Set up all the needed client parts of the 'bundle-uri' protocol v2
command, without actually doing anything with the bundle URIs.
If the server says it supports 'bundle-uri' teach Git to issue the
'bundle-uri' command after the 'ls-refs' during 'git clone'. The
returned key=value pairs are passed to the bundle list code which is
tested using a different ingest mechanism in t5750-bundle-uri-parse.sh.
At this point, Git does nothing with that bundle list. It will not
download any of the bundles. That will come in a later change after
these protocol bits are finalized.
The no-op client is initially used only by 'git clone' to test the basic
functionality, and eventually will bootstrap the initial download of Git
objects during a fresh clone. The bundle URI client will not be
integrated into other fetches until a mechanism is created to select a
subset of bundles for download.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some "simple" centralized workflows, users expect remote tracking
branch names to match local branch names. "git push" pushes to the
remote version/instance of the branch, and "git pull" pulls any changes
to the remote branch (changes made by the same user in another place, or
by other users).
This expectation is supported by the push.default default option "simple"
which refuses a default push for a mismatching tracking branch name, and
by the new branch.autosetupmerge option, "simple", which only sets up
remote tracking for same-name remote branches.
When a new branch has been created by the user and has not yet been
pushed (and push.default is not set to "current"), the user is prompted
with a "The current branch %s has no upstream branch" error, and
instructions on how to push and add tracking.
This error is helpful in that following the advice once per branch
"resolves" the issue for that branch forever, but inconvenient in that
for the "simple" centralized workflow, this is always the right thing to
do, so it would be better to just do it.
Support this workflow with a new config setting, push.autoSetupRemote,
which will cause a default push, when there is no remote tracking branch
configured, to push to the same-name on the remote and --set-upstream.
Also add a hint offering this new option when the "The current branch %s
has no upstream branch" error is encountered, and add corresponding tests.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch and transports the --refetch option to force a full fetch
without negotiating common commits with the remote. Use when applying a
new partial clone filter to refetch all matching objects.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in codepaths that use the "struct
transport_ls_refs_options" API. Since the introduction of the struct
in 39835409d1 (connect, transport: encapsulate arg in struct,
2021-02-05) the caller has been responsible for freeing it.
That commit in turn migrated code originally added in
402c47d939 (clone: send ref-prefixes when using protocol v2,
2018-07-20) and b4be74105f (ls-remote: pass ref prefixes when
requesting a remote's refs, 2018-03-15). Only some of those codepaths
were releasing the allocated resources of the struct, now all of them
will.
Mark the "t/t5511-refspec.sh" test as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target). Previously 24/47 tests would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching packfiles, we write a bunch of lockfiles for the packfiles
we're writing into the repository. In order to not leave behind any
cruft in case we exit or receive a signal, we register both an exit
handler as well as signal handlers for common signals like SIGINT. These
handlers will then unlink the locks and free the data structure tracking
them. We have observed a deadlock in this logic though:
(gdb) bt
#0 __lll_lock_wait_private () at ../sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:95
#1 0x00007f4932bea2cd in _int_free (av=0x7f4932f2eb20 <main_arena>, p=0x3e3e4200, have_lock=0) at malloc.c:3969
#2 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#3 0x0000000000662ab1 in string_list_clear ()
#4 0x000000000044f5bc in unlock_pack_on_signal ()
#5 <signal handler called>
#6 _int_free (av=0x7f4932f2eb20 <main_arena>, p=<optimized out>, have_lock=0) at malloc.c:4024
#7 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#8 0x000000000065afd5 in strbuf_release ()
#9 0x000000000066ddb9 in delete_tempfile ()
#10 0x0000000000610d0b in files_transaction_cleanup.isra ()
#11 0x0000000000611718 in files_transaction_abort ()
#12 0x000000000060d2ef in ref_transaction_abort ()
#13 0x000000000060d441 in ref_transaction_prepare ()
#14 0x000000000060e0b5 in ref_transaction_commit ()
#15 0x00000000004511c2 in fetch_and_consume_refs ()
#16 0x000000000045279a in cmd_fetch ()
#17 0x0000000000407c48 in handle_builtin ()
#18 0x0000000000408df2 in cmd_main ()
#19 0x00000000004078b5 in main ()
The process was killed with a signal, which caused the signal handler to
kick in and try free the data structures after we have unlinked the
locks. It then deadlocks while calling free(3P).
