I noticed some unchecked writes. This fixes them.
* bundle.c (create_bundle): Die upon write failure.
* fast-import.c (keep_pack): Die upon write or close failure.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This updates send-pack and fast-import to use symbolic constants
for checking the return values from check_ref_format(), and also
futureproof the logic in lock_any_ref_for_update() to explicitly
name the case that is usually considered an error but is Ok for
this particular use.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The specialized pool allocator fast-import uses aligned objects on the
size of a pointer, which was not sufficient at least on Sparc. Instead,
make the alignment for objects of type unitmax_t.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-clean: honor core.excludesfile
Documentation: Fix man page breakage with DocBook XSL v1.72
git-remote.txt: fix typo
core-tutorial.txt: Fix argument mistake in an example.
replace reference to git-rm with git-reset in git-commit doc
Grammar fixes for gitattributes documentation
Don't allow fast-import tree delta chains to exceed maximum depth
revert/cherry-pick: allow starting from dirty work tree.
t/t3404: fix test for a bogus todo file.
Conflicts:
fast-import.c
Brian Downing noticed fast-import can produce tree depths of up
to 6,035 objects and even deeper. Long delta chains can create
very small packfiles but cause problems during repacking as git
needs to unpack each tree to count the reachable blobs.
What's happening here is the active branch cache isn't big enough.
We're swapping out the branch and thus recycling the tree information
(struct tree_content) back into the free pool. When we later reload
the tree we set the delta_depth to 0 but we kept the tree we just
reloaded as a delta base.
So if the tree we reloaded was already at the maximum depth we
wouldn't know it and make the new tree a delta. Multiply the
number of times the branch cache has to swap out the tree times
max_depth (10) and you get the maximum delta depth of a tree created
by fast-import. In Brian's case above the active branch cache had
to swap the branch out 603/604 times during this import to produce
a tree with a delta depth of 6035.
Acked-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this strbuf_detach(), it yields a double free later, the
command is in fact stashed, and this is not a memory leak.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Describe more 1.5.3.5 fixes in release notes
Fix diffcore-break total breakage
Fix directory scanner to correctly ignore files without d_type
Improve receive-pack error message about funny ref creation
fast-import: Fix argument order to die in file_change_m
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
gitk.txt: Fix markup.
send-pack: respect '+' on wildcard refspecs
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
git-gui: Don't crash when starting gitk from a browser session
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
git-gui: Avoid using bold text in entire gui for some fonts
The arguments to the "Not a blob" die call in file_change_m were
transposed, so that the command was printed as the type, and the type
as the command. Switch them around so that the error message comes
out correctly.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For that purpose, the ->buf is always initialized with a char * buf living
in the strbuf module. It is made a char * so that we can sloppily accept
things that perform: sb->buf[0] = '\0', and because you can't pass "" as an
initializer for ->buf without making gcc unhappy for very good reasons.
strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf
anymore.
as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying
->buf isn't an option anymore, if ->buf is going to escape from the scope,
and eventually be free'd.
API changes:
* strbuf_setlen now always works, so just make strbuf_reset a convenience
macro.
* strbuf_detatch takes a size_t* optional argument (meaning it can be
NULL) to copy the buffer's len, as it was needed for this refactor to
make the code more readable, and working like the callers.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the gain is not obvious in the diffstat, the resulting code is more
readable, _and_ in checkout-index/update-index we now reuse the same buffer
to unquote strings instead of always freeing/mallocing.
This also is more coherent with the next patch that reworks quoting
functions.
The quoting function is also made more efficient scanning for backslashes
and treating portions of strings without a backslash at once.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Add strbuf_remove, change strbuf_insert:
As both are special cases of strbuf_splice, implement them as such.
gcc is able to do the math and generate almost optimal code this way.
Add strbuf_swap:
Exchange the values of its arguments.
Use it in fast-import.c
Also fix spacing issues in strbuf.h
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Now that cmd_data acts on a strbuf, make last_object stashed buffer be a
strbuf as well. On new stash, don't free the last stashed buffer, rather
swap it with the one you will stash, this way, callers of store_object can
act on static strbufs, and at some point, fast-import won't allocate new
memory for objects buffers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_line is now strbuf_getline, and is a first class citizen, it returns 0
when reading a line worked, EOF else.
