It is very easy to mistype the branch name when editing its description,
e.g.
$ git checkout -b my-topic master
: work work work
: now we are at a good point to switch working something else
$ git checkout master
: ah, let's write it down before we forget what we were doing
$ git branch --edit-description my-tpoic
The command does not notice that branch 'my-tpoic' does not exist. It is
not lost (it becomes description of an unborn my-tpoic branch), but is not
very useful. So detect such a case and error out to reduce the grief
factor from this common mistake.
This incidentally also errors out --edit-description when the HEAD points
at an unborn branch (immediately after "init", or "checkout --orphan"),
because at that point, you do not even have any commit that is part of
your history and there is no point in describing how this particular
branch is different from the branch it forked off of, which is the useful
bit of information the branch description is designed to capture.
We may want to special case the unborn case later, but that is outside the
scope of this patch to prevent more common mistakes before 1.7.9 series
gains too much widespread use.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting at release v1.7.9, if you ask to merge a signed tag, "git merge"
always creates a merge commit, even when the tag points at a commit that
happens to be a descendant of your current commit.
Unfortunately, this interacts rather badly for people who use --ff-only to
make sure that their branch is free of local developments. It used to be
possible to say:
$ git checkout -b frotz v1.7.9~30
$ git merge --ff-only v1.7.9
and expect that the resulting tip of frotz branch matches v1.7.9^0 (aka
the commit tagged as v1.7.9), but this fails with the updated Git with:
fatal: Not possible to fast-forward, aborting.
because a merge that merges v1.7.9 tag to v1.7.9~30 cannot be created by
fast forwarding.
We could teach users that now they have to do
$ git merge --ff-only v1.7.9^0
but it is far more pleasant for users if we DWIMmed this ourselves.
When an integrator pulls in a topic from a lieutenant via a signed tag,
even when the work done by the lieutenant happens to fast-forward, the
integrator wants to have a merge record, so the integrator will not be
asking for --ff-only when running "git pull" in such a case. Therefore,
this change should not regress the support for the use case v1.7.9 wanted
to add.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only place that the issue this series addresses was observed
where we read "cat-file commit" output and put it in GIT_AUTHOR_DATE
in order to replay a commit with an ancient timestamp.
With the previous patch alone, "git commit --date='20100917 +0900'"
can be misinterpreted to mean an ancient timestamp, not September in
year 2010. Guard this codepath by requring an extra '@' in front of
the raw git timestamp on the parsing side. This of course needs to
be compensated by updating get_author_ident_from_commit and the code
for "git commit --amend" to prepend '@' to the string read from the
existing commit in the GIT_AUTHOR_DATE environment variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0300 creates some helper shell scripts, and marks them with
"!/bin/sh". Even though the scripts are fairly simple, they
can fail on broken shells (specifically, Solaris /bin/sh
will persist a temporary assignment to IFS in a "read"
command).
Rather than work around the problem for Solaris /bin/sh,
using write_script will make sure we point to a known-good
shell that the user has given us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of the scripts in the test suite write small helper
shell scripts to disk. It's best if these shell scripts
start with "#!$SHELL_PATH" rather than "#!/bin/sh", because
/bin/sh on some platforms is too buggy to be used.
However, it can be cumbersome to expand $SHELL_PATH, because
the usual recipe for writing a script is:
cat >foo.sh <<-\EOF
#!/bin/sh
echo my arguments are "$@"
EOF
To expand $SHELL_PATH, you have to either interpolate the
here-doc (which would require quoting "\$@"), or split the
creation into two commands (interpolating the $SHELL_PATH
line, but not the rest of the script). Let's provide a
helper function that makes that less syntactically painful.
While we're at it, this helper can also take care of the
"chmod +x" that typically comes after the creation of such a
script, saving the caller a line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you specify a local repository on the command line of
clone, ls-remote, upload-pack, receive-pack, or upload-archive,
or in a request to git-daemon, we perform a little bit of
lookup magic, doing things like looking in working trees for
.git directories and appending ".git" for bare repos.
For clone, this magic happens in get_repo_path. For
everything else, it happens in enter_repo. In both cases,
there are some ambiguous or confusing cases that aren't
handled well, and there is one case that is not handled the
same by both methods.
