Various leak fixes.
* ab/various-leak-fixes:
built-ins: use free() not UNLEAK() if trivial, rm dead code
revert: fix parse_options_concat() leak
cherry-pick: free "struct replay_opts" members
rebase: don't leak on "--abort"
connected.c: free the "struct packed_git"
sequencer.c: fix "opts->strategy" leak in read_strategy_opts()
ls-files: fix a --with-tree memory leak
revision API: call graph_clear() in release_revisions()
unpack-file: fix ancient leak in create_temp_file()
built-ins & libs & helpers: add/move destructors, fix leaks
dir.c: free "ident" and "exclude_per_dir" in "struct untracked_cache"
read-cache.c: clear and free "sparse_checkout_patterns"
commit: discard partial cache before (re-)reading it
{reset,merge}: call discard_index() before returning
tests: mark tests as passing with SANITIZE=leak
Fix various leaks in built-ins, libraries and a test helper here we
were missing a call to strbuf_release(), string_list_clear() etc, or
were calling them after a potential "return".
Comments on individual changes:
- builtin/checkout.c: Fix a memory leak that was introduced in [1]. A
sibling leak introduced in [2] was recently fixed in [3]. As with [3]
we should be using the wt_status_state_free_buffers() API introduced
in [4].
- builtin/repack.c: Fix a leak that's been here since this use of
"strbuf_release()" was added in a1bbc6c017 (repack: rewrite the shell
script in C, 2013-09-15). We don't use the variable for anything
except this loop, so we can instead free it right afterwards.
- builtin/rev-parse: Fix a leak that's been here since this code was
added in 21d4783538 (Add a parseopt mode to git-rev-parse to bring
parse-options to shell scripts., 2007-11-04).
- builtin/stash.c: Fix a couple of leaks that have been here since
this code was added in d4788af875 (stash: convert create to builtin,
2019-02-25), we strbuf_release()'d only some of the "struct strbuf" we
allocated earlier in the function, let's release all of them.
- ref-filter.c: Fix a leak in 482c119186 (gpg-interface: improve
interface for parsing tags, 2021-02-11), we don't use the "payload"
variable that we ask parse_signature() to populate for us, so let's
free it.
- t/helper/test-fake-ssh.c: Fix a leak that's been here since this
code was added in 3064d5a38c (mingw: fix t5601-clone.sh,
2016-01-27). Let's free the "struct strbuf" as soon as we don't need
it anymore.
1. c45f0f525d (switch: reject if some operation is in progress,
2019-03-29)
2. 2708ce62d2 (branch: sort detached HEAD based on a flag,
2021-01-07)
3. abcac2e19f (ref-filter.c: fix a leak in get_head_description,
2022-09-25)
4. 962dd7ebc3 (wt-status: introduce wt_status_state_free_buffers(),
2020-09-27).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new `--exclude-hidden=` option that is similar to the one we just
added to git-rev-list(1). Given a section name `uploadpack` or `receive`
as argument, it causes us to exclude all references that would be hidden
by the respective `$section.hideRefs` configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The functions that handle exclusion of refs work on a single string
list. We're about to add a second mechanism for excluding refs though,
and it makes sense to reuse much of the same architecture for both kinds
of exclusion.
Introduce a new `struct ref_exclusions` that encapsulates all the logic
related to excluding refs and move the `struct string_list` that holds
all wildmatch patterns of excluded refs into it. Rename functions that
operate on this struct to match its name.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Undoes 'jk/unused-annotation' topic and redoes it to work around
Coccinelle rules misfiring false positives in unrelated codepaths.
* ab/unused-annotation:
git-compat-util.h: use "deprecated" for UNUSED variables
git-compat-util.h: use "UNUSED", not "UNUSED(var)"
Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
After 2d893dff4c (rev-parse --parseopt: allow [*=?!] in argument hints,
2015-07-14) updated the parser, a line in parseopts's input can start
with one of the flag characters and be erroneously parsed as a opt-spec
where the short name of the option is the flag character itself and the
long name is after the end of the string. This makes Git want to
allocate SIZE_MAX bytes of memory at this line:
o->long_name = xmemdupz(sb.buf + 2, s - sb.buf - 2);
Since s and sb.buf are equal the second argument is -2 (except unsigned)
and xmemdupz allocates len + 1 bytes, ie. -1 meaning SIZE_MAX.
