"git status --short" quoted a path with SP in it when tracked, but
not those that are untracked, ignored or unmerged. They are all
shown quoted consistently.
* jc/quote-path-cleanup:
quote: turn 'nodq' parameter into a set of flags
quote: rename misnamed sq_lookup[] to cq_lookup[]
wt-status: consistently quote paths in "status --short" output
quote_path: code clarification
quote_path: optionally allow quoting a path with SP in it
quote_path: give flags parameter to quote_path()
quote_path: rename quote_path_relative() to quote_path()
Tracked paths with SP in them were cquoted in "git status --short"
output, but untracked, ignored, and unmerged paths weren't.
The test was stolen from a patch to fix output for the 'untracked'
paths by brian m. carlson, with similar tests added for 'ignored'
ones.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some code in wt-status.c special case a path with SP in it, which
usually does not have to be c-quoted, and ensure that such a path
does get quoted. Move the logic to quote_path() and give it a bit
in the flags word, QUOTE_PATH_QUOTE_SP.
No behaviour change intended.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The quote_path() function computes a path (relative to its base
directory) and c-quotes the result if necessary. Teach it to take a
flags parameter to allow its behaviour to be enriched later.
No behaviour change intended.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no quote_path_absolute() or anything that causes confusion,
and one of the two large consumers already rename the long name
locally with a preprocessor macro.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accesses to two pseudorefs have been updated to properly use ref
API.
* hn/refs-pseudorefs:
sequencer: treat REVERT_HEAD as a pseudo ref
builtin/commit: suggest update-ref for pseudoref removal
sequencer: treat CHERRY_PICK_HEAD as a pseudo ref
refs: make refs_ref_exists public
Check for existence and delete CHERRY_PICK_HEAD through ref functions.
This will help cherry-pick work with alternate ref storage backends.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dir structure seemed to have a number of leaks and problems around
it. First I noticed that parent_hashmap and recursive_hashmap were
being leaked (though Peff noticed and submitted fixes before me). Then
I noticed in the previous commit that clear_directory() was only taking
responsibility for a subset of fields within dir_struct, despite the
fact that entries[] and ignored[] we allocated internally to dir.c.
That, of course, resulted in many callers either leaking or haphazardly
trying to free these arrays and their contents.
Digging further, I found that despite the pretty clear documentation
near the top of dir.h that folks were supposed to call clear_directory()
when the user no longer needed the dir_struct, there were four callers
that didn't bother doing that at all. However, two of them clearly
thought about leaks since they had an UNLEAK(dir) directive, which to me
suggests that the method to free the data was too unclear. I suspect
the non-obviousness of the API and its holes led folks to avoid it,
which then snowballed into further problems with the entries[],
ignored[], parent_hashmap, and recursive_hashmap problems.
Rename clear_directory() to dir_clear() to be more in line with other
data structures in git, and introduce a dir_init() to handle the
suggested memsetting of dir_struct to all zeroes. I hope that a name
like "dir_clear()" is more clear, and that the presence of dir_init()
will provide a hint to those looking at the code that they need to look
for either a dir_clear() or a dir_free() and lead them to find
dir_clear().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The calling convention for the dir API is supposed to end with a call to
clear_directory() to free up no longer needed memory. However,
clear_directory() didn't free dir->entries or dir->ignored. I believe
this was an oversight, but a number of callers noticed memory leaks and
started free'ing these. Unfortunately, they did so somewhat haphazardly
(sometimes freeing the entries in the arrays, and sometimes only
free'ing the arrays themselves). This suggests the callers weren't
trying to make sure any possible memory used might be free'd, but just
the memory they noticed their usecase definitely had allocated.
Fix this mess by moving all the duplicated free'ing logic into
clear_directory(). End by resetting dir to a pristine state so it could
be reused if desired.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the early feedback of folks trying out sparse-checkouts at
$dayjob is that sparse checkouts can sometimes be disorienting; users
can forget that they had a sparse-checkout and then wonder where files
went. Add some output to 'git status' in the form of a simple line that
states:
You are in a sparse checkout with 35% of files present.
where, obviously, the exact figure changes depending on what percentage
of files from the index do not have the SKIP_WORKTREE bit set.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, the expected calling convention for the dir.c API was:
fill_directory(&dir, ..., pathspec)
foreach entry in dir->entries:
if (dir_path_match(entry, pathspec))
process_or_display(entry)
This may have made sense once upon a time, because the fill_directory() call
could use cheap checks to avoid doing full pathspec matching, and an external
caller may have wanted to do other post-processing of the results anyway.