This patch tries to provide (and test!) standard, sensible
lookup rules for both code paths. The intended changes are:
1. When looking up "foo", we have always preferred
a working tree "foo" (containing "foo/.git" over the
bare "foo.git". But we did not prefer a bare "foo" over
"foo.git". With this patch, we do so.
2. We would select directories that existed but didn't
actually look like git repositories. With this patch,
we make sure a selected directory looks like a git
repo. Not only is this more sensible in general, but it
will help anybody who is negatively affected by change
(1) negatively (e.g., if they had "foo.git" next to its
separate work tree "foo", and expect to keep finding
"foo.git" when they reference "foo").
3. The enter_repo code path would, given "foo", look for
"foo.git/.git" (i.e., do the ".git" append magic even
for a repo with working tree). The clone code path did
not; with this patch, they now behave the same.
In the unlikely case of a working tree overlaying a bare
repo (i.e., a ".git" directory _inside_ a bare repo), we
continue to treat it as a working tree (prefering the
"inner" .git over the bare repo). This is mainly because the
combination seems nonsensical, and I'd rather stick with
existing behavior on the off chance that somebody is relying
on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no way for users to tell git-grep that a
particular path is or is not a binary file; instead, grep
always relies on its auto-detection (or the user specifying
"-a" to treat all binary-looking files like text).
This patch teaches git-grep to use the same attribute lookup
that is used by git-diff. We could add a new "grep" flag,
but that is unnecessarily complex and unlikely to be useful.
Despite the name, the "-diff" attribute (or "diff=foo" and
the associated diff.foo.binary config option) are really
about describing the contents of the path. It's simply
historical that diff was the only thing that cared about
these attributes in the past.
And if this simple approach turns out to be insufficient, we
still have a backwards-compatible path forward: we can add a
separate "grep" attribute, and fall back to respecting
"diff" if it is unset.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment was introduced in b5d97e6 (pack-objects: run rev-list
equivalent internally. - 2006-09-04), stating that
git pack-objects [options] base-name <refs...>
is acceptable and refs should be passed into rev-list. But that's not
true. All arguments after base-name are ignored.
Remove the comment and reject this syntax (i.e. no more arguments after
base name)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/clone-detached:
clone: fix up delay cloning conditions
push: do not let configured foreign-vcs permanently clobbered
clone: print advice on checking out detached HEAD
clone: allow --branch to take a tag
clone: refuse to clone if --branch points to bogus ref
clone: --branch=<branch> always means refs/heads/<branch>
clone: delay cloning until after remote HEAD checking
clone: factor out remote ref writing
clone: factor out HEAD update code
clone: factor out checkout code
clone: write detached HEAD in bare repositories
t5601: add missing && cascade
* va/git-p4-branch:
t9801: do not overuse test_must_fail
git-p4: Change p4 command invocation
git-p4: Add test case for complex branch import
git-p4: Search for parent commit on branch creation
* ld/git-p4-branches-and-labels:
git-p4: label import fails with multiple labels at the same changelist
git-p4: add test for p4 labels
git-p4: importing labels should cope with missing owner
git-p4: cope with labels with empty descriptions
git-p4: handle p4 branches and labels containing shell chars
When asking for a tag to be pulled, disambiguate by leaving tags/ prefix
in front of the name of the tag. E.g.
... in the git repository at:
git://example.com/git/git.git/ tags/v1.2.3
for you to fetch changes up to 123456...
This way, older versions of "git pull" can be used to respond to such a
request more easily, as "git pull $URL v1.2.3" did not DWIM to fetch
v1.2.3 tag in older versions. Also this makes it clearer for humans that
the pull request is made for a tag and he should anticipate a signed one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/p4-view-updates:
git-p4: add tests demonstrating spec overlay ambiguities
git-p4: adjust test to adhere to stricter useClientSpec
git-p4: clarify comment
git-p4: fix verbose comment typo
git-p4: only a single ... wildcard is supported
* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
This simplifies svn-fe a great deal and fulfills a longstanding wish:
support for dumps with deltas in them, and incremental imports.
