Apply "Subproject commit HEX" changes produced by git-diff.
As usual in the current git, only the superproject itself is actually
modified (possibly creating empty directories for new submodules).
Any checked-out submodule is left untouched and is not required to
be up-to-date.
With clean-ups from Junio C Hamano.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option git-log prints log message size
just before the corresponding message.
Porcelain tools could use this to speedup parsing
of git-log output.
Note that size refers to log message only. If also
patch content is shown its size is not included.
In case it is not possible to know the size upfront
size value is set to zero.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If cmd-list.made has been created by a previous run as root, output
redirection to it will fail. So remove it before regeneration.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
These patches use docbook2x in order to create an info version of the
git user manual. No existing Makefile targets (including "all") are
touched, so you need to explicitly say
make info
sudo make install-info
to get git.info created and installed. If the info target directory
does not already contain a "dir" file, no directory entry is created.
This facilitates $(DESTDIR)-based installations. The same could be
achieved with
sudo make INSTALL_INFO=: install-info
explicitly.
perl is used for patching up sub-par file and directory information in
the Texinfo file. It would be cleaner to place the respective info
straight into user-manual.txt or the conversion configurations, but I
find myself unable to find out how to do this with Asciidoc/Texinfo.
Signed-off-by: David Kastrup <dak@gnu.org>
This attempts to force fixed-font in manpages for literal
blocks. I have tested this with docbook 1.71 and it seems to
work as expected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hides the backslash at the end of line from AsciiDoc
toolchain by introducing a trailing whitespace on one line in an
illustration in git-rev-parse.txt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic idea was proposed by Steve Hoelzer; in order to make
the list easier to search, we keep the command list in the
script that generates it with "sort -d".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic idea is from Mark Levedahl. I do not use GZ=1 nor
quick-install-doc myself (there obviously is a chicken-and-egg
issue with quick-install-doc for me).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These instructions tell you how to create a clone of a repository
created with git-svn, that can in turn be used with git-svn.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with git-add, I think previous updates to the git-commit man page did
indeed help make it more user-friendly. But I think the banishment of
the word "index" from the description goes too far; reinstate its use,
to simplify some of the language slightly and smooth the transition to
other documentation.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://linux-nfs.org/~bfields/git:
documentation: use the word "index" in the git-add manual page
user-manual: mention git-gui
user-manual: mention git stash
user-manual: update for new default --track behavior
It was a neat trick to show that you could introduce the git-add manual
page without using the word "index", and it was certainly an improvement
over the previous man page (which started out "A simple wrapper for
git-update-index to add files to the index...").
But it's possible to use the standard terminology without sacrificing
user-friendliness. So, rewrite to use the word "index" when
appropriate.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The git gui project seems to be still in early stages, but at a point
where it's worth mentioning as an alternative way of creating commits.
One feature of interest is the ability to manipulate individual diff
hunks. However, people have found that feature not to be easily
discoverable from the user-interface. Pending some ui improvements, a
parenthetical hint here may help.
(Thanks to Steffen Prohask and Junio Hamano for suggesting the
language.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Update documentation to reflect the --track default.
That change seems to have happened in the 1.5.3 -rc's, so bump the "for
version x.y.z or newer" warning as well.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The script starts in a subdirectory of the source directory to
muck with a branch whose structure does not have anything to
do with the actual work tree. Go up to the top to make it clear
that we operate on the whole tree.
It also exported GIT_DIR without any good reason. Remove it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-push it is the remote repository and not the
local repository which is fast forwarded. The description
of the -f option in the git-push manpage gets it the other
way round.
Signed-off-by: Jyotirmoy Bhattacharya <jyotirmoy@jyotirmoy.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_SSH environment variable has survived for quite a while
without being documented, but has been mentioned on list and on
my day-job repositories can only be accessed via magic supplied
through the wonderous hack that is GIT_SSH.