Avoid this by checking whether a flag character was found in the zeroth
position.
Reported-by: Ingy dot Net <ingy@ingy.net>
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions used with for_each_ref(), etc, need to conform to the
each_ref_fn interface. But most of them don't need every parameter;
let's annotate the unused ones to quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
It is not obvious that the 'git rev-parse' builtin would use the sparse
index, but it is possible to parse paths out of the index using the
":<path>" syntax. The 'git rev-parse' output is only the OID of the
object found at that location, but otherwise behaves similarly to 'git
show :<path>'. This includes the failure conditions on directories and
the error messages depending on whether a path is in the worktree or
not.
The only code change required is to change the
command_requires_full_index setting in builtin/rev-parse.c, and we can
re-use many existing 'git show' tests for the rev-parse case.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No callers pass in anything but "0" here. Likewise to our sibling
functions. Note that some of them ferry along the flag, but none of
their callers pass anything but "0" either.
Nor is anybody likely to change that. Callers which really want to see
all of the raw refs use for_each_rawref(). And anybody interested in
iterating a subset of the refs will likely be happy to use the
now-default behavior of showing broken refs, but omitting dangling
symlinks.
So we can get rid of this whole feature.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These error messages are intended for the user. Let's touch them up
since we're here from the previous commit.
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling "git rev-parse --path-format" without an argument segfaults
instead of giving an error message. Commit fac60b8925 (rev-parse: add
option for absolute or relative path formatting, 2020-12-13) added the
argument parsing code but forgot to handle NULL.
Returning an error makes sense here because there is no default value we
could use. Add a test case to verify.
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rev-parse has several options which print various paths. Some of
these paths are printed relative to the current working directory, and
some are absolute.
Normally, this is not a problem, but there are times when one wants
paths entirely in one format or another. This can be done trivially if
the paths are canonical, but canonicalizing paths is not possible on
some shell scripting environments which lack realpath(1) and also in Go,
which lacks functions that properly canonicalize paths on Windows.
To help out the scripter, let's provide an option which turns most of
the paths printed by git rev-parse to be either relative to the current
working directory or absolute and canonical. Document which options are
affected and which are not so that users are not confused.
This approach is cleaner and tidier than providing duplicates of
existing options which are either relative or absolute.
Note that if the user needs both forms, it is possible to pass an
additional option in the middle of the command line which changes the
behavior of subsequent operations.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We taught rev-list a new way to separate options from revisions in
19e8789b23 (revision: allow --end-of-options to end option parsing,
2019-08-06), but rev-parse uses its own parser. It should know about
--end-of-options not only for consistency, but because it may be
presented with similarly ambiguous cases. E.g., if a caller does:
git rev-parse "$rev" -- "$path"
to parse an untrusted input, then it will get confused if $rev contains
an option-like string like "--local-env-vars". Or even "--not-real",
which we'd keep as an option to pass along to rev-list.
Or even more importantly:
git rev-parse --verify "$rev"
can be confused by options, even though its purpose is safely parsing
untrusted input. On the plus side, it will always fail the --verify
part, as it will not have parsed a revision, so the caller will
generally "fail closed" rather than continue to use the untrusted
string. But it will still trigger whatever option was in "$rev"; this
should be mostly harmless, since rev-parse options are all read-only,
but I didn't carefully audit all paths.
This patch lets callers write:
git rev-parse --end-of-options "$rev" -- "$path"
and:
git rev-parse --verify --end-of-options "$rev"
which will both treat "$rev" always as a revision parameter. The latter
is a bit clunky. It would be nicer if we had defined "--verify" to
require that its next argument be the revision. But we have not
historically done so, and:
git rev-parse --verify -q "$rev"
does currently work. I added a test here to confirm that we didn't break
that.
A few implementation notes:
- We don't document --end-of-options explicitly in commands, but rather
in gitcli(7). So I didn't give it its own section in git-rev-parse(1).
But I did call it out specifically in the --verify section, and
include it in the examples, which should show best practices.