The cost is that commandline usage of the svn-fe tool becomes a little
more complicated since it no longer keeps state itself but instead reads
blobs back from fast-import in order to copy them between revisions and
apply deltas to them.
Also removes a couple of custom data structures and replaces them with
strbufs like other parts of Git.
* 'svn-fe' of git://repo.or.cz/git/jrn: (32 commits)
vcs-svn: reset first_commit_done in fast_export_init
vcs-svn: do not initialize report_buffer twice
vcs-svn: avoid hangs from corrupt deltas
vcs-svn: guard against overflow when computing preimage length
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: implement text-delta handling
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
vcs-svn: make buffer_read_binary API more convenient
vcs-svn: learn to maintain a sliding view of a file
Makefile: list one vcs-svn/xdiff object or header per line
vcs-svn: avoid using ls command twice
...
Conflicts:
Makefile
contrib/svn-fe/svn-fe.txt
test_must_fail is to make sure a program we can potentially break during
the course of updating git itself exits with a non-zero status in a clean
and controlled way.
When we expect a non-zero exit status from the commands we use from the
underlying platform in tests, e.g. making sure a string "error: " does not
appear in the output by running "grep 'error: '", just use "! grep" for
readability. It is not like we will try to update Git and suddenly 'grep'
we use from the system starts segfaulting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if branches created from old changelists are correctly imported.
Also included some updates to simple branch test so that both are
coherent in respect to each other.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there.
When the same submodule is added on a branch where it wasn't present so
far (it is not found in the .gitmodules file), the name is not initialized
from the path as it should. This leads to a wrong path entered in the
gitfile when the .git/modules/<name> directory is found, as this happily
uses the - now empty - name. It then always points only a single directory
up, even if we have a path deeper in the directory hierarchy.
Fix that by initializing the name of the submodule early in module_clone()
if module_name() returned an empty name and add a test to catch that bug.
Reported-by: Jehan Bing <jehan@orb.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, a cleanly resolved merge was committed by "git merge" using
the auto-generated merge commit log message without invoking the editor.
After 5 years of use in the field, it turns out that people perform too
many unjustified merges of the upstream history into their topic branches.
These merges are not just useless, but they are often not explained well,
and making the end result unreadable when it gets time for merging their
history back to their upstream.
Earlier we added the "--edit" option to the command, so that people can
edit the log message to explain and justify their merge commits. Let's
take it one step further and spawn the editor by default when we are in an
interactive session (i.e. the standard input and the standard output are
pointing at the same tty device).
There may be existing scripts that leave the standard input and the
standard output of the "git merge" connected to whatever environment the
scripts were started, and such invocation might trigger the above
"interactive session" heuristics. GIT_MERGE_AUTOEDIT environment variable
can be set to "no" at the beginning of such scripts to use the historical
behaviour while the script runs.
Note that this backward compatibility is meant only for scripts, and we
deliberately do *not* support "merge.edit = yes/no/auto" configuration
option to allow people to keep the historical behaviour.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some merge tools cannot cope when $LOCAL, $BASE, or $REMOTE are missing.
$BASE can be missing when two branches independently add the same
filename.
Provide an empty file to make these tools happy.
When a delete/modify conflict occurs, $LOCAL and $REMOTE can also be
missing. We have special case code to handle such case so this change
may not affect that codepath, but try to be consistent and create an
empty file for them anyway.
Reported-by: Jason Wenger <jcwenger@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In threaded mode, git-grep emits file breaks (enabled with context, -W
and --break) into the accumulation buffers even if they are not
required. The output collection thread then uses skip_first_line to
skip the first such line in the output, which would otherwise be at
the very top.
This is wrong when the user also specified -l/-L/-c, in which case
every line is relevant. While arguably giving these options together
doesn't make any sense, git-grep has always quietly accepted it. So
do not skip anything in these cases.
Signed-off-by: Albert Yale <surfingalbert@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting from GNU Make 3.82 $(wildcard ...) no longer sorts the result
(from NEWS):
* WARNING: Backward-incompatibility!
