When the test naming convention was documented[1] the commit script
was not renamed.
The test description for t7502 indicates that the test file is to
contain porcelain type options for the commit command.
The tests don't fall into a single category. There are tests for
cleanup, sign-off, multiple message options, etc.
Rename the t7502-commit.sh to t7502-commit-porcelain.sh which reflects
the high level nature and usage of the options to commit.
[1] f50c9f76c ("Rename some test scripts and describe the naming convention", 2005-05-15)
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename test and update the test description to explicitly state that
included tests all relate to commit authorship. The t7509-commit.sh
file was not renamed when other scripts were updated in compliance
with the test naming convention.
[1] f50c9f76c ("Rename some test scripts and describe the naming convention", 2005-05-15)
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an earlier patch some tests scripts were renamed and a naming
convention was documented. [1]
Merge t2000-checkout-cache-clash.sh and t2001-checkout-cache-clash.sh into
t2000-conflict-when-checking-files-out.sh.
[1] f50c9f76c ("Rename some test scripts and describe the naming convention", 2005-05-15)
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --exclude-promisor-objects option causes some funny behavior in at
least two commands: log and blame. It causes a BUG crash:
$ git log --exclude-promisor-objects
BUG: revision.c:2143: exclude_promisor_objects can only be used
when fetch_if_missing is 0
Aborted
[134]
Fix this such that the option is treated like any other unknown option.
The commands that must support it are limited, so declare in those
commands that the flag is supported. In particular:
pack-objects
prune
rev-list
The commands were found by searching for logic which parses
--exclude-promisor-objects outside of revision.c. Extra logic outside of
revision.c is needed because fetch_if_missing must be turned on before
revision.c sees the option or it will BUG-crash. The above list is
supported by the fact that no other command is introspectively invoked
by another command passing --exclude-promisor-object.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support processing VALIDSIG status that provides additional information
for valid signatures. Use this information to propagate signing key
fingerprint and expose it via %GF pretty format. This format can be
used to build safer key verification systems that verify the key via
complete fingerprint rather than short/long identifier provided by %GK.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config settings are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present and there is only one worktree so that it
works in any both single and multiple worktree setups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many config-related tests it's common to check if a config variable
has expected value and we want to print the differences when the test
fails. Doing it the normal way is three lines of shell code. Let's add
a function do to all this (and a little more).
This function has uses outside t1300 as well but I'm not going to
convert them all. And it will be used in the next commit where
per-worktree config feature is introduced.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GnuPG supports creating signatures consisting of multiple signature
packets. If such a signature is verified, it outputs all the status
messages for each signature separately. However, git currently does not
account for such scenario and gets terribly confused over getting
multiple *SIG statuses.
For example, if a malicious party alters a signed commit and appends
a new untrusted signature, git is going to ignore the original bad
signature and report untrusted commit instead. However, %GK and %GS
format strings may still expand to the data corresponding
to the original signature, potentially tricking the scripts into
trusting the malicious commit.
Given that the use of multiple signatures is quite rare, git does not
support creating them without jumping through a few hoops, and finally
supporting them properly would require extensive API improvement, it
seems reasonable to just reject them at the moment.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git diff can be invoked with absolute paths. Typically, this triggers
the --no-index case. Then the absolute paths remain in the file names
that are printed in the output.
There is one peculiarity, though: When the command is invoked from a
a sub-directory in a repository, then it is attempted to strip the
sub-directory from the beginning of relative paths. Yet, to detect a
relative path the code just checks for an initial forward slash.
This mistakes a Windows style path like "D:/base" as a relative path
and the output looks like this, for example:
D:\dir\test\one>git -P diff --numstat D:\dir\base D:\dir\diff
1 1 ir/{base => diff}/1.txt
where the correct output should be
D:\dir\test\one>git -P diff --numstat D:\dir\base D:\dir\diff
1 1 D:/dir/{base => diff}/1.txt
If the sub-directory where 'git diff' is invoked is sufficiently deep
that the prefix becomes longer than the path to be printed, then the
subsequent code accesses the path out of bounds.
Use is_absolute_path() to detect Windows style absolute paths.
One might wonder whether the check for a directory separator that
is visible in the patch context should be changed from == '/' to
is_dir_sep() or not. It turns out not to be necessary. That code
only ever investigates paths that have undergone pathspec
normalization, after which there are only forward slashes even on
Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of receive.denyCurrentBranch=updateInstead was added to
a switch statement that handles other values of the variable, but
all the other case arms only checked a condition to reject the
attempted push, or let later logic in the same function to still
intervene, so that a push that does not fast-forward (which is
checked after the switch statement in question) is still rejected.
But the handling of updateInstead incorrectly took immediate effect,
without giving other checks a chance to intervene.
Instead of calling update_worktree() that causes the side effect
immediately, just note the fact that we will need to call the
function later, and first give other checks a chance to reject the
request. After the update-hook gets a chance to reject the push
(which happens as the last step in a series of checks), call
update_worktree() when we earlier detected the need to.
Reported-by: Rajesh Madamanchi
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9ac3f0e5b3 (pack-objects: fix performance issues on packing large
deltas, 2018-07-22), a mutex was introduced that is used to guard the
call to set the delta size. This commit even added code to initialize
it, but at an incorrect spot: in `init_threaded_search()`, while the
call to `oe_set_delta_size()` (and hence to `packing_data_lock()`) can
happen in the call chain `check_object()` <- `get_object_details()` <-
`prepare_pack()` <- `cmd_pack_objects()`, which is long before the
`prepare_pack()` function calls `ll_find_deltas()` (which initializes
the threaded search).
Another tell-tale that the mutex was initialized in an incorrect spot is
that the function to initialize it lives in builtin/, while the code
that uses the mutex is defined in a libgit.a header file.
Let's use a more appropriate function: `prepare_packing_data()`, which
not only lives in libgit.a, but *has* to be called before the
`packing_data` struct is used that contains that mutex.
This fixes https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a problem in the way 9ac3f0e5b3 (pack-objects: fix
performance issues on packing large deltas, 2018-07-22) initializes that
mutex in the `packing_data` struct. The problem manifests in a
segmentation fault on Windows, when a mutex (AKA critical section) is
accessed without being initialized. (With pthreads, you apparently do
not really have to initialize them?)
This was reported in https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a partial clone that will lazily be hydrated from the
originating repository, we generally want to avoid "does this
object exist (locally)?" on objects that we deliberately omitted
when we created the clone. The cache-tree codepath (which is used
to write a tree object out of the index) however insisted that the
object exists, even for paths that are outside of the partial
checkout area. The code has been updated to avoid such a check.
