Without this patch, git-grep gives confusing usage information:
$ git grep --confused
usage: git grep <option>* <rev>* [-e] <pattern> [<path>...]
$ git grep HEAD pattern
fatal: ambiguous argument 'pattern': unknown revision or path no
t in the working tree.
Use '--' to separate paths from revisions
So put <pattern> before the <rev>s, in accordance with actual correct
usage. While we're changing the usage string, we might as well include
the "--" separating revisions and paths, too.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/dashless:
Make usage strings dash-less
t/: Use "test_must_fail git" instead of "! git"
t/test-lib.sh: exit with small negagive int is ok with test_must_fail
Conflicts:
builtin-blame.c
builtin-mailinfo.c
builtin-mailsplit.c
builtin-shortlog.c
git-am.sh
t/t4150-am.sh
t/t4200-rerere.sh
If PATH_MAX on your system is smaller than any path stored in the git
repository, that can cause memory corruption inside of the grep_tree
function used by git-grep.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we just chose whether to allow external grep
based on the __unix__ define. However, there are systems
which define this macro but which have an inferior group
(e.g., one that does not support all options used by t7002).
This allows users to accept the potential speed penalty to
get a more consistent grep experience (and to pass the
testsuite).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I expected git grep --name-only to give me only the file names,
much as git diff --name-only only generates filenames. Alas the
option is -l, which matches common external greps but doesn't match
other parts of the git UI.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This converts the index explicitly on read and write to its on-disk
format, allowing the in-core format to contain more flags, and be
simpler.
In particular, the in-core format is now host-endian (as opposed to the
on-disk one that is network endian in order to be able to be shared
across machines) and as a result we can dispense with all the
htonl/ntohl on accesses to the cache_entry fields.
This will make it easier to make use of various temporary flags that do
not exist in the on-disk format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A NUL byte at beginning of file, or just after a newline
would provoke an invalid buf[-1] access in a few places.
* builtin-grep.c (cmd_grep): Don't access buf[-1].
* builtin-pack-objects.c (get_object_list): Likewise.
* builtin-rev-list.c (read_revisions_from_stdin): Likewise.
* bundle.c (read_bundle_header): Likewise.
* server-info.c (read_pack_info_file): Likewise.
* transport.c (insert_packed_refs): Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index is unmerged, e.g.
$ git ls-files -u
100644 faf413748eb6ccb15161a212156c5e348302b1b6 1 setup.c
100644 145eca50f4 2 setup.c
100644 cb9558c49b6027bf225ba2a6154c4d2a52bcdbe2 3 setup.c
running "git grep" for work tree files repeats hits for each unmerged
stage.
$ git grep -n -e setup_work_tree -- '*.[ch]'
setup.c:209:void setup_work_tree(void)
setup.c:209:void setup_work_tree(void)
setup.c:209:void setup_work_tree(void)
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building command line to invoke external grep, the
arguments to -A/-B/-C options were placd in randarg[] buffer,
but the code forgot that snprintf() does not count terminating
NUL in its return value. This caused "git grep -A1 -B2" to
invoke external grep with "-B21 -A1".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We called flush_grep() every time we saw an unmerged entry in
the index. If we happen to find an unmerged entry before we saw
more than two paths, we incorrectly declared that the user had
too many non-paths options in front.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to (almost) always show the name of the file without
relying on "-H" option of GNU grep, we used to add /dev/null to
the argument list unless we are doing -l or -L. This caused
"/dev/null:0" to show up when -c is given in the output.
It is not enough to add -c to the set of options we do not pass
/dev/null for. When we have too many files, we invoke grep
multiple times and we need to avoid giving a widow filename to
the last invocation -- otherwise we will not see the name.
This keeps two filenames when the argv[] buffer is about to
overflow and we have not finished iterating over the index, so
that the last round will always have at least two paths to work
with (and not require /dev/null).