The root cause of this is that it is not allowed to call certain
functions in async-signal handlers, as specified by signal-safety(7).
Next to most I/O functions, this list of disallowed functions also
includes memory-handling functions like malloc(3P) and free(3P) because
they may not be reentrant. As a result, if we execute such functions in
the signal handler, then they may operate on inconistent state and fail
in unexpected ways.
Fix this bug by not calling non-async-signal-safe functions when running
in the signal handler. We're about to re-raise the signal anyway and
will thus exit, so it's not much of a problem to keep the string list of
lockfiles untouched. Note that it's fine though to call unlink(2), so
we'll still clean up the lockfiles correctly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move various *_INIT macros to use designated initializers. This helps
readability. I've only picked those leftover macros that were not
touched by another in-flight series of mine which changed others, but
also how initialization was done.
In the case of SUBMODULE_ALTERNATE_SETUP_INIT I've left an explicit
initialization of "error_mode", even though
SUBMODULE_ALTERNATE_ERROR_IGNORE itself is defined as "0". Let's not
peek under the hood and assume that enum fields we know the value of
will stay at "0".
The change to "TESTSUITE_INIT" in "t/helper/test-run-command.c" was
part of an earlier on-list version[1] of c90be786da (test-tool
run-command: fix flip-flop init pattern, 2021-09-11).
1. https://lore.kernel.org/git/patch-1.1-0aa4523ab6e-20210909T130849Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the packfile negotiation step within a Git fetch cannot be
done independent of sending the packfile, even though there is at least
one application wherein this is useful. Therefore, make it possible for
this negotiation step to be done independently. A subsequent commit will
use this for one such application - push negotiation.
This feature is for protocol v2 only. (An implementation for protocol v0
would require a separate implementation in the fetch, transport, and
transport helper code.)
In the protocol, the main hindrance towards independent negotiation is
that the server can unilaterally decide to send the packfile. This is
solved by a "wait-for-done" argument: the server will then wait for the
client to say "done". In practice, the client will never say it; instead
it will cease requests once it is satisfied.
In the client, the main change lies in the transport and transport
helper code. fetch_refs_via_pack() performs everything needed - protocol
version and capability checks, and the negotiation itself.
There are 2 code paths that do not go through fetch_refs_via_pack() that
needed to be individually excluded: the bundle transport (excluded
through requiring smart_options, which the bundle transport doesn't
support) and transport helpers that do not support takeover. If or when
we support independent negotiation for protocol v0, we will need to
modify these 2 code paths to support it. But for now, report failure if
independent negotiation is requested in these cases.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some scenarios, users may want more history than the repository
offered for cloning, which happens to be a shallow repository, can
give them. But because users don't know it is a shallow repository
until they download it to local, we may want to refuse to clone
this kind of repository, without creating any unnecessary files.
The '--depth=x' option cannot be used as a solution; the source may
be deep enough to give us 'x' commits when cloned, but the user may
later need to deepen the history to arbitrary depth.
Teach '--reject-shallow' option to "git clone" to abort as soon as
we find out that we are cloning from a shallow repository.
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach Git to use the "unborn" feature introduced in a previous patch as
follows: Git will always send the "unborn" argument if it is supported
by the server. During "git clone", if cloning an empty repository, Git
will use the new information to determine the local branch to create. In
all other cases, Git will ignore it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future patch we plan to return the name of an unborn current branch
from deep in the callchain to a caller via a new pointer parameter that
points at a variable in the caller when the caller calls
get_remote_refs() and transport_get_remote_refs().
In preparation for that, encapsulate the existing ref_prefixes
parameter into a struct. The aforementioned unborn current branch will
go into this new struct in the future patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added the necessary machinery to implement the
"--force-if-includes" protection, when "--force-with-lease" is used
without giving exact object the remote still ought to have. Surface
the feature by adding a command line option and a configuration
variable to enable it.