The ->eof marker was used non-locally by fast-import.c, mimic the same
behaviour using a static int in "read_next_command", that now returns -1 on
EOF, and avoids to call strbuf_getline when it's in EOF state.
Also no longer automagically strbuf_release the buffer, it's counter
intuitive and breaks fast-import in a very subtle way.
Note: being at EOF implies that command_buf.len == 0.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Add strbuf_rtrim to remove trailing spaces.
* Add strbuf_insert to insert data at a given position.
* Off-by one fix in strbuf_addf: strbuf_avail() does not counts the final
\0 so the overflow test for snprintf is the strict comparison. This is
not critical as the growth mechanism chosen will always allocate _more_
memory than asked, so the second test will not fail. It's some kind of
miracle though.
* Add size extension hints for strbuf_init and strbuf_read. If 0, default
applies, else:
+ initial buffer has the given size for strbuf_init.
+ first growth checks it has at least this size rather than the
default 8192.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch features the use of strbuf_detach, and prevent the programmer
to mess with allocation directly. The code is as efficent as before, just
more concise and more straightforward.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gory details are explained in strbuf.h. The change of semantics this
patch enforces is that the embeded buffer has always a '\0' character after
its last byte, to always make it a C-string. The offs-by-one changes are all
related to that very change.
A strbuf can be used to store byte arrays, or as an extended string
library. The `buf' member can be passed to any C legacy string function,
because strbuf operations always ensure there is a terminating \0 at the end
of the buffer, not accounted in the `len' field of the structure.
A strbuf can be used to generate a string/buffer whose final size is not
really known, and then "strbuf_detach" can be used to get the built buffer,
and keep the wrapping "strbuf" structure usable for further work again.
Other interesting feature: strbuf_grow(sb, size) ensure that there is
enough allocated space in `sb' to put `size' new octets of data in the
buffer. It helps avoiding reallocating data for nothing when the problem the
strbuf helps to solve has a known typical size.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[sp: minor change to use fputs, thus reducing the patch size]
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* skip_optional_lf() decl is old-style -- please say
static skip_optional_lf(void)
{
...
}
* t9300 #14 fails, like this:
* expecting failure: git-fast-import <input
fatal: Branch name doesn't conform to GIT standards: .badbranchname
fast-import: dumping crash report to .git/fast_import_crash_14354
./test-lib.sh: line 143: 14354 Segmentation fault git-fast-import <input
-- >8 --
Subject: [PATCH] fastimport: Fix re-use of va_list
The va_list is designed to be used only once. The current code
reuses va_list argument may cause segmentation fault. Copy and
release the arguments to avoid this problem.
While we are at it, fix old-style function declaration of
skip_optional_lf().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we crash the frontend developer (or end-user) may need to know
roughly around what part of the input stream we had a problem with
and aborted on. Because line numbers aren't very useful in this
sort of application we instead just keep the last 100 commands in
a FIFO queue and print them as part of the crash report.
Currently one problem with this design is a commit that has
more than 100 modified files in it will flood the FIFO and any
context regarding branch/from/committer/mark/comments will be lost.
We really should save only the last few (10?) file changes for the
current commit, ensuring we have some prior higher level commands
in the FIFO when we crash on a file M/D/C/R command.
Another issue with this approach is the FIFO only includes the
commands, it does not include the commit messages. Yet having a
commit message may be useful to help locate the relevant change in
the source material. In practice I don't think this is going to be a
major concern as the frontend can always embed its own source change
set identifier as a comment (which will appear in the crash report)
and the commit message(s) for the most recent commits of any given
branch should be obtainable from the (packed) commit objects.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As fast-import is quite strict about its input and die()'s anytime
something goes wrong it can be difficult for a frontend developer
to troubleshoot why fast-import rejected their input, or to even
determine what input command it rejected.
This change introduces a custom handler for Git's die() routine.
When we receive a die() for any reason (fast-import or a lower level
core Git routine we called) the error is first dumped onto stderr
and then a more extensive crash report file is prepared in GIT_DIR.
Finally we exit the process with status 128, just like the stock
builtin die handler.
An internal flag is set to prevent any further die()'s that may be
invoked during the crash report generator from causing us to enter
into an infinite loop. We shouldn't die() from our crash report
handler, but just in case someone makes a future code change we are
prepared to gaurd against small mistakes turning into huge problems
for the end-user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The existing checkpoint command is very useful to force fast-import
to dump the branches out to disk so that standard Git tools can
access them and the objects they refer to. However there was not a
way to know when fast-import had finished executing the checkpoint
and it was safe to read those refs.