* jt/cache-tree-allow-missing-object-in-partial-clone:
cache-tree: skip some blob checks in partial clone
When pushing into a repository that borrows its objects from an
alternate object store, "git receive-pack" that responds to the
push request on the other side lists the tips of refs in the
alternate to reduce the amount of objects transferred. This
sometimes is detrimental when the number of refs in the alternate
is absurdly large, in which case the bandwidth saved in potentially
fewer objects transferred is wasted in excessively large ref
advertisement. The alternate refs that are advertised are now
configurable with a pair of configuration variables.
* tb/filter-alternate-refs:
transport.c: introduce core.alternateRefsPrefixes
transport.c: introduce core.alternateRefsCommand
transport.c: extract 'fill_alternate_refs_command'
transport: drop refnames from for_each_alternate_ref
Over some transports, fetching objects with an exact commit object
name can be done without first seeing the ref advertisements. The
code has been optimized to exploit this.
* jt/avoid-ls-refs:
fetch: do not list refs if fetching only hashes
transport: list refs before fetch if necessary
transport: do not list refs if possible
transport: allow skipping of ref listing
A partial clone that is configured to lazily fetch missing objects
will on-demand issue a "git fetch" request to the originating
repository to fill not-yet-obtained objects. The request has been
optimized for requesting a tree object (and not the leaf blob
objects contained in it) by telling the originating repository that
no blobs are needed.
* jt/non-blob-lazy-fetch:
fetch-pack: exclude blobs when lazy-fetching trees
fetch-pack: avoid object flags if no_dependents
Unlike "grep", "git grep" by default recurses to the whole tree.
The command learned "git grep --recursive" option, so that "git
grep --no-recursive" can serve as a synonym to setting the
max-depth to 0.
* rs/grep-no-recursive:
grep: add -r/--[no-]recursive
"git help -a" and "git help -av" give different pieces of
information, and generally the "verbose" version is more friendly
to the new users. "git help -a" by default now uses the more
verbose output (with "--no-verbose", you can go back to the
original). Also "git help -av" now lists aliases and external
commands, which it did not used to.
* nd/help-commands-verbose-by-default:
help -a: improve and make --verbose default
"git fetch $repo $object" in a partial clone did not correctly
fetch the asked-for object that is referenced by an object in
promisor packfile, which has been fixed.
* jt/fetch-tips-in-partial-clone:
fetch: in partial clone, check presence of targets
connected: document connectivity in partial clones
A new extension to the index file has been introduced, which allows
the file to be read in parallel.
* bp/read-cache-parallel:
read-cache: load cache entries on worker threads
ieot: add Index Entry Offset Table (IEOT) extension
read-cache: load cache extensions on a worker thread
config: add new index.threads config setting
eoie: add End of Index Entry (EOIE) extension
read-cache: clean up casting and byte decoding
read-cache.c: optimize reading index format v4
Some environment variables that control the runtime options of Git
used during tests are getting renamed for consistency.
* bp/rename-test-env-var:
t0000: do not get self-test disrupted by environment warnings
preload-index: update GIT_FORCE_PRELOAD_TEST support
read-cache: update TEST_GIT_INDEX_VERSION support
fsmonitor: update GIT_TEST_FSMONITOR support
preload-index: use git_env_bool() not getenv() for customization
t/README: correct spelling of "uncommon"
Code clean-up in the internal machinery used by "git status" and
"git commit --dry-run".
* ss/wt-status-committable:
roll wt_status_state into wt_status and populate in the collect phase
wt-status.c: set the committable flag in the collect phase
t7501: add test of "commit --dry-run --short"
wt-status: rename commitable to committable
wt-status.c: move has_unmerged earlier in the file
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
Suppose a server has the following commit graph:
A B
\ /
O
We create a client by cloning A from the server with depth 1, and add
many commits to it (so that future fetches span multiple requests due to
lengthy negotiation). If it then fetches B using protocol v2, the fetch
spanning multiple requests, the resulting packfile does not contain O
even though the client did report that A is shallow.
This is because upload_pack_v2() can be called multiple times while
processing the same session. During the 2nd and all subsequent
invocations, some object flags remain from the previous invocations. In
particular, CLIENT_SHALLOW remains, preventing process_shallow() from
adding client-reported shallows to the "shallows" array, and hence
pack-objects not knowing about these client-reported shallows.
Therefore, teach upload_pack_v2() to clear object flags at the start of
each invocation. This has some other results:
- THEY_HAVE gates addition of objects to have_obj in process_haves().
Previously in upload_pack_v2(), have_obj needed to be static because
once an object is added to have_obj, it is never readded and thus we
needed to retain the contents of have_obj between invocations. Now
that flags are cleared, this is no longer necessary. This patch does
not change the behavior of ok_to_give_up() (THEY_HAVE is still set on
each "have") and got_oid() (used only in non-v2)); THEY_HAVE is not
used in any other function.
- WANTED gates addition of objects to want_obj in parse_want() and
parse_want_ref(). It is also used in receive_needs(), but that is
only used in non-v2. For the same reasons as THEY_HAVE, want_obj no
longer needs to be static in upload_pack_v2().
- CLIENT_SHALLOW is changed as discussed above.
Clearing of the other 5 flags does not affect functionality in v2. (Note
that in non-v2, upload_pack() is only called once per process, so each
invocation starts with blank flags anyway.)
- OUR_REF is only used in non-v2.
- COMMON_KNOWN is only used as a scratch flag in ok_to_give_up().
- SHALLOW is passed to invocations in deepen() and
deepen_by_rev_list(), but upload-pack doesn't use it.
- NOT_SHALLOW is used by send_shallow() and send_unshallow(), but
invocations of those functions are always preceded by code that sets
NOT_SHALLOW on the appropriate objects.
- HIDDEN_REF is only used in non-v2.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to load unmerged entries from HEAD into the index at stage 2 and
from MERGE_HEAD into stage 3. Similarly, folks expect merge conflicts
to look like
<<<<<<<< HEAD
content from our side
========
content from their side
>>>>>>>> MERGE_HEAD
not
<<<<<<<< MERGE_HEAD
content from their side
========
content from our side
>>>>>>>> HEAD
The correct order usually comes naturally and for free, but with renames
we often have data in the form {rename_branch, other_branch}, and
working relative to the rename first (e.g. for rename/add) is more
convenient elsewhere in the code. Address the slight impedance
mismatch by having some functions re-call themselves with flipped
arguments when the branch order is reversed.
Note that setup_rename_conflict_info() has one asymmetry in it, in
setting dst_entry1->processed=0 but not doing similarly for
dst_entry2->processed. When dealing with rename/rename and similar
conflicts, we do not want the processing to happen twice, so the
desire to only set one of the entries to unprocessed is intentional.
