The revision walker machinery learned to take advantage of the
commit generation numbers stored in the commit-graph file.
* ds/reachable-topo-order:
t6012: make rev-list tests more interesting
revision.c: generation-based topo-order algorithm
commit/revisions: bookkeeping before refactoring
revision.c: begin refactoring --topo-order logic
test-reach: add rev-list tests
test-reach: add run_three_modes method
prio-queue: add 'peek' operation
Operations on promisor objects make sense in the context of only a
small subset of the commands that internally use the revisions
machinery, but the "--exclude-promisor-objects" option were taken
and led to nonsense results by commands like "log", to which it
didn't make much sense. This has been corrected.
* md/exclude-promisor-objects-fix:
exclude-promisor-objects: declare when option is allowed
Documentation/git-log.txt: do not show --exclude-promisor-objects
The current --topo-order algorithm requires walking all
reachable commits up front, topo-sorting them, all before
outputting the first value. This patch introduces a new
algorithm which uses stored generation numbers to
incrementally walk in topo-order, outputting commits as
we go. This can dramatically reduce the computation time
to write a fixed number of commits, such as when limiting
with "-n <N>" or filling the first page of a pager.
When running a command like 'git rev-list --topo-order HEAD',
Git performed the following steps:
1. Run limit_list(), which parses all reachable commits,
adds them to a linked list, and distributes UNINTERESTING
flags. If all unprocessed commits are UNINTERESTING, then
it may terminate without walking all reachable commits.
This does not occur if we do not specify UNINTERESTING
commits.
2. Run sort_in_topological_order(), which is an implementation
of Kahn's algorithm. It first iterates through the entire
set of important commits and computes the in-degree of each
(plus one, as we use 'zero' as a special value here). Then,
we walk the commits in priority order, adding them to the
priority queue if and only if their in-degree is one. As
we remove commits from this priority queue, we decrement the
in-degree of their parents.
3. While we are peeling commits for output, get_revision_1()
uses pop_commit on the full list of commits computed by
sort_in_topological_order().
In the new algorithm, these three steps correspond to three
different commit walks. We run these walks simultaneously,
and advance each only as far as necessary to satisfy the
requirements of the 'higher order' walk. We know when we can
pause each walk by using generation numbers from the commit-
graph feature.
Recall that the generation number of a commit satisfies:
* If the commit has at least one parent, then the generation
number is one more than the maximum generation number among
its parents.
* If the commit has no parent, then the generation number is one.
There are two special generation numbers:
* GENERATION_NUMBER_INFINITY: this value is 0xffffffff and
indicates that the commit is not stored in the commit-graph and
the generation number was not previously calculated.
* GENERATION_NUMBER_ZERO: this value (0) is a special indicator
to say that the commit-graph was generated by a version of Git
that does not compute generation numbers (such as v2.18.0).
Since we use generation_numbers_enabled() before using the new
algorithm, we do not need to worry about GENERATION_NUMBER_ZERO.
However, the existence of GENERATION_NUMBER_INFINITY implies the
following weaker statement than the usual we expect from
generation numbers:
If A and B are commits with generation numbers gen(A) and
gen(B) and gen(A) < gen(B), then A cannot reach B.
Thus, we will walk in each of our stages until the "maximum
unexpanded generation number" is strictly lower than the
generation number of a commit we are about to use.
The walks are as follows:
1. EXPLORE: using the explore_queue priority queue (ordered by
maximizing the generation number), parse each reachable
commit until all commits in the queue have generation
number strictly lower than needed. During this walk, update
the UNINTERESTING flags as necessary.
2. INDEGREE: using the indegree_queue priority queue (ordered
by maximizing the generation number), add one to the in-
degree of each parent for each commit that is walked. Since
we walk in order of decreasing generation number, we know
that discovering an in-degree value of 0 means the value for
that commit was not initialized, so should be initialized to
two. (Recall that in-degree value "1" is what we use to say a
commit is ready for output.) As we iterate the parents of a
commit during this walk, ensure the EXPLORE walk has walked
beyond their generation numbers.
3. TOPO: using the topo_queue priority queue (ordered based on
the sort_order given, which could be commit-date, author-
date, or typical topo-order which treats the queue as a LIFO
stack), remove a commit from the queue and decrement the
in-degree of each parent. If a parent has an in-degree of
one, then we add it to the topo_queue. Before we decrement
the in-degree, however, ensure the INDEGREE walk has walked
beyond that generation number.
