It's more efficient to use git_pathdup(), as it skips an
extra copy of the path. And by removing some calls to
git_path(), it makes it easier to audit for dangerous uses.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The odb_mkstemp() function expects the caller to provide a
fixed buffer to write the resulting tempfile name into. But
it creates the template using snprintf without checking the
return value. This means we could silently truncate the
filename.
In practice, it's unlikely that the truncation would end in
the template-pattern that mkstemp needs to open the file. So
we'd probably end up failing either way, unless the path was
specially crafted.
The simplest fix would be to notice the truncation and die.
However, we can observe that most callers immediately
xstrdup() the result anyway. So instead, let's switch to
using a strbuf, which is easier for them (and isn't a big
deal for the other 2 callers, who can just strbuf_release
when they're done with it).
Note that many of the callers used static buffers, but this
was purely to avoid putting a large buffer on the stack. We
never passed the static buffers out of the function, so
there's no complicated memory handling we need to change.
Signed-off-by: Jeff King <peff@peff.net>
Code clean-up.
* jk/fast-import-cleanup:
pack.h: define largest possible encoded object size
encode_in_pack_object_header: respect output buffer length
fast-import: use xsnprintf for formatting headers
fast-import: use xsnprintf for writing sha1s
The encode_in_pack_object_header() writes a variable-length
header to an output buffer, but it doesn't actually know
long the buffer is. At first glance, this looks like it
might be possible to overflow.
In practice, this is probably impossible. The smallest
buffer we use is 10 bytes, which would hold the header for
an object up to 2^67 bytes. Obviously we're not likely to
see such an object, but we might worry that an object could
lie about its size (causing us to overflow before we realize
it does not actually have that many bytes). But the argument
is passed as a uintmax_t. Even on systems that have __int128
available, uintmax_t is typically restricted to 64-bit by
the ABI.
So it's unlikely that a system exists where this could be
exploited. Still, it's easy enough to use a normal out/len
pair and make sure we don't write too far. That protects the
hypothetical 128-bit system, makes it harder for callers to
accidentally specify a too-small buffer, and makes the
resulting code easier to audit.
Note that the one caller in fast-import tried to catch such
a case, but did so _after_ the call (at which point we'd
have already overflowed!). This check can now go away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The stream_blob() function checks the return value of
snprintf and dies. This is more simply done with
xsnprintf (and matches the similar call in store_object).
The message the user would get is less specific, but since
the point is that this _shouldn't_ ever happen, that's OK.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have to write a sha1 with a newline, we do so by
copying both into a single buffer, so that we can issue a
single write() call.
We use snprintf but don't bother to check the output, since
we know it will fit. However, we should use xsnprintf() in
such a case so that we're notified if our assumption turns
out to be wrong (and to make it easier to audit for
unchecked snprintf calls).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/pack-name-cleanups:
index-pack: make pointer-alias fallbacks safer
replace snprintf with odb_pack_name()
odb_pack_keep(): stop generating keepfile name
sha1_file.c: make pack-name helper globally accessible
move odb_* declarations out of git-compat-util.h
In several places we write the name of the pack filename
into a fixed-size buffer using snprintf(), but do not check
the return value. As a result, a very long object directory
could cause us to quietly truncate the pack filename
(potentially leading to a corrupted repository, as a newly
written packfile could be missing its .pack extension).
We can use odb_pack_name() to do this with a strbuf (and
shorten the code, as well).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The odb_pack_keep() function generates the name of a .keep
file and opens it. This has two problems:
1. It requires a fixed-size buffer to create the filename
and doesn't notice when the result is truncated.
2. Of the two callers, one sometimes wants to open a
filename it already has, which makes things awkward (it
has to do so manually, and skips the leading-directory
creation).
Instead, let's have odb_pack_keep() just open the file.
Generating the name isn't hard, and a future patch will
switch callers over to odb_pack_name() anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the current branch is renamed with 'git branch -m/-M' or deleted
with 'git update-ref -m<msg> -d', the event is recorded in HEAD's log
with an empty message. In preparation for adding a more meaningful
message to HEAD's log in these cases, update delete_ref() to take a
message argument and pass it along to ref_transaction_delete().
Modify all callers to pass NULL for the new message argument; no
change in behavior is intended.