- Add a flag: "TRANSPORT_PUSH_FORCE_IF_INCLUDES" to indicate that the
new option was passed from the command line of via configuration
settings; update command line and configuration parsers to set the
new flag accordingly.
- Introduce a new configuration option "push.useForceIfIncludes", which
is equivalent to setting "--force-if-includes" in the command line.
- Update "remote-curl" to recognize and pass this option to "send-pack"
when enabled.
- Update "advise" to catch the reject reason "REJECT_REF_NEEDS_UPDATE",
set when the ref status is "REF_STATUS_REJECT_REMOTE_UPDATED" and
(optionally) print a help message when the push fails.
- The new option is a "no-op" in the following scenarios:
* When used without "--force-with-lease".
* When used with "--force-with-lease", and if the expected commit
on the remote side is specified as an argument.
Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to on-demand fetching code in lazily cloned repositories.
* jt/lazy-fetch:
fetch: no FETCH_HEAD display if --no-write-fetch-head
fetch-pack: remove no_dependents code
promisor-remote: lazy-fetch objects in subprocess
fetch-pack: do not lazy-fetch during ref iteration
fetch: only populate existing_refs if needed
fetch: avoid reading submodule config until needed
fetch: allow refspecs specified through stdin
negotiator/noop: add noop fetch negotiator
88e2f9ed8e ("introduce fetch-object: fetch one promisor object",
2017-12-05) plumbed through the from_promisor parameter but did
not document it everywhere it appeared. Add the documentation.
(It also plumbed through the no_dependents parameter, but I have left
that alone because it is being removed in a commit under review [1].)
[1] https://lore.kernel.org/git/e8f16d69089a5011c355d5939c56fa53b7a1eb2d.1597184949.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that Git has switched to using a subprocess to lazy-fetch missing
objects, remove the no_dependents code as it is no longer used.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
Whenever a fetch results in a packfile being downloaded, a .keep file is
generated, so that the packfile can be preserved (from, say, a running
"git repack") until refs are written referring to the contents of the
packfile.
In a subsequent patch, a successful fetch using protocol v2 may result
in more than one .keep file being generated. Therefore, teach
fetch_pack() and the transport mechanism to support multiple .keep
files.
Implementation notes:
- builtin/fetch-pack.c normally does not generate .keep files, and thus
is unaffected by this or future changes. However, it has an
undocumented "--lock-pack" feature, used by remote-curl.c when
implementing the "fetch" remote helper command. In keeping with the
remote helper protocol, only one "lock" line will ever be written;
the rest will result in warnings to stderr. However, in practice,
warnings will never be written because the remote-curl.c "fetch" is
only used for protocol v0/v1 (which will not generate multiple .keep
files). (Protocol v2 uses the "stateless-connect" command, not the
"fetch" command.)
- connected.c has an optimization in that connectivity checks on a ref
need not be done if the target object is in a pack known to be
self-contained and connected. If there are multiple packfiles, this
optimization can no longer be done.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When connecting to a remote system, we need to know what hash algorithm
it will be using to talk to us. Add a hash_algo member to struct
transport and add a function to read this data from the transport
object.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new method in transport-helper to reject all references if any
reference is failed for atomic push.
This method is reused in "send-pack.c" and "transport-helper.c", one for
SSH, git and file protocols, and the other for HTTP protocol.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing more than one reference with the --atomic option, the
server is supposed to perform a single atomic transaction to update the
references, leaving them either all to succeed or all to fail. This
works fine when pushing locally or over SSH, but when pushing over HTTP,
we fail to pass the atomic capability to the remote side. In fact, we
have not reported this capability to any remote helpers during the life
of the feature.
Now normally, things happen to work nevertheless, since we actually
check for most types of failures, such as non-fast-forward updates, on
the client side, and just abort the entire attempt. However, if the
server side reports a problem, such as the inability to lock a ref, the
transaction isn't atomic, because we haven't passed the appropriate
capability over and the remote side has no way of knowing that we wanted
atomic behavior.
Fix this by passing the option from the transport code through to remote
helpers, and from the HTTP remote helper down to send-pack. With this
change, we can detect if the server side rejects the push and report
back appropriately. Note the difference in the messages: the remote
side reports "atomic transaction failed", while our own checking rejects
pushes with the message "atomic push failed".
