Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have 168 man pages that mention they are part of Git, you
can check yourself easily via:
$ git grep "Part of the linkgit:git\[1\] suite" |wc -l
168
However some have a trailing period, i.e.
$ git grep "Part of the linkgit:git\[1\] suite." |wc -l
8
Unify the bottom line in all man pages to not end with a period.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the introduction of the $GIT_COMMON_DIR variable, the
repository layout manual was changed to reflect the location for
many files in case the variable is set. While adding the new
locations, one typo snuck in regarding the location of the
'info/' folder, which is falsely claimed to reside at
"$GIT_COMMON_DIR/index".
Fix the typo to point to "$GIT_COMMON_DIR/info/" instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[es: reword .git/worktrees and .git/worktrees/<id>/locked descriptions]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes linked working trees were called "linked working
directories" or "linked worktrees". Always refer to them as "linked
working trees" for consistency.
[es: fix additional occurrences]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each working directory of main repository has its own working directory
of submodule, and in most cases they should be checked out to different
revisions. So they should be separated.
It looks logical to make submodule instances in different working
directories to reuse the submodule directory in the common dir of
the main repository, and probably this is how "checkout --to" should
initialize them called on the main repository, but they also should work
fine being completely separated clones.
Testfile t7410-submodule-checkout-to.sh demostrates the behavior.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(alias R=$GIT_COMMON_DIR/worktrees/<id>)
- linked checkouts are supposed to keep its location in $R/gitdir up
to date. The use case is auto fixup after a manual checkout move.
- linked checkouts are supposed to update mtime of $R/gitdir. If
$R/gitdir's mtime is older than a limit, and it points to nowhere,
worktrees/<id> is to be pruned.
- If $R/locked exists, worktrees/<id> is not supposed to be pruned. If
$R/locked exists and $R/gitdir's mtime is older than a really long
limit, warn about old unused repo.
- "git checkout --to" is supposed to make a hard link named $R/link
pointing to the .git file on supported file systems to help detect
the user manually deleting the checkout. If $R/link exists and its
link count is greated than 1, the repo is kept.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout --to" sets up a new working directory with a .git file
pointing to $GIT_DIR/worktrees/<id>. It then executes "git checkout"
again on the new worktree with the same arguments except "--to" is
taken out. The second checkout execution, which is not contaminated
with any info from the current repository, will actually check out and
everything that normal "git checkout" does.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the file "$GIT_DIR/commondir" exists, it contains the value of
$GIT_COMMON_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable is intended to support multiple working directories
attached to a repository. Such a repository may have a main working
directory, created by either "git init" or "git clone" and one or more
linked working directories. These working directories and the main
repository share the same repository directory.
In linked working directories, $GIT_COMMON_DIR must be defined to point
to the real repository directory and $GIT_DIR points to an unused
subdirectory inside $GIT_COMMON_DIR. File locations inside the
repository are reorganized from the linked worktree view point:
- worktree-specific such as HEAD, logs/HEAD, index, other top-level
refs and unrecognized files are from $GIT_DIR.
- the rest like objects, refs, info, hooks, packed-refs, shallow...
are from $GIT_COMMON_DIR (except info/sparse-checkout, but that's
a separate patch)
Scripts are supposed to retrieve paths in $GIT_DIR with "git rev-parse
--git-path", which will take care of "$GIT_DIR vs $GIT_COMMON_DIR"
business.
The redirection is done by git_path(), git_pathdup() and
strbuf_git_path(). The selected list of paths goes to $GIT_COMMON_DIR,
not the other way around in case a developer adds a new
worktree-specific file and it's accidentally promoted to be shared
across repositories (this includes unknown files added by third party
commands)
The list of known files that belong to $GIT_DIR are:
ADD_EDIT.patch BISECT_ANCESTORS_OK BISECT_EXPECTED_REV BISECT_LOG
BISECT_NAMES CHERRY_PICK_HEAD COMMIT_MSG FETCH_HEAD HEAD MERGE_HEAD
MERGE_MODE MERGE_RR NOTES_EDITMSG NOTES_MERGE_WORKTREE ORIG_HEAD
REVERT_HEAD SQUASH_MSG TAG_EDITMSG fast_import_crash_* logs/HEAD
next-index-* rebase-apply rebase-merge rsync-refs-* sequencer/*
shallow_*
Path mapping is NOT done for git_path_submodule(). Multi-checkouts are
not supported as submodules.
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This split-index mode is designed to keep write cost proportional to
the number of changes the user has made, not the size of the work
tree. (Read cost is another matter, to be dealt separately.)
This mode stores index info in a pair of $GIT_DIR/index and
$GIT_DIR/sharedindex.<SHA-1>. sharedindex is large and unchanged over
time while "index" is smaller and updated often. Format details are in
index-format.txt, although not everything is implemented in this
patch.
Shared indexes are not automatically removed, because it's unclear if
the shared index is needed by any (even temporary) indexes by just
looking at it. After a while you'll collect stale shared indexes. The
good news is one shared index is useable for long, until
$GIT_DIR/index becomes too big and sluggish that the new shared index
must be created.
The safest way to clean shared indexes is to turn off split index
mode, so shared files are all garbage, delete them all, then turn on
split index mode again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A note in the beginning of this document describes the behavior already.
This patch just adds where to find the repositories.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the initial "sparse" selection of the paths more sticky across
"git checkout".
* nd/checkout-keep-sparse:
checkout: add --ignore-skip-worktree-bits in sparse checkout mode
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -- <paths>" is usually used to restore all modified
files in <paths>. In sparse checkout mode, this command is overloaded
with another meaning: to add back all files in <paths> that are
excluded by sparse patterns.
As the former makes more sense for day-to-day use. Switch it to the
default and the latter enabled with --ignore-skip-worktree-bits.
While at there, add info/sparse-checkout to gitrepository-layout.txt
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the introductory part and concisely explain how gitfile is
handled, what it is used for and for what effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct a few grammar issues in gitrepository-layout.txt and also
rewords a few sections for clarity.
Remove references to using http-fetch without -a to create a broken
repository.
Mark a few areas of the repository structure as legacy.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Since f98f8cb (Ship sample hooks with .sample suffix, 2008-06-24) hooks
are not enabled by making them executable anymore, but by removing the
'.sample' suffix from the filename.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the dashed forms of git commands not in $(bindir), we have
to change many instances of "git-command" to "git command". Also,
for consistency it is at times appropriate to make the opposite
change. In some cases, the change is not so simple as changing one
character.
This patch gets rid of some of those cases by rewrapping lines.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the conversion of HTML documentation to man pages
tutorial.html -> gittutorial (7)
tutorial-2.html -> gittutorial-2 (7)
cvs-migration.html -> gitcvs-migration (7)
diffcore.html -> gitdiffcore (7)
repository-layout.html -> gitrepository-layout (5)
hooks.html -> githooks (5)
glossary.html -> gitglossary (7)
core-tutorial.html -> gitcore-tutorial (7)
and the automatic update of references to these pages,
a little debris was left behind. We clear it away.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man format:
diffcore.txt -> gitdiffcore.txt (man section 7)
repository-layout.txt -> gitrepository-layout.txt (man section 5)
Other documents that reference the above ones are changed accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