Note that this is relevant for HEAD's log but not for the deleted
ref's log, which is currently deleted along with the ref. Even if it
were not, an entry for the deletion wouldn't be present in the deleted
ref's log. files_transaction_commit() writes to the log if
REF_NEEDS_COMMIT or REF_LOG_ONLY are set, but lock_ref_for_update()
doesn't set REF_NEEDS_COMMIT for the deleted ref because REF_DELETING
is set. In contrast, the update for HEAD has REF_LOG_ONLY set by
split_head_update(), resulting in the deletion being logged.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* mh/fast-import-notes-fix-new:
fast-import: properly fanout notes when tree is imported
In typical uses of fast-import, trees are inherited from a parent
commit. In that case, the tree_entry for the branch looks like:
.versions[1].sha1 = $some_sha1
.tree = <tree structure loaded from $some_sha1>
However, when trees are imported, rather than inherited, that is not the
case. One can import a tree with a filemodify command, replacing the
root tree object.
e.g.
"M 040000 $some_sha1 \n"
In this case, the tree_entry for the branch looks like:
.versions[1].sha1 = $some_sha1
.tree = NULL
When adding new notes with the notemodify command, do_change_note_fanout
is called to get a notes count, and to do so, it loops over the
tree_entry->tree, but doesn't do anything when the tree is NULL.
In the latter case above, it means do_change_note_fanout thinks the tree
contains no notes, and new notes are added with no fanout.
Interestingly, do_change_note_fanout does check whether subdirectories
have a NULL .tree, in which case it uses load_tree(). Which means the
right behaviour happens when using the filemodify command to import
subdirectories.
This change makes do_change_note_fanount call load_tree() whenever the
tree_entry it is given has no tree loaded, making all cases handled
equally.
Signed-off-by: Mike Hommey <mh@glandium.org>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three codepaths that use a variable whose name is
pack_compression_level to affect how objects and deltas sent to a
packfile is compressed. Unlike zlib_compression_level that controls
the loose object compression, however, this variable was static to
each of these codepaths. Two of them read the pack.compression
configuration variable, using core.compression as the default, and
one of them also allowed overriding it from the command line.
The other codepath in bulk-checkin did not pay any attention to the
configuration.
Unify the configuration parsing to git_default_config(), where we
implement the parsing of core.loosecompression and core.compression
and make the former override the latter, by moving code to parse
pack.compression and also allow core.compression to give default to
this variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
This should be part of every program, as otherwise users do
not get translated error messages. However, some external
commands forgot to do so (e.g., git-credential-store). This
fixes them, and eliminates the repeated code in programs
that did remember to use it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every program which links against libgit.a must call this
function, or risk hitting an assert() in system_path() that
checks whether we have configured argv0_path (though only
when RUNTIME_PREFIX is defined, so essentially only on
Windows).
Looking at the diff, you can see that putting it into the
common main() saves us having to do it individually in each
of the external commands. But what you can't see are the
cases where we _should_ have been doing so, but weren't
(e.g., git-credential-store, and all of the t/helper test
programs).
This has been an accident-waiting-to-happen for a long time,
but wasn't triggered until recently because it involves one
of those programs actually calling system_path(). That
happened with git-credential-store in v2.8.0 with ae5f677
(lazily load core.sharedrepository, 2016-03-11). The
program:
- takes a lock file, which...
- opens a tempfile, which...
- calls adjust_shared_perm to fix permissions, which...
- lazy-loads the config (as of ae5f677), which...
- calls system_path() to find the location of
/etc/gitconfig
On systems with RUNTIME_PREFIX, this means credential-store
reliably hits that assert() and cannot be used.
We never noticed in the test suite, because we set
GIT_CONFIG_NOSYSTEM there, which skips the system_path()
lookup entirely. But if we were to tweak git_config() to
find /etc/gitconfig even when we aren't going to open it,
then the test suite shows multiple failures (for
credential-store, and for some other test helpers). I didn't
include that tweak here because it's way too specific to
this particular call to be worth carrying around what is
essentially dead code.