The implementations of these walks are in the following methods:
* explore_walk_step and explore_to_depth
* indegree_walk_step and compute_indegrees_to_depth
* next_topo_commit and expand_topo_walk
These methods have some patterns that may seem strange at first,
but they are probably carry-overs from their equivalents in
limit_list and sort_in_topological_order.
One thing that is missing from this implementation is a proper
way to stop walking when the entire queue is UNINTERESTING, so
this implementation is not enabled by comparisions, such as in
'git rev-list --topo-order A..B'. This can be updated in the
future.
In my local testing, I used the following Git commands on the
Linux repository in three modes: HEAD~1 with no commit-graph,
HEAD~1 with a commit-graph, and HEAD with a commit-graph. This
allows comparing the benefits we get from parsing commits from
the commit-graph and then again the benefits we get by
restricting the set of commits we walk.
Test: git rev-list --topo-order -100 HEAD
HEAD~1, no commit-graph: 6.80 s
HEAD~1, w/ commit-graph: 0.77 s
HEAD, w/ commit-graph: 0.02 s
Test: git rev-list --topo-order -100 HEAD -- tools
HEAD~1, no commit-graph: 9.63 s
HEAD~1, w/ commit-graph: 6.06 s
HEAD, w/ commit-graph: 0.06 s
This speedup is due to a few things. First, the new generation-
number-enabled algorithm walks commits on order of the number of
results output (subject to some branching structure expectations).
Since we limit to 100 results, we are running a query similar to
filling a single page of results. Second, when specifying a path,
we must parse the root tree object for each commit we walk. The
previous benefits from the commit-graph are entirely from reading
the commit-graph instead of parsing commits. Since we need to
parse trees for the same number of commits as before, we slow
down significantly from the non-path-based query.
For the test above, I specifically selected a path that is changed
frequently, including by merge commits. A less-frequently-changed
path (such as 'README') has similar end-to-end time since we need
to walk the same number of commits (before determining we do not
have 100 hits). However, get the benefit that the output is
presented to the user as it is discovered, much the same as a
normal 'git log' command (no '--topo-order'). This is an improved
user experience, even if the command has the same runtime.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git rev-list --topo-order' and its kin, the topo_order
setting in struct rev_info implies the limited setting. This means
that the following things happen during prepare_revision_walk():
* revs->limited implies we run limit_list() to walk the entire
reachable set. There are some short-cuts here, such as if we
perform a range query like 'git rev-list COMPARE..HEAD' and we
can stop limit_list() when all queued commits are uninteresting.
* revs->topo_order implies we run sort_in_topological_order(). See
the implementation of that method in commit.c. It implies that
the full set of commits to order is in the given commit_list.
These two methods imply that a 'git rev-list --topo-order HEAD'
command must walk the entire reachable set of commits _twice_ before
returning a single result.
If we have a commit-graph file with generation numbers computed, then
there is a better way. This patch introduces some necessary logic
redirection when we are in this situation.
In v2.18.0, the commit-graph file contains zero-valued bytes in the
positions where the generation number is stored in v2.19.0 and later.
Thus, we use generation_numbers_enabled() to check if the commit-graph
is available and has non-zero generation numbers.
When setting revs->limited only because revs->topo_order is true,
only do so if generation numbers are not available. There is no
reason to use the new logic as it will behave similarly when all
generation numbers are INFINITY or ZERO.
In prepare_revision_walk(), if we have revs->topo_order but not
revs->limited, then we trigger the new logic. It breaks the logic
into three pieces, to fit with the existing framework:
1. init_topo_walk() fills a new struct topo_walk_info in the rev_info
struct. We use the presence of this struct as a signal to use the
new methods during our walk. In this patch, this method simply
calls limit_list() and sort_in_topological_order(). In the future,
this method will set up a new data structure to perform that logic
in-line.
2. next_topo_commit() provides get_revision_1() with the next topo-
ordered commit in the list. Currently, this simply pops the commit
from revs->commits.
3. expand_topo_walk() provides get_revision_1() with a way to signal
walking beyond the latest commit. Currently, this calls
add_parents_to_list() exactly like the old logic.
While this commit presents method redirection for performing the
exact same logic as before, it allows the next commit to focus only
on the new logic.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "rev-list --filter" feature learned to exclude all trees via
"tree:0" filter.