An obvious and the only exception is when there is only 1 file
that is given to the underlying grep, and in that case we avoid
passing /dev/null and let the external "grep -c" report only the
number of matches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin-grep.c (strtoul_ui): Move function definition from here, to...
* git-compat-util.h (strtoul_ui): ...here, with an added "base" parameter.
* builtin-grep.c (cmd_grep): Update use of strtoul_ui to include base, "10".
* builtin-update-index.c (read_index_info): Diagnose an invalid mode integer
that is out of range or merely larger than INT_MAX.
(cmd_update_index): Use strtoul_ui, not sscanf.
* convert-objects.c (write_subdirectory): Likewise.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes slightly more lines than it adds, but the real reason for
doing this is that future optimizations will require more setup of the
tree descriptor, and so we want to do it in one place.
Also renamed the "desc.buf" field to "desc.buffer" just to trigger
compiler errors for old-style manual initializations, making sure I
didn't miss anything.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since we have the "tree_entry_len()" helper function these days, and
don't need to do a full strlen(), there's no point in saving the path
length - it's just redundant information.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you use scanf or sscanf to parse integers, your code probably
accepts bogus inputs. For example, builtin-grep (aka git-grep) uses
sscanf(scan, "%u", &num) to parse the integer argument to -A, -B, -C.
Currently, "-C 1,000" and "-C 4294967297" are both treated just like
"-C 1":
$ git-grep -h -C 4294967297 juggle
out and you may find it easier to switch back and forth if you
juggle multiple lines of development simultaneously. Of
course, you will pay the price of more disk usage to hold
The obvious fix is to use strtoul instead. But using a bare strtoul is
too messy, at least when done properly, so I've added a wrapper function.
The new function in the patch below belongs elsewhere if it would be
useful in replacing any of the four remaining uses of sscanf.
One final note: With this change, I get a slightly different
diagnostic depending on the context size:
$ ./git-grep -h -C 4294967296 juggle
fatal: 4294967296: invalid context length argument
[Exit 128]
$ ./git-grep -h -C 4294967295 juggle
grep: 4294967295: invalid context length argument
[Exit 1]
A common convention that makes it easy to identify the source
of a diagnostic is to include the program name before the first ":".
Whether that should be "git" or "git-grep" is another question.
Using "grep" or "fatal" is misleading.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some systems have sizeof(off_t) == 8 while sizeof(size_t) == 4.
This implies that we are able to access and work on files whose
maximum length is around 2^63-1 bytes, but we can only malloc or
mmap somewhat less than 2^32-1 bytes of memory.
On such a system an implicit conversion of off_t to size_t can cause
the size_t to wrap, resulting in unexpected and exciting behavior.
Right now we are working around all gcc warnings generated by the
-Wshorten-64-to-32 option by passing the off_t through xsize_t().
In the future we should make xsize_t on such problematic platforms
detect the wrapping and die if such a file is accessed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Previous step converted use of strncmp() with literal string
mechanically even when the result is only used as a boolean:
if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo")))
This step manually cleans them up to read:
if (!prefixcmp(arg, "foo"))
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to skip unmerged entries, which made sense for grepping
in the cached copies, but not for grepping in the working tree.
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets you say:
git grep --all-match -e A -e B -e C
to find lines that match A or B or C but limit the matches from
the files that have all of A, B and C.
This is different from
git grep -e A --and -e B --and -e C
in that the latter looks for a single line that has all of these
at the same time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes three functions and associated option structures from
builtin-grep available from other parts of the system.
* options to drive built-in grep engine is stored in struct
grep_opt;
* pattern strings and extended grep expressions are added to
struct grep_opt with append_grep_pattern();
* when finished calling append_grep_pattern(), call
compile_grep_patterns() to prepare for execution;
* call grep_buffer() to find matches in the in-core buffer.
This also adds an internal option "status_only" to grep_opt,
which suppresses any output from grep_buffer(). Callers of the
function as library can use it to check if there is a match
without producing any output.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It turns out that I actually wanted to avoid the filenames (because I
didn't care - I just wanted to see the context in which something was
used) when doing a grep. But since "git grep" didn't take the "-h"
parameter, I ended up having to do "grep -5 -h *.c" instead.