The implementation is fairly straightforward, with one
exception: there is exactly one caller (git.c) that actually
cares about the result of the function, and not the
side-effect of setting up argv0_path. We can accommodate
that by simply replacing the value of argv[0] in the array
we hand down to cmd_main().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are certain startup tasks that we expect every git
process to do. In some cases this is just to improve the
quality of the program (e.g., setting up gettext()). In
others it is a requirement for using certain functions in
libgit.a (e.g., system_path() expects that you have called
git_extract_argv0_path()).
Most commands are builtins and are covered by the git.c
version of main(). However, there are still a few external
commands that use their own main(). Each of these has to
remember to include the correct startup sequence, and we are
not always consistent.
Rather than just fix the inconsistencies, let's make this
harder to get wrong by providing a common main() that can
run this standard startup.
We basically have two options to do this:
- the compat/mingw.h file already does something like this by
adding a #define that replaces the definition of main with a
wrapper that calls mingw_startup().
The upside is that the code in each program doesn't need
to be changed at all; it's rewritten on the fly by the
preprocessor.
The downside is that it may make debugging of the startup
sequence a bit more confusing, as the preprocessor is
quietly inserting new code.
- the builtin functions are all of the form cmd_foo(),
and git.c's main() calls them.
This is much more explicit, which may make things more
obvious to somebody reading the code. It's also more
flexible (because of course we have to figure out _which_
cmd_foo() to call).
The downside is that each of the builtins must define
cmd_foo(), instead of just main().
This patch chooses the latter option, preferring the more
explicit approach, even though it is more invasive. We
introduce a new file common-main.c, with the "real" main. It
expects to call cmd_main() from whatever other objects it is
linked against.
We link common-main.o against anything that links against
libgit.a, since we know that such programs will need to do
this setup. Note that common-main.o can't actually go inside
libgit.a, as the linker would not pick up its main()
function automatically (it has no callers).
The rest of the patch is just adjusting all of the various
external programs (mostly in t/helper) to use cmd_main().
I've provided a global declaration for cmd_main(), which
means that all of the programs also need to match its
signature. In particular, many functions need to switch to
"const char **" instead of "char **" for argv. This effect
ripples out to a few other variables and functions, as well.
This makes the patch even more invasive, but the end result
is much better. We should be treating argv strings as const
anyway, and now all programs conform to the same signature
(which also matches the way builtins are defined).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fast-import" learned the same performance trick to avoid
creating too small a packfile as "git fetch" and "git push" have,
using *.unpackLimit configuration.
* ew/fast-import-unpack-limit:
fast-import: invalidate pack_id references after loosening
fast-import: implement unpack limit
"git fast-import --export-marks" would overwrite the existing marks
file even when it makes a dump from its custom die routine.
Prevent it from doing so when we have an import-marks file but
haven't finished reading it.
* fc/fast-import-broken-marks-file:
fast-import: do not truncate exported marks file
When loosening a pack, the current pack_id gets reused when
checkpointing and the import does not terminate. This causes
problems after checkpointing as the object table, branch, and
tag lists still contains pre-checkpoint references to the
recycled pack_id.
Merely clearing the object_table as suggested by Jeff King in
http://mid.gmane.org/20160517121330.GA7346@sigill.intra.peff.net
is insufficient as the marks set still contains references
to object entries.
Wrong pack_id references branch and tags lists do not cause
errors, but can lead to misleading crash reports and core dumps,
so they are also invalidated.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
Certain lines of the marks file might be corrupted (or the objects
missing due to a garbage collection), but that's no reason to truncate
the file and essentially destroy the rest of it.
Ideally missing objects should not cause a crash, we could just skip
them, but that's another patch.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With many incremental imports, small packs become highly
inefficient due to the need to readdir scan and load many
indices to locate even a single object. Frequent repacking and
consolidation may be prohibitively expensive in terms of disk
I/O, especially in large repositories where the initial packs
were aggressively optimized and marked with .keep files.
In those cases, users may be better served with loose objects
and relying on "git gc --auto".
This changes the default behavior of fast-import for small
imports found in test cases, so adjustments to t9300 were
necessary.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions compare two paths that are taken from file system.
Depending on the running file system, paths may need to be compared
case-sensitively or not, and maybe even something else in future. The
current names do not convey that well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
This function allocate a packed_git flex-array, and adds a
mysterious 2 bytes to the length of the pack_name field. One
is for the trailing NUL, but the other has no purpose. This
is probably cargo-culted from add_packed_git, which gets the
".idx" path and needed to allocate enough space to hold the
matching ".pack" (though since 48bcc1c, we calculate the
size there differently).