Document the atomic option in the remote helper documentation, so other
implementers can implement it if they like.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's nothing inherently transport-related about enumerating the
alternate ref tips. The code has lived in transport.[ch] because the
only use so far had been advertising available tips during transport.
But it could be used for more, and a future patch will teach rev-list to
access these refs.
Let's move it alongside the other alt-odb code, declaring it in
object-store.h with the implementation in sha1-file.c.
This lets us drop the inclusion of transport.h from receive-pack, which
perhaps shows how it was misplaced (though receive-pack is about
transporting objects, transport.h is mostly about the client side).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
note, there's still another hidden dependency related to this: even
though we pass a repo to transport_push() we still use
is_bare_repository() which pretty much assumes the_repository (and
some other global state).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
None of the current callers use the refname parameter we pass to their
callbacks. In theory somebody _could_ do so, but it's actually quite
weird if you think about it: it's a ref in somebody else's repository.
So the name has no meaning locally, and in fact there may be duplicates
if there are multiple alternates.
The users of this interface really only care about seeing some ref tips,
since that promises that the alternate has the full commit graph
reachable from there. So let's keep the information we pass back to the
bare minimum.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" sometimes failed to update the remote-tracking refs,
which has been corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: unify ref in and out param
"git fetch" learned a new option "--negotiation-tip" to limit the
set of commits it tells the other end as "have", to reduce wasted
bandwidth and cycles, which would be helpful when the receiving
repository has a lot of refs that have little to do with the
history at the remote it is fetching from.
* jt/fetch-nego-tip:
fetch-pack: support negotiation tip whitelist
When a user fetches:
- at least one up-to-date ref and at least one non-up-to-date ref,
- using HTTP with protocol v0 (or something else that uses the fetch
command of a remote helper)
some refs might not be updated after the fetch.
This bug was introduced in commit 989b8c4452 ("fetch-pack: put shallow
info in output parameter", 2018-06-28) which allowed transports to
report the refs that they have fetched in a new out-parameter
"fetched_refs". If they do so, transport_fetch_refs() makes this
information available to its caller.
Users of "fetched_refs" rely on the following 3 properties:
(1) it is the complete list of refs that was passed to
transport_fetch_refs(),
(2) it has shallow information (REF_STATUS_REJECT_SHALLOW set if
relevant), and
(3) it has updated OIDs if ref-in-want was used (introduced after
989b8c4452).
In an effort to satisfy (1), whenever transport_fetch_refs()
filters the refs sent to the transport, it re-adds the filtered refs to
whatever the transport supplies before returning it to the user.
However, the implementation in 989b8c4452 unconditionally re-adds the
filtered refs without checking if the transport refrained from reporting
anything in "fetched_refs" (which it is allowed to do), resulting in an
incomplete list, no longer satisfying (1).
An earlier effort to resolve this [1] solved the issue by readding the
filtered refs only if the transport did not refrain from reporting in
"fetched_refs", but after further discussion, it seems that the better
solution is to revert the API change that introduced "fetched_refs".
This API change was first suggested as part of a ref-in-want
implementation that allowed for ref patterns and, thus, there could be
drastic differences between the input refs and the refs actually fetched
[2]; we eventually decided to only allow exact ref names, but this API
change remained even though its necessity was decreased.
Therefore, revert this API change by reverting commit 989b8c4452, and
make receive_wanted_refs() update the OIDs in the sought array (like how
update_shallow() updates shallow information in the sought array)
instead. A test is also included to show that the user-visible bug
discussed at the beginning of this commit message no longer exists.
[1] https://public-inbox.org/git/20180801171806.GA122458@google.com/
[2] https://public-inbox.org/git/86a128c5fb710a41791e7183207c4d64889f9307.1485381677.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During negotiation, fetch-pack eventually reports as "have" lines all
commits reachable from all refs. Allow the user to restrict the commits
sent in this way by providing a whitelist of tips; only the tips
themselves and their ancestors will be sent.
Both globs and single objects are supported.
