Sun Studio 12 Update 1 thinks that *t could be uninitialized,
ostensibly because it doesn't take rewrite_cmd into account in its
static analysis.
builtin/notes.c: In function `notes_copy_from_stdin':
builtin/notes.c:419: warning: 't' might be used uninitialized in this function
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if there is a caller in top frame of gitweb, and either 'return'
if gitweb code is wrapped in subroutine, or 'exit' if it is not.
This should avoid
gitweb.cgi: Subroutine git_SOMETHING redefined at gitweb.cgi line NNN
warnings in error_log when running gitweb with mod_perl (using
ModPerl::Registry handler)
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of the tests in t3508 begins by navigating to a sane state:
git checkout master &&
git reset --hard $commit
If a previous test left unmerged files around, they are untouched and
the checkout fails, causing later tests to fail, too. This is not a
problem in practice because no test except the final one produces
unmerged files.
But as a futureproofing measure, it is still best to avoid the problem
with 'checkout -f'. In particular, this is needed for new tests to be
added to the end of the script.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also makes it trigger anywhere in the commit message, rather than
just at the beginning. Which tends to be a lot more useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
svn:// servers are more picky regarding redundant slashes
than file:// and http(s)://-backed respositories. Since
the last commit, we avoid putting unnecessary slashes in
$GIT_CONFIG, but this doesn't help users who are already
set up that way.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The following command
git svn clone \
-r9500:10006 \
svn://svn.debian.org/svn/pkg-games/packages \
--trunk=/trunk/freedoom \
--branches=/branches/freedoom \
--tags=/tags/freedoom \
freedoom.git.2009091
produces strange results:
With v1.6.3.3 (and perhaps earlier versions), this would fetch up to
and including r9978 (the last revision of the no_iwad_alternatives
branch before it was deleted), check it out, and prematurely declare
success, leaving out some commits to the trunk (r9984, r9985, r10006)
from after the branch was merged.
With v1.6.5-rc0~74 (svn: allow branches outside of refs/remotes,
2009-08-11) and later, this fetches up to and including r9978 and then
attempts a post-fetch checkout and fails.
r9978 = 25f0920175c395f0f22f54ae7a2318147f745274
(refs/remotes/no_iwad_alternatives)
fatal: refs/remotes/trunk: not a valid SHA1
update-ref refs/heads/master refs/remotes/trunk: command returned error: 128
Checking .git/config reveals
fetch = packages//trunk/freedoom:refs/remotes/trunk
And with both 1.6.3.3 and 1.7.1, using --trunk=trunk/freedom without
the leading slash (/) works fine.
Moral: git-svn needs to scrub an initial / from $_trunk and related
arguments it receives. Make it so.
Reported-by: Jon Dowland <jmtd@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Instead of talking about hardcoded UTF-8, describe i18n.commitencoding
and the --encoding option, and state that they default to UTF-8.
Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following python 2.5 features were worked around:
* the sha module is used as a fallback when the hashlib module is
not available
* the 'any' built-in method was replaced with a 'for' loop
* a conditional expression was replaced with an 'if' statement
* the subprocess.check_call method was replaced by a call to
subprocess.Popen followed by a call to subprocess.wait with a
check of its return status
These changes allow the python infrastructure to be used with python 2.4
which is distributed with RedHat's RHEL 5, for example.
t5800 was updated to check for python >= 2.4 to reflect these changes.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The PYTHON_PATH environment variable is not set when running test scripts
manually i.e. when not using 'make test'. Scripts which attempt to use
this variable will fail. So add it to the list of variables written to
the GIT-BUILD-OPTIONS file so that the test suite will import it when
running the test scripts.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/cvsserver:
git-cvsserver: test for pserver authentication support
git-cvsserver: document making a password without htpasswd
git-cvsserver: Improved error handling for pserver
git-cvsserver: indent & clean up authdb code
git-cvsserver: use a password file cvsserver pserver
git-cvsserver: authentication support for pserver
* rs/grep-binary:
grep: support NUL chars in search strings for -F
grep: use REG_STARTEND for all matching if available
grep: continue case insensitive fixed string search after NUL chars
grep: use memmem() for fixed string search
grep: --name-only over binary
grep: --count over binary
grep: grep: refactor handling of binary mode options
grep: add test script for binary file handling
* js/try-to-free-stackable:
Do not call release_pack_memory in malloc wrappers when GIT_TRACE is used
Have set_try_to_free_routine return the previous routine
* wp/pretty-enhancement:
pretty: initialize new cmt_fmt_map to 0
pretty: add aliases for pretty formats
pretty: add infrastructure for commit format aliases
pretty: make it easier to add new formats
The "a" and "d" commands to ‘add --patch’ (accept/reject rest of file)
interact with "j", "g", and "/" (skip some hunks) in a perhaps
confusing way: after accepting or rejecting all _later_ hunks in the
file, they return to the earlier, skipped hunks and prompt the user
about them again.
