This teaches the --color-words engine a more general interface that
supports two new modes:
* --word-diff=plain, inspired by the 'wdiff' utility (most similar to
'wdiff -n <old> <new>'): uses delimiters [-removed-] and {+added+}
* --word-diff=porcelain, which generates an ad-hoc machine readable
format:
- each diff unit is prefixed by [-+ ] and terminated by newline as
in unified diff
- newlines in the input are output as a line consisting only of a
tilde '~'
Both of these formats still support color if it is enabled, using it
to highlight the differences. --color-words becomes a synonym for
--word-diff=color, which is the color-only format. Also adds some
compatibility/convenience options.
Thanks to Junio C Hamano and Miles Bader for good ideas.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
23a64c9e (conflict-marker-size: new attribute, 2010-01-16) introduced the
new attribute and also pass the conflict marker size as %L to merge driver
commands. This documents the substitution.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
The example was taken from aa4ed402c9
(Add 'filter' attribute and external filter driver definition).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitattributes documentation has a section on the "diff"
attribute, with subsections for each of the things you might
want to configure in your diff config section (external
diff, hunk headers, etc). The first such subsection
specifically notes that the definition of the diff driver
should go into $GIT_DIR/config, but subsequent sections do
not.
This location is implied if you are reading the
documentation sequentially, but it is not uncommon for a new
user to jump to (or be referred to) a specific section. For
a new user who does not know git well enough to recognize
the config syntax, it is not clear that those directives
don't also go into the gitattributes file.
This patch just mentions the config file in each subsection,
similar to the way it is mentioned in the first.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.1:
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
* maint-1.6.0:
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
Use the term "toplevel of the work tree" in gitattributes.txt and
gitignore.txt to define the limits of the search for those files.
Signed-off-by: Jason Merrill <jason@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules how the patterns are matched against path names are the same
for .gitattribute and .gitignore files.
This also replace the notion "glob pattern" by "pattern" because
gitignore.txt talks about "glob" only in some contexts where the pattern
is mentioned.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "wordRegex" for configuration variable names. Use "word_regex" for C
language tokens.
Signed-off-by: Boyd Stephen Smith Jr. <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the --color-words splitting regular expression configurable via
the diff driver's 'wordregex' attribute. The user can then set the
driver on a file in .gitattributes. If a regex is given on the
command line, it overrides the driver's setting.
We also provide built-in regexes for the languages that already had
funcname patterns, and add an appropriate diff driver entry for C/++.
(The patterns are designed to run UTF-8 sequences into a single chunk
to make sure they remain readable.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add information on new git-gui and gitk command-line options,
configuration variables, and the encoding attribute.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start 1.6.0.4 cycle
add instructions on how to send patches to the mailing list with Gmail
Documentation/gitattributes: Add subsection header for each attribute
git send-email: avoid leaking directory file descriptors.
send-pack: do not send out single-level refs such as refs/stash
fix overlapping memcpy in normalize_absolute_path
pack-objects: avoid reading uninitalized data
correct cache_entry allocation
Conflicts:
RelNotes
This makes attributes easier to find; before this patch some
attributes had individual subsections, and some didn't.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: change dashed git-commit-tree to git commit-tree
Documentation: clarify information about 'ident' attribute
bash completion: add doubledash to "git show"
Use test-chmtime -v instead of perl in t5000 to get mtime of a file
Add --verbose|-v to test-chmtime
asciidoc: add minor workaround to add an empty line after code blocks
Plug a memleak in builtin-revert
Add file delete/create info when we overflow rename_limit
Install git-cvsserver in $(bindir)
Install git-shell in bindir, too
The documentation spoke of the attribute being set "to" a path; this can
mistakenly be interpreted as "the attribute needs to have its value set to
some kind of path". This clarifies things.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch also changes the term "custom diff driver" to
"external diff driver"; now that there are more facets of a
"custom driver" than just external diffing, it makes sense
to refer to the configuration of "diff.foo.*" as the "foo
diff driver", with "diff.foo.command" as the "external
driver for foo".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for recognition of Objective-C class & instance methods,
C functions, and class implementation/interfaces.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint: (41 commits)
Clarify commit error message for unmerged files
Use strchrnul() instead of strchr() plus manual workaround
Use remove_path from dir.c instead of own implementation
Add remove_path: a function to remove as much as possible of a path
git-submodule: Fix "Unable to checkout" for the initial 'update'
Clarify how the user can satisfy stash's 'dirty state' check.
