In 'clear_pathspec()' the incorrect index parameter is used to bound an
inner-loop which is used to free a 'struct attr_match' value field.
Using the incorrect index parameter (in addition to being incorrect)
occasionally causes segmentation faults when attempting to free an
invalid pointer. Fix this by using the correct index parameter 'i'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the cleanup phase for the grep command to free the pathspec
struct that's allocated earlier in the same block, and used just a few
lines earlier.
With "grep hi README.md" valgrind reports a loss of 239 bytes now,
down from 351.
The relevant --num-callers=40 --leak-check=full --show-leak-kinds=all
backtrace is:
[...] 187 (112 direct, 75 indirect) bytes in 1 blocks are definitely lost in loss record 70 of 110
[...] at 0x4C2BBAF: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
[...] by 0x60B339: do_xmalloc (wrapper.c:59)
[...] by 0x60B2F6: xmalloc (wrapper.c:86)
[...] by 0x576B37: parse_pathspec (pathspec.c:652)
[...] by 0x4519F0: cmd_grep (grep.c:1215)
[...] by 0x4062EF: run_builtin (git.c:371)
[...] by 0x40544D: handle_builtin (git.c:572)
[...] by 0x4060A2: run_argv (git.c:624)
[...] by 0x4051C6: cmd_main (git.c:701)
[...] by 0x4C5901: main (common-main.c:43)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e9d9a8a4d (connect: handle putty/plink also in
GIT_SSH_COMMAND, 2017-01-02) added a call to
split_cmdline(), but checks only for a non-zero return to
see if we got any output. Since the function returns
negative values (and a NULL argv) on error, we end up
dereferencing NULL and segfaulting.
Arguably we could report on the parsing error here, but it's
probably not worth it. This is a best-effort attempt to see
if we are using plink. So we can simply return here with
"no, it wasn't plink" and let the shell actually complain
about the bogus quoting.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a dedicated build job for static analysis. As a starter we only run
coccicheck but in the future we could run Clang Static Analyzer or
similar tools, too.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach traverse_trees_recursive() to not do redundant ODB
lookups when both directories refer to the same OID.
In operations such as read-tree and checkout, there will
likely be many peer directories that have the same OID when
the differences between the commits are relatively small.
In these cases we can avoid hitting the ODB multiple times
for the same OID.
This patch handles n=2 and n=3 cases and simply copies the
data rather than repeating the fill_tree_descriptor().
================
On the Windows repo (500K trees, 3.1M files, 450MB index),
this reduced the overall time by 0.75 seconds when cycling
between 2 commits with a single file difference.
(avg) before: 22.699
(avg) after: 21.955
===============
================
On Linux using p0006-read-tree-checkout.sh with linux.git:
Test HEAD^ HEAD
-------------------------------------------------------------------------------------------------------
0006.2: read-tree br_base br_ballast (57994) 0.24(0.20+0.03) 0.24(0.22+0.01) +0.0%
0006.3: switch between br_base br_ballast (57994) 10.58(6.23+2.86) 10.67(5.94+2.87) +0.9%
0006.4: switch between br_ballast br_ballast_plus_1 (57994) 0.60(0.44+0.17) 0.57(0.44+0.14) -5.0%
0006.5: switch between aliases (57994) 0.59(0.48+0.13) 0.57(0.44+0.15) -3.4%
================
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strcmp_offset() function to also return the offset of the
first change.
Add unit test and helper to verify.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use ALLOC_GROW() macro when reallocing a string_list array
rather than simply increasing it by 32. This is a performance
optimization.
During status on a very large repo and there are many changes,
a significant percentage of the total run time is spent
reallocing the wt_status.changes array.
This change decreases the time in wt_status_collect_changes_worktree()
from 125 seconds to 45 seconds on my very large repository.
This produced a modest gain on my 1M file artificial repo, but
broke even on linux.git.