Wildcards were not documented as returning sorted values, but the results
have been sorted up until this release.. If your makefiles require sorted
results from wildcard expansions, use the $(sort ...) function to request
it explicitly.
2a59dc32aa
I usually watch test progress visually, and if tests are sorted, even
with make -j4 they go more or less incrementally by their t number. On
the other side, without sorting, tests are executed in seemingly random
order even for -j1. Let's please maintain sane tests order for perceived
prettyness.
Another note is that in GNU Make sort also works as uniq, so after sort
being removed, we might expect e.g. $(wildcard *.sh a.*) to produce
duplicates for e.g. "a.sh". From this point of view, adding sort could
be seen as hardening t/Makefile from accidentally introduced dups.
It turned out that prevous releases of GNU Make did not perform full
sort in $(wildcard), only sorting results for each pattern, that's why
explicit sort-as-uniq is relevant even for older makes.
Signed-off-by: Kirill Smelkov <kirr@navytux.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 has an array of changelists with one label per changelist.
But you can have multiple labels on a single changelist and so this
code fails.
Add a test case demonstrating the problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add basic test of p4 label import. Checks label import and
import with shell metachars; labels with different length
descriptions.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't use shell expansion when detecting branches, as it will
fail if the branch name contains a shell metachar. Similarly
for labels.
Add additional test for branches with shell metachars.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The protocol between transport-helper.c and remote-curl requires
remote-curl to always print a blank line after the push command
has run. If the blank line is ommitted, transport-helper kills its
container process (the git push the user started) with exit(128)
and no message indicating a problem, assuming the helper already
printed reasonable error text to the console.
However if the remote rejects all branches with "ng" commands in the
report-status reply, send-pack terminates with non-zero status, and
in turn remote-curl exited with non-zero status before outputting
the blank line after the helper status printed by send-pack. No
error messages reach the user.
This caused users to see the following from git push over HTTP
when the remote side's update hook rejected the branch:
$ git push http://... master
Counting objects: 4, done.
Delta compression using up to 6 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 301 bytes, done.
Total 3 (delta 0), reused 0 (delta 0)
$
Always print a blank line after the send-pack process terminates,
ensuring the helper status report (if it was output) will be
correctly parsed by the calling transport-helper.c. This ensures
the helper doesn't abort before the status report can be shown to
the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a topic branch workflow, you often want to find the latest commit that
merged a side branch that touched a particular area of the system, so that
a new topic branch to work on that area can be forked from that commit.
For example, I wanted to find an appropriate fork-point to queue Luke's
changes related to git-p4 in contrib/fast-import/.
"git log --first-parent" traverses the first-parent chain, and "-m --stat"
shows the list of paths touched by commits including merge commits. We
could ask the question this way:
# What is the latest commit that touched that path?
$ git log --first-parent --oneline -m --stat master |
sed -e '/^ contrib\/fast-import\/git-p4 /q' | tail
The above finds that 8cbfc11 (Merge branch 'pw/p4-view-updates',
2012-01-06) was such a commit.
But a more natural way to spell this question is this:
$ git log --first-parent --oneline -m --stat -1 master -- \
contrib/fast-import/git-p4
Unfortunately, this does not work. It finds ecb7cf9 (git-p4: rewrite view
handling, 2012-01-02). This commit is a part of the merged topic branch
and is _not_ on the first-parent path from the 'master':
$ git show-branch 8cbfc11ecb7cf9
! [8cbfc11] Merge branch 'pw/p4-view-updates'
! [ecb7cf9] git-p4: rewrite view handling
--
- [8cbfc11] Merge branch 'pw/p4-view-updates'
+ [8cbfc11^2] git-p4: view spec documentation
++ [ecb7cf9] git-p4: rewrite view handling
The problem is caused by the merge simplification logic when it inspects
the merge commit 8cbfc11. In this case, the history leading to the tip of
'master' did not touch git-p4 since 'pw/p4-view-updates' topic forked, and
the result of the merge is simply a copy from the tip of the topic branch
in the view limited by the given pathspec. The merge simplification logic
discards the history on the mainline side of the merge, and pretends as if
the sole parent of the merge is its second parent, i.e. the tip of the
topic. While this simplification is correct in the general case, it is at
least surprising if not outright wrong when the user explicitly asked to
show the first-parent history.
