This change allows parent rewriting to be performed without causing
the log and rev-list commands to print the parents.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of --first-parent is to view the tree without looking at
side branche. This is accomplished by pretending there are no other
parents than the first parent when encountering a merge.
The current code marks the other parents as seen, which means that the tree
traversal will behave differently depending on the order merges are handled.
When a fast forward is artificially recorded as a merge,
-----
/ \
D---E---F---G master
the current first-parent code considers E to be seen and stops the
traversal after showing G and F.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a new --children option to the revision machinery. In addition
to the list of parents, child commits of each commit are computed and
stored as a decoration to each commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
Jan Engelhardt noticed that while --topo-order can be overridden by a
subsequent --date-order, the reverse was not possible. That's because
setup_revisions() failed to set revs->lifo properly.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This attached patch introduces a single bit "use_terminator" in "struct
rev_info", which is normally false (i.e. most formats use separator
semantics) but by flipping it to true, you can ask for terminator
semantics just like oneline format does.
The function get_commit_format(), which is what parses "--pretty=" option,
now takes a pointer to "struct rev_info" and updates its commit_format and
use_terminator fields. It used to return the value of type "enum
cmit_fmt", but all the callers assigned it to rev->commit_format.
There are only two cases the code turns use_terminator on. Obviously, the
traditional oneline format (--pretty=oneline) is one of them, and the new
case is --pretty=tformat:... that acts like --pretty=format:... but flips
the bit on.
With this, "--pretty=tformat:%H %s" acts like --pretty=oneline.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision limiter uses the commit date to decide when it has seen
enough commits to finalize the revision list, but that can get confused
if there are incorrect dates far in the past on some commits.
This makes the logic a bit more robust by
- we always walk an extra SLOP commits from the source list even if we
decide that the source list is probably all done (unless the source is
entirely empty, of course, because then we really can't do anything at
all)
- we keep track of the date of the last commit we added to the
destination list (this will *generally* be the oldest entry we've seen
so far)
- we compare that with the youngest entry (the first one) of the source
list, and if the destination is older than the source, we know we want
to look at the source.
which causes occasional date mishaps to be handled cleanly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These flags are already known to rev-parse and have the same meaning.
This patch allows to run gitk as follows:
gitk --branches --not --remotes
to show only your local work.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for -F | --fixed-strings option to "git log --grep"
and friends: "git log --author", "git log --committer=<pattern>".
Code is based on implementation of this option in "git grep".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As these functions are directly called with the result
from lookup_tree/blob, they must handle NULL.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's really not very easy to visualize the commit walker, because - on
purpose - it obvously doesn't show the uninteresting commits!
This adds a "--show-all" flag to the revision walker, which will make
it show uninteresting commits too, and they'll have a '^' in front of
them (it also fixes a logic error for !verbose_header for boundary
commits - we should show the '-' even if left_right isn't shown).
A separate patch to gitk to teach it the new '^' was sent
to paulus. With the change in place, it actually is interesting
even for the cases that git doesn't have any problems with, ie
for the kernel you can do:
gitk -d --show-all v2.6.24..
and you see just how far down it has to parse things to see it all. The
use of "-d" is a good idea, since the date-ordered toposort is much better
at showing why it goes deep down (ie the date of some of those commits
after 2.6.24 is much older, because they were merged from trees that
weren't rebased).
So I think this is a useful feature even for non-debugging - just to
visualize what git does internally more.
When it actually breaks out due to the "everybody_uninteresting()"
case, it adds the uninteresting commits (both the one it's looking at
now, and the list of pending ones) to the list
This way, we really list *all* the commits we've looked at.
Because we now end up listing commits we may not even have been parsed
at all "show_log" and "show_commit" need to protect against commits
that don't have a commit buffer entry.
That second part is debatable just how it should work. Maybe we shouldn't
show such entries at all (with this patch those entries do get shown, they
just don't get any message shown with them). But I think this is a useful
case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the --relative option to say which subdirectory to
pretend to be in, so that in a bare repository, you can say:
$ git log --relative=drivers/ v2.6.20..v2.6.22 -- drivers/scsi/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds --relative option to the diff family. When you start
from a subdirectory:
$ git diff --relative
shows only the diff that is inside your current subdirectory,
and without $prefix part. People who usually live in
subdirectories may like it.
There are a few things I should also mention about the change:
- This works not just with diff but also works with the log
family of commands, but the history pruning is not affected.
In other words, if you go to a subdirectory, you can say:
$ git log --relative -p
but it will show the log message even for commits that do not
touch the current directory. You can limit it by giving
pathspec yourself:
$ git log --relative -p .
This originally was not a conscious design choice, but we
have a way to affect diff pathspec and pruning pathspec
independently. IOW "git log --full-diff -p ." tells it to
prune history to commits that affect the current subdirectory
but show the changes with full context. I think it makes
more sense to leave pruning independent from --relative than
the obvious alternative of always pruning with the current
subdirectory, which would break the symmetry.
- Because this works also with the log family, you could
format-patch a single change, limiting the effect to your
subdirectory, like so:
$ cd gitk-git
$ git format-patch -1 --relative 911f1eb
But because that is a special purpose usage, this option will
never become the default, with or without repository or user
preference configuration. The risk of producing a partial
patch and sending it out by mistake is too great if we did
so.
- This is inherently incompatible with --no-index, which is a
bolted-on hack that does not have much to do with git
itself. I didn't bother checking and erroring out on the
combined use of the options, but probably I should.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit b7bb760d5e (Fix revision
log diff setup, avoid unnecessary diff generation) an optimization was
made to avoid unnecessary diff generation. This was partly fixed in
99516e35d0 (Fix embarrassing "git log
--follow" bug). The '--diff-filter' option also needs the diff machinery
in action.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of warning the user that it is expecting git log output from
the standard input (and waiting for the user to type the log from
the keyboard, which is a silly thing to do), default to traverse from
HEAD when there is no rev parameter given and the standard input is
a tty.
This factors out a useful helper "add_head()" from builtin-diff.c to a
more appropriate place revision.c while renaming it to more descriptive
name add_head_to_pending(), as that is what the function is about.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/rev-list-interactive:
Fix parent rewriting in --early-output
revision walker: mini clean-up
Enhance --early-output format
Add "--early-output" log flag for interactive GUI use
Simplify topo-sort logic
We cannot tell a node that has been checked and found not to be
interesting (which does not have the TREECHANGE flag) from a
node that hasn't been checked if it is interesting or not,
without relying on something else, such as object->parsed.
But an object can get the "parsed" flag for other reasons.
Which means that "TREECHANGE" has the wrong polarity.
This changes the way how the path pruning logic marks an
uninteresting commits. From now on, we consider a commit
interesting by default, and explicitly mark the ones we decided
to prune. The flag is renamed to "TREESAME".