Advertising it alongside other "low level magic" such as GIT_PAGER
and GIT_MERGE_VERBOSITY will certainly help others who need to
spread their own pixie dust to make things work.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of core.gitproxy only operates on
git:// URLs, so the ssh:// examples and custom protocol examples
have been removed or edited.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the behaviour of cloning from a repository on the
local machine, by defaulting to "-l" (use hardlinks to share
files under .git/objects) and making "-l" a no-op. A new
option, --no-hardlinks, is also added to cause file-level copy
of files under .git/objects while still avoiding the normal
"pack to pipe, then receive and index pack" network transfer
overhead. The old behaviour of local cloning without -l nor -s
is availble by specifying the source repository with the newly
introduced file:///path/to/repo.git/ syntax (i.e. "same as
network" cloning).
* With --no-hardlinks (i.e. have all .git/objects/ copied via
cpio) would not catch the source repository corruption, and
also risks corrupted recipient repository if an
alpha-particle hits memory cell while indexing and resolving
deltas. As long as the recipient is created uncorrupted, you
have a good back-up.
* same-as-network is expensive, but it would catch the breakage
of the source repository. It still risks corrupted recipient
repository due to hardware failure. As long as the recipient
is created uncorrupted, you have a good back-up.
* The new default on the same filesystem, as long as the source
repository is healthy, it is very likely that the recipient
would be, too. Also it is very cheap. You do not get any
back-up benefit, though.
None of the method is resilient against the source repository
corruption, so let's discount that from the comparison. Then
the difference with and without --no-hardlinks matters primarily
if you value the back-up benefit or not. If you want to use the
cloned repository as a back-up, then it is cheaper to do a clone
with --no-hardlinks and two git-fsck (source before clone,
recipient after clone) than same-as-network clone, especially as
you are likely to do a git-fsck on the recipient if you are so
paranoid anyway.
Which leads me to believe that being able to use file:/// is
probably a good idea, if only for testability, but probably of
little practical value. We default to hardlinked clone for
everyday use, and paranoids can use --no-hardlinks as a way to
make a back-up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes "make doc" work even if you made "sudo make doc" previously
by mistake. Apparently an oversight: the other targets did this already.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I switched git.kernel.dk to --base-path a few minutes ago, to get rid of
a /data/git postfix in the posted urls. But transitioning is tricky,
since now all old paths will fail miserably.
So I added this --base-path-relaxed option, that will make git-daemon
try the absolute path without prefixing --base-path before giving up.
With this in place and --base-path-relaxed added, both my new url of
git://git.kernel.dk/linux-2.6-block.git
and the old
git://git.kernel.dk/data/git/linux-2.6-block.git
work fine.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are (really!) systems where using environment variables is very
cumbersome (yes, Windows, it has problems unsetting them). Besides this
form is shorter.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file used for per-repository attribute setting is not
$GIT_DIR/info/gitattributes, but $GIT_DIR/info/attributes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling 'git-diff --name-status' will recursively show any
changes already, and it has for quite some time (at least as
far back as v1.4.1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --strip-comments (or short -s), git stripspace now removes lines
beginning with a '#', too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces "git-verify-tag.sh" with "builtin-verify-tag.c".
Testing relies on the "git tag -v" tests calling this command.
A temporary file is needed when calling to gpg, because git is
already creating detached signatures (gpg option -b) to sign tags
(instead of leaving gpg to add the signature to the file by itself),
and those signatures need to be supplied in a separate file to be
verified by gpg.
The program uses git_mkstemp to create that temporary file needed by
gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to
allow the command to be used in read-only repositories, and also
prevent other instances of git to read or remove the same file.
Signal SIGPIPE is ignored because the program sometimes was
terminated because that signal when writing the input for gpg.
The command now can receive many tag names to be verified.
Documentation is also updated here to reflect this new behaviour.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add it to the list in config.txt and explicitly say that the
--template option to git-commit overrides the configuration variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The NUL you see in "git log" (without diff) output are between records,
not at the end of each record.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are useful in organizations that enforce particular formats
for commit messages, e.g., to specify bug IDs or test plans.
Use of the template is not enforced; it is simply used as the
initial content when the editor is invoked.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There have been several complaints against k.org's user-manual
page. The document is generated in ISO-8859-1 by the xsltproc
toolchain (I suspect this is because released docbook.xsl we use
has xsl:output element that says the output is ISO-8859-1) but
server delivers it with "charset=UTF-8", and all h*ll breaks
loose.
This attempts to force UTF-8 on the generating end.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flag "no_walk" is present in struct rev_info since a long time, but
so far has been in use exclusively by "git show".