So, while this change modifies which branch's entry will be marked as
unprocessed, that dovetails nicely with putting HEAD first so that we
get the index stage entries and conflict markers in the right order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tree:0 filter does not need to traverse the trees that it has
filtered out, so optimize list-objects and list-objects-filter to skip
traversing the trees entirely. Before this patch, we iterated over all
children of the tree, and did nothing for all of them, which was
wasteful.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before we switched to one big test-tool binary, if you
forgot the name of a tool, you could use tab-completion in
the shell to get a hint. But these days, all you get is:
$ t/helper/test-tool approxidate
fatal: There is no test named 'approxidate'
and you're stuck reading the source code to find it. Let's
print a list of the available tools in this case.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule helper update_clone called by "git submodule update",
clones submodules if needed. As submodules used to have the URL indicating
if they were active, the step to resolve relative URLs was done in the
"submodule init" step. Nowadays submodules can be configured active without
calling an explicit init, e.g. via configuring submodule.active.
When trying to obtain submodules that are set active this way, we'll
fallback to the URL found in the .gitmodules, which may be relative to the
superproject, but we do not resolve it, yet:
git clone https://gerrit.googlesource.com/gerrit
cd gerrit && grep url .gitmodules
url = ../plugins/codemirror-editor
...
git config submodule.active .
git submodule update
fatal: repository '../plugins/codemirror-editor' does not exist
fatal: clone of '../plugins/codemirror-editor' into submodule path '/tmp/gerrit/plugins/codemirror-editor' failed
Failed to clone 'plugins/codemirror-editor'. Retry scheduled
[...]
fatal: clone of '../plugins/codemirror-editor' into submodule path '/tmp/gerrit/plugins/codemirror-editor' failed
Failed to clone 'plugins/codemirror-editor' a second time, aborting
[...]
To resolve the issue, factor out the function that resolves the relative
URLs in "git submodule init" (in the submodule helper in the init_submodule
function) and call it at the appropriate place in the update_clone helper.
Reported-by: Jaewoong Jung <jungjw@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code in "git status" sometimes hit an assertion failure. This
was caused by a structure that was reused without cleaning the data
used for the first run, which has been corrected.
* en/status-multiple-renames-to-the-same-target-fix:
commit: fix erroneous BUG, 'multiple renames on the same target? how?'
"gc --auto" ended up calling exit(-1) upon error, which has been
corrected to use exit(1). Also the error reporting behaviour when
daemonized has been updated to exit with zero status when stopping
due to a previously discovered error (which implies there is no
point running gc to improve the situation); we used to exit with
failure in such a case.
* jn/gc-auto:
gc: do not return error for prior errors in daemonized mode
Various test scripts have been updated for style and also correct
handling of exit status of various commands.
* md/test-cleanup:
tests: order arguments to git-rev-list properly
t9109: don't swallow Git errors upstream of pipes
tests: don't swallow Git errors upstream of pipes
t/*: fix ordering of expected/observed arguments
tests: standardize pipe placement
Documentation: add shell guidelines
t/README: reformat Do, Don't, Keep in mind lists
An alias that expands to another alias has so far been forbidden,
but now it is allowed to create such an alias.
* ts/alias-of-alias:
t0014: introduce an alias testing suite
alias: show the call history when an alias is looping
alias: add support for aliases of an alias
The recently introduced commit-graph auxiliary data is incompatible
with mechanisms such as replace & grafts that "breaks" immutable
nature of the object reference relationship. Disable optimizations
based on its use (and updating existing commit-graph) when these
incompatible features are in use in the repository.
* ds/commit-graph-with-grafts:
commit-graph: close_commit_graph before shallow walk
commit-graph: not compatible with uninitialized repo
commit-graph: not compatible with grafts
commit-graph: not compatible with replace objects
test-repository: properly init repo
commit-graph: update design document
refs.c: upgrade for_each_replace_ref to be a each_repo_ref_fn callback
refs.c: migrate internal ref iteration to pass thru repository argument
Generation of (experimental) commit-graph files have so far been
fairly silent, even though it takes noticeable amount of time in a
meaningfully large repository. The users will now see progress
output.
* ab/commit-graph-progress:
gc: fix regression in 7b0f229222 impacting --quiet
commit-graph verify: add progress output
commit-graph write: add progress output
The previous git-p4 unshelve support would check for changes
in Perforce to the files being unshelved since the original
shelve, and would complain if any were found.
This was to ensure that the user wouldn't end up with both the
shelved change delta, and some deltas from other changes in their
git commit.
e.g. given fileA:
the
quick
brown
fox
change1: s/the/The/ <- p4 shelve this change
change2: s/fox/Fox/ <- p4 submit this change
git p4 unshelve 1 <- FAIL
This change teaches the P4Unshelve class to always create a parent
commit which matches the P4 tree (for the files being unshelved) at
the point prior to the P4 shelve being created (which is reported
in the p4 description for a shelved changelist).
That then means git-p4 can always create a git commit matching the
P4 shelve that was originally created, without any extra deltas.
The user might still need to use the --origin option though - there
is no way for git-p4 to work out the versions of all of the other
*unchanged* files in the shelve, since this information is not recorded
by Perforce.
Additionally this fixes handling of shelved 'move' operations.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch detection code looks for branches under refs/remotes/p4/...
and can end up getting confused if there are unshelved changes in
there as well. This happens in the function p4BranchesInGit().
Instead, put the unshelved changes into refs/remotes/p4-unshelved/<N>.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few trivial updates to test to match the current best practices.
- avoid "grep -q" that strips potentially useful output from tests
running under "-v".
- use test_write_lines to prepare multi-line expected output file.
- reserve use of test_must_fail to "git" commands.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'edit' command can be used to cherry-pick a commit and then
immediately drop out of the interactive rebase, with exit code 0, to let
the user amend the commit, or test it, or look around.
Sometimes this functionality would come in handy *without*
cherry-picking a commit, e.g. to interrupt the interactive rebase even
before cherry-picking a commit, or immediately after an 'exec' or a
'merge'.
This commit introduces that functionality, as the spanking new 'break'
command.
Suggested-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For octopus merges where the first parent edge immediately merges into
the next column to the left, the number of columns should be one less
than the usual case.
First parent to the left case:
| *-.
| |\ \
|/ / /
The usual case:
| *-.
| |\ \
| | | *
Also refactor the code to iterate over columns rather than dashes,
building from an initial patch suggested by Jeff King.
Signed-off-by: Noam Postavsky <npostavs@users.sourceforge.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the split index feature was introduced [1], refreshing a
split index is prone to a variant of the classic racy git problem.
Consider the following sequence of commands updating the split index
when the shared index contains a racily clean cache entry, i.e. an
entry whose cached stat data matches with the corresponding file in
the worktree and the cached mtime matches that of the index:
echo "cached content" >file
git update-index --split-index --add file
echo "dirty worktree" >file # size stays the same!