The progress command can be used to make fast-import output any
message of the frontend's choosing to standard out. The frontend
can scan for these messages using select() or poll() to monitor a
pipe connected to the standard output of fast-import.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For the same reasons as the prior change we want to allow frontends
to omit the trailing LF that usually delimits commands. In some
cases these just make the input stream more verbose looking than
it needs to be, and its just simpler for the frontend developer to
get started if our parser is slightly more lenient about where an
LF is required and where it isn't.
To make this optional LF feature work we now have to buffer up to one
line of input in command_buf. This buffering can happen if we look
at the current input command but don't recognize it at this point
in the code. In such a case we need to "unget" the entire line,
but we cannot depend upon the stdio library to let us do ungetc()
for that many characters at once.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A few fast-import frontend developers have found it odd that we
require the LF following a `data` command, especially in the exact
byte count format. Technically we don't need this LF to parse
the stream properly, but having it here does make the stream more
readable to humans. We can easily make the LF optional by peeking
at the next byte available from the stream and pushing it back into
the buffer if its not LF.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Several frontend developers have asked that some form of stream
comments be permitted within a fast-import data stream. This way
they can include information from their own frontend program about
where specific data was taken from in the source system, or about
a decision that their frontend may have made while creating the
fast-import data stream.
This change introduces comments in the Bourne-shell/Tcl/Perl style.
Lines starting with '#' are ignored, up to and including the LF.
Unlike the above mentioned three languages however we do not look for
and ignore leading whitespace. This just simplifies the definition
of the comment format and the code that parses them.
To make comments work we had to stop using read_next_command() within
cmd_data() and directly invoke read_line() during the inline variant
of the function. This is necessary to retain any lines of the
input data that might otherwise look like a comment to fast-import.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of growing our buffer by hand during the inline variant of
cmd_data() we can save a few lines of code and just use the nifty
new ALLOC_GROW macro already available to us.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michael Haggerty <mhagger@alum.mit.edu> noticed while debugging a
Git backend for cvs2svn that fast-import was barfing when he tried
to use "TAG_FIXUP" as a branch name for temporary work needed to
cleanup the tree prior to creating an annotated tag object.
The reason we were rejecting the branch name was check_ref_format()
returns -2 when there are less than 2 '/' characters in the input
name. TAG_FIXUP has 0 '/' characters, but is technically just as
valid of a ref as HEAD and MERGE_HEAD, so we really should permit it
(and any other similar looking name) during import.
New test cases have been added to make sure we still detect very
wrong branch names (e.g. containing [ or starting with .) and yet
still permit reasonable names (e.g. TAG_FIXUP).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Something probably assumed that HT indentation is 4 characters.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
xmkstemp() performs error checking and prints a standard error message when
an error occur.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some source material (e.g. Subversion dump files) perform directory
renames by telling us the directory was copied, then deleted in the
same revision. This makes it difficult for a frontend to convert
such data formats to a fast-import stream, as all the frontend has
on hand is "Copy a/ to b/; Delete a/" with no details about what
files are in a/, unless the frontend also kept track of all files.
The new 'C' subcommand within a commit allows the frontend to make a
recursive copy of one path to another path within the branch, without
needing to keep track of the individual file paths. The metadata
copy is performed in memory efficiently, but is implemented as a
copy-immediately operation, rather than copy-on-write.
With this new 'C' subcommand frontends could obviously implement an
'R' (rename) on their own as a combination of 'C' and 'D' (delete),
but since we have already offered up 'R' in the past and it is a
trivial thing to keep implemented I'm not going to deprecate it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some source material (e.g. Subversion dump files) perform directory
renames without telling us exactly which files in that subdirectory
were moved. This makes it hard for a frontend to convert such data
formats to a fast-import stream, as all the frontend has on hand
is "Rename a/ to b/" with no details about what files are in a/,
unless the frontend also kept track of all files.
The new 'R' subcommand within a commit allows the frontend to
rename either a file or an entire subdirectory, without needing to
know the object's SHA-1 or the specific files contained within it.