Here is an attempt to fix this issue, by not allowing us to compare the
merge result with anything but the first parent when --first-parent is in
effect, to avoid the history traversal veering off to the side branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pathspec structure has a few bits of data to drive various operation
modes after we unified the pathspec matching logic in various codepaths.
For example, max_depth field is there so that "git grep" can limit the
output for files found in limited depth of tree traversal. Also in order
to show just the surface level differences in "git diff-tree", recursive
field stops us from descending into deeper level of the tree structure
when it is set to false, and this also affects pathspec matching when
we have wildcards in the pathspec.
The diff-index has always wanted the recursive behaviour, and wanted to
match pathspecs without any depth limit. But we forgot to do so when we
updated tree_entry_interesting() logic to unify the pathspec matching
logic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 781f76b15 (test-lib: redirect stdin of tests) you can't simply put a
"bash &&" into a test for debugging purposes anymore. Instead you'll have
to use "bash <&6 >&3 2>&4".
As that invocation is not that easy to remember add the test_pause
convenience function. It invokes "$SHELL_PATH" to provide a sane shell
for the user.
This function also checks if the -v flag is given and will error out if
that is not the case instead of letting the test hang until ^D is pressed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that users make a typo in the branch name. Stop and let
users recheck. Falling back to remote's HEAD is not documented any
way.
Except when using remote helper, the pack has not been transferred at
this stage yet so we don't waste much bandwidth.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't write, HEAD is still at refs/heads/master as initialized
by init-db, which may or may not match remote's HEAD.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for the -b mode, where [PATCH] is dropped but [foo] is not,
silently ate all spaces after the ].
Fix this by keeping the next isspace() character, if there is any.
Being more thorough is pointless, as the later cleanup_space() call
will normalize any sequence of whitespace to a single ' '.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am could pass -k to mailinfo, but not -b. Introduce an option
that does so. We change the meaning of the 'keep' state file, but are
careful not to cause a problem unless you downgrade in the middle of
an 'am' run.
This uncovers a bug in mailinfo -b, hence the failing test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pathspec structure has a few bits of data to drive various operation
modes after we unified the pathspec matching logic in various codepaths.
For example, max_depth field is there so that "git grep" can limit the
output for files found in limited depth of tree traversal. Also in order
to show just the surface level differences in "git diff-tree", recursive
field stops us from descending into deeper level of the tree structure
when it is set to false, and this also affects pathspec matching when
we have wildcards in the pathspec.
The diff-index has always wanted the recursive behaviour, and wanted to
match pathspecs without any depth limit. But we forgot to do so when we
updated tree_entry_interesting() logic to unify the pathspec matching
logic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word-diff logic accumulates + and - lines until another line type
appears (normally [ @\]), at which point it generates the word diff.
This is usually correct, but it breaks when the preimage does not have
a newline at EOF:
$ printf "%s" "a a a" >a
$ printf "%s\n" "a ab a" >b
$ git diff --no-index --word-diff a b
diff --git 1/a 2/b
index 9f68e94..6a7c02f 100644
--- 1/a
+++ 2/b
@@ -1 +1 @@
[-a a a-]
No newline at end of file
{+a ab a+}
Because of the order of the lines in a unified diff
@@ -1 +1 @@
-a a a
\ No newline at end of file
+a ab a
the '\' line flushed the buffers, and the - and + lines were never
matched with each other.
A proper fix would defer such markers until the end of the hunk.
However, word-diff is inherently whitespace-ignoring, so as a cheap
fix simply ignore the marker (and hide it from the output).
We use a prefix match for '\ ' to parallel the logic in
apply.c:parse_fragment(). We currently do not localize this string
(just accept other variants of it in git-apply), but this should be
future-proof.
Noticed-by: Ivan Shirokoff <shirokoff@yandex-team.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For details, see the commit message of 4114156ae9. Note that while using
$PWD as part of GIT_DIR is not required here, it does no harm and it is
more consistent. In addition, on MSYS using an environment variable should
be slightly faster than spawning an external executable.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce new tests that look more closely at overlay situations
when there are conflicting files. Five of these are broken.