- We don't have to re-indent the main option-parsing block, because we
can combine our "did we see end of options" check with "does it start
with a dash". The exception is the pre-setup options, which need
their own block.
- We do however have to pull the "--" parsing out of the "does it start
with dash" block, because we want to parse it even if we've seen
--end-of-options.
- We'll leave "--end-of-options" in the output. This is probably not
technically necessary, as a careful caller will do:
git rev-parse --end-of-options $revs -- $paths
and anything in $revs will be resolved to an object id. However, it
does help a slightly less careful caller like:
git rev-parse --end-of-options $revs_or_paths
where a path "--foo" will remain in the output as long as it also
exists on disk. In that case, it's helpful to retain --end-of-options
to get passed along to rev-list, s it would otherwise see just
"--foo".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option-parsing loop of rev-parse checks whether the first character
of an arg is "-". If so, then it enters a series of conditionals
checking for individual options. But some options are inexplicably
outside of that outer conditional.
This doesn't produce the wrong behavior; the conditional is actually
redundant with the individual option checks, and it's really only its
fallback "continue" that we care about. But we should at least be
consistent.
One obvious alternative is that we could get rid of the conditional
entirely. But we'll be using the extra block it provides in the next
patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because of the order in which we check options in rev-parse, there are a
few options we accept even after a "--". This is wrong, because the
whole point of "--" is to say "everything after here is a path". Let's
move the "did we see a dashdash" check (it's called "as_is" in the code)
to the top of the parsing loop.
Note there is one subtlety here. The options are ordered so that some
are checked before we even see if we're in a repository (they continue
the loop, and if we get past a certain point, then we do the repository
setup). By moving the as_is check higher, it's also in that "before
setup" section, even though it might look at the repository via
verify_filename(). However, this works out: we'd never set as_is until
we parse "--", and we don't parse that until after doing the setup.
An alternative here to avoid the subtlety is to put the as_is check at
the top of the post-setup options. But then every pre-setup option would
have to remember to check "if (!as_is && !strcmp(...))". So while this
is a bit magical, it's harder for future code to get wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many functions in commit.h that are more related to shallow
repositories than they are to any sort of generic commit machinery.
Likely this began when there were only a few shallow-related functions,
and commit.h seemed a reasonable enough place to put them.
But, now there are a good number of shallow-related functions, and
placing them all in 'commit.h' doesn't make sense.
This patch extracts a 'shallow.h', which takes all of the declarations
from 'commit.h' for functions which already exist in 'shallow.c'. We
will bring the remaining shallow-related functions defined in 'commit.c'
in a subsequent patch.
For now, move only the ones that already are implemented in 'shallow.c',
and update the necessary includes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Together with the previous commits, this commit fully fixes the problem
of using shared buffer for `real_path()` in `get_superproject_working_tree()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Returning a shared buffer invites very subtle bugs due to reentrancy or
multi-threading, as demonstrated by the previous patch.
There was an unfinished effort to abolish this [1].
Let's finally rid of `real_path()`, using `strbuf_realpath()` instead.
This patch uses a local `strbuf` for most places where `real_path()` was
previously called.
However, two places return the value of `real_path()` to the caller. For
them, a `static` local `strbuf` was added, effectively pushing the
problem one level higher:
read_gitfile_gently()
get_superproject_working_tree()
[1] https://lore.kernel.org/git/1480964316-99305-1-git-send-email-bmwill@google.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since it was introduced in 7cceca5ccc (Add 'git rev-parse
--show-toplevel' option., 2010-01-12), the --show-toplevel option has
treated a missing working tree as a quiet success: it neither prints a
toplevel path, but nor does it report any kind of error.
While a caller could distinguish this case by looking for an empty
response, the behavior is rather confusing. We're better off complaining
that there is no working tree, as other internal commands would do in
similar cases (e.g., "git status" or any builtin with NEED_WORK_TREE set
would just die()). So let's do the same here.
While we're at it, let's clarify the documentation and add some tests,
both for the new behavior and for the more mundane case (which was not
covered).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to print the object format used for input, output, or
storage. This allows shell scripts to discover the hash algorithm in
use.