This behavior can be very useful in practice. One can still accept or
reject _all_ undecided hunks in a file by using the "g" command to
move to hunk #1 first.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the key has to be the same in call site handle_errors_html
and in called subroutine that uses it, i.e. git_header_html.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment variable GIT_REFLOG_ACTION was used by git-commit.sh,
but when it was converted to a builtin
(f5bbc3225c, Port git commit to C,
Nov 8 2007) this was lost.
Let's use it again as it is more user friendly when reverting or
cherry-picking to see "revert" or "cherry-pick" in the reflog rather
than to just see "commit".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This attempts to fix a regression in git-commit, where non-abbreviated
SHA-1s were printed in the summary.
One possible fix would be to set ctx.abbrev to DEFAULT_ABBREV in the
`if` block, where format_commit_message() is used.
Instead, we do away with the format_commit_message() codeblock
altogether, replacing it with a re-run of log_tree_commit().
We re-run log_tree_commit() with rev.always_show_header set, to force
the invocation of show_log(). The effect of this flag can be seen from
this excerpt from log-tree.c:560, the only area that
rev.always_show_header is checked:
shown = log_tree_diff(opt, commit, &log);
if (!shown && opt->loginfo && opt->always_show_header) {
log.parent = NULL;
show_log(opt);
shown = 1;
}
We also set rev.use_terminator, so that a newline is appended at the end
of the log message. Note that callers in builtin/log.c that also set
rev.always_show_header don't have to set rev.use_terminator, but still
get a newline, because they are wrapped in a pager.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9c7304e (print the usage string on stdout instead of stderr,
2010-05-17) broke rev-parse --parseopt: when run with -h, the usage
notice on stdout ended up in the shell eval.
Wrap the usage in a cat <<\EOF ... EOF block when printing to stdout.
I do not expect any usage lines to ever start with EOF so this
shouldn't be an undue burden.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose you want to edit all files that contain a specific search term.
Of course, you can do something totally trivial such as
git grep -z -e <term> | xargs -0r vi +/<term>
but maybe you are happy that the same will be achieved by
git grep -Ovi <term>
now.
[jn: rebased and added tests]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds an option to open the matching files in the pager, and if the
pager happens to be "less" (or "vi") and there is only one grep pattern,
it also jumps to the first match right away.
The short option was chose as '-O' to avoid clashes with GNU grep's
options (as suggested by Junio).
So, 'git grep -O abc' is a short form for 'less +/abc $(grep -l abc)'
except that it works also with spaces in file names, and it does not
start the pager if there was no matching file.
[jn: rebased and added tests; with error handling fix from Junio
squashed in]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were three awfully similar code paths ending the threaded grep. It
is better to avoid duplicated code, though.
This change might very well prevent a race, where the grep patterns were
free()d before waiting that all threads finished.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify cmd_grep by splitting off the loop that finds matches in a
list of trees. So now the main part of cmd_grep looks like:
if (!use_index) {
int hit = grep_directory(&opt, paths);
if (use_threads)
hit |= wait_all();
return !hit;
}
if (!list.nr) {
if (!cached)
setup_work_tree();
int hit = grep_cache(&opt, paths, cached);
if (use_threads)
hit |= wait_all;
return !hit;
}
hit = grep_objects(&opt, path, &list);
if (use_threads)
hit |= wait_all();
return !hit;
and is ripe for further refactoring.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --count option that, instead of actually listing the commits,
merely counts them.
This is mostly geared towards script use, and to this end it acts
specially when used with --left-right: it outputs the left and right
counts separately. Previously, scripts would have to run a shell loop
or small inline script over to achieve the same. (Without
--left-right, a simple |wc -l does the job.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
859c301 (refs: split log_ref_write logic into log_ref_setup,
2010-05-21) refactors the stack allocation of the log_file array into
the new log_ref_setup() function, but passes it back to the caller.
Since the original intent seems to have been to split the work between
log_ref_setup and log_ref_write, make it the caller's responsibility
to allocate the buffer.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
da3efdb (receive-pack: detect aliased updates which can occur with
symrefs, 2010-04-19) introduced two strcat() into uninitialized
strings. The intent was clearly make a copy of the static buffer used
by find_unique_abbrev(), so use strcpy() instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Tested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've had this option since f423ef5 (tests: allow user to specify
trash directory location, 2009-08-09). Make it easier to look up :-)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ebaa79f (Make report() from usage.c public as vreportf() and use it.,
2010-03-06) changed fast-import's die_nicely() to use vreportf().
Unfortunately this is not possible: we need the message again for
write_report(), and vreportf() uses vsnprintf(), which invalidates the
va_list. As pointed out by Erik Faye-Lund, va_copy is C99 and thus
not an option.
So revert the part of ebaa79f that pertains to die_nicely().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
