These are updates to the test vector that shows the "incompatibility" of
the new output code. The changes are actually the good ones, so instead
of keeping the older output we adjust the test to the new code.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes various problems in the new diff options code.
- Fix --cc/-c --patch; it showed two-tree diff used internally.
- Use "---\n" only where it matters -- that is, use it
immediately after the commit log text when we show a
commit log and something else before the patch text.
- Do not output spurious extra "\n"; have an extra newline
after the commit log text always when we have diff output and
we are not doing oneline.
- When running a pickaxe you need to go recursive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
setup_revisions() calls diff_setup_done() before we can set default
value for output_format. Don't convert DIFF_FORMAT_NO_OUTPUT to 0 in
diff_setup_done(), it is useless and makes diff-tree believe no diff
format parameters were given and thus lets it reset output_format to
DIFF_FORMAT_RAW.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some implementations of "expr" (e.g. FreeBSD's) fail, if an
argument starts with a dash.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some "wc" insist on putting a TAB in front of the number.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split cmd_log_wc() to cmd_log_init() and cmd_log_walk() and set default
diff output format for whatchanged to DIFF_FORMAT_RAW.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add msg_sep variable to struct diff_options. msg_sep is printed after
commit message. Default is "\n", format-patch sets it to "---\n".
This also removes the second argument from show_log() because all
callers derived it from the first argument:
show_log(rev, rev->loginfo, ...
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff_setup() used to initialize output_format to DIFF_FORMAT_RAW. Now
the default is 0 (no output) so don't compare against DIFF_FORMAT_RAW to
see if any diff format command line flags were given.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Initialize output_format to 0 instead of DIFF_FORMAT_RAW so that we can see
later if any command line options changed it. Default value is set only if
output format was not specified.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
DIFF_FORMAT_* are now bit-flags instead of enumerated values.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this flag, format-patch will try very hard not to output patches which
are already in the upstream branch.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Call it like this:
unsigned char id[20];
if (diff_flush_patch_id(diff_options, id))
printf("And the patch id is: %s\n", sha1_to_hex(id));
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ew/rebase:
rebase: allow --skip to work with --merge
rebase: cleanup rebasing with --merge
rebase: allow --merge option to handle patches merged upstream
pkt-line.h uses GCC's __attribute__ extension but does not include
git-compat-util.h. So it will not compile with a compiler that does
not support this extension.
Signed-off-by: Junio C Hamano <junkio@cox.net>
After a clone, packfiles are read-only by default and "mv" to
replace the pack with a new one goes interactive, asking if the
user wants to replace it. If one is successfully moved and the
other is not, the pack and its idx would become out-of-sync and
corrupts the repository.
Recovering is straightforward -- it is just the matter of
finding the remaining .tmp-pack-* and make sure they are both
moved -- but we should be extra careful not to do something so
alarming to the users.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets you use something like this in your $GIT_DIR/config
file.
[diff]
color = auto
[diff.color]
new = blue
old = yellow
frag = reverse
When diff.color is set to "auto", colored diff is enabled when
the standard output is the terminal. Other choices are "always",
and "never". Usual boolean true/false can also be used.
The colormap entries can specify colors for the following slots:
plain - lines that appear in both old and new file (context)
meta - diff --git header and extended git diff headers
frag - @@ -n,m +l,k @@ lines (hunk header)
old - lines deleted from old file
new - lines added to new file
The following color names can be used:
normal, bold, dim, l, blink, reverse, reset,
black, red, green, yellow, blue, magenta, cyan,
white
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that we control the merge base selection, we won't be forced
into rolling things in that we wanted to skip beforehand.
Also, add a test to ensure this all works as intended.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We no longer have to recommit each patch to remove the parent
information we're rebasing since we're using the low-level merge
strategies directly instead of git-merge.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Enhance t3401-rebase-partial to test with --merge as well as
the standard am -3 strategy.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The current behaviour strips out lines starting with a # even when fed
through stdin or -m. This is particularly bad when importing history from
another SCM (tailor 0.9.23 uses git-commit). In the best cases all lines
are stripped and the commit fails with a confusing "empty log message"
error, but in many cases the commit is done, with loss of information.
Note that it is quite peculiar to just have "#" handled as a leading
comment char here. One commonly meet CVS: or CG: or STG: as prefixes, and
using GIT: would be more robust as well as consistent with other commit
tools. However, that would break any tool relying on the # (if any).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not make much sense to build git whose behaviour is
different depending on the brokenness of diff implementation of
the platform because the brokenness of the patch that is applied
with the tool depends on brokenness of the diff the person who
generates the patch uses. So we do not use NO_ACCURATE_DIFF
anymore, but help people to apply patches that do not record
incomplete lines correctly with a runtime flag.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Two bugs had slipped in the "keep one index per branch during import"
patch. Both incremental imports and new branches would see an
empty tree for their initial commit. Now we cover all the relevant
cases, checking whether we actually need to setup the index before
preparing the actual commit, and doing it.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a bool variable appears without any value, it means true.
However, replacing the NULL value with an empty string, an earlier
commit f067a13745 broke show-config.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-repack was passing the -q along to pack-objects but ignoring it
itself. Correct the oversight.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is about 15% faster that the current sha1ppc.S on a G4, and
5% faster on a G5 when hashing 10 million bytes, unaligned.
(The G5 ratio seems to get better as the sizes fall.)
It's also somewhat smaller, due to using load-multiple instructions.
No copyright is claimed on the changes to Paul Mackerras' work below.
test to hash a large buffer in one go is more important than
hashing large amount of data in small fixed chunks.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some people tend to do many little commits on a topic branch,
recording all the trials and errors, and when the topic is
reasonably cooked well, would want to record the net effect of
the series as one commit on top of the mainline, removing the
cruft from the history. The topic is then abandoned or forked
off again from that point at the mainline.
The barebone porcelainish that comes with core git tools does
not officially support such operation, but you can fake it by
using "git pull --no-merge" when such a topic branch is not a
strict superset of the mainline, like this:
git checkout mainline
git pull --no-commit . that-topic-branch
: fix conflicts if any
rm -f .git/MERGE_HEAD
git commit -a -m 'consolidated commit log message'
git branch -f that-topic-branch ;# now fully merged
This however does not work when the topic branch is a fast
forward of the mainline, because normal "git pull" will never
create a merge commit in such a case, and there is nothing
special --no-commit could do to begin with.
This patch introduces a new option, --squash, to support such a
workflow officially in both fast-forward case and true merge
case. The user-level operation would be the same in both cases:
git checkout mainline
git pull --squash . that-topic-branch
: fix conflicts if any -- naturally, there would be
: no conflict if fast forward.
git commit -a -m 'consolidated commit log message'
git branch -f that-topic-branch ;# now fully merged
When the current branch is already up-to-date with respect to
the other branch, there truly is nothing to do, so the new
option does not have any effect.
This was brought up in #git IRC channel recently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* pb/error:
usage: minimum type fix.
Customizable error handlers
git-merge: Don't use -p when outputting summary
git-commit: allow -e option anywhere on command line
patch-id: take "commit" prefix as well as "diff-tree" prefix
