The old error messages emitted for invalid input sometimes said
"<oldvalue>"/"<newvalue>" and sometimes said "old value"/"new value".
Convert them all to the former. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an invalid value is passed to "update-ref --stdin" as <oldvalue> or
<newvalue>, include the command and the name of the reference at the
beginning of the error message. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to obscure the fact that parse_first_arg() always
parses refnames. Form the new function by combining parse_first_arg()
and update_store_ref_name().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from avoiding a tiny bit of work, this makes it transparently
obvious that old_sha1 and new_sha1 are identical. It is arguably a
bit silly to have to set new_sha1 in order to verify old_sha1, but
that is a problem for another day.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read the whole input into a strbuf at once, and then parse it from
there. This might also be a tad faster, but that is not the point.
The point is to decouple the parsing code from the input source (the
old parsing code had to read new data even in the middle of commands).
Add docstrings for the parsing functions.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old signature of update_refs() required a
(const struct ref_update **) for its updates_orig argument. The
"const" is presumably there to promise that the function will not
modify the contents of the structures.
But this declaration does not permit the function to be called with a
(struct ref_update **), which is perfectly legitimate. C's type
system is not powerful enough to express what we'd like. So remove
the first "const" from the declaration.
On the other hand, the function *can* promise not to modify the
pointers within the array that is passed to it without inconveniencing
its callers. So add a "const" that has that effect, making the final
declaration
(struct ref_update * const *).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given that these constants are only being used when updating
references, it is inappropriate to give them such generic names as
"DIE_ON_ERR". So prefix their names with "UPDATE_REFS_".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old parse_arg(), when fed an argument
"refs/heads/a"master
parsed 'refs/heads/a' off of the front of the argument and considered
itself successful. It was only when parse_next_arg() tried to parse
the *next* argument that a problem was noticed. But in fact, the
definition of the input format requires arguments to be terminated by
SP or NUL, so *this* argument is already erroneous and parse_arg()
should diagnose the problem.
So teach parse_arg() to verify that C-quoted arguments are terminated
correctly. If not, emit a more specific error message.
There is no corresponding error case of a non-C-quoted argument that
is not terminated correctly, because the end of a non-quoted argument
is *by definition* a space or NUL, so there is no way to insert other
junk between the "end" of the argument and the argument terminator.
Adjust the tests to expect the new error message. Add a docstring to
the function, incorporating the comments that were formerly within the
function plus some added information.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches the "rev-parse --parseopt" mechanism used by scripted
Porcelains to parse command line options and give help text how to
supply argv-help (the placeholder string for an option parameter,
e.g. "key-id" in "--gpg-sign=<key-id>").
* ib/rev-parse-parseopt-argh:
t1502: protect runs of SPs used in the indentation
rev-parse --parseopt: option argument name hints
When it is not necessary to edit a commit log message (e.g. "git
commit -m" is given a message without specifying "-e"), we used to
disable the spawning of the editor by overriding GIT_EDITOR, but
this means all the uses of the editor, other than to edit the
commit log message, are also affected.
* bp/commit-p-editor:
run-command: mark run_hook_with_custom_index as deprecated
merge hook tests: fix and update tests
merge: fix GIT_EDITOR override for commit hook
commit: fix patch hunk editing with "commit -p -m"
test patch hunk editing with "commit -p -m"
merge hook tests: use 'test_must_fail' instead of '!'
merge hook tests: fix missing '&&' in test
The progress output while repacking and transferring objects showed
an apparent large silence while writing the objects out of existing
packfiles, when the reachability bitmap was in use.
* jk/pack-bitmap-progress:
pack-objects: show reused packfile objects in "Counting objects"
pack-objects: show progress for reused packfiles
Instead of dying when asked to (re)pack with the reachability
bitmap when a bitmap cannot be built, just (re)pack without
producing a bitmap in such a case, with a warning.
* jk/pack-bitmap:
pack-objects: turn off bitmaps when skipping objects
"git commit --cleanup=<mode>" learned a new mode, scissors.
* nd/commit-editor-cleanup:
commit: add --cleanup=scissors
wt-status.c: move cut-line print code out to wt_status_add_cut_line
wt-status.c: make cut_line[] const to shrink .data section a bit
* jk/warn-on-object-refname-ambiguity:
rev-list: disable object/refname ambiguity check with --stdin
cat-file: restore warn_on_object_refname_ambiguity flag
cat-file: fix a minor memory leak in batch_objects
cat-file: refactor error handling of batch_objects
"git mv" that moves a submodule forgot to adjust the array that uses
to keep track of which submodules were to be moved to update its
configuration.
* jk/mv-submodules-fix:
mv: prevent mismatched data when ignoring errors.
builtin/mv: fix out of bounds write
Built-in commands can specify names for option arguments when usage text
is generated for a command. sh based commands should be able to do the
same.