However:
* this structure makes it easy for users of the API to get it wrong
* this structure actually makes it harder to understand
fill_directory() and the functions it uses internally. It has
tripped me up several times while trying to fix bugs and
restructure things.
* relying on post-filtering was already found to produce wrong
results; pathspec matching had to be added internally for multiple
cases in order to get the right results (see commits 404ebceda0
(dir: also check directories for matching pathspecs, 2019-09-17)
and 89a1f4aaf7 (dir: if our pathspec might match files under a
dir, recurse into it, 2019-09-17))
* it's bad for performance: fill_directory() already has to do lots
of checks and knows the subset of cases where it still needs to do
more checks. Forcing external callers to do full pathspec
matching means they must re-check _every_ path.
So, add the pathspec matching within the fill_directory() internals, and
remove it from external callers.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
When reverting or cherry-picking, one of the options we can pass the
sequencer is `--skip`. However, unlike rebasing, `--skip` is not
mentioned as a possible option in the status message. Mention it so that
users are more aware of their options.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change struct wt_status to use struct object_id instead of an array of
unsigned char.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" can be told a non-standard default value for the
"--[no-]ahead-behind" option with a new configuration variable
status.aheadBehind.
* jh/status-aheadbehind:
status: ignore status.aheadbehind in porcelain formats
status: warn when a/b calculation takes too long
status: add status.aheadbehind setting
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
"git branch --list" learned to always output the detached HEAD as
the first item (when the HEAD is detached, of course), regardless
of the locale.
* md/sort-detached-head-first:
ref-filter: sort detached HEAD lines firstly
The ahead/behind calculation in 'git status' can be slow in some
cases. Users may not realize that there are ways to avoid this
computation, especially if they are not using the information.
Add a warning that appears if this calculation takes more than
two seconds. The warning can be disabled through the new config
setting advice.statusAheadBehind.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, there is inconsistency between the status
messages with hints and the ones without hints: there is an
empty line between the title and the file list if hints are
presented, but there isn't one if there are no hints.
This patch remove the inconsistency by removing the empty
lines even if hints are presented.
Signed-off-by: John Lin <johnlinp@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, "git branch" would put "(HEAD detached...)" and "(no
branch, rebasing...)" lines before all the other branches *in most
cases* except for when using Chinese-language messages. zh_CN generally
uses a full-width "(" symbol (codepoint FF08) to match the full-width
proportions of Chinese characters, and the translated strings we had did
use them. This meant that the detached HEAD line would appear after all
local refs and even after the remote refs if there were any.
AFAIK, it is sometimes not jarring to see the half-width parenthesis in
"full-width" text as in the CJK languages, for instance when there are
no characters preceding or following the parenthesized text fragment. By
removing the parenthesis from the localizable text, we can share strings
with wt-status.c and remove a cautionary comment to translators.
Remove the ( from the localizable portion of messages so the sorting
happens properly regardless of locale.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/unused-params-final-batch:
verify-commit: simplify parameters to run_gpg_verify()
show-branch: drop unused parameter from show_independent()
rev-list: drop unused void pointer from finish_commit()
remove_all_fetch_refspecs(): drop unused "remote" parameter
receive-pack: drop unused "commands" from prepare_shallow_update()
pack-objects: drop unused rev_info parameters
name-rev: drop unused parameters from is_better_name()
mktree: drop unused length parameter
wt-status: drop unused status parameter
read-cache: drop unused parameter from threaded load
clone: drop dest parameter from copy_alternates()
submodule: drop unused prefix parameter from some functions
builtin: consistently pass cmd_* prefix to parse_options
cmd_{read,write}_tree: rename "unused" variable that is used
"git status" did not know that the "label" instruction in the
todo-list "rebase -i -r" uses should not be shown as a hex object
name.
* js/rebase-i-label-shown-in-status-fix:
status: fix display of rebase -ir's `label` command
"git chery-pick" (and "revert" that shares the same runtime engine)
that deals with multiple commits got confused when the final step
gets stopped with a conflict and the user concluded the sequence
with "git commit". Attempt to fix it by cleaning up the state
files used by these commands in such a situation.