* md/filter-trees:
list-objects: support for skipping tree traversal
filter-trees: code clean-up of tests
list-objects-filter: implement filter tree:0
list-objects-filter-options: do not over-strbuf_init
list-objects-filter: use BUG rather than die
revision: mark non-user-given objects instead
rev-list: handle missing tree objects properly
list-objects: always parse trees gently
list-objects: refactor to process_tree_contents
list-objects: store common func args in struct
The --exclude-promisor-objects option causes some funny behavior in at
least two commands: log and blame. It causes a BUG crash:
$ git log --exclude-promisor-objects
BUG: revision.c:2143: exclude_promisor_objects can only be used
when fetch_if_missing is 0
Aborted
[134]
Fix this such that the option is treated like any other unknown option.
The commands that must support it are limited, so declare in those
commands that the flag is supported. In particular:
pack-objects
prune
rev-list
The commands were found by searching for logic which parses
--exclude-promisor-objects outside of revision.c. Extra logic outside of
revision.c is needed because fetch_if_missing must be turned on before
revision.c sees the option or it will BUG-crash. The above list is
supported by the fact that no other command is introspectively invoked
by another command passing --exclude-promisor-object.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
Currently, list-objects.c incorrectly treats all root trees of commits
as USER_GIVEN. Also, it would be easier to mark objects that are
non-user-given instead of user-given, since the places in the code
where we access an object through a reference are more obvious than
the places where we access an object that was given by the user.
Resolve these two problems by introducing a flag NOT_USER_GIVEN that
marks blobs and trees that are non-user-given, replacing USER_GIVEN.
(Only blobs and trees are marked because this mark is only used when
filtering objects, and filtering of other types of objects is not
supported yet.)
This fixes a bug in that git rev-list behaved differently from git
pack-objects. pack-objects would *not* filter objects given explicitly
on the command line and rev-list would filter. This was because the two
commands used a different function to add objects to the rev_info
struct. This seems to have been an oversight, and pack-objects has the
correct behavior, so I added a test to make sure that rev-list now
behaves properly.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we assumed only blob objects could be missing. This patch
makes rev-list handle missing trees like missing blobs. The --missing=*
and --exclude-promisor-objects flags now work for trees as they already
do for blobs. This is demonstrated in t6112.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned a new "--range-diff" option to explain
the difference between this version and the previous attempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-rangediff:
format-patch: allow --range-diff to apply to a lone-patch
format-patch: add --creation-factor tweak for --range-diff
format-patch: teach --range-diff to respect -v/--reroll-count
format-patch: extend --range-diff to accept revision range
format-patch: add --range-diff option to embed diff in cover letter
range-diff: relieve callers of low-level configuration burden
range-diff: publish default creation factor
range-diff: respect diff_option.file rather than assuming 'stdout'
"git format-patch" learned a new "--interdiff" option to explain
the difference between this version and the previous atttempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
"git rev-list --stdin </dev/null" used to be an error; it now shows
no output without an error. "git rev-list --stdin --default HEAD"
still falls back to the given default when nothing is given on the
standard input.
* jk/rev-list-stdin-noop-is-ok:
rev-list: make empty --stdin not an error
When we originally did the series that contains 7ba826290a
(revision: add rev_input_given flag, 2017-08-02) the intent
was that "git rev-list --stdin </dev/null" would similarly
become a successful noop. However, an attempt at the time to
do that did not work[1]. The problem is that rev_input_given
serves two roles:
- it tells rev-list.c that it should not error out
- it tells revision.c that it should not have the "default"
ref kick (e.g., "HEAD" in "git log")
We want to trigger the former, but not the latter. This is
technically possible with a single flag, if we set the flag
only after revision.c's revs->def check. But this introduces
a rather subtle ordering dependency.
Instead, let's keep two flags: one to denote when we got
actual input (which triggers both roles) and one for when we
read stdin (which triggers only the first).
This does mean a caller interested in the first role has to
check both flags, but there's only one such caller. And any
future callers might want to make the distinction anyway
(e.g., if they care less about erroring out, and more about
whether revision.c soaked up our stdin).
In fact, we already keep such a flag internally in
revision.c for this purpose, so this is really just exposing
that to the caller (and the old function-local flag can go
away in favor of our new one).
[1] https://public-inbox.org/git/20170802223416.gwiezhbuxbdmbjzx@sigill.intra.peff.net/
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code hygiene improvement for the header files.
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --range-diff option announces the embedded range-diff generically
as "Range-diff:", however, we can do better when --reroll-count is
specified by emitting "Range-diff against v{n}:" instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch series, it can be helpful
(to reviewers) to include a summary of changes since the previous
attempt in the form of a range-diff, however, doing so involves manually
copy/pasting the diff into the cover letter.
