Bigger writes to network drives on Windows XP fail. Cap them at 31MB to
allow them to succeed. Callers need to be prepared for write() calls
that do less work than requested anyway.
On local drives, write() calls are translated to WriteFile() calls with
a cap of 64KB on Windows XP and 256KB on Vista. Thus a cap of 31MB won't
affect the number of WriteFile() calls which do the actual work. There's
still room for some other version of Windows to use a chunk size of 1MB
without increasing the number of system calls.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the problem where the cmd->err passed into start_command wasn't
being properly closed when certain types of errors occurr. (Compare
the affected code with the clean shutdown code later in the function.)
On Windows, this problem would be triggered if mingw_spawnvpe()
failed, which would happen if the command to be executed was malformed
(e.g. a text file that didn't start with a #! line). If cmd->err was
a pipe, the failure to close it could result in a hang while the other
side was waiting (forever) for either input or pipe close, e.g. while
trying to shove the output into the side band. On msysGit, this
problem was causing a hang in t5516-fetch-push.
[J6t: With a slight adjustment of the test case, the hang is also
observed on Linux.]
Signed-off-by: bert Dvornik <dvornik+git@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_mmap implementation was broken for file sizes that wouldn't fit
into a size_t (32 bits). This was caused by intermediate variables that
were only 32 bits wide when they should be 64 bits.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce -n and -v options for "git notes prune" in complete analogy to
"git prune" so that one can check for dangling notes easily.
The output is a list of names of objects whose notes would be resp.
are removed so that one can check the object ("git show sha1") as well as
the note ("git notes show sha1").
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coloring the extended headers where done as a whole not per line. less with
option -R (which is the default from git) does not support this coloring
mode because of performance reasons. The -r option would be an alternative
but has problems with lines that are longer than the screen. Therefore
stick to the idiom to color each line separately. The problem is, that the
result of ill_metainfo() will also be used as an parameter to an external
diff driver, so we need to disable coloring in this case.
Because coloring is now done inside fill_metainfo() we can simply add this
string to the diff header and therefore keep the last newline in the
extended header. This results also into the fact that the external diff
driver now gets this last newline too. Which is a change in behavior
but a good one.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This perl snippet is useful for quickly making a password without
htpasswd(1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Produce an error if the user tries to supply a password for anonymous
- Clarify the error message produced when there's no [gitcvs.authdb]
- Produce an E error if the authdb doesn't exist instead of spewing
$! to the user
- do crypt($user, descramble($pass)) eq $hash; crypt($user, $hash)
eq $hash would accept any password
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Indent the last commit to fit with the rest of the code.
- Use lexical filehandles instead of global globs
- Close the filehandle after the password database has been read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a git repository is shared via HTTP, the config file is typically
visible. Use an external file instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow git-cvsserver to use authentication over pserver mode. The
pserver user/password database is stored in the config file for each
repository.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Worriedly-Acked-by: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add ‘git remote set-branches’ for changing the list of tracked refs
for a remote repository with one "porcelain-level" command. This
complements the longstanding ‘git remote add --track’ option.
The interface is based on the ‘git remote set-url’ subcommand.
git remote set-branches base --add C
git remote set-branches base A B D
git remote set-branches base --delete D; # not implemented
Suggested-by: martin f. krafft <madduck@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the default hooks/post-receive file, the hook is called
with three arguments on stdin:
<oldrev> <newrev> <refname>
In command-line mode, the arguments come in a different order, because
the email hook instead calls:
generate_email $2 $3 $1
Add a comment to explain why, based on comments from the mailing list
and the commit message to v1.5.1~9. Thanks to Andy for the
explanation.
Requested-by: martin f. krafft <madduck@debian.org>
Cc: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discussed on the list, "crlf" is not an optimal name. Linus
suggested "text", which is much better.
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the semantics of the "crlf" attribute so that it enables
end-of-line normalization when it is set, regardless of "core.autocrlf".
Add a new setting for "crlf": "auto", which enables end-of-line
conversion but does not override the automatic text file detection.
Add a new attribute "eol" with possible values "crlf" and "lf". When
set, this attribute enables normalization and forces git to use CRLF or
LF line endings in the working directory, respectively.
The line ending style to be used for normalized text files in the
working directory is set using "core.autocrlf". When it is set to
"true", CRLFs are used in the working directory; when set to "input" or
"false", LFs are used.
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/gitdiffcore: fix order in pickaxe description
Documentation: fix minor inconsistency
Documentation: rebase -i ignores options passed to "git am"
hash_object: correction for zero length file
The name "Z" for the UTC timezone is required to properly parse ISO 8601
timestamps. Add it to the list of recognized timezones.
Because timezone names can be shorter than 3 letters, loosen the
restriction in match_alpha() that used to require at least 3 letters to
match to allow a short timezone name as long as it matches exactly. Prior
to the introduction of the "Z" zone, this already affected the timezone
"NT" (Nome).
Signed-off-by: Marcus Comstedt <marcus@mc.pp.se>
Reviewed-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reverse the order of "origin" and "result" so that the sentence
really describes an addition rather than a removal.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we don't always write out commands in full (`git command`) we
should do it consistently in adjacent paragraphs.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here we simply make --patch a synonym for -p, whose mnemonic was "patch"
all along.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a :short modifier to objectname which outputs the abbreviated
object name.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check whether size is zero was done after if size <= SMALL_FILE_SIZE,
as result, zero size case was never triggered. Instead zero length file
was treated as any other small file. This did not caused any problem, but
if we have a special case for size equal to zero, it is better to make it
work and avoid redundant malloc().