This site, however, is using the raw path of a tempfile, and
does not need the extra byte. We can just replace the
allocation with FLEX_ALLOC_STR, which handles the allocation
and the NUL for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message after a failing commit_lock_file() call sometimes
looks like this, causing confusion:
$ git remote add remote git@server.com/repo.git
error: could not commit config file .git/config
# Huh?!
# I didn't want to commit anything, especially not my config file!
While in the narrow context of the lockfile module using the verb
'commit' in the error message makes perfect sense, in the broader
context of git the word 'commit' already has a very specific meaning,
hence the confusion.
Reword these error messages to say "could not write" instead of "could
not commit".
While at it, include strerror in the error messages after writing the
config file or the credential store fails to provide some information
about the cause of the failure, and update the style of the error
message after writing the reflog fails to match surrounding error
messages (i.e. no '' around the pathname and no () around the error
description).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
"git log --date=local" used to only show the normal (default)
format in the local timezone. The command learned to take 'local'
as an instruction to use the local timezone with other formats,
e.g. "git show --date=rfc-local".
* jk/date-local:
t6300: add tests for "-local" date formats
t6300: make UTC and local dates different
date: make "local" orthogonal to date format
date: check for "local" before anything else
t6300: add test for "raw" date format
t6300: introduce test_date() helper
fast-import: switch crash-report date to iso8601
Documentation/rev-list: don't list date formats
Documentation/git-for-each-ref: don't list date formats
Documentation/config: don't list date formats
Documentation/blame-options: don't list date formats
strncpy is known to be a confusing function because of its
termination semantics. These calls are all correct, but it
takes some examination to see why. In particular, every one
of them expects to copy up to the length limit, and then
makes some arrangement for terminating the result.
We can just use memcpy, along with noting explicitly how the
result is terminated (if it is not already obvious). That
should make it more clear to a reader that we are doing the
right thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we already know the length of a string (e.g., because
we just malloc'd to fit it), it's nicer to use memcpy than
strcpy, as it makes it more obvious that we are not going to
overflow the buffer (because the size we pass matches the
size in the allocation).
This also eliminates calls to strcpy, which make auditing
the code base harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are allocating a struct with a FLEX_ARRAY member, we
generally compute the size of the array and then sprintf or
strcpy into it. Normally we could improve a dynamic allocation
like this by using xstrfmt, but it doesn't work here; we
have to account for the size of the rest of the struct.
But we can improve things a bit by storing the length that
we use for the allocation, and then feeding it to xsnprintf
or memcpy, which makes it more obvious that we are not
writing more than the allocated number of bytes.
It would be nice if we had some kind of helper for
allocating generic flex arrays, but it doesn't work that
well:
- the call signature is a little bit unwieldy:
d = flex_struct(sizeof(*d), offsetof(d, path), fmt, ...);
You need offsetof here instead of just writing to the
end of the base size, because we don't know how the
struct is packed (partially this is because FLEX_ARRAY
might not be zero, though we can account for that; but
the size of the struct may actually be rounded up for
alignment, and we can't know that).
- some sites do clever things, like over-allocating because
they know they will write larger things into the buffer
later (e.g., struct packed_git here).
So we're better off to just write out each allocation (or
add type-specific helpers, though many of these are one-off
allocations anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally use 32-byte buffers to format git's "type size"
header fields. These should not generally overflow unless
you can produce some truly gigantic objects (and our types
come from our internal array of constant strings). But it is
a good idea to use xsnprintf to make sure this is the case.
Note that we slightly modify the interface to
write_sha1_file_prepare, which nows uses "hdrlen" as an "in"
parameter as well as an "out" (on the way in it stores the
allocated size of the header, and on the way out it returns
the ultimate size of the header).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fast-import emits a crash report, it does so in the
user's local timezone. But because we omit the timezone
completely for DATE_LOCAL, a reader of the report does not
immediately know which time zone was used. Let's switch this
to ISO8601 instead, which includes the time zone.
