The mailmap mechanism unnecessarily downcased the e-mail addresses
in the output, and also ignored the human name when it is a single
character name.
This now has become Eric Sunshine's series, even though it still is
under jc/ hierarchy.
* jc/mailmap-case-insensitivity:
mailmap: style fixes
mailmap: debug: avoid passing NULL to fprintf() '%s' conversion specification
mailmap: debug: eliminate -Wformat field precision type warning
mailmap: debug: fix malformed fprintf() format conversion specification
mailmap: debug: fix out-of-order fprintf() arguments
mailmap: do not downcase mailmap entries
t4203: demonstrate loss of uppercase characters in canonical email
mailmap: do not lose single-letter names
t4203: demonstrate loss of single-character name in mailmap entry
This detected a mismerge of one of "add-2.0" topics to the 'jch'
and 'pu' branches.
* jc/simple-add-must-be-a-no-op:
t2202: make sure "git add" (no args) stays a no-op
Avoid failing "git diff" when core.safecrlf is set to true, because
the user cannot tell where the breakage is in preparation for fixing
and committing.
* jc/maint-diff-core-safecrlf:
diff: demote core.safecrlf=true to core.safecrlf=warn
This test confirms that a file can be ignored during git p4 sync if if is
excluded in P4 client specification.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/test-ln-s-add:
t4011: remove SYMLINKS prerequisite
t6035: use test_ln_s_add to remove SYMLINKS prerequisite
t3509, t4023, t4114: use test_ln_s_add to remove SYMLINKS prerequisite
t3100: use test_ln_s_add to remove SYMLINKS prerequisite
t3030: use test_ln_s_add to remove SYMLINKS prerequisite
t0000: use test_ln_s_add to remove SYMLINKS prerequisite
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases)
tests: introduce test_ln_s_add
t3010: modernize style
test-chmtime: Fix exit code on Windows
Allow our tests to run with newer Apache.
* jk/apache-test-for-2.4:
lib-httpd/apache.conf: check version only after mod_version loads
t/lib-httpd/apache.conf: configure an MPM module for apache 2.4
t/lib-httpd/apache.conf: load compat access module in apache 2.4
t/lib-httpd/apache.conf: load extra auth modules in apache 2.4
t/lib-httpd/apache.conf: do not use LockFile in apache >= 2.4
* rs/tar-tests:
t5000: test long filenames
t5000: simplify tar-tree tests
t5000: use check_tar for prefix test
t5000: factor out check_tar
t5000, t5003: create directories for extracted files lazily
t5000: integrate export-subst tests into regular tests
"git cat-file --batch-check=<format>" is added, primarily to allow
on-disk footprint of objects in packfiles (often they are a lot
smaller than their true size, when expressed as deltas) to be
reported.
* jk/in-pack-size-measurement:
pack-revindex: radix-sort the revindex
pack-revindex: use unsigned to store number of objects
cat-file: split --batch input lines on whitespace
cat-file: add %(objectsize:disk) format atom
cat-file: add --batch-check=<format>
cat-file: refactor --batch option parsing
cat-file: teach --batch to stream blob objects
t1006: modernize output comparisons
teach sha1_object_info_extended a "disk_size" query
zero-initialize object_info structs
Add a command to allow previewing the contents locally before
pushing it out, when working with a MediaWiki remote.
I personally do not think this belongs to Git. If you are working
on a set of AsciiDoc source files, you sure do want to locally
format to preview what you will be pushing out, and if you are
working on a set of C or Java source files, you do want to test it
before pushing it out, too. That kind of thing belongs to your
build script, not to your SCM.
But I'll let it pass, as this is only a contrib/ thing.
* bp/mediawiki-preview:
git-remote-mediawiki: add preview subcommand into git mw
git-remote-mediawiki: add git-mw command
git-remote-mediawiki: factoring code between git-remote-mediawiki and Git::Mediawiki
git-remote-mediawiki: update tests to run with the new bin-wrapper
git-remote-mediawiki: add a git bin-wrapper for developement
wrap-for-bin: make bin-wrappers chainable
git-remote-mediawiki: introduction of Git::Mediawiki.pm
Logic to auto-detect character encodings in the commit log message
did not reject overlong and invalid UTF-8 characters.
* bc/commit-invalid-utf8:
commit: reject non-characters
commit: reject overlong UTF-8 sequences
commit: reject invalid UTF-8 codepoints
* es/overlapping-range-set:
range_set: fix coalescing bug when range is a subset of another
t4211: fix broken test when one -L range is subset of another
"git clone -s/-l" is a filesystem level copy and does not offer any
protection against source repository being corrupt. While the
connectivity validation checks commits and trees being readable, it
made the otherwise instantaneous local modes of clone much more
expensive, without protecting blob data from bitflips.
* jk/maint-clone-shared-no-connectivity-validation:
clone: drop connectivity check for local clones
"git rebase [-i]" used to leave just "rebase" as its reflog message
for some operations. This rewords them to be more informative.