This feature is only supported for protocols that support connect or
stateless-connect (such as HTTP with protocol v2).
This will speed up negotiation when the repository has multiple
relatively independent branches (for example, when a repository
interacts with multiple repositories, such as with linux-next [1] and
torvalds/linux [2]), and the user knows which local branch is likely to
have commits in common with the upstream branch they are fetching.
[1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next/
[2] https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching, connectivity is checked after the shallow file is
updated. There are 2 issues with this: (1) the connectivity check is
only performed up to ancestors of existing refs (which is not thorough
enough if we were deepening an existing ref in the first place), and (2)
there is no rollback of the shallow file if the connectivity check
fails.
To solve (1), update the connectivity check to check the ancestry chain
completely in the case of a deepening fetch by refraining from passing
"--not --all" when invoking rev-list in connected.c.
To solve (2), have fetch_pack() perform its own connectivity check
before updating the shallow file. To support existing use cases in which
"git fetch-pack" is used to download objects without much regard as to
the connectivity of the resulting objects with respect to the existing
repository, the connectivity check is only done if necessary (that is,
the fetch is not a clone, and the fetch involves shallow/deepen
functionality). "git fetch" still performs its own connectivity check,
preserving correctness but sometimes performing redundant work. This
redundancy is mitigated by the fact that fetch_pack() reports if it has
performed a connectivity check itself, and if the transport supports
connect or stateless-connect, it will bubble up that report so that "git
fetch" knows not to perform the connectivity check in such a case.
This was noticed when a user tried to deepen an existing repository by
fetching with --no-shallow from a server that did not send all necessary
objects - the connectivity check as run by "git fetch" succeeded, but a
subsequent "git fsck" failed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the transport fetch method signature, by adding an output
parameter, to allow transports to return information about the refs they
have fetched. Then communicate shallow status information through this
mechanism instead of by modifying the input list of refs.
This does require clients to sometimes generate the ref map twice: once
from the list of refs provided by the remote (as is currently done) and
potentially once from the new list of refs that the fetch mechanism
provides.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
Remove 'transprot_verify_remote_names()' because all callers have
migrated to using 'struct refspec' which performs the same checks in
'parse_refspec()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert 'transport_push()' to take a 'struct refspec' as a
parameter instead of an array of strings which represent
refspecs.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
Teach ls-remote to optionally accept server options by specifying them
on the cmdline via '-o' or '--server-option'. These server options are
sent to the remote end when querying for the remote end's refs using
protocol version 2.
If communicating using a protocol other than v2 the provided options are
ignored and not sent to the remote end.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
Introduce the transport-helper capability 'stateless-connect'. This
capability indicates that the transport-helper can be requested to run
the 'stateless-connect' command which should attempt to make a
stateless connection with a remote end. Once established, the
connection can be used by the git client to communicate with
the remote end natively in a stateless-rpc manner as supported by
protocol v2. This means that the client must send everything the server
needs in a single request as the client must not assume any
state-storing on the part of the server or transport.
If a stateless connection cannot be established then the remote-helper
will respond in the same manner as the 'connect' command indicating that
the client should fallback to using the dumb remote-helper commands.
A future patch will implement the 'stateless-connect' capability in our
http remote-helper (remote-curl) so that protocol v2 can be used using
the http transport.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach transport_get_remote_refs() to accept a list of ref prefixes,
which will be sent to the server for use in filtering when using
protocol v2. (This list will be ignored when not using protocol v2.)
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
In preparation for implementing narrow/partial clone, the machinery
for checking object connectivity used by gc and fsck has been
taught that a missing object is OK when it is referenced by a
packfile specially marked as coming from trusted repository that
promises to make them available on-demand and lazily.
* jh/fsck-promisors:
gc: do not repack promisor packfiles
rev-list: support termination at promisor objects
sha1_file: support lazily fetching missing objects
introduce fetch-object: fetch one promisor object
index-pack: refactor writing of .keep files
fsck: support promisor objects as CLI argument
fsck: support referenced promisor objects
fsck: support refs pointing to promisor objects
fsck: introduce partialclone extension
extension.partialclone: introduce partial clone extension
Move the definition of the transport-specific functions provided by
transports, whether declared in transport.c or transport-helper.c, into
an internal header. This means that transport-using code (as opposed to
transport-declaring code) can no longer access these functions (without
importing the internal header themselves), making it clear that they
should use the transport_*() functions instead, and also allowing the
interface between the transport mechanism and an individual transport to
independently evolve.
