We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
Without this patch, this test would start failing when the new behavior is
introduced.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are formalizing a requirement that any remote-tracking branch to be used
as an upstream (i.e. as an argument to --track), _must_ "belong" to a
configured remote by being matched by the "dst" side of a fetch refspec.
This patch encodes the new expected behavior of this test, and marks the
test with "test_expect_failure" in anticipation of a following patch to
introduce the new behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DWIM mode of checkout allows you to run "git checkout foo" when there
is no existing local ref or path called "foo", and there is exactly _one_
remote with a remote-tracking branch called "foo". Git will automatically
create a new local branch called "foo" using the remote-tracking "foo" as
its starting point and configured upstream.
For example, consider the following unconventional (but perfectly valid)
remote setup:
[remote "origin"]
fetch = refs/heads/*:refs/remotes/origin/*
[remote "frotz"]
fetch = refs/heads/*:refs/remotes/frotz/nitfol/*
Case 1: Assume both "origin" and "frotz" have remote-tracking branches called
"foo", at "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo"
respectively. In this case "git checkout foo" should fail, because there is
more than one remote with a "foo" branch.
Case 2: Assume only "frotz" have a remote-tracking branch called "foo". In
this case "git checkout foo" should succeed, and create a local branch "foo"
from "refs/remotes/frotz/nitfol/foo", using remote branch "foo" from "frotz"
as its upstream.
The current code hardcodes the assumption that all remote-tracking branches
must match the "refs/remotes/$remote/*" pattern (which is true for remotes
with "conventional" refspecs, but not true for the "frotz" remote above).
When running "git checkout foo", the current code looks for exactly one ref
matching "refs/remotes/*/foo", hence in the above example, it fails to find
"refs/remotes/frotz/nitfol/foo", which causes it to fail both case #1 and #2.
The better way to handle the above example is to actually study the fetch
refspecs to deduce the candidate remote-tracking branches for "foo"; i.e.
assume "foo" is a remote branch being fetched, and then map "refs/heads/foo"
through the refspecs in order to get the corresponding remote-tracking
branches "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo".
Finally we check which of these happens to exist in the local repo, and
if there is exactly one, we have an unambiguous match for "git checkout foo",
and may proceed.
This fixes most of the failing tests introduced in the previous patch.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git checkout foo" to DWIM the creation of local "foo" from some
existing upstream "foo", we assume conventional refspecs as created by "git
clone" or "git remote add", and fail to work correctly if the current
refspecs do not follow the conventional "refs/remotes/$remote/*" pattern.
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DWIM mode of checkout allows you to run "git checkout foo" when there is
no existing local ref or path called "foo", and there is exactly one remote
with a remote-tracking branch called "foo". Git will then automatically
create a new local branch called "foo" using the remote-tracking "foo" as
its starting point and configured upstream.
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix longstanding issues with the test harness when used with --root=<there>
option.
* jk/test-trash:
t/test-lib.sh: drop "$test" variable
t/test-lib.sh: fix TRASH_DIRECTORY handling
The resolution of some corner cases by "git merge-tree" were
inconsistent between top-of-the-tree and in a subdirectory.
* jk/merge-tree-added-identically:
merge-tree: don't print entries that match "local"
Allow smart-capable HTTP servers to be restricted via the
GIT_NAMESPACE mechanism when talking with commit-walker clients
(they already do so when talking with smart HTTP clients).
* jk/http-dumb-namespaces:
http-backend: respect GIT_NAMESPACE with dumb clients
Implementations of "tar" of BSD descend have found to have trouble
with reading an otherwise empty tar archive with pax headers and
causes an unnecessary test failure.
* rs/empty-archive:
t5004: fix issue with empty archive test and bsdtar
Allows format-patch --cover-letter to be configurable; the most
notable is the "auto" mode to create cover-letter only for multi
patch series.
* fc/send-email-annotate:
rebase-am: explicitly disable cover-letter
format-patch: trivial cleanups
format-patch: add format.coverLetter configuration variable
log: update to OPT_BOOL
format-patch: refactor branch name calculation
format-patch: improve head calculation for cover-letter
send-email: make annotate configurable
Adjust our tests for upcoming migration of the default value for the
"push.default" configuration variable to "simple" from "mixed".
* 'jc/push-2.0-default-to-simple' (early part):
t5570: do not assume the "matching" push is the default
t5551: do not assume the "matching" push is the default
t5550: do not assume the "matching" push is the default
t9401: do not assume the "matching" push is the default
t9400: do not assume the "matching" push is the default
t7406: do not assume the "matching" push is the default
t5531: do not assume the "matching" push is the default
t5519: do not assume the "matching" push is the default
t5517: do not assume the "matching" push is the default
t5516: do not assume the "matching" push is the default
t5505: do not assume the "matching" push is the default
t5404: do not assume the "matching" push is the default
In addition to a user visible change to offer more options to cherry-pick,
generally cleans up and simplifies the code.