This does mean we will show the time in UTC, but that's not
a big deal. A crash report like this will either be looked
at immediately (in which case nobody even looks at the
timestamp), or it will be passed along to a developer to
debug, in which case the original timezone is less likely to
be of interest.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_path() and mkpath() are handy helper functions but it is easy
to misuse, as the callers need to be careful to keep the number of
active results below 4. Their uses have been reduced.
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
Because git_path uses a static buffer that is shared with
calls to git_path, mkpath, etc, it can be dangerous to
assign the result to a variable or pass it to a non-trivial
function. The value may change unexpectedly due to other
calls.
None of the cases changed here has a known bug, but they're
worth converting away from git_path because:
1. It's easy to use git_pathdup in these cases.
2. They use constructs (like assignment) that make it
hard to tell whether they're safe or not.
The extra malloc overhead should be trivial, as an
allocation should be an order of magnitude cheaper than a
system call (which we are clearly about to make, since we
are constructing a filename). The real cost is that we must
remember to free the result.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5a688fe4 ("core.sharedrepository = 0mode" should set, not
loosen, 2009-03-25), we kept reminding ourselves:
NEEDSWORK: this should be renamed to finalize_temp_file() as
"moving" is only a part of what it does, when no patch between
master to pu changes the call sites of this function.
without doing anything about it. Let's do so.
The purpose of this function was not to move but to finalize. The
detail of the primarily implementation of finalizing was to link the
temporary file to its final name and then to unlink, which wasn't
even "moving". The alternative implementation did "move" by calling
rename(2), which is a fun tangent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
Often a fast-import stream builds a new commit on top of the
previous commit it built, and it often unconditionally emits a
"from" command to specify the first parent, which can be omitted in
such a case. This caused fast-import to forget the tree of the
previous commit and then re-read it from scratch, which was
inefficient. Optimize for this common case.
* mh/fast-import-optimize-current-from:
fast-import: do less work when given "from" matches current branch head
"git fast-import" learned to respond to the get-mark command via
its cat-blob-fd interface.
* mh/fast-import-get-mark:
fast-import: add a get-mark command
When building a fast-import stream, it's easy to forget the fact
that for non-merge commits happening on top of the current branch
head, there is no need for a "from" command. That is corroborated by
the fact that at least git-p4, hg-fast-export and felipec's
git-remote-hg all unconditionally use a "from" command.
Unfortunately, giving a "from" command always resets the branch
tree, forcing it to be re-read, and in many cases, the pack is also
closed and reopened through gfi_unpack_entry. Both are unnecessary
overhead, and the latter is particularly slow at least on OSX.
Avoid resetting the tree when it's unmodified, and avoid calling
gfi_unpack_entry when the given mark points to the same commit as
the current branch head.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is sometimes useful for importers to be able to read the SHA-1
corresponding to a mark that they have created via fast-import. For
example, they might want to embed the SHA-1 into the commit message of
a later commit. Or it might be useful for internal bookkeeping uses,
or for logging.
Add a "get-mark" command to "git fast-import" that allows the importer
to ask for the value of a mark that has been created earlier.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are deleting the reference, then we don't need to read the
reference's old value. It doesn't provide any race safety, because the
value read just before the delete is no "better" than the value that
would be read under lock during the delete. And even if the reference
previously didn't exist, we can call delete_ref() on it if we don't
provide an old_sha1 value.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
Clear the git_zstream variable at the start of git_deflate_init() etc.
so that callers don't have to do that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the ref transaction API around how "the ref should be
pointing at this object" is specified.
* mh/refs-have-new:
refs.h: remove duplication in function docstrings
update_ref(): improve documentation
ref_transaction_verify(): new function to check a reference's value
ref_transaction_delete(): check that old_sha1 is not null_sha1
ref_transaction_create(): check that new_sha1 is valid
commit: avoid race when creating orphan commits
commit: add tests of commit races
ref_transaction_delete(): remove "have_old" parameter
ref_transaction_update(): remove "have_old" parameter
struct ref_update: move "have_old" into "flags"
refs.c: change some "flags" to "unsigned int"
refs: remove the gap in the REF_* constant values
refs: move REF_DELETING to refs.c
"git fast-import" used to crash when it could not close and
conclude the resulting packfile cleanly.