Test HEAD^^ HEAD
---------------------------------------------------------------------------------------
0005.2: read-tree status br_ballast (1000001) 8.29(5.62+2.62) 8.22(5.57+2.63) -0.8%
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to skip verification of the SHA1-1 checksum at the end of
the index file in verify_hdr() which is called from read_index()
unless the "force_verify_index_checksum" global variable is set.
Teach fsck to force this verification.
The checksum verification is for detecting disk corruption, and for
small projects, the time it takes to compute SHA-1 is not that
significant, but for gigantic repositories this calculation adds
significant time to every command.
These effect can be seen using t/perf/p0002-read-cache.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------------
0002.1: read_cache/discard_cache 1000 times 0.66(0.44+0.20) 0.30(0.27+0.02) -54.5%
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous to commit 5d8f084a5 (pathspec: simpler logic to prefix original
pathspec elements, 2017-01-04), we were always using the computed
`match` variable to perform pathspec matching whenever
`PATHSPEC_PREFIX_ORIGIN` is set. This is for example useful when passing
the parsed pathspecs to other commands, as the computed `match` may
contain a pathspec relative to the repository root. The commit changed
this logic to only do so when we do have an actual prefix and when
literal pathspecs are deactivated.
But this change may actually break some commands which expect passed
pathspecs to be relative to the repository root. One such case is `git
add --patch`, which now fails when using relative paths from a
subdirectory. For example if executing "git add -p ../foo.c" in a
subdirectory, the `git-add--interactive` command will directly pass
"../foo.c" to `git-ls-files`. As ls-files is executed at the
repository's root, the command will notice that "../foo.c" is outside
the repository and fail.
Fix the issue by again using the computed `match` variable when
`PATHSPEC_PREFIX_ORIGIN` is set and global literal pathspecs are
deactivated. Note that in contrast to previous behavior, we will now
always call `prefix_magic` regardless of whether a prefix is actually
set. But this is the right thing to do: when the `match` variable has
been resolved to the repository's root, it will be set to an empty
string. When passing the empty string directly to other commands, it
will result in a warning regarding deprecated empty pathspecs. By always
adding the prefix magic, we will end up with at least the string
":(prefix:0)" and thus avoid the warning.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
$GIT_DIR returned by get_git_dir() is normalized, with all symlinks
resolved (see setup_work_tree function). In order to match paths (or
patterns) against $GIT_DIR char-by-char, they have to be normalized
too. There is a note in config.txt about this, that the user need to
resolve symlinks by themselves if needed.
The problem is, we allow certain path expansion, '~/' and './', for
convenience and can't ask the user to resolve symlinks in these
expansions. Make sure the expanded paths have all symlinks resolved.
PS. The strbuf_realpath(&text, get_git_dir(), 1) is still needed because
get_git_dir() may return relative path.
Noticed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch we need the ability to expand '~' to
real_path($HOME). But we can't do that from outside because '~' is part
of a pattern, not a true path. Add an option to expand_user_path() to do
so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever a git command is present in the upstream of a pipe, its failure
gets masked by piping. Hence we should avoid it for testing the
upstream git command. By writing out the output of the git command to
a file, we can test the exit codes of both the commands as a failure exit
code in any command is able to stop the && chain.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a new function from `do_for_each_ref()`. It will be useful
elsewhere.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a new function from `refs_resolve_ref_unsafe()`. It will be
useful elsewhere.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since references under "refs/bisect/" are per-worktree, they have to
be sought in the worktree rather than in the main repository. But
since loose references are found by traversing directories, the
reference iterator won't even get the idea to look for a
"refs/bisect/" directory in the worktree if there is not a directory
with that name in the main repository. Thus `get_ref_dir()` manually
inserts a dir_entry for "refs/bisect/" whenever it reads the entry for
"refs/".
The current code then immediately calls `read_loose_refs()` on that
directory. But since the dir_entry is created with its `incomplete`
flag set, any traversal that gets to this point will read the
directory automatically. So there is no need to call
`read_loose_refs()` explicitly; the lazy mechanism suffices.