With this flag, you can see all your refs, ordered by date of the last
commit:
$ git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
which is extremely helpful if you have to juggle with a lot topic
branches, and do not remember in which one you introduced that uber
debug option, or simply want to get an overview what is cooking.
(Note that the "git log" invocation above does not output the same as
$ git show --abbrev-commit --pretty=oneline --decorate --all --quiet
since "git show" keeps the alphabetic order that "--all" returns the
refs in, even if the option "--date-order" was passed.)
For good measure, this also adds the "--do-walk" option which overrides
"--no-walk".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to take the first non-option argument as the name for the new
branch. This syntax is not extensible to support rewriting more than just
HEAD.
Instead, we now have the following syntax:
git filter-branch [<filter options>...] [<rev-list options>]
All positive refs given in <rev-list options> are rewritten. Yes,
in-place. If a ref was changed, the original head is stored in
refs/original/$ref now, for your inspecting pleasure, in addition to the
reflogs (since it is easier to inspect "git show-ref | grep original" than
to inspect all the reflogs).
This commit also adds the --force option to remove .git-rewrite/ and all
refs from refs/original/ before filtering.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for a lost blob, it is much nicer to be able to grep
through .git/lost-found/other/* than to write an inefficient loop
over the file names. So write the contents of the dangling blobs,
not their object names.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options to log family were too long to type. Give them
shorter synonyms.
Fix the parsing of the long options while at it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command was recently updated to take message on the command line, but
this feature has not been documented.
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the html output we can use a stylesheet to make sure that the
listingblocks are presented in a monospaced font. For the manpages do
it manually by inserting a ".ft C" before and ".ft" after the block in
question.
In order for these roff commands to get through to the manpage they
have to be element encoded to prevent quoting.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4import.py and Documentation/git-p4import.txt into
a contrib/p4import directory. Add a README there directing
people to contrib/fast-import/git-p4 as a better alternative.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://repo.or.cz/git/fastimport:
Teach fast-import to recursively copy files/directories
Fix git-p4 on Windows to not use the Posix sysconf function.
Correct trivial typo in fast-import documentation
Some source material (e.g. Subversion dump files) perform directory
renames by telling us the directory was copied, then deleted in the
same revision. This makes it difficult for a frontend to convert
such data formats to a fast-import stream, as all the frontend has
on hand is "Copy a/ to b/; Delete a/" with no details about what
files are in a/, unless the frontend also kept track of all files.
The new 'C' subcommand within a commit allows the frontend to make a
recursive copy of one path to another path within the branch, without
needing to keep track of the individual file paths. The metadata
copy is performed in memory efficiently, but is implemented as a
copy-immediately operation, rather than copy-on-write.
With this new 'C' subcommand frontends could obviously implement an
'R' (rename) on their own as a combination of 'C' and 'D' (delete),
but since we have already offered up 'R' in the past and it is a
trivial thing to keep implemented I'm not going to deprecate it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In the previous behavior, "git-rm --cached" (without -f) had the same
restriction as "git-rm". This forced the user to use the -f flag in
situations which weren't actually dangerous, like:
$ git add foo # oops, I didn't want this
$ git rm --cached foo # back to initial situation
Previously, the index had to match the file *and* the HEAD. With
--cached, the index must now match the file *or* the HEAD. The behavior
without --cached is unchanged, but provides better error messages.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now, git-log family can take full range of internally supported date format
to their --date=<format> argument. Document it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support output of full ISO 8601 style dates in e.g. git log
and other places that use interpolation for formatting.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation based on description of commit 443f8338 which added
'-u'|'--untracked-files' option to git-status, and on git-runstatus(1)
man page.
Note that those options apply also to git-status.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that '--message=<msg>' is long version of '-m <msg>' in
git-commit, and that '--no-checkout' is long version of '-n' in
git-clone.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "Configuration" section to describe merge.summary
configuration variable (which is mentioned in git-fmt-merge-msg(1)
man page, but it is a plumbing command), and merge.verbosity
configuration variable (so there is a place to make reference
from "Environment Variables" section of git(7) man page) to the
git-merge(1) man page. Also describe GIT_MERGE_VERBOSITY
environment.