* fc/completion:
completion: small optimization
completion: inline __gitcomp_1 to its sole callsite
completion: get rid of compgen
completion: add __gitcomp_nl tests
completion: add new __gitcompadd helper
completion: get rid of empty COMPREPLY assignments
completion: trivial test improvement
completion: add more cherry-pick options
MSYS bash interprets the slash in the argument core.commentchar="/"
as root directory and mangles it into a Windows style path. Use a
different core.commentchar to dodge the issue.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new core.commentchar configuration was not applied to a few
places.
* rt/commentchar-fmt-merge-msg:
fmt-merge-msg: use core.commentchar in tag signatures completely
fmt-merge-msg: respect core.commentchar in people credits
"git bundle" did not like a bundle created using a commit without
any message as its one of the prerequistes.
* lf/bundle-with-tip-wo-message:
bundle: Accept prerequisites without commit messages
Closing (not redirecting to /dev/null) the standard error stream is
not a very smart thing to do. Later open may return file
descriptor #2 for unrelated purpose, and error reporting code may
write into them.
* tr/perl-keep-stderr-open:
t9700: do not close STDERR
perl: redirect stderr to /dev/null instead of closing
The $test variable is used as an interim buffer for
constructing $TRASH_DIRECTORY, and is almost compatible with
it (the exception being that $test has not been converted to
an absolute path). Let's get rid of it entirely so that
later code does not accidentally use it, thinking the two
are interchangeable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the location of $TRASH_DIRECTORY is adjusted by
$TEST_OUTPUT_DIRECTORY, we go on to use the $test variable to make the
trash directory and cd into it. This means that when
$TEST_OUTPUT_DIRECTORY is not "." and an absolute --root has not been
specified, we do not remove the trash directory once the tests are
complete (remove_trash is set to $TRASH_DIRECTORY).
Fix this by always referring to the trash directory as $TRASH_DIRECTORY.
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality we use from compgen is not much, we can do the same
manually, with drastic improvements in speed, especially when dealing
with only a few words.
This patch also has the sideffect that brekage reported by Jeroen Meijer
and SZEDER Gábor gets fixed because we no longer expand the resulting
words.
Here are some numbers filtering N amount of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.000s
== 100 ==
original: 0.003s
new: 0.002s
== 1000 ==
original: 0.012s
new: 0.011s
== 10000 ==
original: 0.056s
new: 0.066s
== 100000 ==
original: 2.669s
new: 0.622s
If the results are not narrowed:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.001s
== 100 ==
original: 0.004s
new: 0.004s
== 1000 ==
original: 0.020s
new: 0.015s
== 10000 ==
original: 0.101s
new: 0.355s
== 100000 ==
original: 2.850s
new: 31.941s
So, unless 'git checkout <tab>' usually gives you more than 10000
results, you'll get an improvement :)
Other possible solutions perform better after 1000 words, but worst if
less than that:
COMPREPLY=($(awk -v cur="$3" -v pre="$2" -v suf="$4"
'$0 ~ cur { print pre$0suf }' <<< "$1" ))
COMPREPLY=($(printf -- "$2%s$4\n" $1 | grep "^$2$3"))
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of passing a dummy "", let's check if the last character is a
space, and then move the _cword accordingly.
Apparently we were passing "" all the way to compgen, which fortunately
expanded it to nothing.
Lets do the right thing though.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Typo fix: replacing it's -> its
t: make PIPE a standard test prerequisite
archive: clarify explanation of --worktree-attributes
t/README: --immediate skips cleanup commands for failed tests
Attempts to minimize "diff -c/--cc" output by coalescing the same
lines removed from the parents better, but with an O(n^2)
complexity.
* ap/combine-diff-coalesce-lost:
combine-diff: coalesce lost lines optimally
"git log -S/-G" started paying attention to textconv filter, but
there was no way to disable this. Make it honor --no-textconv
option.
* sr/log-SG-no-textconv:
diffcore-pickaxe: unify code for log -S/-G
diffcore-pickaxe: fix leaks in "log -S<block>" and "log -G<pattern>"
diffcore-pickaxe: port optimization from has_changes() to diff_grep()
diffcore-pickaxe: respect --no-textconv
diffcore-pickaxe: remove fill_one()
diffcore-pickaxe: remove unnecessary call to get_textconv()
A few bugfixes to "git rerere" working on corner case merge
conflicts.
