. But things do not go as
expected when GIT_TEST_SPLIT_INDEX is set.
The different behavior that happens at .16 when split index is used: the
entry "two", when deleted at .13, is simply marked "deleted". When .16
executes, the entry resurfaces from the version in base index. This
happens in merge_base_index() where add_index_entry() is called to add
"two" back from the base index.
This is where the bug comes from. The add_index_entry() is called with
ADD_CACHE_KEEP_CACHE_TREE flag because this version of "two" is not new,
it does not break either cache-tree or untracked cache. The code should
check this flag and not invalidate untracked cache. This causes a second
invalidation violates test expectation. The fix is obvious.
Noticed-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the --changes-block-size git-p4 test to use an account with
limited "maxresults" and "maxscanrows" values.
These conditions are applied in the server *before* the "-m maxchanges"
parameter to "p4 changes" is applied, and so the strategy that git-p4
uses for limiting the number of changes does not work. As a result,
the tests all fail.
Note that "maxscanrows" is set quite high, as it appears to not only
limit results from "p4 changes", but *also* limits results from
"p4 print". Files that have more than "maxscanrows" changes seem
(experimentally) to be impossible to print. There's no good way to
work around this.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Lex Spoon <lex@lexspoon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add additional tests of some corner-cases of the
--changes-block-size git-p4 parameter.
Also reduce the number of p4 changes created during the
tests, so that they complete faster.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Lex Spoon <lex@lexspoon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last argument of reencode_string_len() is an 'int *' which is
assigned the length of the converted string. When NO_ICONV is defined,
however, reencode_string_len() is stubbed out by the macro:
#define reencode_string_len(a,b,c,d,e) NULL
which never assigns a value to the final argument. When called like
this:
int n;
char *s = reencode_string_len(..., &n);
if (s)
do_something(s, n);
some compilers complain that 'n' is used uninitialized within the
conditional.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new function sleep_millisec() to delay execution for a short
time. This avoids the invocation of select() with just a timeout, but
no file descriptors. Such a use of select() is quit with EINVAL on
Windows, leading to no delay at all.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the goal is to wait for some random amount of time up to one
second, it is not necessary to compute with microsecond precision.
This is a preparation to re-use sleep_millisec().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to use the new function elsewhere in a moment.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, we do not have functions srandom() and random(). Use srand()
and rand(). These functions produce random numbers of lesser quality,
but for the purpose (a retry time-out) they are still good enough.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike "$EDITOR" and "$GIT_EDITOR" that can hold the path to the
command and initial options (e.g. "/path/to/emacs -nw"), 'git p4'
did not let the shell interpolate the contents of the environment
variable that name the editor "$P4EDITOR" (and "$EDITOR", too).
Make it in line with the rest of Git, as well as with Perforce.
* ld/p4-editor-multi-words:
git-p4: tests: use test-chmtime in place of touch
git-p4: fix handling of multi-word P4EDITOR
git-p4: add failing test for P4EDITOR handling
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
Introduce <branch>@{push} short-hand to denote the remote-tracking
branch that tracks the branch at the remote the <branch> would be
pushed to.
* jk/at-push-sha1:
for-each-ref: accept "%(push)" format
for-each-ref: use skip_prefix instead of starts_with
sha1_name: implement @{push} shorthand
sha1_name: refactor interpret_upstream_mark
sha1_name: refactor upstream_mark
remote.c: add branch_get_push
remote.c: return upstream name from stat_tracking_info
remote.c: untangle error logic in branch_get_upstream
remote.c: report specific errors from branch_get_upstream
remote.c: introduce branch_get_upstream helper
remote.c: hoist read_config into remote_get_1
remote.c: provide per-branch pushremote name
remote.c: hoist branch.*.remote lookup out of remote_get_1
remote.c: drop "remote" pointer from "struct branch"
remote.c: refactor setup of branch->merge list
remote.c: drop default_remote_name variable
Error messages from "git branch" called remote-tracking branches as
"remote branches".
* dl/branch-error-message:
branch: do not call a "remote-tracking branch" a "remote branch"
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
"git rerere forget" in a repository without rerere enabled gave a
cryptic error message; it should be a silent no-op instead.