The rename is performed as efficiently as possible internally,
making it cheaper than a 'D'/'M' pair for a file rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When e8438420bb allowed us to reload
the marks table on subsequent runs of fast-import we really broke
things, as we set pack_id to MAX_PACK_ID for any objects we imported
into the marks table. Creating a branch from that mark should fail
as we attempt to read the object through a non-existant packed_git
pointer. Instead we have to use the normal Git object system to
locate the older commit, as we ourselves do not have a reference
to the packed_git it resides in.
This bug only occurred because t9300 was not complete enough.
When we added the --import-marks feature we didn't actually test
its implementation enough to verify the function worked as intended.
I have corrected that, and included the changes as part of this fix.
Prior versions of fast-import fail the new test(s); this commit
allows them to pass.
Credit for this bug find goes to Simon Hausmann <simon@lst.de> as
he recently identified a similiar bug in the tree lazy-loading path.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To resolve a corner case uncovered by Simon Hausmann I need to
reuse the logic for the SHA-1 expression version of the 'from '
command within the mark version of the 'from ' command. This change
doesn't alter any functionality, but is merely breaking the common
code out to a function that I can reuse.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Commit a5c1780a03 sets the pack_id of existing
objects to MAX_PACK_ID. When the same object is referenced later again it is
found in the local object hash. With such a pack_id fast-import should not try
to locate that object in the newly created pack(s).
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix uninitialized last_object->no_free variable that is accessed in
store_object.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-checkout is also adapted to make use of this new option
instead of the handcrafted command sequence.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Include a generalized fixup_pack_header_footer() in this new file.
Needed by git-repack --max-pack-size feature in a later patchset.
[sp: Moved close(pack_fd) to callers, to support index-pack, and
changed name to better indicate it is for packfiles.]
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
http.c: Fix problem with repeated calls of http_init
Add missing reference to GIT_COMMITTER_DATE in git-commit-tree documentation
Fix import-tars fix.
Update .mailmap with "Michael"
Do not barf on too long action description
Catch empty pathnames in trees during fsck
Don't allow empty pathnames in fast-import
import-tars: be nice to wrong directory modes
git-svn: Added 'find-rev' command
git shortlog documentation: add long options and fix a typo
riddochc on #git noticed corruption caused by import-tars. This
was fixed in the prior commit by Dscho, but fast-import was wrong
to have allowed a tree to be created with an empty string as the
filename. No operating system allows this, and Git itself doesn't
accept this into the index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some users of fast-import have been trying to use it to rewrite
commits and trees, an activity where the all of the relevant blobs
are already available from the existing packfiles. In such a case
we don't want to repack a blob, even if the frontend application
has supplied us the raw data rather than a mark or a SHA-1 name.
I'm intentionally only checking the packfiles that existed when
fast-import started and am always ignoring all loose object files.
We ignore loose objects because fast-import tends to operate on a
very large number of objects in a very short timespan, and it is
usually creating new objects, not reusing existing ones. In such
a situtation the majority of the objects will not be found in the
existing packfiles, nor will they be loose object files. If the
frontend application really wants us to look at loose object files,
then they can just repack the repository before running fast-import.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This fixes a problem reported by Randal Schwartz:
>I finally tracked down all the (albeit inconsequential) errors I was getting
>on both OpenBSD and OSX. It's the warn() function in usage.c. There's
>warn(3) in BSD-style distros. It'd take a "great rename" to change it, but if
>someone with better C skills than I have could do that, my linker and I would
>appreciate it.
It was annoying to me, too, when I was doing some mergetool testing on
Mac OS X, so here's a fix.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Randal L. Schwartz" <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When some operations are interrupted (or "die()'d" or crashed) then the
partial object/pack/index file may remain around. Make it more obvious
in their name that those files are temporary stuff and can be cleaned up
if no operation is in progress.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jeff King pointed out that these casts are quite unnecessary, as
the compiler should be doing them anyway, and may cause problems
in the future if the size of the argument for to_atom were to ever
be increased.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When building up a tree for a commit, fast-import
dynamically allocates memory for the tree entries. When more
space is needed, the allocated memory is increased by a
constant amount. For very large trees, this means
re-allocating and memcpy()ing the memory O(n) times.
To compound this problem, releasing the previous tree
resource does not free the memory; it is kept in a pool
for future trees. This means that each of the O(n)
allocations will consume increasing amounts of memory,
giving O(n^2) memory consumption.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'master' of git://repo.or.cz/git/fastimport:
Allow fast-import frontends to reload the marks table
Use atomic updates to the fast-import mark file
Preallocate memory earlier in fast-import