Document the brokenness.
This is a fundamental problem with how git-p4 only "borrows" a
client spec. At some sync operation, a new change can contain
a file which is already in the repo or explicitly deleted through
another mapping. To sort this out would involve listing all the
files in the client spec to find one with a higher priority.
While this is not too hard for the initial import, subsequent
sync operations would be very costly.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test relied on what now is seen as broken behavior
in --use-client-spec. Change it to make sure it works
according to the new behavior as described in
ecb7cf9 (git-p4: rewrite view handling, 2012-01-02) and
c700b68 (git-p4: test client view handling, 2012-01-02).
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Catch the case where a ... exists at the end, and also elsehwere.
Reported-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit message to avoid commit's aborting due to the lack of
commit message, not because there are INTENT_TO_ADD entries in index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we prepare the attribute stack for a lookup on a path,
we start with the cached stack from the previous lookup
(because it is common to do several lookups in the same
directory hierarchy). So the first thing we must do in
preparing the stack is to pop any entries that point to
directories we are no longer interested in.
For example, if our stack contains gitattributes for:
foo/bar/baz
foo/bar
foo
but we want to do a lookup in "foo/bar/bleep", then we want
to pop the top element, but retain the others.
To do this we walk down the stack from the top, popping
elements that do not match our lookup directory. However,
the test do this simply checked strncmp, meaning we would
mistake "foo/bar/baz" as a leading directory of
"foo/bar/baz_plus". We must also check that the character
after our match is '/', meaning we matched the whole path
component.
There are two special cases to consider:
1. The top of our attr stack has the empty path. So we
must not check for '/', but rather special-case the
empty path, which always matches.
2. Typically when matching paths in this way, you would
also need to check for a full string match (i.e., the
character after is '\0'). We don't need to do so in
this case, though, because our path string is actually
just the directory component of the path to a file
(i.e., we know that it terminates with "/", because the
filename comes after that).
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In test 'blame --textconv with local changes' of t8006-blame-textconv,
using /usr/xpg4/bin/sed (as set by SANE_TOOL_PATH), an additional
newline was added to the output from the 'helper' script.
This was noted by sed with a message such as:
sed: Missing newline at end of file zero.bin.
Sed then exits with status 2 causing the helper script to also exit
with status 2.
In turn, this was triggering a fatal error from git blame:
fatal: unable to read files to diff
To work around this difference in sed behaviour, use perl -p instead
of sed -e as it exits cleanly and does not insert the additional
newline.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When gitweb URL does not provide action explicitly, e.g.
http://git.example.org/repo.git/branch
dispatch() tries to guess action (view to be used) based on remaining
parameters. Among others it is based on the type of requested object,
which gave problems when asking for non-existent branch or file (for
example misspelt name).
Now undefined $action from dispatch() should not result in problems.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In start_daemon, git-daemon is started as a background process. In
theory, the tests may try to connect before the daemon had a chance
to open a listening socket. Avoid this race condition by waiting
for it to output "Ready to rumble". Any other output is considered
an error and the test is aborted.
Should git-daemon produce no output at all, lib-git-daemon would
block forever. This could be fixed by introducing a timeout. On
the other hand, we have no timeout for other git commands which
could suffer from the same problem. Since such a mechanism adds
some complexity, I have decided against it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The semantics of the git daemon tests are similar to the http transport
tests. In fact, they are only a slightly modified copy of t5550, plus the
newly added remote error tests.
All git-daemon tests will be skipped unless the environment variable
GIT_TEST_GIT_DAEMON is set.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lib-terminal.sh runs a test and thus increases the test count, but the
output is lost so that TAP produces a "no plan found error".
Move the lib-terminal call after the lib-httpd and make TAP happy
(though still leave me clueless).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --single-branch is given, only one branch, either HEAD or one
specified by --branch, will be fetched. Also only tags that point to
the downloaded history are fetched.