Remove empty directories in recursive merge
Documentation: clarify the details of overriding LESS via core.pager
Update release notes for 1.6.0.3
checkout: Do not show local changes when in quiet mode
for-each-ref: Fix --format=%(subject) for log message without newlines
git-stash.sh: don't default to refs/stash if invalid ref supplied
maint: check return of split_cmdline to avoid bad config strings
builtin-prune.c: prune temporary packs in <object_dir>/pack directory
Do not perform cross-directory renames when creating packs
Use dashless git commands in setgitperms.perl
git-remote: do not use user input in a printf format string
make "git remote" report multiple URLs
Start draft release notes for 1.6.0.3
git-repack uses --no-repack-object, not --no-repack-delta.
...
Conflicts:
RelNotes
* bc/maint-diff-hunk-header-fix:
t4018-diff-funcname: test syntax of builtin xfuncname patterns
diff hunk pattern: fix misconverted "\{" tex macro introducers
diff: use extended regexp to find hunk headers
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Conflicts:
Documentation/gitattributes.txt
* bc/maint-diff-hunk-header-fix:
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Cosmetical command name fix
Start conforming code to "git subcmd" style part 3
t9700/test.pl: remove File::Temp requirement
t9700/test.pl: avoid bareword 'STDERR' in 3-argument open()
GIT 1.6.0.2
Fix some manual typos.
Use compatibility regex library also on FreeBSD
Use compatibility regex library also on AIX
Update draft release notes for 1.6.0.2
Use compatibility regex library for OSX/Darwin
git-svn: Fixes my() parameter list syntax error in pre-5.8 Perl
Git.pm: Use File::Temp->tempfile instead of ->new
t7501: always use test_cmp instead of diff
Start conforming code to "git subcmd" style part 2
diff: Help "less" hide ^M from the output
checkout: do not check out unmerged higher stages randomly
Conflicts:
Documentation/git.txt
Documentation/gitattributes.txt
Makefile
diff.c
t/t7201-co.sh
Currently, the hunk headers produced by 'diff -p' are customizable by
setting the diff.*.funcname option in the config file. The 'funcname' option
takes a basic regular expression. This functionality was designed using the
GNU regex library which, by default, allows using backslashed versions of
some extended regular expression operators, even in Basic Regular Expression
mode. For example, the following characters, when backslashed, are
interpreted according to the extended regular expression rules: ?, +, and |.
As such, the builtin funcname patterns were created using some extended
regular expression operators.
Other platforms which adhere more strictly to the POSIX spec do not
interpret the backslashed extended RE operators in Basic Regular Expression
mode. This causes the pattern matching for the builtin funcname patterns to
fail on those platforms.
Introduce a new option 'xfuncname' which uses extended regular expressions,
and advertise it _instead_ of funcname. Since most users are on GNU
platforms, the majority of funcname patterns are created and tested there.
Advertising only xfuncname should help to avoid the creation of non-portable
patterns which work with GNU regex but not elsewhere.
Additionally, the extended regular expressions may be less ugly and
complicated compared to the basic RE since many common special operators do
not need to be backslashed.
For example, the GNU Basic RE:
^[ ]*\\(\\(public\\|static\\).*\\)$
becomes the following Extended RE:
^[ ]*((public|static).*)$
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only part of the hunk header that we can change is the "TEXT"
portion. Additionally, a few grammatical errors have been corrected.
Signed-off-by: Garry Dolley <gdolley@ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise it will always print the class-name rather
than the name of the function inside that class.
