The amount of logic in merge_trees() relative to renames was just a few
lines, but split it out into new handle_renames() and cleanup_renames()
functions to prepare for additional logic to be added to each. No code or
logic changes, just a new place to put stuff for when the rename detection
gains additional checks.
Note that process_renames() records pointers to various information (such
as diff_filepairs) into rename_conflict_info structs. Even though the
rename string_lists are not directly used once handle_renames() completes,
we should not immediately free the lists at the end of that function
because they store the information referenced in the rename_conflict_info,
which is used later in process_entry(). Thus the reason for a separate
cleanup_renames().
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move this function so it can re-use some others (without either
moving all of them or adding an annoying split between function
declarations and definitions). Cheat slightly by adding a blank line
for readability, and in order to silence checkpatch.pl.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I came up with the testcases in the first eight sections before coding up
the implementation. The testcases in this section were mostly ones I
thought of while coding/debugging, and which I was too lazy to insert
into the previous sections because I didn't want to re-label with all the
testcase references. :-)
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a long note about why we are not considering "partial directory
renames" for the current directory rename detection implementation.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a small number of misspellings, ".gitmodule", scattered
throughout the code base, correct them ... no apparent functional
changes.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among the "in progress" commands, only git-am and git-merge do not
support --quit. Support --quit in git-am too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a (probably harmless) parsing problem in
sq_dequote_step(), in which we parse some bogus input
incorrectly rather than complaining that it's bogus.
Our shell-dequoting function is very strict: it can unquote
everything generated by sq_quote(), but not arbitrary
strings. In particular, it only allows characters outside of
the single-quoted string if they are immediately backslashed
and then the single-quoted string is resumed. So:
'foo'\''bar'
is OK. But these are not:
'foo'\'bar
'foo'\'
'foo'\'\''bar'
even though they are all valid shell. The parser has a funny
corner case here. When we see a backslashed character, we
keep incrementing the "src" pointer as we parse it. For a
single sq_dequote() call, that's OK; our next step is to
bail with an error, and we don't care where "src" points.
But if we're parsing multiple strings with sq_dequote_to_argv(),
then our next step is to see if the string is followed by
whitespace. Because we erroneously incremented the "src"
pointer, we don't barf on the bogus backslash that we
skipped. Instead, we may find whitespace that immediately
follows it, and continue as if all is well (skipping the
backslashed character completely!).
In practice, this shouldn't be a big deal. The input is
bogus, and our sq_quote() would never generate this bogus
input. In all but one callers, we are parsing input created
by an earlier call to sq_quote(). That final case is "git
shell", which parses shell-quoting generated by the client.
And in that case we use the singular sq_quote(), which has
always behaved correctly.
One might also wonder if you could provoke a read past the
end of the string. But the answer is no; we still parse
character by character, and would never advance past a NUL.
This patch implements the minimal fix, along with
documenting the restriction (which confused at least me
while reading the code). We should possibly consider
being more liberal in accepting valid shell-quoted words. I
suspect the code may actually be simpler, and it would be
more friendly to anybody generating or editing input by
hand. But I wanted to fix just the immediate bug in this
patch.
We don't have a direct way to unit-test the sq_dequote()
functions, but we can do this by feeding input to
GIT_CONFIG_PARAMETERS (which is not normally a user-facing
interface, but serves here as it expects to see sq_quote()
input from "git -c"). I've included both a bogus example,
and a related "good" one to confirm that we still parse it
correctly.
Noticed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hashmap API always use an unsigned value for storing
and comparing hashes. Whereas this test code uses "int".
This works out in practice since one can typically
round-trip between "int" and "unsigned int". But since this
is essentially reference code for the hashmap API, we should
model using the correct types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes two ptr/len pairs, which implies that
they can be arbitrary buffers. But internally, it assumes
that each "ptr" is NUL-terminated at "len" (because we
memcpy an extra byte to pick up the NUL terminator).
In practice this works because each caller only ever passes
strlen(ptr) as the length. But let's drop the "len"
parameters to make our expectations clear.
Note that we can get rid of the "l1" and "l2" variables from
cmd_main() as a further cleanup, since they are now mostly
used to check whether the p1 and p2 arguments are present
(technically the length parameters conflated NULL with the
empty string, which we no longer do, but I think that is
actually an improvement).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using fgets() with a fixed-size buffer can lead to lines
being accidentally split across two calls if they are larger
than the buffer size.
As this is just a test helper, this is unlikely to be a
problem in practice. But since people may look at test
helpers as reference code, it's a good idea for them to
model the preferred behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, using a bare snprintf can truncate the resulting
buffer, leading to confusing results. In this case we know
that our buffer is sized large enough to accommodate our
loop, so there's no bug. However, we should use xsnprintf()
to document (and check) that assumption, and to model good
practice to people reading the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we allocate the test_entry flex-struct, we have to add
up all of the elements that go into the flex array. If these
were to overflow a size_t, this would allocate a too-small
buffer, which we would then overflow in our memcpy steps.