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-format-patch (used by 'patch' and 'patches' views) use the
same rename detection options that git-diff and git-diff-tree (used
by 'commitdiff', 'blobdiff', etc.) use.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As an option to the "diff" family, it is fairly obvious what
"detect renames" means. However, for revision traversal, the
"-M" option is just included in the long list of options,
with no indication that it is about showing renames in diffs
versus following renames. Let's make it more explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With new configuration "diff.noprefix", "git diff" does not show a source or destination prefix ala "git diff --no-prefix".
Signed-off-by: Eli Collins <eli@cloudera.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restrict the tags used to generate the version string to those that
begin with "v", since git's tags for git-core (ie. excluding git-gui)
are all of the form "vX.Y...".
This is to avoid using private tags by the user in a clone of the git
code repository, which may break certain machinery (eg. Makefile, gitk).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, autocrlf would only work well for normalized
repositories. Any text files that contained CRLF in the repository
would cause problems, and would be modified when handled with
core.autocrlf set.
Change autocrlf to not do any conversions to files that in the
repository already contain a CR. git with autocrlf set will never
create such a file, or change a LF only file to contain CRs, so the
(new) assumption is that if a file contains a CR, it is intentional,
and autocrlf should not change that.
The following sequence should now always be a NOP even with autocrlf
set (assuming a clean working directory):
git checkout <something>
touch *
git add -A . (will add nothing)
git commit (nothing to commit)
Previously this would break for any text file containing a CR.
Some of you may have been folowing Eyvind's excellent thread about
trying to make end-of-line translation in git a bit smoother.
I decided to attack the problem from a different angle: Is it possible
to make autocrlf behave non-destructively for all the previous problem cases?
Stealing the problem from Eyvind's initial mail (paraphrased and
summarized a bit):
1. Setting autocrlf globally is a pain since autocrlf does not work well
with CRLF in the repo
2. Setting it in individual repos is hard since you do it "too late"
(the clone will get it wrong)
3. If someone checks in a file with CRLF later, you get into problems again
4. If a repository once has contained CRLF, you can't tell autocrlf
at which commit everything is sane again
5. autocrlf does needless work if you know that all your users want
the same EOL style.
I belive that this patch makes autocrlf a safe (and good) default
setting for Windows, and this solves problems 1-4 (it solves 2 by being
set by default, which is early enough for clone).
I implemented it by looking for CR charactes in the index, and
aborting any conversion attempt if this is found.
Signed-off-by: Finn Arne Gangstad <finag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 9c00de5 (ls-remote: fall-back to default remotes when no remote
specified), when no repository is specified, ls-remote may use
the URL/remote in the config "branch.<name>.remote" or the remote
"origin"; it may not be immediately obvious to the user which was used.
In such cases, print a simple "From <URL>" line to indicate which
repository was used. This message is similar to git-fetch's, and is
printed to stderr to avoid breaking existing scripts that depend on
ls-remote's output behaviour.
It can also be disabled with -q/--quiet.
Modify tests related to falling back on default remotes to check for
this as well, and add a test to check for suppression of the message.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user specifies a message, use fmt_merge_msg_shortlog() to
append the shortlog.
Previously, when a message was specified, we ignored the merge title
("Merge <foo> into <bar>") and shortlog from fmt_merge_msg().
Update the documentation for -m to reflect this too.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shift implementation into a private function, do_fmt_merge_msg(). This
allows for further changes to the implementation, without affecting the
interface.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is more accurate to call it 'merge_names' instead of 'msg', as it
does not contain the final message.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ce9d823 (merge: do not add standard message when message is given with
-m option) changed the behaviour of the code that the comment addressed,
but the comment was not similarly updated.
Fix this.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we know we are creating a bare repository, we use setenv
to set the GIT_DIR directory to the current directory
(either where we already were, or one we created and chdir'd
into with "git init --bare <dir>").
However, with "git --bare init <dir>" (note the --bare as a
git wrapper option), the setup code actually sets GIT_DIR
for us, but it uses the wrong, original cwd when a directory
is given. Because our setenv does not use the overwrite
flag, it is ignored.
We need to set the overwrite flag, but only when we are
given a directory on the command line. That still allows:
GIT_DIR=foo.git git init --bare
to work. The behavior is changed for:
GIT_DIR=foo.git git init --bare bar.git
which used to create the repository in foo.git, but now will
use bar.git. This is more sane, as command line options
should generally override the environment.
Noticed by Oliver Hoffmann.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning into a non-bare repository, e.g. "git clone $URL mine",
we used to report that we are cloning into "mine/.git". Reword the
report to say "Cloning into mine" instead, as that matches what the
end-user asked for closer.
Make the message for "git clone --bare $URL mine" to say "Cloning
into bare repository mine" do make the distinction between this case and
the above stand out a bit more prominently.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-check-ref-format(1) describes names which
cannot be used as refnames for git. Some are
legal branchnames in subversion however.
Mangle the not yet handled cases.
Signed-off-by: Torsten Schmutzler <git-ts@theblacksun.eu>
Acked-by: Eric Wong <normalperson@yhbt.net>
The use line was added in ffe256f9. File::Temp calls were later moved
to Git.pm in 0b19138b, but that commit neglected to remove the
now-redundant import.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Use the definite article when talking about a configuration property.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When "git svn reset" is called with an invalid revision, we
bail out and show the user a proper error message instead
of giving them a cryptic one related to git-svn internals.
ref: http://bugs.debian.org/578908
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Jens Seidel <jensseidel@users.sf.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