* rr/rebase-reflog-message-reword:
rebase -i: use a better reflog message
rebase: use a better reflog message
"git apply" parsed patches that add new files, generated by programs
other than Git, incorrectly. This is an old breakage in v1.7.11.
* tr/maint-apply-non-git-patch-parsefix:
apply: carefully strdup a possibly-NULL name
"git pull" into nothing trashed "local changes" that were in the
index.
* jk/pull-into-dirty-unborn:
pull: merge into unborn by fast-forwarding from empty tree
pull: update unborn branch tip after index
Many "git submodule" operations did not work on a submodule at a
path whose name is not in ASCII.
* fg/submodule-non-ascii-path:
t7400: test of UTF-8 submodule names pass under Mac OS
handle multibyte characters in name
Logic used by git-send-email to suppress cc mishandled names like "A
U. Thor" <author@example.xz>, where the human readable part needs to
be quoted (the user input may not have the double quotes around the
name, and comparison was done between quoted and unquoted strings).
It also mishandled names that need RFC2047 quoting.
* mt/send-email-cc-match-fix:
send-email: sanitize author when writing From line
send-email: add test for duplicate utf8 name
test-send-email: test for pre-sanitized self name
t/send-email: test suppress-cc=self with non-ascii
t/send-email: add test with quoted sender
send-email: make --suppress-cc=self sanitize input
t/send-email: test suppress-cc=self on cccmd
send-email: fix suppress-cc=self on cccmd
t/send-email.sh: add test for suppress-cc=self
In addition to the choice from "rebase, merge, or checkout-detach",
allow a custom command to be used in "submodule update" to update
the working tree of submodules.
* cp/submodule-custom-update:
submodule update: allow custom command to update submodule working tree
"git format-patch" learned "--from[=whom]" option, which sets the
"From: " header to the specified person (or the person who runs the
command, if "=whom" part is missing) and move the original author
information to an in-body From: header as necessary.
* jk/format-patch-from:
teach format-patch to place other authors into in-body "From"
pretty.c: drop const-ness from pretty_print_context
The configuration variable "merge.ff" was cleary a tri-state to
choose one from "favor fast-forward when possible", "always create
a merge even when the history could fast-forward" and "do not
create any merge, only update when the history fast-forwards", but
the command line parser did not implement the usual convention of
"last one wins, and command line overrides the configuration"
correctly.
* mv/merge-ff-tristate:
merge: handle --ff/--no-ff/--ff-only as a tri-state option
The email addresses in the records read from the .mailmap file are
downcased very early, and then used to match against e-mail
addresses in the input. Because we do use case insensitive version
of string list to manage these entries, there is no need to do this,
and worse yet, downcasing the rewritten/canonical e-mail read from
the .mailmap file loses information.
Stop doing that, and also make the string list used to keep multiple
names for an mailmap entry case insensitive (the code that uses the
list, lookup_prefix(), expects a case insensitive match).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The email addresses read from .mailmap are downcased before being
inserted into the mailmap data structure, which undesirably loses
information. It is impossible, for instance, to map <first.last@host>
to <First.Last@host>. Demonstrate this problem.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In parse_name_and_email() function, there is this line:
*name = (nstart < nend ? nstart : NULL);
When the function is given a buffer "A <A@example.org> <old@x.z>",
nstart scans from the beginning of the buffer, skipping whitespaces
(there isn't any, so nstart points at the buffer), while nend starts
from one byte before the first '<' and skips whitespaces backwards
and stops at the first non-whitespace (i.e. it hits "A" at the
beginning of the buffer). nstart == nend in this case for a
single-letter name, and an off-by-one error makes it fail to pick up
the name, which makes the entry equivalent to
<A@example.org> <old@x.z>
without the name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bug in mailmap.c:parse_name_and_email() causes it to overlook the
single-character name in "A <user@host>" and parse it only as
"<user@host>". Demonstrate this problem.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --format=" did not honor i18n.logoutputencoding configuration
and this attempts to fix it.
* as/log-output-encoding-in-user-format:
t4205 (log-pretty-formats): avoid using `sed`
t6006 (rev-list-format): add tests for "%b" and "%s" for the case i18n.commitEncoding is not set
t4205, t6006, t7102: make functions better readable
t4205 (log-pretty-formats): revert back single quotes
t4041, t4205, t6006, t7102: use iso8859-1 rather than iso-8859-1
t4205: replace .\+ with ..* in sed commands
pretty: --format output should honor logOutputEncoding
pretty: Add failing tests: --format output should honor logOutputEncoding
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
t7102 (reset): don't hardcode SHA-1 in expected outputs
t6006 (rev-list-format): don't hardcode SHA-1 in expected outputs
If we get an input line to --batch or --batch-check that
looks like "HEAD foo bar", we will currently feed the whole
thing to get_sha1(). This means that to use --batch-check
with `rev-list --objects`, one must pre-process the input,
like:
git rev-list --objects HEAD |
cut -d' ' -f1 |
git cat-file --batch-check
Besides being more typing and slightly less efficient to
invoke `cut`, the result loses information: we no longer
know which path each object was found at.