Then, this fixes the logic to show the early output with
incomplete pruning. It basically says "a commit that has
TREESAME set is kind-of-UNINTERESTING", but obviously in a
different way than an outright UNINTERESTING commit. Until we
parse and examine enough parents to determine if a commit
becomes surely "kind-of-UNINTERESTING", we avoid rewriting
the ancestry so that later rounds can fix things up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function mark_tree_uninteresting() assumed that the tree entries
are blob when they are not trees. This is not so. Since we do
not traverse into submodules (yet), the gitlinks should be ignored.
In general, we should try to start moving away from using the
"S_ISLNK()" like things for internal git state. It was a mistake to
just assume the numbers all were same across all systems in the first
place. This implementation converts to the "object_type", and then
uses a case statement.
Noticed by Ilari on IRC.
Test script taken from an earlier version by Dscho.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reverse_diff was a bit-value in disguise, it's merged in the flags now.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the unnecessary indirection of "revs->prune_fn",
since that function is always the same one (or NULL), and there
is in fact not even an abstraction reason to make it a function
(i.e. its not called from some other file and doesn't allow us
to keep the function itself static or anything like that).
It then just replaces it with a bit that says "prune or not",
and if not pruning, every commit gets TREECHANGE.
That in turn means that
- if (!revs->prune_fn || (flags & TREECHANGE))
- if (revs->prune_fn && !(flags & TREECHANGE))
just become
- if (flags & TREECHANGE)
- if (!(flags & TREECHANGE))
respectively.
Together with adding the "single_parent()" helper function, the "complex"
conditional now becomes
if (!(flags & TREECHANGE) && rev->dense && single_parent(commit))
continue;
Also indirection of "revs->dense" checking is thrown away the
same way, because TREECHANGE bit is set appropriately now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes --early-output a bit more advanced, and actually makes it
generate multiple "Final output:" headers as it updates things
asynchronously. I realize that the "Final output:" line is now illogical,
since it's not really final until it also says "done", but
It now _always_ generates a "Final output:" header in front of any commit
list, and that output header gives you a *guess* at the maximum number of
commits available. However, it should be noted that the guess can be
completely off: I do a reasonable job estimating it, but it is not meant
to be exact.
So what happens is that you may get output like this:
- at 0.1 seconds:
Final output: 2 incomplete
.. 2 commits listed ..
- half a second later:
Final output: 33 incomplete
.. 33 commits listed ..
- another half a second after that:
Final output: 71 incomplete
.. 71 commits listed ..
- another half second later:
Final output: 136 incomplete
.. 100 commits listed: we hit the --early-output limit, and
.. will only output 100 commits, and after this you'll not
.. see an "incomplete" report any more since you got as much
.. early output as you asked for!
- .. and then finally:
Final output: 73106 done
.. all the commits ..
The above is a real-life scenario on my current kernel tree after having
flushed all the caches.
Tested with the experimental gitk patch that Paul sent out, and by looking
at the actual log output (and verifying that my commit count guesses
actually match real life fairly well).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds support for "--early-output[=n]" as a flag to the "git log"
family of commands. This allows GUI programs to state that they want to
get some output early, in order to be able to show at least something
quickly, even if the full output may take longer to generate.
If no count is specified, a default count of a hundred commits will be
used, although the actual numbr of commits output may be smaller
depending on how many commits were actually found in the first tenth of
a second (or if *everything* was found before that, in which case no
early output will be provided, and only the final list is made
available).
When the full list is generated, there will be a "Final output:" string
prepended to it, regardless of whether any early commits were shown or
not, so that the consumer can always know the difference between early
output and the final list.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.. by not using quite so much indirection.
This currently grows the "struct commit" a bit, which could be avoided by
using a union for "util" and "indegree" (the topo-sort used to use "util"
anyway, so you cannot use them together), but for now the goal of this was
to simplify, not optimize.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out that I completely broke "git log --follow" with my recent
patch to revision.c ("Fix revision log diff setup, avoid unnecessary diff
generation", commit b7bb760d5e).
Why? Because --follow obviously requires the diff machinery to function,
exactly the same way pickaxe does.
So everybody is away right now, but considering that nobody even noticed
this bug, I don't think it matters. But for the record, here's the trivial
one-liner fix (well, two, since I also fixed the comment).
Because of the nature of the bug, if you ask for patches when following
(which is one of the things I normally do), the bug is hidden, because
then the request for diff output will automatically also enable the diffs
themselves.
So while "git log --follow <filename>" didn't work, adding a "-p"
magically made it work again even without this fix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Factor out the code to parse --date=<format> parameter to revision
walkers into a separate function, parse_date_format(). This function
is passed a string and converts it to an enum date_format:
- "relative" => DATE_RELATIVE
- "iso8601" or "iso" => DATE_ISO8601
- "rfc2822" => DATE_RFC2822
- "short" => DATE_SHORT
- "local" => DATE_LOCAL
- "default" => DATE_NORMAL
In the event that none of these strings is found, the function die()s.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to incorrectly start calculating diffs whenever any argument but
'-z' was recognized by the diff options parsing. That was bogus, since not
all arguments result in diffs being needed, so we just waste a lot of time
and effort on calculating diffs that don't matter.
This actually also fixes another bug in "git log". Try this:
git log -C
and notice how it prints an extra empty line in between log entries, even
though it never prints the actual diff (because we didn't ask for any diff
format, so the diff machinery never prints anything).
With this patch, that bogus empty line is gone, because "revs->diff" is
never set. So this isn't just a "wasted time and effort" issue, it's also
a slight semantic fix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to rely on the fact that cherry-pick would trigger the code path
to set limited = 1 in handle_commit(), when an uninteresting commit was
encountered.
However, when cherry picking between two independent branches, i.e. when
there are no merge bases, and there is only linear development (which can
happen when you cvsimport a fork of a project), no uninteresting commit
will be encountered.
So set limited = 1 when --cherry-pick was asked for.
Noticed by Martin Bähr.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" family of commands, even when run from a subdirectory,
do not limit the revision range with the current directory as
the path limiter, but with double-dash without any paths after
it, i.e. "git log --" do so. It was a mistake to have a
difference between "git log --" and "git log" introduced in
commit ae563542bf (First cut at
libifying revlist generation).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --walk-reflogs logic and the --reverse logic are completely
incompatible with one another. Attempting to use both at the same
time leads to confusing results that sometimes violates the user's
formatting options or ignores the user's request to see the reflog
message and timestamp.
Unfortunately the implementation of both of these features is glued
onto the side of the revision walking machinary in such a way that
they are probably not going to be easy to make them compatible with
each other. Rather than offering the user confusing results we are
better off bailing out with an error message until such a time as
the implementations can be refactored to be compatible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option git-log prints log message size
just before the corresponding message.
Porcelain tools could use this to speedup parsing
of git-log output.
Note that size refers to log message only. If also
patch content is shown its size is not included.
In case it is not possible to know the size upfront
size value is set to zero.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asking "git log -g --all", clearly you want to see only those refs
that do have reflogs, but you do not want it to fail, either.
So instead of die()ing, complain about it, but move on to the other refs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flag "no_walk" is present in struct rev_info since a long time, but
so far has been in use exclusively by "git show".