The configuration variable merge.verbosity and environment variable
GIT_MERGE_VERBOSITY were introduced in commit 8c3275ab, which also
documented configuration variable but not environment variable.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After vainly searching the Documentation for how to follow renames, I
finally broke down and grepped the source. It would appear that Linus
didn't add write and docs for this feature when he wrote it. The
following patch rectifies that, hopefully sparing future users from
resorting to the source code.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.2.4
Teach read-tree 2-way merge to ignore intermediate symlinks
git-gui: Work around bad interaction between Tcl and cmd.exe on ^{tree}
git-gui: Don't linewrap within console windows
git-gui: Correct ls-tree buffering problem in browser
git-gui: Skip nicknames when selecting author initials
git-gui: Ensure windows shortcuts always have .bat extension
git-gui: Include a Push action on the left toolbar
git-gui: Bind M1-P to push action
git-gui: Don't bind F5/M1-R in all windows
git-gui: Unlock the index when cancelling merge dialog
git-gui: properly popup error if gitk should be started but is not installed
This patch cleans up some complicated code, and replaces it with a
cleaner version, using code from remote.[ch], which got extended a
little in the process. This also enables us to fix two cases:
The earlier "fix" to setup tracking only when the original ref started
with "refs/remotes" is wrong. You are absolutely allowed to use a
separate layout for your tracking branches. The correct fix, of course,
is to set up tracking information only when there is a matching
remote.<nick>.fetch line containing a colon.
Another corner case was not handled properly. If two remotes write to
the original ref, just warn the user and do not set up tracking.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some source material (e.g. Subversion dump files) perform directory
renames without telling us exactly which files in that subdirectory
were moved. This makes it hard for a frontend to convert such data
formats to a fast-import stream, as all the frontend has on hand
is "Rename a/ to b/" with no details about what files are in a/,
unless the frontend also kept track of all files.
The new 'R' subcommand within a commit allows the frontend to
rename either a file or an entire subdirectory, without needing to
know the object's SHA-1 or the specific files contained within it.
The rename is performed as efficiently as possible internally,
making it cheaper than a 'D'/'M' pair for a file rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The 'D' subcommand within a commit can also delete a directory
recursively. This wasn't clear in the prior version of the
documentation, leading to a question on the mailing list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since the external interface seems to have stabilized for this
new feature, let's document it properly.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
user-manual: fix directory name in git-archive example
user-manual: more explanation of push and pull usage
tutorial: Fix typo
user-manual: grammar and style fixes
Junio noticed that switching on autosetupmerge unilaterally started
cluttering the config for local branches. That is not the original
intention of branch.autosetupmerge, which was meant purely for
convenience when branching off of remote branches, but that semantics
got lost somewhere.
If you still want that "new" behavior, you can switch
branch.autosetupmerge to the value "all". Otherwise, it is interpreted
as a boolean, which triggers setting up defaults _only_ when branching
off of a remote branch, i.e. the originally intended behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently a user on the mailing list complained that they'd read the
manual but couldn't figure out how to keep a couple private repositories
in sync. They'd tried using push, and were surprised by the effect.
Add a little text in an attempt to make it clear that:
- Pushing to a branch that is checked out will have odd results.
- It's OK to synchronize just using pull if that's simpler.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
- "method of" is vulgar, "method for" is nicer
- "recovery" becomes "recovering" from Steve Hoelzer's original version
of this patch
- "if you want" is nicer as "if you wish"
- "you may" should be "you can"; "you may" is "you have permission to"
rather than "you can"'s "it is possible to"
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
When git-submodule was updated to allow mapping between submodule name and
submodule path, the documentation was left untouched.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache. That is definitely not in line with most other
features, which are enabled by a config variable.
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
[jc: with minimum tweaks]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS section of git-submodule.txt contains two forms. Since
it doesn't use the verse style, the line boundary between them is not
preserved and the second form can appear on the same line as the first
form. Adding [verse] enables the verse style, which preserves the
line boundary between them.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This one fixes a small formulation weirdness in
Documentation/user-manual.txt
Signed-off-by: Marcus Fritzsch <m@fritschy.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bob cloned from Alice.
The origin url is actually Alice's repo.