This is superficially a reversal of commit 824d5776c3 ("Refactor
struct transport_ops inlined into struct transport", 2007-09-19).
However, the scope of the involved variables was neither affected nor
discussed in that commit, and I think that the advantages in making
those functions more private outweigh the advantages described in that
commit's commit message. A minor additional point is that the code has
gotten more complicated since then, in that the function-pointer
variables are potentially mutated twice (once initially and once if
transport_take_over() is invoked), increasing the value of corralling
them into their own struct.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit 0d0bac67ce ("transport: drop support for git-over-rsync",
2016-02-01), no transport in Git populates the "push" entry in the
transport vtable. Remove this entry.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce fetch-object, providing the ability to fetch one object from a
promisor remote.
This uses fetch-pack. To do this, the transport mechanism has been
updated with 2 flags, "from-promisor" to indicate that the resulting
pack comes from a promisor remote (and thus should be annotated as such
by index-pack), and "no-dependents" to indicate that only the objects
themselves need to be fetched (but fetching additional objects is
nevertheless safe).
Whenever "no-dependents" is used, fetch-pack will refrain from using any
object flags, because it is most likely invoked as part of a dynamic
object fetch by another Git command (which may itself use object flags).
An alternative to this is to leave fetch-pack alone, and instead update
the allocation of flags so that fetch-pack's flags never overlap with
any others, but this will end up shrinking the number of flags available
to nearly every other Git command (that is, every Git command that
accesses objects), so the approach in this commit was used instead.
This will be tested in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaking down the fields in the interface makes it easier to
change the backend of for_each_alternate_ref to something
that doesn't use "struct ref" internally.
The only field that callers actually look at is the oid,
anyway. The refname is kept in the interface as a plausible
thing for future code to want.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule push" learned "--recurse-submodules=only option to
push submodules out without pushing the top-level superproject.
* bw/push-submodule-only:
push: add option to push only submodules
submodules: add RECURSE_SUBMODULES_ONLY value
transport: reformat flag #defines to be more readable
Finer-grained control of what protocols are allowed for transports
during clone/fetch/push have been enabled via a new configuration
mechanism.
* bw/transport-protocol-policy:
http: respect protocol.*.allow=user for http-alternates
transport: add from_user parameter to is_transport_allowed
http: create function to get curl allowed protocols
transport: add protocol policy config option
http: always warn if libcurl version is too old
lib-proto-disable: variable name fix
Teach push the --recurse-submodules=only option. This enables push
to recursively push all unpushed submodules while leaving the
superproject unpushed.
This is a desirable feature in a scenario where updates to the
superproject are handled automatically by some other means, perhaps
a tool like Gerrit code review. In this scenario, a developer could
make a change which spans multiple submodules and then push their
commits for code review. Upon completion of the code review, their
commits can be accepted and applied to their respective submodules
while the code review tool can then automatically update the
superproject to the most recent SHA1 of each submodule. This would
reduce the merge conflicts in the superproject that could occur if
multiple people are contributing to the same submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the #defines for the TRANSPORT_* flags are hardcoded to be
powers of two. This can be error prone when adding a new flag and
is difficult to read. Update these defines to instead use a shift
operation to generate the flags and reformat them.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a from_user parameter to is_transport_allowed() to allow http to be
able to distinguish between protocol restrictions for redirects versus
initial requests. CURLOPT_REDIR_PROTOCOLS can now be set differently
from CURLOPT_PROTOCOLS to disallow use of protocols with the "user"
policy in redirects.
This change allows callers to query if a transport protocol is allowed,
given that the caller knows that the protocol is coming from the user
(1) or not from the user (0) such as redirects in libcurl. If unknown a
-1 should be provided which falls back to reading
`GIT_PROTOCOL_FROM_USER` to determine if the protocol came from the
user.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