Option argument name hint is any text that comes after [*=?!] after the
argument name up to the first whitespace.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Serving objects from a shallow repository needs to write a
temporary file to be used, but the serving upload-pack may not have
write access to the repository which is meant to be read-only.
Instead feed these temporary shallow bounds from the standard input
of pack-objects so that we do not have to use a temporary file.
* nd/upload-pack-shallow:
upload-pack: send shallow info over stdin to pack-objects
Serving objects from a shallow repository needs to write a
new file to hold the temporary shallow boundaries but it was not
cleaned when we exit due to die() or a signal.
* jk/shallow-update-fix:
shallow: verify shallow file after taking lock
shallow: automatically clean up shallow tempfiles
shallow: use stat_validity to check for up-to-date file
Replace open-coded reallocation with ALLOC_GROW() macro.
* dd/use-alloc-grow:
sha1_file.c: use ALLOC_GROW() in pretend_sha1_file()
read-cache.c: use ALLOC_GROW() in add_index_entry()
builtin/mktree.c: use ALLOC_GROW() in append_to_tree()
attr.c: use ALLOC_GROW() in handle_attr_line()
dir.c: use ALLOC_GROW() in create_simplify()
reflog-walk.c: use ALLOC_GROW()
replace_object.c: use ALLOC_GROW() in register_replace_object()
patch-ids.c: use ALLOC_GROW() in add_commit()
diffcore-rename.c: use ALLOC_GROW()
diff.c: use ALLOC_GROW()
commit.c: use ALLOC_GROW() in register_commit_graft()
cache-tree.c: use ALLOC_GROW() in find_subtree()
bundle.c: use ALLOC_GROW() in add_to_ref_list()
builtin/pack-objects.c: use ALLOC_GROW() in check_pbase_path()
"git clean -d pathspec" did not use the given pathspec correctly
and ended up cleaning too much.
* jk/clean-d-pathspec:
clean: simplify dir/not-dir logic
clean: respect pathspecs with "-d"
run_add_interactive() in builtin/add.c manually computes array bounds
and allocates a static args array to build the add--interactive command
line, which is error-prone. Use the argv-array helper functions instead.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't set GIT_EDITOR to ":" when calling prepare-commit-msg hook if the
editor is going to be called (e.g. with "merge -e").
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't change git environment: move the GIT_EDITOR=":" override to the
hook command subprocess, like it's already done for GIT_INDEX_FILE.
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We feed a string pointer that is potentially NULL to die() when
showing the message. Don't.
Noticed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack bitmap format requires that we have a single bit
for each object in the pack, and that each object's bitmap
represents its complete set of reachable objects. Therefore
we have no way to represent the bitmap of an object which
references objects outside the pack.
We notice this problem while generating the bitmaps, as we
try to find the offset of a particular object and realize
that we do not have it. In this case we die, and neither the
bitmap nor the pack is generated. This is correct, but
perhaps a little unfriendly. If you have bitmaps turned on
in the config, many repacks will fail which would otherwise
succeed. E.g., incremental repacks, repacks with "-l" when
you have alternates, ".keep" files.
Instead, this patch notices early that we are omitting some
objects from the pack and turns off bitmaps (with a
warning). Note that this is not strictly correct, as it's
possible that the object being omitted is not reachable from
any other object in the pack. In practice, this is almost
never the case, and there are two advantages to doing it
this way:
1. The code is much simpler, as we do not have to cleanly
abort the bitmap-generation process midway through.
2. We do not waste time partially generating bitmaps only
to find out that some object deep in the history is not
being packed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are sending a pack for push or fetch, we may reuse a
chunk of packfile without even parsing it. The progress
meter then looks like this:
Reusing existing pack: 3440489, done.
Counting objects: 3, done.
The first line shows that we are reusing a large chunk of
objects, and then we further count any objects not included
in the reused portion with an actual traversal.
These are all implementation details that the user does not
need to care about. Instead, we can show the reused objects
in the normal "counting..." progress meter (which will
simply go much faster than normal), and then continue to add
to it as we traverse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "--all-progress" option is in effect, pack-objects
shows a progress report for the "writing" phase. If the
repository has bitmaps and we are reusing a packfile, the
user sees no progress update until the whole packfile is
sent. Since this is typically the bulk of what is being
written, it can look like git hangs during this phase, even
though the transfer is proceeding.
This generally only happens with "git push" from a
repository with bitmaps. We do not use "--all-progress" for
fetch (since the result is going to index-pack on the
client, which takes care of progress reporting). And for
regular repacks to disk, we do not reuse packfiles.
We already have the progress meter setup during
write_reused_pack; we just need to call display_progress
whiel we are writing out the pack. The progress meter is
attached to our output descriptor, so it automatically
handles the throughput measurements.