* jk/fast-import-die-nicely-fix:
fast-import: avoid running end_packfile recursively
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
ref_transaction_delete() will get the same treatment in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an import has finished, we run end_packfile() to
finalize the data and move the packfile into place. If this
process fails, we call die() and end up in our die_nicely()
handler. Which unfortunately includes running end_packfile
to save any progress we made. We enter the function again,
and start operating on the pack_data struct while it is in
an inconsistent state, leading to a segfault.
One way to trigger this is to simply start two identical
fast-imports at the same time. They will both create the
same packfiles, which will then try to create identically
named ".keep" files. One will win the race, and the other
will die(), and end up with the segfault.
Since 3c078b9, we already reset the pack_data pointer to
NULL at the end of end_packfile. That covers the case of us
calling die() right after end_packfile, before we have
reinitialized the pack_data pointer. This new problem is
quite similar, except that we are worried about calling
die() _during_ end_packfile, not right after. Ideally we
would simply set pack_data to NULL as soon as we enter the
function, and operate on a copy of the pointer.
Unfortunately, it is not so easy. pack_data is a global, and
end_packfile calls into other functions which operate on the
global directly. We would have to teach each of these to
take an argument, and there is no guarantee that we would
catch all of the spots.
Instead, we can simply use a static flag to avoid
recursively entering the function. This is a little less
elegant, but it's short and fool-proof.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows git_path() to redirect info/fast-import to another place
if needed
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.
After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.
Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.
This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the ref transaction API so that we pass the reflog message to the
create/delete/update functions instead of to ref_transaction_commit.
This allows different reflog messages for each ref update in a multi-ref
transaction.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit_lock_file() fails, it now always calls
rollback_lock_file() internally, so there is no need to call that
function here.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An attempt to remove the entire tree in the "git fast-import" input
stream caused it to misbehave.
* mb/fast-import-delete-root:
fast-import: fix segfault in store_tree()
t9300: test filedelete command
An attempt to remove the entire tree in the "git fast-import" input
stream caused it to misbehave.
* mb/fast-import-delete-root:
fast-import: fix segfault in store_tree()
t9300: test filedelete command
Code clean-up.
* jk/commit-author-parsing:
determine_author_info(): copy getenv output
determine_author_info(): reuse parsing functions
date: use strbufs in date-formatting functions
record_author_date(): use find_commit_header()
record_author_date(): fix memory leak on malformed commit
commit: provide a function to find a header in a buffer
With sufficiently long refnames, fast-import could have overflown
an on-stack buffer.
* jk/fast-import-fixes:
fast-import: fix buffer overflow in dump_tags
fast-import: clean up pack_data pointer in end_packfile
The second batch of the transactional ref update series.
* rs/ref-transaction-1: (22 commits)
update-ref --stdin: pass transaction around explicitly
update-ref --stdin: narrow scope of err strbuf
refs.c: make delete_ref use a transaction
refs.c: make prune_ref use a transaction to delete the ref
refs.c: remove lock_ref_sha1
refs.c: remove the update_ref_write function
refs.c: remove the update_ref_lock function
refs.c: make lock_ref_sha1 static
walker.c: use ref transaction for ref updates
fast-import.c: use a ref transaction when dumping tags
receive-pack.c: use a reference transaction for updating the refs
refs.c: change update_ref to use a transaction
branch.c: use ref transaction for all ref updates
fast-import.c: change update_branch to use ref transactions
sequencer.c: use ref transactions for all ref updates
commit.c: use ref transactions for updates
replace.c: use the ref transaction functions for updates
tag.c: use ref transactions when doing updates
refs.c: add transaction.status and track OPEN/CLOSED
refs.c: make ref_transaction_begin take an err argument
...
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change update_branch() to use ref transactions for updates.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Branch tree is NULLified by filedelete command if we are trying
to delete root tree. Add sanity check and use load_tree() in that case.
Signed-off-by: Maxim Bublis <satori@yandex-team.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of the date functions write into fixed-size buffers.
This is a minor pain, as we have to take special
precautions, and frequently end up copying the result into a
strbuf or heap-allocated buffer anyway (for which we
sometimes use strcpy!).