* pw/clean-sequencer-state-upon-final-commit:
fix cherry-pick/revert status after commit
commit/reset: try to clean up sequencer state
The argument of a `label` command does *not* want to be turned into an
abbreviated SHA-1.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The v2_fix_up_changed() function doesn't actually need to see the
wt_status struct. It's possible that could change in the future, but
this is a static-local function with one caller. It would be easy to
read-add it back then. Let's drop the unused parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%(push:track) token used in the --format option to "git
for-each-ref" and friends was not showing the right branch, which
has been fixed.
* dr/ref-filter-push-track-fix:
ref-filter: use correct branch for %(push:track)
The new command "git restore" (together with "git switch") are added
to avoid the confusion of one-command-do-all "git checkout" for new
users. They are also helpful to avoid ambiguous context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands.
One nice thing about git-restore is the ability to restore
"everything", so it can be used in "git status" advice instead of both
"git checkout" and "git reset". The three commands suggested by "git
status" are add, rm and restore.
"git checkout" is also removed from "git help" (i.e. it's no longer
considered a commonly used command)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change allows git-merge messages to be cleaned up with the
commit.cleanup configuration or --cleanup option, just like how
git-commit does it.
We also give git-pull the option of --cleanup so that it can also take
advantage of this change.
Finally, add testing to ensure that messages are properly cleaned up.
Note that some newlines that were added to the commit message were
removed so that if a file were read via -F, it would be copied
faithfully.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ref-filter.c, when processing the atom %(push:track), the
ahead/behind values are computed using `stat_tracking_info` which refers
to the upstream branch.
Fix that by introducing a new flag `for_push` in `stat_tracking_info`
in remote.c, which does the same thing but for the push branch.
Update the few callers of `stat_tracking_info` to handle this flag. This
ensure that whenever we use this function in the future, we are careful
to specify is this should apply to the upstream or the push branch.
This bug was not detected in t/t6300-for-each-ref.sh because in the test
for push:track, both the upstream and the push branches were behind by 1
from the local branch. Change the test so that the upstream branch is
behind by 1 while the push branch is ahead by 1. This allows us to test
that %(push:track) refers to the correct branch.
This changes the expected value of some following tests (by introducing
new references), so update them too.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user commits a conflict resolution using `git commit` in the
middle of a sequence of cherry-picks/reverts then `git status` missed
the fact that a cherry-pick/revert is still in progress.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add trace2_region_enter() and trace2_region_leave() calls around the
various phases of a status scan. This gives elapsed time for each
phase in the GIT_TR2_PERF and GIT_TR2_EVENT trace target.
Also, these Trace2 calls now use s->repo rather than the_repository.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hold_locked_index() assumes the index path at $GIT_DIR/index. This is
not good for places that take an arbitrary index_state instead of
the_index, which is basically everywhere except builtin/.
Replace it with repo_hold_locked_index(). hold_locked_index() remains
as a wrapper around repo_hold_locked_index() to reduce changes in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since `git rebase -r` was introduced, that is possible. But our
machinery did not think that possible, and failed to say anything about
the rebase in progress when in the middle of a merge.
Let's work around that in the minimal fashion.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up in the internal machinery used by "git status" and
"git commit --dry-run".
* ss/wt-status-committable:
roll wt_status_state into wt_status and populate in the collect phase
wt-status.c: set the committable flag in the collect phase
t7501: add test of "commit --dry-run --short"
wt-status: rename commitable to committable
wt-status.c: move has_unmerged earlier in the file
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
Status variables were initialized in the collect phase and some
variables were later freed in the print functions.
A "struct wt_status" used to be sufficient for the output phase to
work. It was designed to be filled in the collect phase and consumed
in the output phase, but over time some fields were added and output
phase started filling the fields.
A "struct wt_status_state" that was used in other codepaths turned out
to be useful in the "git status" output. This is not tied to "struct
wt_status", so filling in the collect phase was not consistently
followed.
Move the status state structure variables into the status state
structure and populate them in the collect functions.
Create a new function to free the buffers that were being freed in the
print function. Call this new function in commit.c where both the
collect and print functions were being called.
Based on a patch suggestion by Junio C Hamano. [1]
[1] https://public-inbox.org/git/xmqqr2i5ueg4.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>