This helps most in shallow clones, where it can reduce the download to
minimum and that is why it is enabled by default when --depth is given.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Conflicts:
builtin/commit-tree.c
builtin/commit.c
builtin/merge.c
notes-cache.c
pretty.c
Normally it doesn't matter if we show the pre-image or th post-image
for the common parts of a diff because they are the same. If
white-space changes are ignored they can differ, though. The
new text after applying the diff is more interesting in that case,
so show that instead of the old contents.
Note: GNU diff shows the pre-image.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any existing commit signature was made against the contents of the old
commit, including its committer date that is about to change, and will
become invalid by amending it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequently we assume that there is only one pack. Currently this is
true only by accident. Pass '-a -d' to repack in order to guarantee that
assumption to hold true.
The prune-packed command is now redundant since repack -d already calls
it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FETCH_HEAD refname is supposed to refer to the ref that was fetched
and should be merged. However all fetched refs are written to
.git/FETCH_HEAD in an arbitrary order, and resolve_ref_unsafe simply
takes the first ref as the FETCH_HEAD, which is often the wrong one,
when other branches were also fetched.
The solution is to write the for-merge ref(s) to FETCH_HEAD first.
Then, unless --append is used, the FETCH_HEAD refname behaves as intended.
If the user uses --append, they presumably are doing so in order to
preserve the old FETCH_HEAD.
While we are at it, update an old example in the read-tree documentation
that implied that each entry in FETCH_HEAD only has the object name, which
is not true for quite a while.
[jc: adjusted tests]
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code was not very complete or robust. Redo it.
This new code should be useful for a few possible additions
in the future:
- support for * and %%n wildcards
- allowing ... inside paths
- representing branch specs (not just client specs)
- tracking changes to views
Mark the remaining 12 tests in t9809 as fixed.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce client views can map individual files,
mapping one //depot file path to one //client file path.
These mappings contain no meta/masking characters.
This patch add support for these file maps to
the currently supported '...' view mappings.
[pw: one test now suceeds]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct view sorting to support the Perforce order,
where client views are ordered and later views
override earlier view mappings.
[pw: one test now succeeds]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change re method in test for unsupported Client View types
(containing %% or *) anywhere in the string rather than
at the begining.
[pw: two tests now succeed]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test many aspects of processing p4 client views with the
git-p4 option --use-client-spec. 16 out of 22 tests are
currently broken.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/p4-docs-and-tests:
git-p4: document and test submit options
git-p4: test and document --use-client-spec
git-p4: test --keep-path
git-p4: test --max-changes
git-p4: document and test --import-local
git-p4: honor --changesfile option and test
git-p4: document and test clone --branch
git-p4: test cloning with two dirs, clarify doc
git-p4: clone does not use --git-dir
git-p4: introduce asciidoc documentation
rename git-p4 tests
* maint:
docs: describe behavior of relative submodule URLs
fix hang in git fetch if pointed at a 0 length bundle
Documentation: read-tree --prefix works with existing subtrees
Add MYMETA.json to perl/.gitignore
git-repo if interupted at the exact wrong time will generate zero
length bundles- literal empty files. git-repo is wrong here, but
git fetch shouldn't effectively spin loop if pointed at a zero
length bundle.
Signed-off-by: Brian Harring <ferringb@chromium.org>
Helped-by: Johannes Sixt
Helped-by: Nguyen Thai Ngoc Duy
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a plain "git stash" (without --patch), git-diff would fail
with "fatal: ambiguous argument 'HEAD': both revision and filename". The
output was piped into git-update-index, masking the failed exit status.
The output is now sent to a temporary file (which is cleaned up by
existing code), and the exit status is checked. The "HEAD" arg to the
git-diff invocation has been disambiguated too, of course.
In patch mode, "git stash -p" would fail harmlessly, leaving the working
dir untouched. Interactive adding is fine, but the resulting tree was
diffed with an ambiguous 'HEAD' argument.
Use >foo (no space) when redirecting output.
In t3904, checks and operations on each file are in the order they'll
appear when interactively staging.
In t3905, fix a bug in "stash save --include-untracked -q is quiet": The
redirected stdout file was considered untracked, and so was removed from
the working directory. Use test path helper functions where appropriate.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-m-twoway:
t/t2023-checkout-m.sh: fix use of test_must_fail
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