With this flag, you can see all your refs, ordered by date of the last
commit:
$ git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
which is extremely helpful if you have to juggle with a lot topic
branches, and do not remember in which one you introduced that uber
debug option, or simply want to get an overview what is cooking.
(Note that the "git log" invocation above does not output the same as
$ git show --abbrev-commit --pretty=oneline --decorate --all --quiet
since "git show" keeps the alphabetic order that "--all" returns the
refs in, even if the option "--date-order" was passed.)
For good measure, this also adds the "--do-walk" option which overrides
"--no-walk".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options to log family were too long to type. Give them
shorter synonyms.
Fix the parsing of the long options while at it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes duplicate parents properly, making gitk happy again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now we can use all internally supported date formats with
git log --date=<format>
syntax. Earlier, we only allowed relative/local/default.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you say --cherry-pick, you do not want to see patches which are
in the upstream. If you specify paths with that, what you usually
expect is that only those parts of the patches are looked at which
actually touch the given paths.
With this patch, that expectation is met.
Noticed by Sam Vilain.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we simplify history due to path limits, the parents list
for a rewritten commit can end up having duplicates. Instead of
filtering them out in the output codepath like earlier commit
88494423 did, remove them much earlier, when the parent
information actually gets rewritten.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change lets you use the format.subjectprefix config option to override the
default subject prefix.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ok, I've really held off doing this too damn long, because I'm lazy, and I
was always hoping that somebody else would do it.
But no, people keep asking for it, but nobody actually did anything, so I
decided I might as well bite the bullet, and instead of telling people
they could add a "--follow" flag to "git log" to do what they want to do,
I decided that it looks like I just have to do it for them..
The code wasn't actually that complicated, in that the diffstat for this
patch literally says "70 insertions(+), 1 deletions(-)", but I will have
to admit that in order to get to this fairly simple patch, you did have to
know and understand the internal git diff generation machinery pretty
well, and had to really be able to follow how commit generation interacts
with generating patches and generating the log.
So I suspect that while I was right that it wasn't that hard, I might have
been expecting too much of random people - this patch does seem to be
firmly in the core "Linus or Junio" territory.
To make a long story short: I'm sorry for it taking so long until I just
did it.
I'm not going to guarantee that this works for everybody, but you really
can just look at the patch, and after the appropriate appreciative noises
("Ooh, aah") over how clever I am, you can then just notice that the code
itself isn't really that complicated.
All the real new code is in the new "try_to_follow_renames()" function. It
really isn't rocket science: we notice that the pathname we were looking
at went away, so we start a full tree diff and try to see if we can
instead make that pathname be a rename or a copy from some other previous
pathname. And if we can, we just continue, except we show *that*
particular diff, and ever after we use the _previous_ pathname.
One thing to look out for: the "rename detection" is considered to be a
singular event in the _linear_ "git log" output! That's what people want
to do, but I just wanted to point out that this patch is *not* carrying
around a "commit,pathname" kind of pair and it's *not* going to be able to
notice the file coming from multiple *different* files in earlier history.
IOW, if you use "git log --follow", then you get the stupid CVS/SVN kind
of "files have single identities" kind of semantics, and git log will just
pick the identity based on the normal move/copy heuristics _as_if_ the
history could be linearized.
Put another way: I think the model is broken, but given the broken model,
I think this patch does just about as well as you can do. If you have
merges with the same "file" having different filenames over the two
branches, git will just end up picking _one_ of the pathnames at the point
where the newer one goes away. It never looks at multiple pathnames in
parallel.
And if you understood all that, you probably didn't need it explained, and
if you didn't understand the above blathering, it doesn't really mtter to
you. What matters to you is that you can now do
git log -p --follow builtin-rev-list.c
and it will find the point where the old "rev-list.c" got renamed to
"builtin-rev-list.c" and show it as such.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes and Marco discovered that "git log -z" spent cycles in diff even
though there is no need to actually compute diffs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces --extended-regexp and --regexp-ignore-case options to
tune what kind of patterns the pattern-limiting options (--grep, --author,
...) accept.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes a crash in broken repositories where random commits
suddenly disappear.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --date={local,relative,default} option to log family of commands,
to allow displaying timestamps in user's local timezone, relative time, or
the default format.
Existing --relative-date option is a synonym of --date=relative; we could
probably deprecate it in the long run.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/cherry:
Documentation: --cherry-pick
git-log --cherry-pick A...B
Refactor patch-id filtering out of git-cherry and git-format-patch.
Add %m to '--pretty=format:'
An earlier --subject-prefix patch forgot that format-patch is
not the only codepath that adds the "[PATCH]" prefix, and broke
everybody else in the log family.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is meant to be a saner replacement for "git-cherry".
When used with "A...B", this filters out commits whose patch
text has the same patch-id as a commit on the other side. It
would probably most useful to use with --left-right.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes a problem reported by Randal Schwartz:
>I finally tracked down all the (albeit inconsequential) errors I was getting
>on both OpenBSD and OSX. It's the warn() function in usage.c. There's
>warn(3) in BSD-style distros. It'd take a "great rename" to change it, but if
>someone with better C skills than I have could do that, my linker and I would
>appreciate it.
It was annoying to me, too, when I was doing some mergetool testing on
Mac OS X, so here's a fix.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Randal L. Schwartz" <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes slightly more lines than it adds, but the real reason for
doing this is that future optimizations will require more setup of the
tree descriptor, and so we want to do it in one place.
Also renamed the "desc.buf" field to "desc.buffer" just to trigger
compiler errors for old-style manual initializations, making sure I
didn't miss anything.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If your development history does not have fast-forward merges,
i.e. the "first parent" of commits in your history are special
than other parents, this option gives a better overview of the
evolution of a particular branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This uses diff-tree --quiet machinery to terminate the internal
diff-tree between a commit and its parents via revs.pruning (not
revs.diffopt) as soon as we find enough about the tree change.
With respect to the optionally given pathspec, we are interested
if the tree of commit is identical to the parent's, only adds
new paths to the parent's, or there are other differences. As
soon as we find out that there is one such other kind of
difference, we do not have to compare the rest of the tree.
Because we do not call standard diff_addremove/diff_change, we
instruct the diff-tree machinery to stop early by setting
has_changes when we say we found the trees to be different.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This explains how tree_difference variable is used, and updates two
places where the code knows symbolic constant REV_TREE_SAME is 0.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the list is truly limited and get_revision_1() returned NULL,
the code incorrectly returned it without switching to boundary emiting
mode. Silly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the code to set SHOWN on the commit from get_revision_1()
back to get_revision(), so that the bit means what it originally
meant: this commit has been given back to the caller.
Also it fixes the --reverse breakage Dscho pointed out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the flag internally used by revision traversal to
decide which commits are indeed boundaries and renames it to
CHILD_SHOWN. builtin-bundle uses the symbol for its
verification, but I think the logic it uses it is wrong. The
flag is still useful but it is local to the git-bundle, so it is
renamed to PREREQ_MARK.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the boundary processing in the commit walker. It
- rips out the boundary logic from the commit walker. Placing
"negative" commits in the revs->commits list was Ok if all we
cared about "boundary" was the UNINTERESTING limiting case,
but conceptually it was wrong.