# ... wait ...
git update-index --add other-file
Normally, when a non-split index is updated, then do_write_index()
(the function responsible for writing all kinds of indexes, "regular",
split, and shared) recognizes racily clean cache entries, and writes
them with smudged stat data, i.e. with file size set to 0. When
subsequent git commands read the index, they will notice that the
smudged stat data doesn't match with the file in the worktree, and
then go on to check the file's content and notice its dirtiness.
In the above example, however, in the second 'git update-index'
prepare_to_write_split_index() decides which cache entries stored only
in the shared index should be replaced in the new split index. Alas,
this function never looks out for racily clean cache entries, and
since the file's stat data in the worktree hasn't changed since the
shared index was written, it won't be replaced in the new split index.
Consequently, do_write_index() doesn't even get this racily clean
cache entry, and can't smudge its stat data. Subsequent git commands
will then see that the index has more recent mtime than the file and
that the (not smudged) cached stat data still matches with the file in
the worktree, and, ultimately, will erroneously consider the file
clean.
Modify prepare_to_write_split_index() to recognize racily clean cache
entries, and mark them to be added to the split index. Note that
there are two places where it should check raciness: first those cache
entries that are only stored in the shared index, and then those that
have been copied by unpack_trees() from the shared index while it
constructed a new index. This way do_write_index() will get these
racily clean cache entries as well, and will then write them with
smudged stat data to the new split index.
This change makes all tests in 't1701-racy-split-index.sh' pass, so
flip the two 'test_expect_failure' tests to success. Also add the '#'
(as in nr. of trial) to those tests' description that were omitted
when the tests expected failure.
Note that after this change if the index is split when it contains a
racily clean cache entry, then a smudged cache entry will be written
both to the new shared and to the new split indexes. This doesn't
affect regular git commands: as far as they are concerned this is just
an entry in the split index replacing an outdated entry in the shared
index. It did affect a few tests in 't1700-split-index.sh', though,
because they actually check which entries are stored in the split
index; a previous patch in this series has already made the necessary
adjustments in 't1700'. And racily clean cache entries and index
splitting are rare enough to not worry about the resulting duplicated
smudged cache entries, and the additional complexity required to
prevent them is not worth it.
Several tests failed occasionally when the test suite was run with
'GIT_TEST_SPLIT_INDEX=yes'. Here are those that I managed to trace
back to this racy split index problem, starting with those failing
more frequently, with a link to a failing Travis CI build job for
each. The highlighted line [2] shows when the racy file was written,
which is not always in the failing test but in a preceeding setup
test.
t3903-stash.sh:
https://travis-ci.org/git/git/jobs/385542084#L5858
t4024-diff-optimize-common.sh:
https://travis-ci.org/git/git/jobs/386531969#L3174
t4015-diff-whitespace.sh:
https://travis-ci.org/git/git/jobs/360797600#L8215
t2200-add-update.sh:
https://travis-ci.org/git/git/jobs/382543426#L3051
t0090-cache-tree.sh:
https://travis-ci.org/git/git/jobs/416583010#L3679
There might be others, e.g. perhaps 't1000-read-tree-m-3way.sh' and
others using 'lib-read-tree-m-3way.sh', but I couldn't confirm yet.
[1] In the branch leading to the merge commit v2.1.0-rc0~45 (Merge
branch 'nd/split-index', 2014-07-16).
[2] Note that those highlighted lines are in the 'after failure' fold,
and your browser might unhelpfully fold it up before you could
take a good look.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
't1700-split-index.sh' checks that the index was split correctly under
various circumstances and that all the different ways to turn the
split index feature on and off work correctly. To do so, most of its
tests use 'test-tool dump-split-index' to see which files have their
cache entries in the split index. All these tests assume that all
cache entries are written to the shared index (called "base"
throughout these tests) when a new shared index is created. This is
an implementation detail: most git commands (basically all except 'git
update-index') don't care or know at all about split index or whether
a cache entry is stored in the split or shared index.
As demonstrated in the previous patch, refreshing a split index is
prone to a variant of the classic racy git issue. The next patch will
fix this issue, but while doing so it will also slightly change this
behaviour: only cache entries with mtime in the past will be written
only to the newly created shared index, but racily clean cache entries
will be written to the new split index (with smudged stat data).
While this upcoming change won't at all affect any git commands, it
will violate the above mentioned assumption of 't1700's tests. Since
these tests create or modify files and create or refresh the split
index in rapid succession, there are plenty of racily clean cache
entries to be dealt with, which will then be written to the new split
indexes, and, ultimately, will cause several tests in 't1700' to fail.
Let's prepare 't1700-split-index.sh' for this upcoming change and
modify its tests to avoid racily clean files by backdating the mtime
of any file modifications (and since a lot of tests create or modify
files, encapsulate it into a helper function).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the split index feature was introduced [1], refreshing a
split index is prone to a variant of the classic racy git problem.
There are a couple of unrelated tests in the test suite that
occasionally fail when run with 'GIT_TEST_SPLIT_INDEX=yes', but
't1700-split-index.sh', the only test script focusing solely on split
index, has never noticed this issue, because it only cares about how
the index is split under various circumstances and all the different
ways to turn the split index feature on and off.
Add a dedicated test script 't1701-racy-split-index.sh' to exercise
the split index feature in racy situations as well; kind of a
"t0010-racy-git.sh for split index" but with modern style (the tests
do everything in &&-chained list of commands in 'test_expect_...'
blocks, and use 'test_cmp' for more informative output on failure).
The tests cover the following sequences of index splitting, updating,
and racy file modifications, with the last two cases demonstrating the
racy split index problem:
1. Split the index while adding a racily clean file:
echo "cached content" >file
git update-index --split-index --add file
echo "dirty worktree" >file # size stays the same
This case already works properly. Even though the cache entry's
stat data matches with the modifid file in the worktree,
subsequent git commands will notice that the (split) index and
the file have the same mtime, and then will go on to check the
file's content and notice its dirtiness.
2. Add a racily clean file to an already split index:
git update-index --split-index
echo "cached content" >file
git update-index --add file
echo "dirty worktree" >file
This case already works properly. After the second 'git
update-index' writes the newly added file's cache entry to the
new split index, it basically works in the same way as case #1.