Since the transition plan allows for multiple input algorithms, document
that we may provide multiple results for input, and the format that the
results may take. While we don't support this now, documenting it early
means that script authors can future-proof their scripts for when we do.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch several hard-coded uses of the constant 40 to references to
the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This kills the_index dependency in get_oid_with_context() but for
get_oid() and friends, they still assume the_repository (which also
means the_index).
Unfortunately the widespread use of get_oid() will make it hard to
make the conversion now. We probably will add repo_get_oid() at some
point and limit the use of get_oid() in builtin/ instead of forcing
all get_oid() call sites to carry struct repository.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse --exclude=* --branches --branches" (i.e. first
saying "add only things that do not match '*' out of all branches"
and then adding all branches, without any exclusion this time")
worked as expected, but "--exclude=* --all --all" did not work the
same way, which has been fixed.
* ag/rev-parse-all-exclude-fix:
rev-parse: clear --exclude list after 'git rev-parse --all'
Commit [1] added the --exclude option to revision.c. The --all,
--branches, --tags, --remotes, and --glob options clear the exclude
list. Shortly therafter, commit [2] added the same to 'git rev-parse',
but without clearing the exclude list for the --all option.
[1] e7b432c52 ("revision: introduce --exclude=<glob> to tame wildcards", 2013-08-30)
[2] 9dc01bf06 ("rev-parse: introduce --exclude=<glob> to tame wildcards", 2013-11-01)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These methods are now declared in commit-reach.h. Remove them from
commit.h and add new include statements in all files that require these
declarations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse Y..." etc. misbehaved when given endpoints were
not committishes.
* en/rev-parse-invalid-range:
rev-parse: check lookup'ed commit references for NULL
Commits 2122f8b963 ("rev-parse: Add support for the ^! and ^@ syntax",
2008-07-26) and 3dd4e7320d ("Teach rev-parse the ... syntax.", 2006-07-04)
taught rev-parse new syntax, and used lookup_commit_reference() as part of
their logic. Neither usage checked the returned commit to see if it was
non-NULL before using it. Check for NULL and ensure an appropriate error
is reported to the user.
Reported by Florian Weimer and Todd Zullinger.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of is_repository_shallow
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the base_sha1 member of struct split_index to use struct
object_id and rename it base_oid. Include cache.h to make the structure
visible.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No caller passes anything but "0" for this parameter, which
requests that the function ignore it completely. In fact, in
all of history there was only one such caller, and it went
away in 7f51f8bc2b (alias: use run_command api to execute
aliases, 2011-01-07).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers of these functions just pass the hash member of a
struct object_id, so convert them to use a pointer to struct object_id
directly. Insert a check for NULL in expand_ref on a temporary basis;
this check can be removed when resolve_ref_unsafe is converted as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of "git rev-parse --parseopt" did not parse the
option specification that does not have the optional flags (*=?!)
correctly, which has been corrected.
* bc/rev-parse-parseopt-fix:
parse-options: only insert newline in help text if needed
parse-options: write blank line to correct output stream
t0040,t1502: Demonstrate parse_options bugs
git-rebase: don't ignore unexpected command line arguments
rev-parse parseopt: interpret any whitespace as start of help text
rev-parse parseopt: do not search help text for flag chars
t1502: demonstrate rev-parse --parseopt option mis-parsing
"git rev-parse" learned "--is-shallow-repository", that is to be
used in a way similar to existing "--is-bare-repository" and
friends.
* ow/rev-parse-is-shallow-repo:
rev-parse: rev-parse: add --is-shallow-repository
Running `git fetch --unshallow` on a repo that is not in fact shallow
produces a fatal error message. Add a helper to rev-parse that scripters
can use to determine whether a repo is shallow or not.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, rev-parse only interprets a space ' ' character as the
delimiter between the option spec and the help text. So if a tab
character is placed between the option spec and the help text, it will
be interpreted as part of the long option name or as part of the arg
hint. If it is interpreted as part of the long option name, then
rev-parse will produce what will be interpreted as multiple arguments
on the command line.
For example, the following option spec (note: there is a <tab> between
"frotz" and "enable"):
frotz enable frotzing
will produce the following set expression when --frotz is used:
set -- --frotz --
instead of this:
set -- --frotz enable --
Mark t1502.2 as fixed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