Add a --range-diff option to automate this process. The argument to
--range-diff specifies the tip of the previous attempt against which to
generate the range-diff. For example:
git format-patch --cover-letter --range-diff=v1 -3 v2
(At this stage, the previous attempt and the patch series being
formatted must share a common base, however, a subsequent enhancement
will make it possible to specify an explicit revision range for the
previous attempt.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
Partial clone support of "git clone" has been updated to correctly
validate the objects it receives from the other side. The server
side has been corrected to send objects that are directly
requested, even if they may match the filtering criteria (e.g. when
doing a "lazy blob" partial clone).
* jt/partial-clone-fsck-connectivity:
clone: check connectivity even if clone is partial
upload-pack: send refs' objects despite "filter"
The --interdiff option introduces the embedded interdiff generically as
"Interdiff:", however, we can do better when --reroll-count is specified
by emitting "Interdiff against v{n}:" instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch series, it can be helpful
(to reviewers) to include a summary of changes since the previous
attempt in the form of an interdiff, however, doing so involves manually
copy/pasting the diff into the cover letter.
Add an --interdiff option to automate this process. The argument to
--interdiff specifies the tip of the previous attempt against which to
generate the interdiff. For example:
git format-patch --cover-letter --interdiff=v1 -3 v2
The previous attempt and the patch series being formatted must share a
common base.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A filter line in a request to upload-pack filters out objects regardless
of whether they are directly referenced by a "want" line or not. This
means that cloning with "--filter=blob:none" (or another filter that
excludes blobs) from a repository with at least one ref pointing to a
blob (for example, the Git repository itself) results in output like the
following:
error: missing object referenced by 'refs/tags/junio-gpg-pub'
and if that particular blob is not referenced by a fetched tree, the
resulting clone fails fsck because there is no object from the remote to
vouch that the missing object is a promisor object.
Update both the protocol and the upload-pack implementation to include
all explicitly specified "want" objects in the packfile regardless of
the filter specification.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of relying on commit->util to store the source string, let the
user provide a commit-slab to store the source strings in.
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was an undocumented debugging aid that does not seem to
have come in handy in the past decade, judging from its lack
of mentions on the mailing list.
Let's drop it in the name of simplicity. This is morally a
revert of 3131b71301 (Add "--show-all" revision walker flag
for debugging, 2008-02-09), but note that I did leave in the
mapping of UNINTERESTING to "^" in get_revision_mark(). I
don't think this would be possible to trigger with the
current code, but it's the only sensible marker.
We'll skip the usual deprecation period because this was
explicitly a debugging aid that was never documented.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
In preparation for implementing narrow/partial clone, the machinery
for checking object connectivity used by gc and fsck has been
taught that a missing object is OK when it is referenced by a
packfile specially marked as coming from trusted repository that
promises to make them available on-demand and lazily.
* jh/fsck-promisors:
gc: do not repack promisor packfiles
rev-list: support termination at promisor objects
sha1_file: support lazily fetching missing objects
introduce fetch-object: fetch one promisor object
index-pack: refactor writing of .keep files
fsck: support promisor objects as CLI argument
fsck: support referenced promisor objects
fsck: support refs pointing to promisor objects
fsck: introduce partialclone extension
extension.partialclone: introduce partial clone extension
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
"git describe" was taught to dig trees deeper to find a
<commit-ish>:<path> that refers to a given blob object.
* sb/describe-blob:
builtin/describe.c: describe a blob
builtin/describe.c: factor out describe_commit
builtin/describe.c: print debug statements earlier
builtin/describe.c: rename `oid` to avoid variable shadowing
revision.h: introduce blob/tree walking in order of the commits
list-objects.c: factor out traverse_trees_and_blobs
t6120: fix typo in test name
Create header for pretty.c to make formatting interface more structured.
This is a middle point, this file would be merged further with other
files which contain formatting stuff.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to support termination of an object traversal at any
object from a promisor remote (whether one that the local repo also has,
or one that the local repo knows about because it has another promisor
object that references it).
This will be used subsequently in gc and in the connectivity check used
by fetch.
For efficiency, if an object is referenced by a promisor object, and is
in the local repo only as a non-promisor object, object traversal will
not stop there. This is to avoid building the list of promisor object
references.
(In list-objects.c, the case where obj is NULL in process_blob() and
process_tree() do not need to be changed because those happen only when
there is a conflict between the expected type and the existing object.