* jk/rerere-forget-check-enabled:
rerere: exit silently on "forget" when rerere is disabled
The pull.ff configuration was supposed to override the merge.ff
configuration, but it didn't.
* pt/pull-ff-vs-merge-ff:
pull: parse pull.ff as a bool or string
pull: make pull.ff=true override merge.ff
The code to read pack-bitmap wanted to allocate a few hundred
pointers to a structure, but by mistake allocated and leaked memory
enough to hold that many actual structures. Correct the allocation
size and also have it on stack, as it is small enough.
* rs/plug-leak-in-pack-bitmaps:
pack-bitmaps: plug memory leak, fix allocation size for recent_bitmaps
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* ja/tutorial-asciidoctor-fix:
doc: fix unmatched code fences
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* jk/stripspace-asciidoctor-fix:
doc: fix unmatched code fences in git-stripspace
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'
Multi-ref transaction support we merged a few releases ago
unnecessarily kept many file descriptors open, risking to fail with
resource exhaustion. This is for 2.4.x track.
* mh/write-refs-sooner-2.4:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
The ref API did not handle cases where 'refs/heads/xyzzy/frotz' is
removed at the same time as 'refs/heads/xyzzy' is added (or vice
versa) very well.
* mh/ref-directory-file:
reflog_expire(): integrate lock_ref_sha1_basic() errors into ours
ref_transaction_commit(): delete extra "the" from error message
ref_transaction_commit(): provide better error messages
rename_ref(): integrate lock_ref_sha1_basic() errors into ours
lock_ref_sha1_basic(): improve diagnostics for ref D/F conflicts
lock_ref_sha1_basic(): report errors via a "struct strbuf *err"
verify_refname_available(): report errors via a "struct strbuf *err"
verify_refname_available(): rename function
refs: check for D/F conflicts among refs created in a transaction
ref_transaction_commit(): use a string_list for detecting duplicates
is_refname_available(): use dirname in first loop
struct nonmatching_ref_data: store a refname instead of a ref_entry
report_refname_conflict(): inline function
entry_matches(): inline function
is_refname_available(): convert local variable "dirname" to strbuf
is_refname_available(): avoid shadowing "dir" variable
is_refname_available(): revamp the comments
t1404: new tests of ref D/F conflicts within transactions
The "log --decorate" enhancement in Git 2.4 that shows the commit
at the tip of the current branch e.g. "HEAD -> master", did not
work with --decorate=full.
* mg/log-decorate-HEAD:
log: do not shorten decoration names too early
log: decorate HEAD with branch name under --decorate=full, too
There was a commented-out (instead of being marked to expect
failure) test that documented a breakage that was fixed since the
test was written; turn it into a proper test.
* sb/t1020-cleanup:
subdirectory tests: code cleanup, uncomment test
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
Git 2.4 broke setting verbosity and progress levels on "git clone"
with native transports.
* mh/clone-verbosity-fix:
clone: call transport_set_verbosity before anything else on the newly created transport
Some time ago, "git blame" (incorrectly) lost the convert_to_git()
call when synthesizing a fake "tip" commit that represents the
state in the working tree, which broke folks who record the history
with LF line ending to make their project portabile across
platforms while terminating lines in their working tree files with
CRLF for their platform.
* tb/blame-resurrect-convert-to-git:
blame: CRLF in the working tree and LF in the repo
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
The interface to custom low-level merge driver was modeled to be
capable of driving programs like "merge" (from the RCS suite) that
can produce result solely by looking at three files that hold
contents of common ancestor, ours and theirs. The information we
feed to the external drivers via the command line placeholders %O,
%A, and %B were designed to be purely about contents by giving
names of the temporary files that hold these variants without
exposing the original pathname. No matter where the result goes,
merging the same three variants should produce the same result,
contents is the king, that is the Git way.
The external driver interface, however, is meant to help people to
step outside the Git worldview, and sometimes people want to know
the final path that the resulting merged contents would be stored
in. Expose this to the external drivers via a new placeholder %P.
Requested-by: Andreas Gondek
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