While we're at it, reorder the gitattributes manpage to
list the built-in funcname pattern names in alphabetical
order.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS section of gitattibutes and gitmodule fail to clearly
specify the name of the in tree files used. This patch brings in the
initial `.' and the fact that the `.gitmodules' file should reside at
the top-level of the working tree.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitattributes: -crlf is not binary
git-apply: Loosen "match_beginning" logic
Fix example in git-name-rev documentation
shell: do not play duplicated definition games to shrink the executable
Fix use of hardlinks in "make install"
pack-objects: Allow missing base objects when creating thin packs
The description of crlf attribute incorrectly said that "-crlf" means
binary. It is true that for binary files you would want "-crlf", but
that is not the same thing.
We also have supported attribute macros and via that mechanism a handy
"binary" to specify "-crlf -diff" at the same time. It was not documented
anywhere as far as I can tell, even though the support was there from
the very beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Find lines with <h1>..<h6> tags.
[jc: while at it, reordered entries to sort alphabetically.]
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All BibTeX entries starts with an @ followed by an entry type. Since
there are many entry types and own can be defined, the pattern matches
legal entry type names instead of just the default types (which would
be a long list). The pattern also matches strings and comments since
they will also be useful to position oneself in a bib-file.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the hunk header pattern text was written patterns for Ruby and
Pascal/Delphi have been added. For users to be able to find them they
should be documented not only in code.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* qq/maint:
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
Conflicts:
Documentation/gitattributes.txt
The document gives overall definition of states in DESCRIPTION, describes
various aspects of git operations that can be influenced in EFFECTS, and
finally gives examples in the EXAMPLE section. Archive creation however
was somehow documented after the EXAMPLE section, not insode EFFECTS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some manual pages use teletype font to set command names. We
change them to use italics, instead. This creates a visual
distinction between names of commands and command lines that
can be typed at the command line. It is also more consistent
with other man pages outside Git.
In this patch, the commands named are non-git commands like bash.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paths marked with this attribute are not output to git-archive
output.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.5.4.5
Documentation: clarify use of .git{ignore,attributes} versus .git/info/*
t/t3800-mktag.sh: use test_must_fail rather than '!'
Conflicts:
t/t3800-mktag.sh
gitignore patterns can be read from three different
files, while gitattributes can come from two files. Let's
provide some hints to the user about the differences and how
they are typically used.
Suggested by Toby Corkindale, but gratuitously reworded by Jeff King.
Signed-off-by: Toby Corkindale <toby.corkindale@rea-group.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CRLF conversion bears a slight chance of corrupting data.
autocrlf=true will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by git. For text
files this is the right thing to do: it corrects line endings
such that we have only LF line endings in the repository.
But for binary files that are accidentally classified as text the
conversion can corrupt data.
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
git that this file is binary and git will handle the file
appropriately.
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary
files cannot be distinguished. In both cases CRLFs are removed
in an irreversible way. For text files this is the right thing
to do because CRLFs are line endings, while for binary files
converting CRLFs corrupts data.
This patch adds a mechanism that can either warn the user about
an irreversible conversion or can even refuse to convert. The
mechanism is controlled by the variable core.safecrlf, with the
following values:
- false: disable safecrlf mechanism
- warn: warn about irreversible conversions
- true: refuse irreversible conversions
The default is to warn. Users are only affected by this default
if core.autocrlf is set. But the current default of git is to
leave core.autocrlf unset, so users will not see warnings unless
they deliberately chose to activate the autocrlf mechanism.
The safecrlf mechanism's details depend on the git command. The
general principles when safecrlf is active (not false) are:
- we warn/error out if files in the work tree can modified in an
irreversible way without giving the user a chance to backup the
original file.
- for read-only operations that do not modify files in the work tree
we do not not print annoying warnings.
There are exceptions. Even though...
- "git add" itself does not touch the files in the work tree, the
next checkout would, so the safety triggers;
- "git apply" to update a text file with a patch does touch the files
in the work tree, but the operation is about text files and CRLF
conversion is about fixing the line ending inconsistencies, so the
safety does not trigger;
- "git diff" itself does not touch the files in the work tree, it is
often run to inspect the changes you intend to next "git add". To
catch potential problems early, safety triggers.
The concept of a safety check was originally proposed in a similar
way by Linus Torvalds. Thanks to Dimitry Potapov for insisting
on getting the naked LF/autocrlf=true case right.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