If the object doesn't exist, an object will be synthesized, which is
fine.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality to list tree objects in the order they were seen
while traversing the commits will be used in one of the next commits,
where we teach `git describe` to describe not only commits, but blobs, too.
The change in list-objects.c is rather minimal as we'll be re-using
the infrastructure put in place of the revision walking machinery. For
example one could expect that add_pending_tree is not called, but rather
commit->tree is directly passed to the tree traversal function. This
however requires a lot more code than just emptying the queue containing
trees after each commit.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory leaks in various codepaths have been plugged.
* ma/leakplugs:
pack-bitmap[-write]: use `object_array_clear()`, don't leak
object_array: add and use `object_array_pop()`
object_array: use `object_array_clear()`, not `free()`
leak_pending: use `object_array_clear()`, not `free()`
commit: fix memory leak in `reduce_heads()`
builtin/commit: fix memory leak in `prepare_index()`
Setting `leak_pending = 1` tells `prepare_revision_walk()` not to
release the `pending` array, and makes that the caller's responsibility.
See 4a43d374f (revision: add leak_pending flag, 2011-10-01) and
353f5657a (bisect: use leak_pending flag, 2011-10-01).
Commit 1da1e07c8 (clean up name allocation in prepare_revision_walk,
2014-10-15) fixed a memory leak in `prepare_revision_walk()` by
switching from `free()` to `object_array_clear()`. However, where we use
the `leak_pending`-mechanism, we're still only calling `free()`.
Use `object_array_clear()` instead. Copy some helpful comments from
353f5657a to the other callers that we update to clarify the memory
responsibilities, and to highlight that the commits are not affected
when we clear the array -- it is indeed correct to both tidy up the
commit flags and clear the object array.
Document `leak_pending` in revision.h to help future users get this
right.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision walker can walk through per-worktree refs like HEAD or
SHA-1 references in the index. These currently are from the current
worktree only. This new flag is added to change rev-list behavior in
this regard:
When single_worktree is set, only current worktree is considered. When
it is not set (which is the default), all worktrees are considered.
The default is chosen so because the two big components that rev-list
works with are object database (entirely shared between worktrees) and
refs (mostly shared). It makes sense that default behavior goes per-repo
too instead of per-worktree.
The flag will eventually be exposed as a rev-list argument with
documents. For now it stays internal until the new behavior is fully
implemented.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally a caller that invokes setup_revisions() has to
check rev.pending to see if anything was actually queued for
the traversal. But they can't tell the difference between
two cases:
1. The user gave us no tip from which to start a
traversal.
2. The user tried to give us tips via --glob, --all, etc,
but their patterns ended up being empty.
Let's set a flag in the rev_info struct that callers can use
to tell the difference. We can set this from the
init_all_refs_cb() function. That's a little funny because
it's not exactly about initializing the "cb" struct itself.
But that function is the common setup place for doing
pattern traversals that is used by --glob, --all, etc.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* sg/revision-parser-skip-prefix:
revision.c: use skip_prefix() in handle_revision_pseudo_opt()
revision.c: use skip_prefix() in handle_revision_opt()
revision.c: stricter parsing of '--early-output'
revision.c: stricter parsing of '--no-{min,max}-parents'
revision.h: turn rev_info.early_output back into an unsigned int
rev_info.early_output started out as an unsigned int in cdcefbc97 (Add
"--early-output" log flag for interactive GUI use, 2007-11-03), but
later it was turned into a single bit in a bit field in cc243c3ce
(show: --ignore-missing, 2011-05-18) without explanation, though the
code using it still expects it to be a regular integer type and uses
it as a counter. Consequently, any even number given via
'--early-output=<N>', or indeed a plain '--early-output' defaulting to
100 effectively disabled the feature.
Turn rev_info.early_output back into its origin unsigned int data
type, making '--early-output' work again.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
Rename this function and convert it to take a pointer to struct
object_id.
This is a prerequisite for converting get_reference, which is needed to
convert parse_object.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of path_name() was removed by 2824e1841 (list-objects:
pass full pathname to callbacks); remove its declaration as well.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git log" shows the log message indented by 4-spaces, the
remainder of a line after a HT does not align in the way the author
originally intended. The command now expands tabs by default in
such a case, and allows the users to override it with a new option,
'--no-expand-tabs'.
* lt/pretty-expand-tabs:
pretty: test --expand-tabs
pretty: allow tweaking tabwidth in --expand-tabs
pretty: enable --expand-tabs by default for selected pretty formats
pretty: expand tabs in indented logs to make things line up properly
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