Signed-off-by: Alecs King <alecsk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All filters, except the commit filter, are evaluated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git-clone is one of the many commands taking
URLs to remote repositories as an argument, it should include
the URL-types list from urls.txt.
Split up urls.txt into urls.txt and urls-remotes.txt. The latter
should be used by anything besides git-clone where a discussion of
using .git/config and .git/remotes/ to name URLs just doesn't make
as much sense.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- The map function used to fail, but no longer does (since 3520e1e8687.)
- Fix the "edge-graft" example.
- Show the same using .git/info/grafts.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All based on comments from Frank Lichtenheld.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a configuration variable that performs the same function as,
but is overridden by, GIT_PAGER.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Acked-by: Johannes E. Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document -<n> for git-format-patch
glossary: add 'reflog'
diff --no-index: fix --name-status with added files
Don't smash stack when $GIT_ALTERNATE_OBJECT_DIRECTORIES is too long
To prevent funky games with external diff engines, git-log and
friends prevent external diff engines from being called. That makes
sense in the context of git-format-patch or git-rebase.
However, for "git log -p" it is not so nice to get the message
that binary files cannot be compared, while "git diff" has no
problems with them, if you provided an external diff driver.
With this patch, "git log --ext-diff -p" will do what you expect,
and the option "--no-ext-diff" can be used to override that
setting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the documentation in git-filter-branch.sh to its own
man page, with a few touch ups (incorporating comments by Frank
Lichtenheld).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -<n> option was not mentioned in git-format-patch's manpage till
now. Fix this.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option, dangling objects are not only reported, but also
written to .git/lost-found/commit/ or .git/lost-found/other/. This
option implies '--full' and '--no-reflogs'.
'git fsck --lost-found' is meant as a replacement for git-lost-found.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change lets you use the format.subjectprefix config option to override the
default subject prefix.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/stash:
Documentation: quote {non-attributes} for asciidoc
git-stash: don't complain when listing in a repo with no stash
git-stash: fix "can't shift that many" with no arguments
git-stash: fix "no arguments" case in documentation
git-stash: require "save" to be explicit and update documentation
Document git-stash
Add git-stash script
* js/rebase:
Teach rebase -i about --preserve-merges
rebase -i: provide reasonable reflog for the rebased branch
rebase -i: several cleanups
ignore git-rebase--interactive
Teach rebase an interactive mode
Move the pick_author code to git-sh-setup
Change "to made" to "made to", which is a typo. Use "reflog"
instead of "ref log", which is used elsewhere throughout the
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc treats {foo} as an attribute to be substituted; if
'foo' doesn't exist as an attribute, then the entire line
gets dropped. When the literal {foo} is desired, \{foo} is
required.
The exceptions to this rule are:
- inside literal blocks
- if the 'foo' contains non-alphanumeric characters (e.g.,
{foo|bar} is assumed not to be an attribute)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make a submodule effectively usable, the path and
a URL where the submodule can be cloned need to be stored
in .gitmodules. This subcommand takes care of setting
this information after cloning the new submodule.
Only the index is updated, so, if needed, the user may still
change the URL or switch to a different branch of the submodule
before committing.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc treats {foo} as an attribute to be substituted; if
'foo' doesn't exist as an attribute, then the entire line
gets dropped. When the literal {foo} is desired, \{foo} is
required.
The exceptions to this rule are:
- inside literal blocks
- if the 'foo' contains non-alphanumeric characters (e.g.,
{foo|bar} is assumed not to be an attribute)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9488e875 changed this from 'save' to 'list', but
missed this spot in the documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
This describes the git-stash command.
I borrowed a few paragraphs from Johannes's version, and added a few
examples.
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch arose from a discussion started by Jim Meyering's patch
whose intention was to provide better diagnostics for failed writes.
Linus proposed a better way to do things, which also had the added
benefit that adding a fflush() to git-log-* operations and incremental
git-blame operations could improve interactive respose time feel, at
the cost of making things a bit slower when we aren't piping the
output to a downstream program.
This patch skips the fflush() calls when stdout is a regular file, or
if the environment variable GIT_FLUSH is set to "0". This latter can
speed up a command such as:
GIT_FLUSH=0 strace -c -f -e write time git-rev-list HEAD | wc -l
a tiny amount.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'show' and 'prune' commands accept an option '-n'; document what
it does.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some minor enhancements to the git-repack manual page.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-init lacks an option to suppress non-error and non-warning output -
this patch adds one.
Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes git-send-email's behavior easier to modify by adding config
equivalents for two more of git-send-email's flags.
The mapping of flag to config setting is:
--[no-]supress-from => sendemail.suppressfrom
--[no-]signed-off-cc => sendemail.signedoffcc
It renames the --threaded option to --thread/--no-thread; the
config variable is also called sendemail.thread.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --threaded option controls whether the In-Reply-To header will be set on
any emails sent. The current behavior is to always set this header, so this
option is most useful in its negated form, --no-threaded. This behavior can
also be controlled through the 'sendemail.threaded' config setting.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use \n as delimiter between key and value and \0 as
delimiter after each key/value pair. This should be
easily parsable output.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option "-p" (or long "--preserve-merges") makes it possible to
rebase side branches including merges, without straightening the
history.
Example:
X
\
A---M---B
/
---o---O---P---Q
When the current HEAD is "B", "git rebase -i -p --onto Q O" will yield
X
\
---o---O---P---Q---A'---M'---B'
Note that this will
- _not_ touch X [*1*], it does
- _not_ work without the --interactive flag [*2*], it does
- _not_ guess the type of the merge, but blindly uses recursive or
whatever strategy you provided with "-s <strategy>" for all merges it
has to redo, and it does
- _not_ make use of the original merge commit via git-rerere.
*1*: only commits which reach a merge base between <upstream> and HEAD
are reapplied. The others are kept as-are.
*2*: git-rebase without --interactive is inherently patch based (at
least at the moment), and therefore merges cannot be preserved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The asciidoc documentation of the --get-regexp option was
incomplete. Add some missing pieces:
- List the option in SYNOPSIS
- Mention that key names are printed
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rounding down the printed (dis)similarity index allows us to use
"100%" as a special value that indicates complete rewrites and
fully equal file contents, respectively.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't you just hate the fact sometimes, that git-rebase just applies
the patches, without any possibility to edit them, or rearrange them?
With "--interactive", git-rebase now lets you edit the list of patches,
so that you can reorder, edit and delete patches.
Such a list will typically look like this:
pick deadbee The oneline of this commit
pick fa1afe1 The oneline of the next commit
...
By replacing the command "pick" with the command "edit", you can amend
that patch and/or its commit message, and by replacing it with "squash"
you can tell rebase to fold that patch into the patch before that.
It is derived from the script sent to the list in
<Pine.LNX.4.63.0702252156190.22628@wbgn013.biozentrum.uni-wuerzburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always quote "unusual" byte values in a pathname using
C-string style, to make it safer for parsing scripts that do not
handle NUL separated records well (or just too lazy to bother).
The absolute minimum bytes that need to be quoted for this
purpose are TAB, LF (and other control characters), double quote
and backslash.
However, we have also always quoted the bytes in high 8-bit
range; this was partly because we were lazy and partly because
we were being cautious.
This introduces an internal "quote_path_fully" variable, and
core.quotepath configuration variable to control it. When set
to false, it does not quote bytes in high 8-bit range anymore
but passes them intact.
The variable defaults to "true" to retain the traditional
behaviour for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make clear in the documentation that when using --branches/-b and
--prefix with 'init', the prefix must include a trailing slash.
This matches the actual behavior of git-svn, e.g.:
$ git svn init -Ttrunk -treleases -bbranches --prefix xxx \
http://svn.sacredchao.net/svn/quodlibet/
--prefix='xxx' must have a trailing slash '/'
$
This was noticed by R. Vanicat and reported through
http://bugs.debian.org/429443
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski pointed out that the git-gui blame viewer is not a
widely known feature, but is incredibly useful. Part of the issue
is advertising. Up until now we haven't even referenced git-gui from
within the core Git manual pages, mostly because I just wasn't sure
how I wanted to supply git-gui documentation to end-users, or how
that documentation should integrate with the core Git documentation.