3. Split the index when it (i.e. the not yet splitted index)
contains a racily clean cache entry, i.e. an entry whose cached
stat data matches with the corresponding file in the worktree and
the cached mtime matches that of the index:
echo "cached content" >file
git update-index --add file
echo "dirty worktree" >file
# ... wait ...
git update-index --split-index --add other-file
This case already works properly. The shared index is written by
do_write_index(), i.e. the same function that is responsible for
writing "regular" and split indexes as well. This function
cleverly notices the racily clean cache entry, and writes the
entry to the new shared index with smudged stat data, i.e. file
size set to 0. When subsequent git commands read the index, they
will notice that the smudged stat data doesn't match with the
file in the worktree, and then go on to check the file's content
and notice its dirtiness.
4. Update the split index when it contains a racily clean cache
entry:
git update-index --split-index
echo "cached content" >file
git update-index --add file
echo "dirty worktree" >file
# ... wait ...
git update-index --add other-file
This case already works properly. After the second 'git
update-index' the newly added file's cache entry is only stored
in the split index. If a cache entry is present in the split
index (even if it is a replacement of an outdated entry in the
shared index), then it will always be included in the new split
index on subsequent split index updates (until the file is
removed or a new shared index is written), independently from
whether the entry is racily clean or not. When do_write_index()
writes the new split index, it notices the racily clean cache
entry, and smudges its stat date. Subsequent git commands
reading the index will notice the smudged stat data and then go
on to check the file's content and notice its dirtiness.
5. Update the split index when a racily clean cache entry is stored
only in the shared index:
echo "cached content" >file
git update-index --split-index --add file
echo "dirty worktree" >file
# ... wait ...
git update-index --add other-file
This case fails due to the racy split index problem. In the
second 'git update-index' prepare_to_write_split_index() decides,
among other things, which cache entries stored only in the shared
index should be replaced in the new split index. Alas, this
function never looks out for racily clean cache entries, and
since the file's stat data in the worktree hasn't changed since
the shared index was written, the entry won't be replaced in the
new split index. Consequently, do_write_index() doesn't even get
this racily clean cache entry, and can't smudge its stat data.
Subsequent git commands will then see that the index has more
recent mtime than the file and that the (not smudged) cached stat
data still matches with the file in the worktree, and,
ultimately, will erroneously consider the file clean.
6. Update the split index after unpack_trees() copied a racily clean
cache entry from the shared index:
echo "cached content" >file
git update-index --split-index --add file
echo "dirty worktree" >file
# ... wait ...
git read-tree -m HEAD
This case fails due to the racy split index problem. This
basically fails for the same reason as case #5 above, but there
is one important difference, which warrants the dedicated test.
While that second 'git update-index' in case #5 updates
index_state in place, in this case 'git read-tree -m' calls
unpack_trees(), which throws out the entire index, and constructs
a new one from the (potentially updated) copies of the original's
cache entries. Consequently, when prepare_to_write_split_index()
gets to work on this reconstructed index, it takes a different
code path than in case #5 when deciding which cache entries in
the shared index should be replaced. The result is the same,
though: the racily clean cache entry goes unnoticed, it isn't
added to the split index with smudged stat data, and subsequent
git commands will then erroneously consider the file clean.
Note that in the last two 'test_expect_failure' cases I omitted the
'#' (as in nr. of trial) from the tests' description on purpose for
now, as it breakes the TAP output [2]; it will be added at the end of
the series, when those two tests will be flipped to
'test_expect_success'.
[1] In the branch leading to the merge commit v2.1.0-rc0~45 (Merge
branch 'nd/split-index', 2014-07-16).
[2] In the TAP output a '#' should separate the test's description
from the TODO directive emitted by 'test_expect_failure'. The
additional '#' in "#$trial" interferes with this, the test harness
won't recognize the TODO directive, and will report that those
tests failed unexpectedly.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a new index.threads config setting which will be used to
control the threading code in do_read_index(). A value of 0 will tell the
index code to automatically determine the correct number of threads to use.
A value of 1 will make the code single threaded. A value greater than 1
will set the maximum number of threads to use.
For testing purposes, this setting can be overwritten by setting the
GIT_TEST_INDEX_THREADS=<n> environment variable to a value greater than 0.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The End of Index Entry (EOIE) is used to locate the end of the variable
length index entries and the beginning of the extensions. Code can take
advantage of this to quickly locate the index extensions without having
to parse through all of the index entries.
The EOIE extension is always written out to the index file including to
the shared index when using the split index feature. Because it is always
written out, the SHA checksums in t/t1700-split-index.sh were updated
to reflect its inclusion.
It is written as an optional extension to ensure compatibility with other
git implementations that do not yet support it. It is always written out
to ensure it is available as often as possible to speed up index operations.
Because it must be able to be loaded before the variable length cache
entries and other index extensions, this extension must be written last.
The signature for this extension is { 'E', 'O', 'I', 'E' }.
The extension consists of:
- 32-bit offset to the end of the index entries
- 160-bit SHA-1 over the extension types and their sizes (but not
their contents). E.g. if we have "TREE" extension that is N-bytes
long, "REUC" extension that is M-bytes long, followed by "EOIE",
then the hash would be:
SHA-1("TREE" + <binary representation of N> +
"REUC" + <binary representation of M>)
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
Update fsck.skipList implementation and documentation.
* ab/fsck-skiplist:
fsck: support comments & empty lines in skipList
fsck: use oidset instead of oid_array for skipList
fsck: use strbuf_getline() to read skiplist file
fsck: add a performance test for skipList
fsck: add a performance test
fsck: document that skipList input must be unabbreviated
fsck: document and test commented & empty line skipList input
fsck: document and test sorted skipList input
fsck tests: add a test for no skipList input
fsck tests: setup of bogus commit object
"git multi-pack-index" learned to detect corruption in the .midx
file it uses, and this feature has been integrated into "git fsck".
* ds/multi-pack-verify:
fsck: verify multi-pack-index
multi-pack-index: report progress during 'verify'
multi-pack-index: verify object offsets
multi-pack-index: fix 32-bit vs 64-bit size check
multi-pack-index: verify oid lookup order
multi-pack-index: verify oid fanout order
multi-pack-index: verify missing pack
multi-pack-index: verify packname order
multi-pack-index: verify corrupt chunk lookup table
multi-pack-index: verify bad header
multi-pack-index: add 'verify' verb
Various tests have been updated to make it easier to swap the
hash function used for object identification.
* bc/hash-independent-tests:
t5318: use test_oid for HASH_LEN
t1407: make hash size independent
t1406: make hash-size independent
t1405: make hash size independent
t1400: switch hard-coded object ID to variable
t1006: make hash size independent
t0064: make hash size independent
t0002: abstract away SHA-1 specific constants
t0000: update tests for SHA-256
t0000: use hash translation table
t: add test functions to translate hash-related values
Test helper binaries clean-up.