- makes get_revision_1() function to walk the commits and return
the results as if there is no funny postprocessing flags such
as --reverse, --skip nor --max-count.
- makes get_revision() function the postprocessing phase:
If reverse is given, wait for get_revision_1() to give
everything that it would normally give, and then reverse it
before consuming.
If skip is given, skip that many before going further.
If max is given, stop when we gave out that many.
Now that we are about to return one positive commit, mark
the parents of that commit to be potential boundaries
before returning, iff we are doing the boundary processing.
Return the commit.
- After get_revision() finishes giving out all the positive
commits, if we are doing the boundary processing, we look at
the parents that we marked as potential boundaries earlier,
see if they are really boundaries, and give them out.
It loses more code than it adds, even when the new gc_boundary()
function, which is purely for early optimization, is counted.
Note that this patch is purely for eyeballing and discussion
only. It breaks git-bundle's verify logic because the logic
does not use BOUNDARY_SHOW flag for its internal computation
anymore. After we correct it not to attempt to affect the
boundary processing by setting the BOUNDARY_SHOW flag, we can
remove BOUNDARY_SHOW from revision.h and use that bit assignment
for the new CHILD_SHOWN flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
builtin-fmt-merge-msg: fix bugs in --file option
index-pack: Loop over pread until data loading is complete.
blameview: Fix the browse behavior in blameview
Fix minor typos/grammar in user-manual.txt
Correct ordering in git-cvsimport's option documentation
git-show: Reject native ref
Fix git-show man page formatting in the EXAMPLES section
So when we do
git show v1.4.4..v1.5.0
that's an illogical thing to do, since "git show" is defined to be a
non-revision-walking action, which means the range operator be pointless
and wrong. The fact that we happily accept it (and then _only_ show
v1.5.0, which is the positive end of the range) is quite arguably not very
logical.
We should complain, and say that you can only do "no_walk" with positive
refs. Negative object refs really don't make any sense unless you walk
the obejct list (or you're "git diff" and know about ranges explicitly).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were instances of strncmp() that were formatted improperly
(e.g. whitespace around parameter before closing parenthesis)
that caused the earlier mechanical conversion step to miss
them. This step cleans them up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, when saying --max-age=<timestamp>, or --max-count=<n>, together
with --boundary, rev-list prints the boundary commits, i.e. the
commits which are _just_ not shown without --boundary, i.e. their
children are, but they aren't.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Similar to commit eb8381c8, we need to use for_each_reflog() to make
sure we do not miss objects reachable from HEAD reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A short-hand "-g" for "git log --walk-reflogs" and "git
show-branch --reflog" makes it easier to access the reflog
info.
[jc: added -g to show-branch for symmetry]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The option --reverse reverses the order of the commits.
[jc: with comments on rev_info.reverse from Simon 'corecode' Schubert.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When called with "--walk-reflogs", as long as there are reflogs
available, the walker will take this information into account, rather
than the parent information in the commit object.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It used to ignore the return value of the helper function; now, it
expects it to return 0, and stops iteration upon non-zero return
values; this value is then passed on as the return value of
for_each_reflog_ent().
Further, it makes no sense to force the parsing upon the helper
functions; for_each_reflog_ent() now calls the helper function with
old and new sha1, the email, the timestamp & timezone, and the message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fsck-reflog:
Add git-reflog to .gitignore
reflog expire: do not punt on tags that point at non commits.
reflog expire: prune commits that are not incomplete
Don't crash during repack of a reflog with pruned commits.
git reflog expire
Move in_merge_bases() to commit.c
reflog: fix warning message.
Teach git-repack to preserve objects referred to by reflog entries.
Protect commits recorded in reflog from pruning.
add for_each_reflog_ent() iterator
If the user has been using reflog for a long time (e.g. since its
introduction) then it is very likely that an existing branch's
reflog may still mention commits which have long since been pruned
out of the repository.
Rather than aborting with a very useless error message during
git-repack, pack as many valid commits as we can get from the
reflog and let the user know that the branch's reflog contains
already pruned commits. A future 'git reflog expire' (or whatever
it finally winds up being called) can then be performed to expunge
those reflog entries.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a new option --reflog to pack-objects and revision
machinery; do not bother documenting it for now, since this is
only useful for local repacking.
When the option is passed, objects reachable from reflog entries
are marked as interesting while computing the set of objects to
pack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --skip=<n> option to revision traversal machinery.
Documentation and test were added by Robert Fitzsimons.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 5761231975.
Feeding symmetric difference to gitk is so useful, and it is the
same for other graphical Porcelains. Rather than forcing them
to pass --no-left-right, making it optional.
Noticed and reported by Jeff King.
When using symmetric differences, I think the user almost always
would want to know which side of the symmetry each commit came
from. So this removes --left-right option from the command
line, and turns it on automatically when a symmetric difference
is used ("git log --merge" counts as a symmetric difference
between HEAD and MERGE_HEAD).
Just in case, a new option --no-left-right is provided to defeat
this, but I do not know if it would be useful.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The output from "symmetric diff", i.e. A...B, does not
distinguish between commits that are reachable from A and the
ones that are reachable from B. In this picture, such a
symmetric diff includes commits marked with a and b.
x---b---b branch B
/ \ /
/ .
/ / \
o---x---a---a branch A
However, you cannot tell which ones are 'a' and which ones are
'b' from the output. Sometimes this is frustrating. This adds
an output option, --left-right, to rev-list.
rev-list --left-right A...B
would show ones reachable from A prefixed with '<' and the ones
reachable from B prefixed with '>'.
When combined with --boundary, boundary commits (the ones marked
with 'x' in the above picture) are shown with prefix '-', so you
would see list that looks like this:
git rev-list --left-right --boundary --pretty=oneline A...B
>bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 3rd on b
>bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 2nd on b
<aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 3rd on a
<aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 2nd on a
-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1st on b
-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1st on a
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lj/refs: (63 commits)
Fix show-ref usagestring
t3200: git-branch testsuite update
sha1_name.c: avoid compilation warnings.
Make git-branch a builtin
ref-log: fix D/F conflict coming from deleted refs.
git-revert with conflicts to behave as git-merge with conflicts
core.logallrefupdates thinko-fix
git-pack-refs --all
core.logallrefupdates create new log file only for branch heads.
Remove bashism from t3210-pack-refs.sh
ref-log: allow ref@{count} syntax.
pack-refs: call fflush before fsync.
pack-refs: use lockfile as everybody else does.
git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
lock_ref_sha1_basic does not remove empty directories on BSD
Do not create tag leading directories since git update-ref does it.
Check that a tag exists using show-ref instead of looking for the ref file.
Use git-update-ref to delete a tag instead of rm()ing the ref file.