So here's a trivial patch that adds "-h" (and thus has to enable -H too)
to "git grep" parsing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, the command shows pathnames relative to the current
directory. Use --full-name (the same flag to do so in ls-files)
if you want to see the full pathname relative to the project root.
This makes it very pleasant to run in Emacs compilation (or
"grep-find") buffer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to find the first match of the pattern and then if the
match is not for the entire word, declared that the whole line
does not match.
But that is wrong. The command "git grep -w -e mmap" should
find that a line "foo_mmap bar mmap baz" matches, by tring the
second instance of pattern "mmap" on the same line.
Problems an earlier round of "fix" had were pointed out by Morten
Welinder, which have been incorporated in the t7002 tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This extends the behaviour of git-grep when multiple -e options
are given. So far, we allowed multiple -e to behave just like
regular grep with multiple -e, i.e. the patterns are OR'ed
together.
With this change, you can also have multiple patterns AND'ed
together, or form boolean expressions, like this (the
parentheses are quoted from the shell in this example):
$ git grep -e _PATTERN --and \( -e atom -e token \)
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/upload-corrupt:
upload-pack/fetch-pack: support side-band communication
Retire git-clone-pack
upload-pack: prepare for sideband message support.
upload-pack: avoid sending an incomplete pack upon failure
Fix possible out-of-bounds array access
If match is "", match[-1] is accessed. Let pathspec_matches return 1 in that
case indicating that "" matches everything.
Incidently this fixes git-grep'ing in ".".
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We've had this notion of a "object_list" for a long time, which eventually
grew a "name" member because some users (notably git-rev-list) wanted to
name each object as it is generated.
That object_list is great for some things, but it isn't all that wonderful
for others, and the "name" member is generally not used by everybody.
This patch splits the users of the object_list array up into two: the
traditional list users, who want the list-like format, and who don't
actually use or want the name. And another class of users that really used
the list as an extensible array, and generally wanted to name the objects.
The patch is fairly straightforward, but it's also biggish. Most of it
really just cleans things up: switching the revision parsing and listing
over to the array makes things like the builtin-diff usage much simpler
(we now see exactly how many members the array has, and we don't get the
objects reversed from the order they were on the command line).
One of the main reasons for doing this at all is that the malloc overhead
of the simple object list was actually pretty high, and the array is just
a lot denser. So this patch brings down memory usage by git-rev-list by
just under 3% (on top of all the other memory use optimizations) on the
mozilla archive.
It does add more lines than it removes, and more importantly, it adds a
whole new infrastructure for maintaining lists of objects, but on the
other hand, the new dynamic array code is pretty obvious. The change to
builtin-diff-tree.c shows a fairly good example of why an array interface
is sometimes more natural, and just much simpler for everybody.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't just read the --ignore-case/-i option, pass the flag on to the
external grep program.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "tree_entry()" function that combines the common operation of
doing a "tree_entry_extract()" + "update_tree_entry()".
It also has a simplified calling convention, designed for simple loops
that traverse over a whole tree: the arguments are pointers to the tree
descriptor and a name_entry structure to fill in, and it returns a boolean
"true" if there was an entry left to be gotten in the tree.
This allows tree traversal with
struct tree_desc desc;
struct name_entry entry;
desc.buf = tree->buffer;
desc.size = tree->size;
while (tree_entry(&desc, &entry) {
... use "entry.{path, sha1, mode, pathlen}" ...
}
which is not only shorter than writing it out in full, it's hopefully less
error prone too.
[ It's actually a tad faster too - we don't need to recalculate the entry
pathlength in both extract and update, but need to do it only once.
Also, some callers can avoid doing a "strlen()" on the result, since
it's returned as part of the name_entry structure.