* js/rerere-forget-protect-against-NUL:
rerere forget: do not segfault if not all stages are present
rerere forget: grok files containing NUL
The 'PIPE' test prerequisite was already defined identically by t9010
and t9300, therefore it makes sense to make it a predefined
prerequisite.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the git directory is accessed through a symlink like
ln -s /tmp/git /tmp/git-symlink
cd /tmp/git-symlink/t
make -C .. && ./t9903-bash-prompt.sh
$TRASH_DIRECTORY is /tmp/git-symlink/t/trash directory.t9903-bash-prompt
and $(pwd -P) is /tmp/git/t/trash directory.t9903-bash-prompt.
When __gitdir looks up the path through 'git rev-parse --git-dir', it
will return paths similar to $(pwd -P). This behavior is already tested in
t9903 'gitdir - resulting path avoids symlinks'.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a single argument was a non-commit, the error message used to be:
fatal: BUG: expected exactly one commit from walk
For multiple arguments, when none of the arguments was a commit, the error was:
fatal: empty commit set passed
Finally, when some of the arguments were non-commits, we ignored those
arguments. Fix this bug and make sure all arguments are commits, and
for the first non-commit, error out with:
fatal: <name>: Can't cherry-pick a <type>
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bsdtar, which is the default tar on Mac OS X, handles empty archives
just fine but reports archives containing only a pax extended header
comment as damaged. Work around the issue by explicitly generating
the archive for the tree and not the commit, which causes git archive
to omit the commit hash comment record from the tar file.
Reported-by: BJ Hargrave <bj@bjhargrave.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Filter the list of refs returned via the dumb HTTP protocol according
to the active namespace, consistent with other clients of the
upload-pack service.
Signed-off-by: John Koleszar <jkoleszar@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Bracey reports that the change regresses a case shown in the
user manual.
Trading one fix with another breakage is not worth it. Just keep
the test to document the existing breakage, and revert the change
for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation says:
the output from the command omits entries that match the
<branch1> tree.
But currently "added in branch1" and "removed in branch1" (both while
unchanged in branch2) do print output. Change this so that the
behaviour matches the documentation.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While explicitly stating that the commit message in a prerequisite
line is optional, we required all lines with 40 or more characters
to contain a space after the object name, bailing out if a line
consisted of an object name only. This was to allow bundling a
history to a commit without an message, but the code forgot that it
already called rtrim() to remove that whitespace.
As a workaround, only check for SP when the line has more than 40
characters.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of test cases and a corner case bugfix for "git rm".
* jk/rm-removed-paths:
t3600: document failure of rm across symbolic links
t3600: test behavior of reverse-d/f conflict
rm: do not complain about d/f conflicts during deletion
Support "pull from one place, push to another place" workflow
better by introducing remote.pushdefault (overrides the "origin"
thing) and branch.*.pushremote (overrides the branch.*.remote).
* rr/triangle:
remote.c: introduce branch.<name>.pushremote
remote.c: introduce remote.pushdefault
remote.c: introduce a way to have different remotes for fetch/push
t5516 (fetch-push): drop implicit arguments from helper functions
t5516 (fetch-push): update test description
remote.c: simplify a bit of code using git_config_string()
"git status" learned to report that you are in the middle of a
revert session, just like it does for a cherry-pick and a bisect
session.
* mm/status-during-revert:
status: show commit sha1 in "You are currently reverting" message
status: show 'revert' state and status hint
The handing by "git branch --set-upstream-to" against various forms
of errorneous inputs were suboptimal.
* jk/set-upstream-error-cases:
branch: give advice when tracking start-point is missing
branch: mention start_name in set-upstream error messages
branch: improve error message for missing --set-upstream-to ref
branch: factor out "upstream is not a branch" error messages
t3200: test --set-upstream-to with bogus refs
When used with "-d temporary-directory" option, "git filter-branch"
failed to come back to the original working tree to perform the
final clean-up procedure.
* jk/filter-branch-come-back-to-original:
filter-branch: return to original dir after filtering
Also, add a new option: 'auto', so if there's more than one patch, the
cover letter is generated, otherwise it's not.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we do it after the revision traversal we can be sure that this is
indeed a commit that will be processed (i.e. not a merge) and it's the
top most one (thus removing the NEEDSWORK comment, at least we show the
same as 'git diff --stat' output that appears in the cover-letter).
While we are at it, since we know there's nothing to generate, exit
sooner in all cases, like --cover-letter currently does.
Also, if there's nothing to generate and cover-letter is specified, a
different code-path might be triggered that is not currently covered in
the test-case, so add a test for it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit eff80a9 (Allow custom "comment char") introduced a custom
comment character for commit messages but forgot to use it in
people credits which can be a part of a commit message.
With this commit, the custom comment character is also used
in people credits.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