Fix refs.c;:repack_without_ref() clean-up path
Clean up "git-branch.sh" and add remove recursive dir test cases.
...
This is a shorthand for "<rev> --not <rev>^@", i.e. "include
this commit but exclude any of its parents".
When a new file $F is introduced by revision $R, this notation
can be used to find a copy-and-paste from existing file in the
parents of that revision without annotating the ancestry of the
lines that were copied from:
git pickaxe -f -C $R^! -- $F
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
revision traversal: --unpacked does not limit commit list anymore.
Continue traversal when rev-list --unpacked finds a packed commit.
Use memmove instead of memcpy for overlapping areas
quote.c: ensure the same quoting across platforms.
Surround "#define DEBUG 0" with "#ifndef DEBUG..#endif"
When getting the list of all unpacked objects by walking the commit history,
we would stop traversal whenever we hit a packed commit. However the fact
that we found a packed commit does not guarantee that all previous commits
are also packed. As a result the commit walkers did not show all reachable
unpacked objects.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets you say:
git log --all-match --author=Linus --committer=Junio --grep=rev-list
to limit commits that was written by Linus, committed by me and
the log message contains word "rev-list".
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (72 commits)
runstatus: do not recurse into subdirectories if not needed
grep: fix --fixed-strings combined with expression.
grep: free expressions and patterns when done.
Corrected copy-and-paste thinko in ignore executable bit test case.
An illustration of rev-list --parents --pretty=raw
Allow git-checkout when on a non-existant branch.
gitweb: Decode long title for link tooltips
git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
Ignore executable bit when adding files if filemode=0.
Remove empty ref directories that prevent creating a ref.
Use const for interpolate arguments
git-archive: update documentation
Deprecate merge-recursive.py
gitweb: fix over-eager application of esc_html().
Allow '(no author)' in git-svn's authors file.
Allow 'svn fetch' on '(no date)' revisions in Subversion.
git-repack: allow git-repack to run in subdirectory
Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
git-tar-tree: Remove duplicate git_config() call
...
This adds a "int *flag" parameter to resolve_ref() and makes
for_each_ref() family to call callback function with an extra
"int flag" parameter. They are used to give two bits of
information (REF_ISSYMREF and REF_ISPACKED) about the ref.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a long overdue fix to the API for for_each_ref() family
of functions. It allows the callers to specify a callback data
pointer, so that the caller does not have to use static
variables to communicate with the callback funciton.
The updated for_each_ref() family takes a function of type
int (*fn)(const char *, const unsigned char *, void *)
and a void pointer as parameters, and calls the function with
the name of the ref and its SHA-1 with the caller-supplied void
pointer as parameters.
The commit updates two callers, builtin-name-rev.c and
builtin-pack-refs.c as an example.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now we can tell the built-in grep to grep only in head or in
body, use that to update --author, --committer, and --grep.
Unfortunately, to make --and, --not and other grep boolean
expressions useful, as in:
# Things written by Junio committed and by Linus and log
# does not talk about diff.
git log --author=Junio --and --committer=Linus \
--grep-not --grep=diff
we will need to do another round of built-in grep core
enhancement, because grep boolean expressions are designed to
work on one line at a time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I know that I'd prefer a rule where
"--author=^Junio"
would result in the grep-pattern being "^author Junio", but without the
initial '^' it would be "^author .*Junio".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds three options to setup_revisions(), which lets you
filter resulting commits by the author name, the committer name
and the log message with regexp.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is from a suggestion by Linus, just to mark the locations where we
need to modify to actually implement the filtering.
We do not have any actual filtering code yet.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Incremental repack without -a essentially boils down to:
rev-list --objects --unpacked --all |
pack-objects $new_pack
which picks up all loose objects that are still live and creates
a new pack.
This implements --unpacked=<existing pack> option to tell the
revision walking machinery to pretend as if objects in such a
pack are unpacked for the purpose of object listing. With this,
we could say:
rev-list --objects --unpacked=$active_pack --all |
pack-objects $new_pack
instead, to mean "all live loose objects but pretend as if
objects that are in this pack are also unpacked". The newly
created pack would be perfect for updating $active_pack by
replacing it.
Since pack-objects now knows how to do the rev-list's work
itself internally, you can also write the above example by:
pack-objects --unpacked=$active_pack --all $new_pack </dev/null
Signed-off-by: Junio C Hamano <junkio@cox.net>
setup_revisions() wants to get all the parameters at once and
then postprocesses the resulting revs structure after it is done
with them. This code structure is a bit cumbersome to deal with
efficiently when we want to inject revision parameters from the
side (e.g. read from standard input).
Fortunately, the nature of this postprocessing is not affected by
revision parameters; they are affected only by flags. So it is
Ok to do add_object() after the it returns.
This splits out the code that deals with the revision parameter
out of the main loop of setup_revisions(), so that we can later
call it from elsewhere after it returns.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Any git command that expects to work in a subdirectory of a project, and
that reads the git config files (which is just about all of them) needs to
make sure that it does the "setup_git_directory()" call before it tries to
read the config file.
This means, among other things, that we need to move the call out of
"init_revisions()", and into the caller.
This does the mostly trivial conversion to do that.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds Linus's wish, "--merge" flag, which makes the above
expand to a rough equivalent to:
git log -p HEAD MERGE_HEAD ^$(git-merge-base HEAD MERGE_HEAD) \
-- $(git-ls-files -u [paths...] | cut -f2 | uniq)
Signed-off-by: Junio C Hamano <junkio@cox.net>
* th/diff:
builtin-diff: turn recursive on when defaulting to --patch format.
t4013: note improvements brought by the new output code.
t4013: add format-patch tests.
format-patch: fix diff format option implementation
combine-diff.c: type sanity.
t4013 test updates for new output code.
Fix some more diff options changes.
Fix diff-tree -s
log --raw: Don't descend into subdirectories by default
diff-tree: Use ---\n as a message separator
Print empty line between raw, stat, summary and patch
t4013: add more tests around -c and --cc
whatchanged: Default to DIFF_FORMAT_RAW
Don't xcalloc() struct diffstat_t
Add msg_sep to diff_options
DIFF_FORMAT_RAW is not default anymore
Set default diff output format after parsing command line
Make --raw option available for all diff commands
Merge with_raw, with_stat and summary variables to output_format
t4013: add tests for diff/log family output options.
Johannes noticed the missing call to free_commit_list() in the
patch from Santi to add ... support to rev-parse. Turns out I
forgot it too in rev-list. This patch is against the next branch
(3b1d06a).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change get_merge_bases() to be able to clean up after itself if
needed by adding a cleanup parameter.
We don't need to save the flags and restore them afterwards anymore;
that was a leftover from before the flags were moved out of the
range used in revision.c. clear_commit_marks() sets them to zero,
which is enough.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It had the wrong test for whether a commit was a merge. What it did was to
say that a non-merge has exactly one parent (which sounds almost right),
but the fact is, initial trees have no parent at all, but they're
obviously not merges.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With history simplification, we still show merges that are required
to make the history _complete_, i.e. say that you had:
a
|
b
/ \
c d
| |
and neither "a" nor "b" actually changed the file, but both "c" and "d"
did: in this case we have to leave "b" around just because otherwise there
would be no way to show the _relationship_, even if "b" itself doesn't
actually change the tree in any way what-so-ever.