However, by now we're talking just 1% speedup on "git-rev-list --objects
--all", and we're definitely at the point where tree walking is no
longer the issue any more. ]
NOTE! Not everybody wants to use this new helper function, since some of
the tree walkers very much on purpose do the descriptor update separately
from the entry extraction. So the "extract + update" sequence still
remains as the core sequence, this is just a simplified interface.
We should probably add a silly two-line inline helper function for
initializing the descriptor from the "struct tree" too, just to cut down
on the noise from that common "desc" initializer.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Of course, it still ignores the fact that not all grep's support some of
the flags like -F/-L/-A/-C etc, but for those cases, the external grep
itself will happily just say "unrecognized option -F" or similar.
So with this change, "git grep" should handle all the flags the native
grep handles, which is really quite fine. We don't _need_ to expose
anything more, and if you do want our extensions, you can get them with
"--uncached" and an up-to-date index.
No configuration necessary, and we automatically take advantage of any
native grep we have, if possible.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "-F" flag apparently got mis-translated due to some over-eager
copy-paste work into a duplicate "-H" when using the external grep.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's not perfect, but it gets the "git grep some-random-string" down to
the good old half-a-second range for the kernel.
It should convert more of the argument flags for "grep", that should be
trivial to expand (I did a few just as an example). It should also bother
to try to return the right "hit" value (which it doesn't, right now - the
code is kind of there, but I didn't actually bother to do it _right_).
Also, right now it _just_ limits by number of arguments, but it should
also strictly speaking limit by total argument size (ie add up the length
of the filenames, and do the "exec_grep()" flush call if it's bigger than
some random value like 32kB).
But I think that it's _conceptually_ doing all the right things, and it
seems to work. So maybe somebody else can do some of the final polish.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I mistyped
git grep next -e '"^@"' '*.c'
and got many hits that contain "next" without complaint.
Obviously what I meant to say was:
git grep -e '"^@"' next -- '*.c'
This tightens the argument parsing rule a bit:
- All "grep" parameters should come first;
- If there is no -e nor -f to specify pattern, the first non
option string is the parameter;
- After that, zero or more revs can follow.
- An optional '--' can be present, and is skipped.
- All the rest are pathspecs. If '--' was not there, they must
be paths that exist in the working tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier code descended into Documentation/technical when
given "Documentation/how*" as the pattern, which was too loose.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Grep may want to grok multiple revisions, but it does not make
much sense to walk revisions while doing so. This stops calling
the code to parse parameters for the revision walker. The
parameter parsing for the optional "-e" option becomes a lot
simpler with it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This tweaks the pathspec wildcard used in builtin-grep to match
that of ls-files. With this:
git grep -e DEBUG -- '*/Kconfig*'
would work like the shell script version, and you could even do:
git grep -e DEBUG --cached -- '*/Kconfig*' ;# from index
git grep -e DEBUG v2.6.12 -- '*/Kconfig*' ;# from rev
Signed-off-by: Junio C Hamano <junkio@cox.net>
This attempts to set up built-in "git grep" to further reduce
our dependence on the shell, while at the same time optionally
allowing to run grep against object database. You could do
funky things like these:
git grep --cached -e pattern ;# grep from index
git grep -e pattern master ;# or in a rev
git grep -e pattern master next ;# or in multiple revs
git grep -e pattern pu^@ ;# even like this with an
;# extension from another topic ;-)
git grep -e pattern master..next ;# or even from rev ranges
git grep -e pattern master~20:Documentation
;# or an arbitrary tree
git grep -e pattern next:git-commit.sh
;# or an arbitrary blob
Right now, it does not understand and/or obey many options grep
should accept, and the pattern must be given with -e option due
to the way the parameter parser is structured, both of which
obviously need to be fixed for usability.
But this is going in the right direction. The shell script
version is one of the worst Portability offender in the git
barebone Porcelainish; it uses xargs -0 to pass paths around and
shell arrays to sift flags and parameters.
Signed-off-by: Junio C Hamano <junkio@cox.net>