Based upon Jakub's comment that many users may not even know that
the gui is available in a stock Git distribution I'm offering up
two basic manual pages: git-citool and git-gui. These should offer
enough of a starting point for users to identify that the gui exists,
and how to start it. Future releases of git-gui may contain their
own documentation system available from within a running git-gui.
But not today.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on description of commit 477f2b4131
"git log --full-diff" adding this option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation taken from paraphrased description of "--abbrev[=<n>]"
diff option, and from description of commit 5c51c985 introducing
this option.
Note that to change number of digits one must use "--abbrev=<n>",
which affects [also] diff output.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that git log does not understand this option yet:
$ git log --timestamp
fatal: unrecognized argument: --timestamp
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document --stale-fix, used in "git reflog expire --stale-fix --all"
to remove invalid reflog entries, to fix situation after running
non reflog-aware git-prune from an older git in the presence of
reflogs (see RelNotes-1.5.0.txt).
Based on description of commit 1389d9ddaa
"reflog expire --fix-stale"
which introduced this option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/remote:
git-push: Update description of refspecs and add examples
remote.c: "git-push frotz" should update what matches at the source.
remote.c: fix "git push" weak match disambiguation
remote.c: minor clean-up of match_explicit()
remote.c: refactor creation of new dst ref
remote.c: refactor match_explicit_refs()
* fl/cvsserver:
cvsserver: Actually implement --export-all
cvsserver: Let --base-path and pserver get along just fine
cvsserver: Add some useful commandline options
* lh/submodule:
gitmodules(5): remove leading period from synopsis
Add gitmodules(5)
git-submodule: give submodules proper names
Rename sections from "module" to "submodule" in .gitmodules
git-submodule: remember to checkout after clone
t7400: barf if git-submodule removes or replaces a file
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc treats a line starting with a period followed by a title as a
blocktitle element. My introduction of gitmodules(5) unfortunatly broke
the documentation build process due to this processing, since it made
asciidoc generate an illegal (empty) synopsis element. Removing the leading
period fixes the problem and also makes gitmodules(5) use the same synopsis
notation as gitattributes(5).
Noticed-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Embarrassing bug number two in my options patch.
Also enforce that --export-all is only ever used together with an
explicit whitelist. Otherwise people might export every git repository
on the whole system without realising.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* aw/cvs:
cvsimport: add <remote>/HEAD reference in separate remotes more
cvsimport: update documentation to include separate remotes option
cvsimport: add support for new style remote layout
Earlier, a second "-C" on the command line had no effect.
But "--find-copies-harder" is so long to type, let's make doubled -C
enable that option. It is in line with how "git blame" handles such
doubled options to mean "work harder".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tutorial: use "project history" instead of "changelog" in header
Documentation: user-manual todo
user-manual: add a missing section ID
Fix typo in remote branch example in git user manual
user-manual: quick-start updates
The word "changelog" seems a little too much like jargon to me, and beginners
must understand section headers so they know where to look for help.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
In Documentation/user-manual.txt the example
$ git checkout --track -b origin/maint maint
under "Getting updates with git pull", should read
$ git checkout --track -b maint origin/maint
This was noticed by Ron, and reported through
http://bugs.debian.org/427502
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Update text to reflect new position in appendix.
Update the name to reflect the fact that this is closer to reference
than tutorial documentation (as suggested by Jonas Fonseca).
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
When refactoring code to split one iteration of a too deeply
nested loop into a separate function, it inevitably makes the
indentation levels shallower (that's the sole point of such a
refactoring). With "git blame -w", you can ignore such
re-indentation and pass blame for such moved lines to the
parent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In several of the text messages, the tense of the verb is inconsistent.
For example, "Add" vs "Creates". It is customary to use imperative for
command description.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-cvsserver understand some options inspired by
git-daemon, namely --base-path, --export-all, --strict-paths.
Also allow the caller to specify a whitelist of allowed
directories, again similar to git-daemon.
While already adding option parsing also support the common
--help and --version options.
Rationale:
While the gitcvs.enabled configuration option already
offers means to limit git-cvsserver access to a repository,
there are some use cases where other methods of access
control prove to be more useful.
E.g. if setting up a pserver for a collection of public
repositories one might want limit the exported repositories
to exactly the directory this collection is located whithout
having to worry about other repositories that might lie around
with the configuration variable set (never trust your users ;)
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