It would make sense to make that further simplification if the
"--parents" flag wasn't present. In that case the user is
literally asking for a list of commits and is not interested in
the relationship between them.
This patch also fixes a real bug. Without this patch, the
"--parents --full-history" combination (which you'd get if you
do something like
gitk --full-history Makefile
or similar) will actually _drop_ merges where all children are identical.
That's wrong in the --full-history case, because it means that the graph
ends up missing lots of entries.
In the process, this also should make
git-rev-list --full-history Makefile
give just the _true_ list of all commits that changed Makefile (and
properly ignore merges that were identical in one parent), because now
we're not asking for "--parent", so we don't need the unnecessary merge
commits to keep the history together.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
'A...B' is a shortcut for 'A B --not $(git-merge-base --all A B)'.
This XOR-like operation is called symmetric difference in set
theory.
The symbol '...' has been chosen because it's rather similar to the
existing '..' operator and the somewhat more natural caret ('^') is
already taken.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff_setup() used to initialize output_format to DIFF_FORMAT_RAW. Now
the default is 0 (no output) so don't compare against DIFF_FORMAT_RAW to
see if any diff format command line flags were given.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We've had this notion of a "object_list" for a long time, which eventually
grew a "name" member because some users (notably git-rev-list) wanted to
name each object as it is generated.
That object_list is great for some things, but it isn't all that wonderful
for others, and the "name" member is generally not used by everybody.
This patch splits the users of the object_list array up into two: the
traditional list users, who want the list-like format, and who don't
actually use or want the name. And another class of users that really used
the list as an extensible array, and generally wanted to name the objects.
The patch is fairly straightforward, but it's also biggish. Most of it
really just cleans things up: switching the revision parsing and listing
over to the array makes things like the builtin-diff usage much simpler
(we now see exactly how many members the array has, and we don't get the
objects reversed from the order they were on the command line).
One of the main reasons for doing this at all is that the malloc overhead
of the simple object list was actually pretty high, and the array is just
a lot denser. So this patch brings down memory usage by git-rev-list by
just under 3% (on top of all the other memory use optimizations) on the
mozilla archive.
It does add more lines than it removes, and more importantly, it adds a
whole new infrastructure for maintaining lists of objects, but on the
other hand, the new dynamic array code is pretty obvious. The change to
builtin-diff-tree.c shows a fairly good example of why an array interface
is sometimes more natural, and just much simpler for everybody.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is really the dregs of my effort to not waste memory in git-rev-list,
and makes barely one percent of a difference in the memory footprint, but
hey, it's also a pretty small patch.
It discards the parent lists and the commit buffer after the commit has
been shown by git-rev-list (and "git log" - which already did the commit
buffer part), and frees the commit list entry that was used by the
revision walker.
The big win would be to get rid of the "refs" pointer in the object
structure (another 5%), because it's only used by fsck. That would require
some pretty major surgery to fsck, though, so I'm timid and did the less
interesting but much easier part instead.
This (percentually) makes a bigger difference to "git log" and friends,
since those are walking _just_ commits, and thus the list entries tend to
be a bigger percentage of the memory use. But the "list all objects" case
does improve too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This does:
- add a "rev.simplify_history" flag which defaults to on
- it turns it off for "git whatchanged" (which thus now has real
semantics outside of "git log")
- it adds a command line flag ("--full-history") to turn it off for
others (ie you can make "git log" and "gitk" etc get the semantics if
you want to.
Now, just as an example of _why_ you really really really want to simplify
history by default, apply this patch, install it, and try these two
command lines:
gitk --full-history -- git.c
gitk -- git.c
and compare the output.
So with this, you can also now do
git whatchanged -p -- gitweb.cgi
git log -p --full-history -- gitweb.cgi
and it will show the old history of gitweb.cgi, even though it's not
relevant to the _current_ state of the name "gitweb.cgi"
NOTE NOTE NOTE! It will still actually simplify away merges that didn't
change anything at all into either child. That creates these bogus strange
discontinuities if you look at it with "gitk" (look at the --full-history
gitk output for git.c, and you'll see a few strange cases).
So the whole "--parent" thing ends up somewhat bogus with --full-history
because of this, but I'm not sure it's worth even worrying about. I don't
think you'd ever want to really use "--full-history" with the graphical
representation, I just give it as an example exactly to show _why_ doing
so would be insane.
I think this is trivial enough and useful enough to be worth merging into
the stable branch.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "tree_entry()" function that combines the common operation of
doing a "tree_entry_extract()" + "update_tree_entry()".
It also has a simplified calling convention, designed for simple loops
that traverse over a whole tree: the arguments are pointers to the tree
descriptor and a name_entry structure to fill in, and it returns a boolean
"true" if there was an entry left to be gotten in the tree.
This allows tree traversal with
struct tree_desc desc;
struct name_entry entry;
desc.buf = tree->buffer;
desc.size = tree->size;
while (tree_entry(&desc, &entry) {
... use "entry.{path, sha1, mode, pathlen}" ...
}
which is not only shorter than writing it out in full, it's hopefully less
error prone too.
[ It's actually a tad faster too - we don't need to recalculate the entry
pathlength in both extract and update, but need to do it only once.
Also, some callers can avoid doing a "strlen()" on the result, since
it's returned as part of the name_entry structure.
However, by now we're talking just 1% speedup on "git-rev-list --objects
--all", and we're definitely at the point where tree walking is no
longer the issue any more. ]
NOTE! Not everybody wants to use this new helper function, since some of
the tree walkers very much on purpose do the descriptor update separately
from the entry extraction. So the "extract + update" sequence still
remains as the core sequence, this is just a simplified interface.
We should probably add a silly two-line inline helper function for
initializing the descriptor from the "struct tree" too, just to cut down
on the noise from that common "desc" initializer.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, just use the tree buffer directly, and use the tree-walk
infrastructure to walk the buffers instead of the tree-entry list.
The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is
generally no harder to use than following a linked list, and allows
us to do most tree parsing in-place.
Some programs still use the old tree-entry lists, and are a bit
painful to convert without major surgery. For them we have a helper
function that creates a temporary tree-entry list on demand.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is preparatory work for further cleanups, where we try to make
tree_entry look more like the more efficient tree-walk descriptor.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The revision argument parsing was happily parsing "--abbrev", but it
didn't parse "--abbrev=<n>".
Which was hidden by the fact that the diff options _would_ parse
--abbrev=<n>, so it would actually silently parse it, it just
wouldn't use it for the same things that a plain "--abbrev" was
used for.
Which seems a bit insane.