* nd/test-tool:
Makefile: add a hint about TEST_BUILTINS_OBJS
t/helper: merge test-dump-fsmonitor into test-tool
t/helper: merge test-parse-options into test-tool
t/helper: merge test-pkt-line into test-tool
t/helper: merge test-dump-untracked-cache into test-tool
t/helper: keep test-tool command list sorted
In a partial clone, whenever a sparse checkout occurs, the existence of
all blobs in the index is verified, whether they are included or
excluded by the .git/info/sparse-checkout specification. This
significantly degrades performance because a lazy fetch occurs whenever
the existence of a missing blob is checked.
This is because cache_tree_update() checks the existence of all objects
in the index, whether or not CE_SKIP_WORKTREE is set on them. Teach
cache_tree_update() to skip checking CE_SKIP_WORKTREE objects when the
repository is a partial clone. This improves performance for sparse
checkout and also other operations that use cache_tree_update().
Instead of completely removing the check, an argument could be made that
the check should instead be replaced by a check that the blob is
promised, but for performance reasons, I decided not to do this.
If the user needs to verify the repository, it can be done using fsck
(which will notify if a tree points to a missing and non-promised blob,
whether the blob is included or excluded by the sparse-checkout
specification).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently-introduced "core.alternateRefsCommand" allows callers to
specify with high flexibility the tips that they wish to advertise from
alternates. This flexibility comes at the cost of some inconvenience
when the caller only wishes to limit the advertisement to one or more
prefixes.
For example, to advertise only tags, a caller using
'core.alternateRefsCommand' would have to do:
$ git config core.alternateRefsCommand ' \
f() { git -C "$1" for-each-ref \
refs/tags --format="%(objectname)" }; f "$@"'
The above is cumbersome to write, so let's introduce a
"core.alternateRefsPrefixes" to address this common case. Instead, the
caller can run:
$ git config core.alternateRefsPrefixes 'refs/tags'
Which will behave identically to the longer example using
"core.alternateRefsCommand".
Since the value of "core.alternateRefsPrefixes" is appended to 'git
for-each-ref' and then executed, include a "--" before taking the
configured value to avoid misinterpreting arguments as flags to 'git
for-each-ref'.
In the case that the caller wishes to specify multiple prefixes, they
may separate them by whitespace. If "core.alternateRefsCommand" is set,
it will take precedence over "core.alternateRefsPrefixes".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When in a repository containing one or more alternates, Git would
sometimes like to list references from those alternates. For example,
'git receive-pack' lists the "tips" pointed to by references in those
alternates as special ".have" references.
Listing ".have" references is designed to make pushing changes from
upstream to a fork a lightweight operation, by advertising to the pusher
that the fork already has the objects (via its alternate). Thus, the
client can avoid sending them.
However, when the alternate (upstream, in the previous example) has a
pathologically large number of references, the initial advertisement is
too expensive. In fact, it can dominate any such optimization where the
pusher avoids sending certain objects.
Introduce "core.alternateRefsCommand" in order to provide a facility to
limit or filter alternate references. This can be used, for example, to
filter out references the alternate does not wish to send (for space
concerns, or otherwise) during the initial advertisement.
Let the repository that has alternates configure this command to avoid
trusting the alternate to provide us a safe command to run in the shell.
To find the alternate, pass its absolute path as the first argument.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If only hash literals are given on a "git fetch" command-line, tag
following is not requested, and the fetch is done using protocol v2, a
list of refs is not required from the remote. Therefore, optimize by
invoking transport_get_remote_refs() only if we need the refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When all refs to be fetched are exact OIDs, it is possible to perform a
fetch without requiring the remote to list refs if protocol v2 is used.
Teach Git to do this.
This currently has an effect only for lazy fetches done from partial
clones. The change necessary to likewise optimize "git fetch <remote>
<sha-1>" will be done in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach list-objects the "tree:0" filter which allows for filtering
out all tree and blob objects (unless other objects are explicitly
specified by the user). The purpose of this patch is to allow smaller
partial clones.
The name of this filter - tree:0 - does not explicitly specify that
it also filters out all blobs, but this should not cause much confusion
because blobs are not at all useful without the trees that refer to
them.
I also considered only:commits as a name, but this is inaccurate because
it suggests that annotated tags are omitted, but actually they are
included.
The name "tree:0" allows later filtering based on depth, i.e. "tree:1"
would filter out all but the root tree and blobs. In order to avoid
confusion between 0 and capital O, the documentation was worded in a
somewhat round-about way that also hints at this future improvement to
the feature.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, list-objects.c incorrectly treats all root trees of commits
as USER_GIVEN. Also, it would be easier to mark objects that are
non-user-given instead of user-given, since the places in the code
where we access an object through a reference are more obvious than
the places where we access an object that was given by the user.
Resolve these two problems by introducing a flag NOT_USER_GIVEN that
marks blobs and trees that are non-user-given, replacing USER_GIVEN.
(Only blobs and trees are marked because this mark is only used when
filtering objects, and filtering of other types of objects is not
supported yet.)
This fixes a bug in that git rev-list behaved differently from git
pack-objects. pack-objects would *not* filter objects given explicitly
on the command line and rev-list would filter. This was because the two
commands used a different function to add objects to the rev_info
struct. This seems to have been an oversight, and pack-objects has the
correct behavior, so I added a test to make sure that rev-list now
behaves properly.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we assumed only blob objects could be missing. This patch
makes rev-list handle missing trees like missing blobs. The --missing=*
and --exclude-promisor-objects flags now work for trees as they already
do for blobs. This is demonstrated in t6112.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a common mistake to put positional arguments before flags when
invoking git-rev-list. Order the positional arguments last.
This patch skips git-rev-list invocations which include the --not flag,
since the ordering of flags and positional arguments affects the
behavior. This patch also skips invocations of git-rev-list that occur
in command substitution in which the exit code is discarded, since
fixing those properly will require a more involved cleanup.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git ... | foo' will mask any errors or crashes in git, so split up such
pipes in this file.
One testcase uses several separate pipe sequences in a row which are
awkward to split up. Wrap the split-up pipe in a function so the
awkwardness is not repeated. Also change that testcase's surrounding
quotes from double to single to avoid premature string interpolation.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some pipes in tests lose the exit code of git processes, which can mask
unexpected behavior like crashes. Split these pipes up so that git
commands are only at the end of pipes rather than the beginning or
middle.
The violations fixed in this patch were found in the process of fixing
pipe placement in a prior patch.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a line-continuation and pipe on the second line, take
advantage of the shell's implicit line continuation after a pipe
character. So for example, instead of
some long line \
| next line
use
some long line |
next line
And add a blank line before and after the pipe where it aids readability
(it usually does).