This patch teaches cat-file to split input lines at the
first whitespace. Everything to the left of the whitespace
is considered an object name, and everything to the right is
made available as the %(reset) atom. So you can now do:
git rev-list --objects HEAD |
git cat-file --batch-check='%(objectsize) %(rest)'
to collect object sizes at particular paths.
Even if %(rest) is not used, we always do the whitespace
split (which means you can simply eliminate the `cut`
command from the first example above).
This whitespace split is backwards compatible for any
reasonable input. Object names cannot contain spaces, so any
input with spaces would have resulted in a "missing" line.
The only input hurt is if somebody really expected input of
the form "HEAD is a fine-looking ref!" to fail; it will now
parse HEAD, and make "is a fine-looking ref!" available as
%(rest).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `cat-file --batch-check` command can be used to quickly
get information about a large number of objects. However, it
provides a fixed set of information.
This patch adds an optional <format> option to --batch-check
to allow a caller to specify which items they are interested
in, and in which order to output them. This is not very
exciting for now, since we provide the same limited set that
you could already get. However, it opens the door to adding
new format items in the future without breaking backwards
compatibility (or forcing callers to pay the cost to
calculate uninteresting items).
Since the --batch option shares code with --batch-check, it
receives the same feature, though it is less likely to be of
interest there.
The format atom names are chosen to match their counterparts
in for-each-ref. Though we do not (yet) share any code with
for-each-ref's formatter, this keeps the interface as
consistent as possible, and may help later on if the
implementations are unified.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test that should have failed but didn't revealed a bug that needs
to be corrected.
* jc/t1512-fix:
get_short_sha1(): correctly disambiguate type-limited abbreviation
t1512: correct leftover constants from earlier edition
"git stash save" is not just about "saving" the local changes, but
also is to restore the working tree state to that of HEAD. If you
changed a non-directory into a directory in the local change, you
may have untracked files in that directory, which have to be killed
while doing so, unless you run it with --include-untracked. Teach
the command to detect and error out before spreading the damage.
This needed a small fix to "ls-files --killed".
* pb/stash-refuse-to-kill:
git stash: avoid data loss when "git stash save" kills a directory
treat_directory(): do not declare submodules to be untracked
"git diff" refused to even show difference when core.safecrlf is
set to true (i.e. error out) and there are offending lines in the
working tree files.
* jc/maint-diff-core-safecrlf:
diff: demote core.safecrlf=true to core.safecrlf=warn
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status/commit: make sure --porcelain is not affected by user-facing config
commit: make it work with status.short
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
Invocations of "git checkout" used internally by "git rebase" were
counted as "checkout", and affected later "git checkout -" to the
the user to an unexpected place.
* rr/rebase-checkout-reflog:
checkout: respect GIT_REFLOG_ACTION
status: do not depend on rebase reflog messages
t/t2021-checkout-last: "checkout -" should work after a rebase finishes
wt-status: remove unused field in grab_1st_switch_cbdata
t7512: test "detached from" as well
Earlier remote.pushdefault (and per-branch branch.*.pushremote)
were introduced as an additional mechanism to choose what
repository to push into when "git push" did not say it from the
command line, to help people who push to a repository that is
different from where they fetch from. This attempts to finish that
topic by teaching the default mechanism to choose branch in the
remote repository to be updated by such a push.
The 'current', 'matching' and 'nothing' modes (specified by the
push.default configuration variable) extend to such a "triangular"
workflow naturally, but 'upstream' and 'simple' have to be updated.
. 'upstream' is about pushing back to update the branch in the
remote repository that the current branch fetches from and
integrates with, it errors out in a triangular workflow.
. 'simple' is meant to help new people by avoiding mistakes, and
will be the safe default in Git 2.0.
In a non-triangular workflow, it will continue to act as a cross
between 'upstream' and 'current' in that it pushes to the current
branch's @{upstream} only when it is set to the same name as the
current branch (e.g. your 'master' forks from the 'master' from
the central repository).
In a triangular workflow, this series tentatively defines it as
the same as 'current', but we may have to tighten it to avoid
surprises in some way.
* jc/triangle-push-fixup:
t/t5528-push-default: test pushdefault workflows
t/t5528-push-default: generalize test_push_*
push: change `simple` to accommodate triangular workflows
config doc: rewrite push.default section
t/t5528-push-default: remove redundant test_config lines
In modern tests, we typically put output into a file and
compare it with test_cmp. This is nicer than just comparing
via "test", and much shorter than comparing via "test" and
printing a custom message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When coalescing ranges, sort_and_merge_range_set() unconditionally
assumes that the end of a range being folded into a preceding range
should become the end of the coalesced range. This assumption, however,
is invalid when one range is a subset of another. For example, given
ranges 1-5 and 2-3 added via range_set_append_unsafe(),
sort_and_merge_range_set() incorrectly coalesces them to range 1-3
rather than the correct union range 1-5. Fix this bug.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