Let's instead teach parse_date, datestamp, etc to write to a
strbuf. The obvious downside is that we might need to
perform a heap allocation where we otherwise would not need
to. However, it turns out that the only two new allocations
required are:
1. In test-date.c, where we don't care about efficiency.
2. In determine_author_info, which is not performance
critical (and where the use of a strbuf will help later
refactoring).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new annotated tag, we sprintf the refname
into a static-sized buffer. If we have an absurdly long
tagname, like:
git init repo &&
cd repo &&
git commit --allow-empty -m foo &&
git tag -m message mytag &&
git fast-export mytag |
perl -lpe '/^tag/ and s/mytag/"a" x 8192/e' |
git fast-import <input
we'll overflow the buffer. We can fix it by using a strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a global pointer pack_data pointing to the current
pack we have open. Inside end_packfile we have two new
pointers, old_p and new_p. The latter points to pack_data,
and the former points to the new "installed" version of the
packfile we get when we hand the file off to the regular
sha1_file machinery. When then free old_p.
Presumably the extra old_p pointer was there so that we
could overwrite pack_data with new_p and still free old_p,
but we don't do that. We just leave pack_data pointing to
bogus memory, and don't overwrite it until we call
start_packfile again (if ever).
This can cause problems for our die routine, which calls
end_packfile to clean things up. If we die at the wrong
moment, we can end up looking at invalid memory in
pack_data left after the last end_packfile().
Instead, let's make sure we set pack_data to NULL after we
free it, and make calling endfile() again with a NULL
pack_data a noop (there is nothing to end).
We can further make things less confusing by dropping old_p
entirely, and moving new_p closer to its point of use.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_*()` family instead of `git_config()` to take
advantage of the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a file change in a commit, we expect one of:
1. A mark.
2. An "inline" keyword.
3. An object sha1.
The handling of spaces is inconsistent between the three
options. Option 1 calls a sub-function which checks for the
space, but doesn't parse past it. Option 2 parses the space,
then deliberately avoids moving the pointer past it. Option
3 detects the space locally but doesn't move past it.
This is confusing, because it looks like option 1 forgets to
check for the space (it's just buried). And option 2 checks
for "inline ", but only moves strlen("inline") characters
forward, which looks like a bug but isn't.
We can make this more clear by just having each branch move
past the space as it is checked (and we can replace the
doubled use of "inline" with a call to skip_prefix).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fast-import does a lot of parsing of commands and
dispatching to sub-functions. For example, given "option
foo", we might recognize "option " using starts_with, and
then hand it off to parse_option() to do the rest.
However, we do not let parse_option know that we have parsed
the first part already. It gets the full buffer, and has to
skip past the uninteresting bits. Some functions simply add
a magic constant:
char *option = command_buf.buf + 7;
Others use strlen:
char *option = command_buf.buf + strlen("option ");
And others use strchr:
char *option = strchr(command_buf.buf, ' ') + 1;
All of these are brittle and easy to get wrong (especially
given that the starts_with call and the code that assumes
the presence of the prefix are far apart). Instead, we can
use skip_prefix, and just pass each handler a pointer to its
arguments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to match a prefix and then skip past it
with a magic number, like:
if (starts_with(foo, "bar"))
foo += 3;
This is easy to get wrong, since you have to count the
prefix string yourself, and there's no compiler check if the
string changes. We can use skip_prefix to avoid the magic
numbers here.
Note that some of these conversions could be much shorter.
For example:
if (starts_with(arg, "--foo=")) {
bar = arg + 6;
continue;
}
could become:
if (skip_prefix(arg, "--foo=", &bar))
continue;
However, I have left it as:
if (skip_prefix(arg, "--foo=", &v)) {
bar = v;
continue;
}
to visually match nearby cases which need to actually
process the string. Like:
if (skip_prefix(arg, "--foo=", &v)) {
bar = atoi(v);
continue;
}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fast-import shares code between its command-line parser and
the "option" command. To do so, it strips the "--" from any
command-line options and passes them to the option parser.
However, it does not confirm that the option even begins
with "--" before blindly passing "arg + 2".
It does confirm that the option starts with "-", so the only
affected case was:
git fast-import -
which would read uninitialized memory after the argument. We
can fix it by using skip_prefix and checking the result. As
a bonus, this gets rid of some magic numbers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid scanning strings twice, once with strchr() and then with
strlen(), by using strchrnul().
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rohit Mani <rohit.mani@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give "update-refs" a "--stdin" option to read multiple update
requests and perform them in an all-or-none fashion.