This better matches the coding style documented in
Documentation/CodingGuidelines and used in shell scripts elsewhere in
the tree.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the following guideline to Documentation/CodingGuidelines:
Break overlong lines after "&&", "||", and "|", not before
them; that way the command can continue to subsequent lines
without backslash at the end.
And the following to t/README (since it is specific to writing tests):
Pipes and $(git ...) should be avoided when they swallow exit
codes of Git processes
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of Don'ts for test writing has grown large such that it is hard
to see at a glance which section an item is in. In other words, if I
ignore a little bit of surrounding context, the "don'ts" look like
"do's."
To make the list more readable, prefix "Don't" in front of every first
sentence in the items.
Also, the "Keep in mind" list is out of place and awkward, because it
was a very short "list" beneath two very long ones, and it seemed easy
to miss under the list of "don'ts," and it only had one item. So move
this item to the list of "do's" and phrase as "Remember..."
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A partial clone with missing trees can be obtained using "git clone
--filter=tree:none <repo>". In such a repository, when a tree needs to
be lazily fetched, any tree or blob it directly or indirectly references
is fetched as well, regardless of whether the original command required
those objects, or if the local repository already had some of them.
This is because the fetch protocol, which the lazy fetch uses, does not
allow clients to request that only the wanted objects be sent, which
would be the ideal solution. This patch implements a partial solution:
specify the "blob:none" filter, somewhat reducing the fetch payload.
This change has no effect when lazily fetching blobs (due to how filters
work). And if lazily fetching a commit (such repositories are difficult
to construct and is not a use case we support very well, but it is
possible), referenced commits and trees are still fetched - only the
blobs are not fetched.
The necessary code change is done in fetch_pack() instead of somewhere
closer to where the "filter" instruction is written to the wire so that
only one part of the code needs to be changed in order for users of all
protocol versions to benefit from this optimization.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recognize -r and --recursive as synonyms for --max-depth=-1 for
compatibility with GNU grep; it's still the default for git grep.
This also adds --no-recursive as synonym for --max-depth=0 for free,
which is welcome for completeness and consistency.
Fix the description for --max-depth, while we're at it -- negative
values other than -1 actually disable recursion, i.e. they are
equivalent to --max-depth=0.
Requested-by: Christoph Berg <myon@debian.org>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Initial-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you type "git help" (or just "git") you are greeted with a list
with commonly used commands and their short description and are
suggested to use "git help -a" or "git help -g" for more details.
"git help -av" would be more friendly and inline with what is shown
with "git help" since it shows list of commands with description as
well, and commands are properly grouped.
"help -av" does not show everything "help -a" shows though. Add
external command section in "help -av" for this. While at there, add a
section for aliases as well (until now aliases have no UI, just "git
config").
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4362da078e (t7005-editor: get rid of the SPACES_IN_FILENAMES
prereq, 2018-05-14) removed code for detecting whether spaces in
filenames work. Since we rely on spaces throughout the test suite
("trash directory.t1234-foo"), testing whether we can use the filename
"e space.sh" was redundant and unnecessary.
In simplifying the code, though, this introduced a regression around how
spaces are handled, not in the /name/ of the editor script, but /in/ the
script itself. The script just does `echo space >$1`, where $1 is for
example "/foo/t/trash directory.t7005-editor/.git/COMMIT_EDITMSG".
With most shells, or with Bash in posix mode, $1 will not be subjected
to field splitting. But if we invoke Bash directly, which will happen if
we build Git with SHELL_PATH=/bin/bash, it will detect and complain
about an "ambiguous redirect". More details can be found in [1], thanks
to SZEDER Gábor.
Make sure that the editor script quotes "$1" to remove the ambiguity.
[1] https://public-inbox.org/git/20180926121107.GH27036@localhost/
Signed-off-by: Alexander Pyhalov <apyhalov@gmail.com>
Commit-message-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Invoking 'git rev-parse --show-superproject-working-tree' exits with
"fatal: BUG: returned path string doesn't match cwd?"
when the superproject has an unmerged entry for the current submodule,
instead of displaying the superproject's working tree.
The problem is due to the fact that when a merge of the submodule reference
is in progress, "git ls-files --stage —full-name <submodule-relative-path>”
returns three seperate entries for the submodule (one for each stage) rather
than a single entry; e.g.,
$ git ls-files --stage --full-name submodule-child-test
160000 dbbd2766fa330fa741ea59bb38689fcc2d283ac5 1 submodule-child-test
160000 f174d1dbfe863a59692c3bdae730a36f2a788c51 2 submodule-child-test
160000 e6178f3a58b958543952e12824aa2106d560f21d 3 submodule-child-test
The code in get_superproject_working_tree() expected exactly one entry to
be returned; this patch makes it use the first entry if multiple entries
are returned.
Test t1500-rev-parse is extended to cover this case.
Signed-off-by: Sam McKelvie <sammck@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of running `test "foo" = "$(bar)"`, we prefix the whole thing
with `echo`. Comparing to nearby tests makes it clear that this is just
debug leftover. This line has actually been modified four times since it
was introduced in e52290428b (General ref log reading improvements.,
2006-05-19) and the `echo` has always survived. Let's finally drop it.
This script could need some more cleanups. This is just an immediate fix
so that we actually test what we intend to.
All other hits for `git grep "\<echo test " -- t/` seem fine. They want
to create some input or expected output data.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test framework test-lib.sh itself would want to give warnings
and hints, e.g. when it sees a deprecated environment variable is in
use that we want to encourage users to migrate to another variable.
The self-test of test framework done in t0000 however do not expect
to see these warnings and hints, so depending on the settings of
environment variables, a running test may or may not produce these
messages to the standard error output, breaking the expectations of
self-test test framework does on itself. Here is what we see:
$ TEST_GIT_INDEX_VERSION=4 sh t0000-basic.sh -i -v
...
'err' is not empty, it contains:
warning: TEST_GIT_INDEX_VERSION is now GIT_TEST_INDEX_VERSION
hint: set GIT_TEST_INDEX_VERSION too during the transition period
not ok 5 - pretend we have a fully passing test suite
The following quick attempt to work it around does not work, because
some tests in t0000 do want to see expected errors from the test
framework itself.
t/t0000-basic.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index 850f651e4e..88c6ed4696 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -88,7 +88,7 @@ _run_sub_test_lib_test_common () {
'
# Point to the t/test-lib.sh, which isn't in ../ as usual
- . "\$TEST_DIRECTORY"/test-lib.sh
+ . "\$TEST_DIRECTORY"/test-lib.sh >/dev/null 2>&1
EOF
cat >>"$name.sh" &&
chmod +x "$name.sh" &&
There are a few possible ways to work this around:
* We could strip the warning: and hint: unconditionally from the
error output before the error messages are checked in the
self-test (helper functions check_sub_test_lib_test_err and
check_sub_test_lib_test); the problem with this approach is that
it will make it impossible to write self-tests to ensure that
right warnings and hints are given.