However, we need to update the object count as we go, since
that is what feeds the percentage we show. We aren't
actually parsing the packfile as we send it, so we have no
idea how many objects we have sent; we only know that at the
end of N bytes, we will have sent M objects. So we cheat a
little and assume each object is M/N bytes (i.e., the mean
of the objects we are sending). While this isn't strictly
true, it actually produces a more pleasing progress meter
for the user, as it moves smoothly and predictably (and
nobody really cares about the object count; they care about
the percentage, and the object count is a proxy for that).
One alternative would be to actually show two progress
meters: one for the reused pack, and one for the rest of the
objects. That would more closely reflect the data we have
(the first would be measured in bytes, and the second
measured in objects). But it would also be more complex and
annoying to the user; rather than seeing one progress meter
counting up to 100%, they would finish one meter, then start
another one at zero.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We shrink the source and destination arrays, but not the modes or
submodule_gitfile arrays, resulting in potentially mismatched data. Shrink
all the arrays at the same time to prevent this. Add tests to ensure the
problem does not recur.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A warning from "git pack-objects" were generated by referring to an
incorrect variable when forming the filename that we had trouble
with.
* sh/write-pack-file-warning-message-fix:
write_pack_file: use correct variable in diagnostic
* mh/replace-refs-variable-rename:
Document some functions defined in object.c
Add docstrings for lookup_replace_object() and do_lookup_replace_object()
rename read_replace_refs to check_replace_refs
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
"git config" learned to read from the standard input when "-" is
given as the value to its "--file" parameter (attempting an
operation to update the configuration in the standard input of
course is rejected).
* ks/config-file-stdin:
config: teach "git config --file -" to read from the standard input
config: change git_config_with_options() interface
builtin/config.c: rename check_blob_write() -> check_write()
config: disallow relative include paths from blobs
* jk/janitorial-fixes:
open_istream(): do not dereference NULL in the error case
builtin/mv: don't use memory after free
utf8: use correct type for values in interval table
utf8: fix iconv error detection
notes-utils: handle boolean notes.rewritemode correctly
"git check-attr" when (trying to) work on a repository with a
working tree did not work well when the working tree was specified
via --work-tree (and obviously with --git-dir).
The command also works in a bare repository but it reads from the
(possibly stale, irrelevant and/or nonexistent) index, which may
need to be fixed to read from HEAD, but that is a completely
separate issue. As a related tangent to this separate issue, we
may want to also fix "check-ignore", which refuses to work in a
bare repository, to also operate in a bare one.
* jc/check-attr-honor-working-tree:
check-attr: move to the top of working tree when in non-bare repository
t0003: do not chdir the whole test process
Commit 25fba78 turned off the object/refname ambiguity check
during "git cat-file --batch" operations. However, this is a
global flag, so let's restore it when we are done.
This shouldn't make any practical difference, as cat-file
exits immediately afterwards, but is good code hygeine and
would prevent an unnecessary surprise if somebody starts to
call cmd_cat_file later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit a88c915 (mv: move submodules using a gitfile, 2013-07-30)
added the submodule_gitfile array, it was not added to the block that
enlarges the arrays when we are moving a directory so that we do not
have to worry about it being a directory when we perform the actual
move. After this, the loop continues over the enlarged set of sources.
Since we assume that submodule_gitfile has size argc, if any of the
items in the source directory are submodules we are guaranteed to write
beyond the end of submodule_gitfile.
Fix this by realloc'ing submodule_gitfile at the same time as the other
arrays.
Reported-by: Guillaume Gelin <contact@ramnes.eu>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before cdab485 (upload-pack: delegate rev walking in shallow fetch to
pack-objects - 2013-08-16) upload-pack does not write to the source
repository. cdab485 starts to write $GIT_DIR/shallow_XXXXXX if it's a
shallow fetch, so the source repo must be writable.
git:// servers do not need write access to repos and usually don't
have it, which means cdab485 breaks shallow clone over git://
Instead of using a temporary file as the media for shallow points, we
can send them over stdin to pack-objects as well. Prepend shallow
SHA-1 with --shallow so pack-objects knows what is what.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get a list of paths from read_directory, we further
prune it to create the final list of items to remove. The
code paths for directories and non-directories repeat the
same "add to list" code.
This patch restructures the code so that we don't repeat
ourselves. Also, by following a "if (condition) continue"
pattern like the pathspec check above, it makes it more
obvious that the conditional is about excluding directories
under certain circumstances.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean uses read_directory to fill in a `struct dir` with
potential hits. However, read_directory does not actually
check against our pathspec. It uses a simplified version
that may turn up false positives. As a result, we need to
check that any hits match our pathspec. We do so reliably
for non-directories. For directories, if "-d" is not given
we check that the pathspec matched exactly (i.e., we are
even stricter, and require an explicit "git clean foo" to
clean "foo/"). But if "-d" is given, rather than relaxing
the exact match to allow a recursive match, we do not check
the pathspec at all.
This regression was introduced in 113f10f (Make git-clean a
builtin, 2007-11-11).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