* bk/refs-multi-update:
update-ref: add test cases covering --stdin signature
update-ref: support multiple simultaneous updates
refs: add update_refs for multiple simultaneous updates
refs: add function to repack without multiple refs
refs: factor delete_ref loose ref step into a helper
refs: factor update_ref steps into helpers
refs: report ref type from lock_any_ref_for_update
reset: rename update_refs to reset_refs
We liberally use "committish" and "commit-ish" (and "treeish" and
"tree-ish"); as these are non-words, let's unify these terms to
their dashed form. More importantly, clarify the documentation on
object peeling using these terms.
* rh/ishes-doc:
glossary: fix and clarify the definition of 'ref'
revisions.txt: fix and clarify <rev>^{<type>}
glossary: more precise definition of tree-ish (a.k.a. treeish)
use 'commit-ish' instead of 'committish'
use 'tree-ish' instead of 'treeish'
glossary: define commit-ish (a.k.a. committish)
glossary: mention 'treeish' as an alternative to 'tree-ish'
Replace 'committish' in documentation and comments with 'commit-ish'
to match gitglossary(7) and to be consistent with 'tree-ish'.
The only remaining instances of 'committish' are:
* variable, function, and macro names
* "(also committish)" in the definition of commit-ish in
gitglossary[7]
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace 'treeish' in documentation and comments with 'tree-ish' to
match gitglossary(7).
The only remaining instances of 'treeish' are:
* variable, function, and macro names
* "(also treeish)" in the definition of tree-ish in gitglossary(7)
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/fast-import-empty-ls:
fast-import: allow moving the root tree
fast-import: allow ls or filecopy of the root tree
fast-import: set valid mode on root tree in "ls"
t9300: document fast-import empty path issues
Expose lock_ref_sha1_basic's type_p argument to callers of
lock_any_ref_for_update. Update all call sites to ignore it by passing
NULL for now.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because fast-import.c::tree_content_remove does not check for the empty
path, it is not possible to move the root tree to a subdirectory.
Instead the error "Path not in branch" is produced (note the double
space where the empty path has been inserted).
Fix this by explicitly checking for the empty path and handling it.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 178e1de (fast-import: don't allow 'ls' of path with empty
components, 2012-03-09) restricted paths which:
. contain an empty directory component (e.g. foo//bar is invalid),
. end with a directory separator (e.g. foo/ is invalid),
. start with a directory separator (e.g. /foo is invalid).
However, the implementation also caught the empty path, which should
represent the root tree. Relax this restriction so that the empty path
is explicitly allowed and refers to the root tree.
Reported-by: Dave Abrahams <dave@boostpro.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prevents a failure later when we lift the restriction on ls with
the empty path.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimization for fast-export by avoiding unnecessarily resolving
arbitrary object name and parsing object when only presence and
type information is necessary, etc.
* fc/fast-export-persistent-marks:
fast-{import,export}: use get_sha1_hex() to read from marks file
fast-export: don't parse commits while reading marks file
fast-export: do not parse non-commit objects while reading marks file
It's wrong to call get_sha1() if they should be SHA-1s, plus
inefficient.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues 68 errors (two errors for each main() function) such
as the following:
SP git.c
git.c:510:5: error: too many arguments for function mingw_main
git.c:510:5: error: symbol 'mingw_main' redeclared with different type \
(originally declared at git.c:510) - different argument counts
The errors are caused by the 'main' macro used by the MinGW build
to provide a replacement main() function. The original main function
is effectively renamed to 'mingw_main' and is called from the new
main function. The replacement main is used to execute certain actions
common to all git programs on MinGW (e.g. ensure the standard I/O
streams are in binary mode).
In order to suppress the errors, we change the macro to include the
parameters in the declaration of the mingw_main function.
Unfortunately, this change provokes both sparse and gcc to complain
about 9 calls to mingw_main(), such as the following:
CC git.o
git.c: In function 'main':
git.c:510: warning: passing argument 2 of 'mingw_main' from \
incompatible pointer type
git.c:510: note: expected 'const char **' but argument is of \
type 'char **'
In order to suppress these warnings, since both of the main
functions need to be declared with the same prototype, we
change the declaration of the 9 main functions, thus:
int main(int argc, char **argv)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