* We could force a sane environment settings before the test helper
_run_sub_test_lib_test_common dot-sources test-lib.sh; the
problem with this approach is that _run_sub_test_lib_test_common
now needs to be aware of what pairs of environment variables are
checked in test-lib.sh using check_var_migration helper.
The final patch I came up with is probably the solution that is
least bad. Set a variable to tell test-lib.sh that we are running
a self-test, so that various pieces in test-lib.sh can react to keep
the output stable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename GIT_FORCE_PRELOAD_TEST to GIT_TEST_PRELOAD_INDEX for consistency with
the other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename TEST_GIT_INDEX_VERSION to GIT_TEST_INDEX_VERSION for consistency with
the other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename GIT_FSMONITOR_TEST to GIT_TEST_FSMONITOR for consistency with the
other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Remove the outdated instructions on how to run the test suite utilizing
fsmonitor now that it is properly documented in t/README.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/commit.c:prepare_to_commit() can call run_status() twice if
using the editor, including status, and the user attempts to record a
non-merge empty commit without explicit --allow-empty. If there is also
a rename involved as well (due to using 'git add -N'), then a BUG in
wt-status.c is triggered:
BUG: wt-status.c:476: multiple renames on the same target? how?
The reason we hit this bug is that both run_status() calls use the same
struct wt_status * (named s), and s->change is not freed between runs.
Changes are inserted into s with string_list_insert, which usually means
that the second run just recomputes all the same results and overwrites
what was computed the first time. However, ever since commit
176ea74793 ("wt-status.c: handle worktree renames", 2017-12-27),
wt-status started checking for renames and copies but also added a
preventative check that d->rename_status wasn't already set and output a
BUG message if it was. The problem isn't that there are multiple rename
targets to a single path as the error implies, the problem is that 's'
is not freed/cleared between the two run_status() calls.
Ever since commit dc6b1d92ca ("wt-status: use settings from
git_diff_ui_config", 2018-05-04), which stopped hardcoding
DIFF_DETECT_RENAME and allowed users to ask for copy detection, this bug
has also been triggerable with a copy instead of a rename.
Fix the bug by clearing s->change. A better change might be to clean up
all of s between the two run_status() calls. A good first step towards
such a goal might be writing a function to free the necessary fields in
the wt_status * struct; a cursory glance at the code suggests all of its
allocated data is probably leaked. However, doing all that cleanup is a
bigger task for someone else interested to tackle; just fix the bug for
now.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 2.19.1
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.18:
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.17:
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
As with urls, submodule paths with dashes are ignored by
git, but may end up confusing older versions. Detecting them
via fsck lets us prevent modern versions of git from being a
vector to spread broken .gitmodules to older versions.
Compared to blocking leading-dash urls, though, this
detection may be less of a good idea:
1. While such paths provide confusing and broken results,
they don't seem to actually work as option injections
against anything except "cd". In particular, the
submodule code seems to canonicalize to an absolute
path before running "git clone" (so it passes
/your/clone/-sub).
2. It's more likely that we may one day make such names
actually work correctly. Even after we revert this fsck
check, it will continue to be a hassle until hosting
servers are all updated.
On the other hand, it's not entirely clear that the behavior
in older versions is safe. And if we do want to eventually
allow this, we may end up doing so with a special syntax
anyway (e.g., writing "./-sub" in the .gitmodules file, and
teaching the submodule code to canonicalize it when
comparing).
So on balance, this is probably a good protection.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Urls with leading dashes can cause mischief on older
versions of Git. We should detect them so that they can be
rejected by receive.fsckObjects, preventing modern versions
of git from being a vector by which attacks can spread.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.16:
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.15:
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.
As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.
Moreover, naively adding such a submodule doesn't work:
$ git submodule add $url -sub
The following path is ignored by one of your .gitignore files:
-sub
even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").
Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.
There are two minor differences to the tests in t7416 (that
covered urls):
1. We don't have a "./-sub" escape hatch to make this
work, since the submodule code expects to be able to
match canonical index names to the path field (so you
are free to add submodule config with that path, but we
would never actually use it, since an index entry would
never start with "./").
2. After this patch, cloning actually succeeds. Since we
ignore the submodule.*.path value, we fail to find a
config stanza for our submodule at all, and simply
treat it as inactive. We still check for the "ignoring"
message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.
However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:
- it's meant as a file url, like "-path". But then any
clone is not going to have the matching path, since it's
by definition relative inside the newly created clone. If
you spell it as "./-path", the submodule code sees the
"/" and translates this to an absolute path, so it at
least works (assuming the receiver has the same
filesystem layout as you). But that trick does not apply
for a bare "-path".
- it's meant as an ssh url, like "-host:path". But this
already doesn't work, as we explicitly disallow ssh
hostnames that begin with a dash (to avoid option
injection against ssh).
- it's a remote-helper scheme, like "-scheme::data". This
_could_ work if the receiver bends over backwards and
creates a funny-named helper like "git-remote--scheme".
But normally there would not be any helper that matches.
Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.
Our tests cover two cases:
1. A file url with "./" continues to work, showing that
there's an escape hatch for people with truly silly
repo names.
2. A url starting with "-" is rejected.
Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently added "range-diff" had a corner-case bug to cause it
segfault, which has been corrected.
* tg/range-diff-corner-case-fix:
linear-assignment: fix potential out of bounds memory access
"git update-ref" learned to make both "--no-deref" and "--stdin"
work at the same time.
* en/update-ref-no-deref-stdin:
update-ref: allow --no-deref with --stdin
update-ref: fix type of update_flags variable to match its usage
Update error messages given by "git remote" and make them consistent.
* ms/remote-error-message-update:
builtin/remote: quote remote name on error to display empty name
The code to backfill objects in lazily cloned repository did not
work correctly, which has been corrected.
* jt/lazy-object-fetch-fix:
fetch-object: set exact_oid when fetching
fetch-object: unify fetch_object[s] functions
"git rebase" etc. in Git 2.19 fails to abort when given an empty
commit log message as result of editing, which has been corrected.
* en/sequencer-empty-edit-result-aborts:
sequencer: fix --allow-empty-message behavior, make it smarter
Recent update broke the reachability algorithm when refs (e.g.
tags) that point at objects that are not commit were involved,
which has been fixed.
* ds/reachable:
commit-reach: fix memory and flag leaks
commit-reach: properly peel tags
"git add ':(attr:foo)'" is not supported and is supposed to be
rejected while the command line arguments are parsed, but we fail
to reject such a command line upfront.
* nd/attr-pathspec-fix:
add: do not accept pathspec magic 'attr'