With this patch, if you do "git log --abbrev=10" it will abbreviate the
merge parent commit ID's to ten hex characters, which was probably what
you expected.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A short-hand "rev^@" is understood to be "all parents of the
named commit" with this patch. So you can do
git show v1.0.0^@
to view the parents of a merge commit,
gitk ^v1.0.0^@ v1.0.4
to view the log between two revs (including the bottom one), and
git diff --cc v1.1.0 v1.0.0^@
to inspect what got changed from the merge parents of v1.0.0 to v1.1.0.
This might be just my shiny new toy that is not very useful in
practice. I needed it to do the multi-tree diff on Len's
infamous 12-way Octopus; typing "diff --cc funmerge funmerge^1
funmerge^2 funmerge^3 ..." was too painful.
[jc: taking suggestions from Linus and Johannes to match expectations
from shell users who are used to see $@ or $* either of which makes
sense. I tend to write "$@" more often so...]
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git diff(n)" without --base, --ours, etc. defaults to --cc,
which usually is the same as -p unless you are in the middle of
a conflicted merge, just like the shell script version.
"git diff(n) blobA blobB path" complains and dies.
"git diff(n) tree0 tree1 tree2...treeN" does combined diff that
shows a merge of tree1..treeN to result in tree0.
Giving "-c" option to any command that defaults to "--cc" turns
off dense-combined flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you don't have a "--" marker, then:
- all of the arguments we are going to assume are pathspecs
must exist in the working tree.
- none of the arguments we parsed as revisions could be
interpreted as a filename.
so that there really isn't any possibility of confusion in case
somebody does have a revision that looks like a pathname too.
The former rule has been in effect; this implements the latter.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
When we are in a subdirectory of a git archive, we need to take the prefix
of that subdirectory into accoung when we verify filename arguments.
Noted by Matthias Lederhofer
This also uses the improved error reporting for all the other git commands
that use the revision parsing interfaces, not just git-rev-parse. Also, it
makes the error reporting for mixed filenames and argument flags clearer
(you cannot put flags after the start of the pathname list).
[jc: with fix to a trivial typo noticed by Timo Hirvonen]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When I unified the revision argument parsing, I introduced a simple bug
wrt tags that had been marked uninteresting. When it was preparing for the
revision walk, it would mark all the parent commits of an uninteresting
tag correctly uninteresting, but it would forget about the commit itself.
This means that when I just did my 2.6.17-rc2 release, and my scripts
generated the log for "v2.6.17-rc1..v2.6.17-rc2", everything was fine,
except the commit pointed to by 2.6.17-rc1 (which shouldn't have been
there) was included. Even though it should obviously have been marked as
being uninteresting.
Not a huge deal, and the fix is trivial.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
Fixes for option parsing
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
Just like "patch" format always needs recursive, "diffstat"
format does not make sense without setting recursive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
free(commit->buffer);
commit->buffer = NULL;
}
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The boundary commits are shown for UI like gitk to draw them as
soon as topo-order sorting allows, and should not be omitted by
get_revision() filtering logic. As long as their immediate
child commits are shown, we should not filter them out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This uses the "--no-walk" flag that I never actually implemented (but I'm
sure I mentioned it) to make "git show" be essentially the same thing as
"git whatchanged --no-walk".
It just refuses to add more interesting parents to the revision walking
history, so you don't actually get any history, you just get the commit
you asked for.
I was going to add "--no-walk" as a real argument flag to git-rev-list
too, but I'm not sure anybody actually needs it. Although it might be
useful for porcelain, so I left the door open.
[jc: ported to the unified option structure by Linus]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merging all three option parsers related to whatchanged is
unarguably the right thing, but the fallout was too big to scare
me away. Let's try it once again, but once step at time.
This splits out init_revisions() call from setup_revisions(), so
that the callers can set different defaults to match the
traditional benaviour.
The rev-list command is still broken in a big way, which is the
topic of next step.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This basically does a few things that are sadly somewhat interdependent,
and nontrivial to split out
- get rid of "struct log_tree_opt"
The fields in "log_tree_opt" are moved into "struct rev_info", and all
users of log_tree_opt are changed to use the rev_info struct instead.
- add the parsing for the log_tree_opt arguments to "setup_revision()"
- make setup_revision set a flag (revs->diff) if the diff-related
arguments were used. This allows "git log" to decide whether it wants
to show diffs or not.
- make setup_revision() also initialize the diffopt part of rev_info
(which we had from before, but we just didn't initialize it)
- make setup_revision() do all the "finishing touches" on it all (it will
do the proper flag combination logic, and call "diff_setup_done()")
Now, that was the easy and straightforward part.
The slightly more involved part is that some of the programs that want to
use the new-and-improved rev_info parsing don't actually want _commits_,
they may want tree'ish arguments instead. That meant that I had to change
setup_revision() to parse the arguments not into the "revs->commits" list,
but into the "revs->pending_objects" list.
Then, when we do "prepare_revision_walk()", we walk that list, and create
the sorted commit list from there.
This actually cleaned some stuff up, but it's the less obvious part of the
patch, and re-organized the "revision.c" logic somewhat. It actually paves
the way for splitting argument parsing _entirely_ out of "revision.c",
since now the argument parsing really is totally independent of the commit
walking: that didn't use to be true, since there was lots of overlap with
get_commit_reference() handling etc, now the _only_ overlap is the shared
(and trivial) "add_pending_object()" thing.
However, I didn't do that file split, just because I wanted the diff
itself to be smaller, and show the actual changes more clearly. If this
gets accepted, I'll do further cleanups then - that includes the file
split, but also using the new infrastructure to do a nicer "git diff" etc.
Even in this form, it actually ends up removing more lines than it adds.
It's nice to note how simple and straightforward this makes the built-in
"git log" command, even though it continues to support all the diff flags
too. It doesn't get much simpler that this.
I think this is worth merging soonish, because it does allow for future
cleanup and even more sharing of code. However, it obviously touches
"revision.c", which is subtle. I've tested that it passes all the tests we
have, and it passes my "looks sane" detector, but somebody else should
also give it a good look-over.
[jc: squashed the original and three "oops this too" updates, with
another fix-up.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes things that include revision.h build again.
Blame is also built, but I am not sure how well it works (or how
well it worked to begin with) -- it was relying on tree-diff to
be using whatever pathspec was used the last time, which smells
a bit suspicious.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The way tree-diff was set up assumed we would use only one set
of pathspec during the entire life of the program. Move the
pathspec related static variables out to diff_options structure
so that we can filter commits with one set of paths while show
the actual diffs using different set of paths.
I suspect this breaks blame.c, and makes "git log paths..." to
default to the --full-diff, the latter of which is dealt with
the next commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The parent rewriting feature caused us to create the whole history in one
go, and then simplify it later, because of how rewrite_parents() had been
written. However, with a little tweaking, it's perfectly possible to do
even that one incrementally.
Right now, this doesn't really much matter, because every user of
"--parents" will probably generally _also_ use "--topo-order", which will
cause the old non-incremental behaviour anyway. However, I'm hopeful that
we could make even the topological sort incremental, or at least
_partially_ so (for example, make it incremental up to the first merge).