Since this is just a test-helper, it probably doesn't matter
in practice, but we should model the correct technique by
using the st_add() macros.
Unfortunately, we cannot use the FLEX_ALLOC() macros here,
because we are stuffing two different buffers into a single
flex array.
While we're here, let's also swap out "malloc" for our
error-checking "xmalloc", and use the preferred
"sizeof(*var)" instead of "sizeof(type)".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two array allocations have several minor flaws:
- they use bare malloc, rather than our error-checking
xmalloc
- they do a bare multiplication to determine the total
size (which in theory can overflow, though in this case
the sizes are all constants)
- they use sizeof(type), but the type in the second one
doesn't match the actual array (though it's "int" versus
"unsigned int", which are guaranteed by C99 to have the
same size)
None of these are likely to be problems in practice, and
this is just a test helper. But since people often look at
test helpers as reference code, we should do our best to
model the recommended techniques.
Switching to ALLOC_ARRAY fixes all three.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the reference to setting core.fsmonitor to `true` (or `false`) as those
are not valid settings.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Travis updates.
* sg/travis-linux32-sanity:
travis-ci: don't fail if user already exists on 32 bit Linux build job
travis-ci: don't run the test suite as root in the 32 bit Linux build
travis-ci: don't repeat the path of the cache directory
travis-ci: use 'set -e' in the 32 bit Linux build job
travis-ci: use 'set -x' for the commands under 'su' in the 32 bit Linux build
The sequencer infrastructure is shared across "git cherry-pick",
"git rebase -i", etc., and has always spawned "git commit" when it
needs to create a commit. It has been taught to do so internally,
when able, by reusing the codepath "git commit" itself uses, which
gives performance boost for a few tens of percents in some sample
scenarios.
* pw/sequencer-in-process-commit:
sequencer: run 'prepare-commit-msg' hook
t7505: add tests for cherry-pick and rebase -i/-p
t7505: style fixes
sequencer: assign only free()able strings to gpg_sign
sequencer: improve config handling
t3512/t3513: remove KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1
sequencer: try to commit without forking 'git commit'
sequencer: load commit related config
sequencer: simplify adding Signed-off-by: trailer
commit: move print_commit_summary() to libgit
commit: move post-rewrite code to libgit
Add a function to update HEAD after creating a commit
commit: move empty message checks to libgit
t3404: check intermediate squash messages
Completion of "git merge -s<strategy>" (in contrib/) did not work
well in non-C locale.
* nd/list-merge-strategy:
completion: fix completing merge strategies on non-C locales
Code clean-up.
* nd/shared-index-fix:
read-cache: don't write index twice if we can't write shared index
read-cache.c: move tempfile creation/cleanup out of write_shared_index
read-cache.c: change type of "temp" in write_shared_index()
Prevent "clang-format" from breaking line after function return type.
* po/clang-format-functype-weight:
clang-format: adjust penalty for return type line break
The split-index mode had a few corner case bugs fixed.
* tg/split-index-fixes:
travis: run tests with GIT_TEST_SPLIT_INDEX
split-index: don't write cache tree with null oid entries
read-cache: fix reading the shared index for other repos
Update Coccinelle rules to catch and optimize strbuf_addf(&buf, "%s", str)
* rs/strbuf-cocci-workaround:
cocci: use format keyword instead of a literal string
Crash fix for a corner case where an error codepath tried to unlock
what it did not acquire lock on.
* mr/packed-ref-store-fix:
files_initial_transaction_commit(): only unlock if locked
The http tracing code, often used to debug connection issues,
learned to redact potentially sensitive information from its output
so that it can be more safely sharable.
* jt/http-redact-cookies:
http: support omitting data from traces
http: support cookie redaction when tracing
The tracing machinery learned to report tweaking of environment
variables as well.
* nd/trace-with-env:
run-command.c: print new cwd in trace_run_command()
run-command.c: print env vars in trace_run_command()
run-command.c: print program 'git' when tracing git_cmd mode
run-command.c: introduce trace_run_command()
trace.c: move strbuf_release() out of print_trace_line()
trace: avoid unnecessary quoting
sq_quote_argv: drop maxlen parameter
Rewrite two more "git submodule" subcommands in C.
* pc/submodule-helper:
submodule: port submodule subcommand 'deinit' from shell to C
submodule: port submodule subcommand 'sync' from shell to C
Avoid showing a warning message in the middle of a line of "git
diff" output.
* nd/diff-flush-before-warning:
diff.c: flush stdout before printing rename warnings
Doc updates.
* ks/submodule-doc-updates:
Doc/git-submodule: improve readability and grammar of a sentence
Doc/gitsubmodules: make some changes to improve readability and syntax