In the meantime, this at least moves things in the right direction, and
removes a strange special case.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces occurences of "blob", "commit", "tag", and "tree",
where they're really used as type specifiers, which we already
have defined global constants for.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This just moves code around to consolidate the part that sets
revs->limited to one place based on various flags.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, using --unpacked without limit_list() does not make much
sense, but this is parallel to the earlier --max-age fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
What ends up not working very well at all is the combination of
"--topo-order" and the output filter in get_revision. It will
return NULL when we see the first commit out of date-order, even
if we have other commits coming.
So we really should do the "past the date order" thing in
get_revision() only if we have _not_ done it already in
limit_list().
Something like this.
The easiest way to test this is with just
gitk --since=3.days.ago
on the kernel tree. Without this patch, it tends to be pretty obviously
broken.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes git-rev-list able to do path-limiting without having to parse
all of history before it starts showing the results.
This makes things like "git log -- pathname" much more pleasant to use.
This is actually a pretty small patch, and the biggest part of it is
purely cleanups (turning the "goto next" statements into "continue"), but
it's conceptually a lot bigger than it looks.
What it does is that if you do a path-limited revision list, and you do
_not_ ask for pseudo-parenthood information, it won't do all the
path-limiting up-front, but instead do it incrementally in
"get_revision()".
This is an absolutely huge deal for anything like "git log -- <pathname>",
but also for some things that we don't do yet - like the "find where
things changed" logic I've described elsewhere, where we want to find the
previous revision that changed a file.
The reason I put "RFC" in the subject line is that while I've validated it
various ways, like doing
git-rev-list HEAD -- drivers/char/ | md5sum
before-and-after on the kernel archive, it's "git-rev-list" after all. In
other words, it's that really really subtle and complex central piece of
software. So while I think this is important and should go in asap, I also
think it should get lots of testing and eyeballs looking at the code.
Btw, don't even bother testing this with the git archive. git itself is so
small that parsing the whole revision history for it takes about a second
even with path limiting. The thing that _really_ shows this off is doing
git log drivers/
on the kernel archive, or even better, on the _historic_ kernel archive.
With this change, the response is instantaneous (although seeking to the
end of the result will obviously take as long as it ever did). Before this
change, the command would think about the result for tens of seconds - or
even minutes, in the case of the bigger old kernel archive - before
starting to output the results.
NOTE NOTE NOTE! Using path limiting with things like "gitk", which uses
the "--parents" flag to actually generate a pseudo-history of the
resulting commits won't actually see the improvement in interactivity,
since that forces git-rev-list to do the whole-history thing after all.
MAYBE we can fix that too at some point, but I won't promise anything.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not only do we do it in both rev-list.c and git.c, the revision walking
code will soon want to know whether we should rewrite parenthood
information or not.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Marco reported that
$ git rev-list --boundary --topo-order --parents 5aa44d5..ab57c8d
misses these two boundary commits.
c649657501eb38cc689e
Indeed, we can see that gitk shows these two commits at the
bottom, because the --boundary code failed to output them.
The code did not check to avoid pushing the same uninteresting
commit twice to the result list. I am not sure why this fixes
the reported problem, but this seems to fix it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier change to make "..B" to mean "HEAD..B" (aka ^HEAD B)
has constness gotcha GCC complains. Fix it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
For consistency reasons, we should probably allow that to be written as
just "..branch", the same way we can write "branch.." to mean "everything
in HEAD but not in "branch".
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new --boundary flag, the output from rev-list includes
the UNINTERESING commits at the boundary, which are usually not
shown. Their object names are prefixed with '-'.
For example, with this graph:
C side
/
A---B---D master
You would get something like this:
$ git rev-list --boundary --header --parents side..master
D B
tree D^{tree}
parent B
... log message for commit D here ...
\0-B A
tree B^{tree}
parent A
... log message for commit B here ...
\0
Signed-off-by: Junio C Hamano <junkio@cox.net>
When passing in a pathname pattern without the "--" separator on the
command line, we verify that the pathnames in question exist. However,
there were two bugs in that verification:
- git-rev-parse would only check the first pathname, and silently allow
any invalid subsequent pathname, whether it existed or not (which
defeats the purpose of the check, and is also inconsistent with what
git-rev-list actually does)
- git-rev-list (and "git log" etc) would check each filename, but if the
check failed, it would print the error using the first one, i.e.:
[torvalds@g5 git]$ git log Makefile bad-file
fatal: 'Makefile': No such file or directory
instead of saying that it's 'bad-file' that doesn't exist.
This fixes both bugs.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Marco Costalba reports that --remove-empty omits the commit that
created paths we are interested in. try_to_simplify_commit()
logic was dropping a parent we introduced those paths against,
which I think is not what we meant. Instead, this makes such
parent parentless.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Marco Costalba reports that --remove-empty omits the commit that
created paths we are interested in. try_to_simplify_commit()
logic was dropping a parent we introduced those paths against,
which I think is not what we meant. Instead, this marks such
parent uninteresting. The traversal does not go beyond that
parent as advertised, but we still say that the current commit
changed things from that parent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
prune_fn in the rev_info structure is called in place of
try_to_simplify_commit. This makes it possible to do rename tracking
with a custom try_to_simplify_commit-like function.
This commit also introduces init_revisions which initialises the rev_info
structure with default values.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When git-rev-list (and git-log) collapsed ancestry chain to
commits that touch specified paths, we failed to inspect and
notice tree changes when we are about to hit uninteresting
parent. This resulted in "git rev-list since.. -- file" to
always show the child commit after the lower bound, even if it
does not touch the file. This commit fixes it.
Thanks for Catalin for reporting this.
See also:
461cf59f89
Signed-off-by: Junio C Hamano <junkio@cox.net>
revision.c:make_parents_uninteresting() is exponential with the number
of merges in the tree. That's fine -- unless some other part of git
already has pulled the whole commit tree into memory ...
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the handling of max-count shorthand from the internal
implementation of "git log" to setup_revisions() so other users
of setup_revisions() can use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Well, assuming breaking --merge-order is fine, here's a patch (on top of
the other ones) that makes
git log <filename>
actually work, as far as I can tell.
I didn't add the logic for --before/--after flags, but that should be
pretty trivial, and is independent of this anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This actually moves the "meat" of the revision walking from rev-list.c
to the new library code in revision.h. It introduces the new functions
void prepare_revision_walk(struct rev_info *revs);
struct commit *get_revision(struct rev_info *revs);
to prepare and then walk the revisions that we have.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the rewrite easier to validate in that revision flag
parsing and warlking part are now all in rev_info structure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This really just splits things up partially, and creates the
interface to set things up by parsing the command line.
No real code changes so far, although the parsing of filenames is a bit
stricter. In particular, if there is a "--", then we do not accept any
filenames before it, and if there isn't any "--", then we check that _all_
paths listed are valid, not just the first one.
The new argument parsing automatically also gives us "--default" and
"--not" handling as in git-rev-parse.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