And in fact, the attempt to `read_loose_refs()` was broken anyway.
That function needs its `dirname` argument to have a trailing `/`
character, but the invocation here was passing it "refs/bisect"
without a trailing slash. So `read_loose_refs()` would read
`$GIT_DIR/refs/bisect" correctly, but if it found an entry "foo" in
that directory, it would try to read "$GIT_DIR/refs/bisectfoo".
Normally it wouldn't find anything at that path, but the failure was
canceled out because `get_ref_dir()` *also* forgot to reset the
`REF_INCOMPLETE` bit on the dir_entry. So the read was attempted again
when it was accessed, via the lazy mechanism, and this time the read
was done correctly.
This code has been broken since it was first introduced.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It only has one caller, not worth keeping just for convenience.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A small step towards making files-backend work as a non-main ref store
using the newly added store-aware API.
For the record, `join` and `nm` on refs.o and files-backend.o tell me
that files-backend no longer uses functions that default to
get_main_ref_store().
I'm not yet comfortable at the idea of removing
files_assert_main_repository() (or converting REF_STORE_MAIN to
REF_STORE_WRITE). More staring and testing is required before that can
happen. Well, except peel_ref(). I'm pretty sure that function is safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transaction struct now takes a ref store at creation and will
operate on that ref store alone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not meant to cover all existing API. It adds enough to test ref
stores with the new test program test-ref-store, coming soon and to be
used by files-backend.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is intended to replace *_submodule() refs API. It provides
a ref store for a specific submodule, which can be operated on by a new
set of refs API.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
files-backend.c is unlearning submodules. Instead of having a specific
check for submodules to see what operation is allowed, files backend
now takes a set of flags at init. Each operation will check if the
required flags is present before performing.
For now we have four flags: read, write and odb access. Main ref store
has all flags, obviously, while submodule stores are read-only and have
access to odb (*).
The "main" flag stays because many functions in the backend calls
frontend ones without a ref store, so these functions always target the
main ref store. Ideally the flag should be gone after ref-store-aware
api is in place and used by backends.
(*) Submodule code needs for_each_ref. Try take REF_STORE_ODB flag
out. At least t3404 would fail. The "have access to odb" in submodule is
a bit hacky since we don't know from he whether add_submodule_odb() has
been called.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most callers to this function already require that they are in a
git repository, but there is an exception: "git apply" uses
has_sha1_file to avoid work if the result of applying a binary
patch is already present in the repository. When run outside any
repository, this produces an error:
fatal: BUG: setup_git_env called without repository
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, in order to push some large repos where a server does
not support chunked encoding, the http postbuffer must sometimes
exceed two gigabytes. On a 64-bit system, this is OK: we just malloc
a larger buffer.
This means that we need to use CURLOPT_POSTFIELDSIZE_LARGE to set the
buffer size.
Signed-off-by: David Turner <dturner@twosigma.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One message appears twice in the translations and the only
difference is a dot at the end. So add this dot to make
the messages being identical.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The left and right base directories were pointed to the buf field of
two strbufs, which were subject to change.
A contrived test case shows the problem where a file with a long enough
name to force the strbuf to grow is up-to-date (hence the code path is
used where the work tree's version of the file is reused), and then a
file that is not up-to-date needs to be written (hence the code path is
used where checkout_entry() uses the previously recorded base_dir that
is invalid by now).
Let's just copy the base_dir strings for use with checkout_entry(),
never touch them until the end, and release them then. This is an easily
verifiable fix (as opposed to the next-obvious alternative: to re-set
base_dir after every loop iteration).
This fixes https://github.com/git-for-windows/git/issues/1124
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-diff understands "--ours", "--theirs" and "--base" for files with
conflicts. But so far they were not documented for the central diff
command but only for diff-files.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The instructions how to normalize the line endings should have been updated
as part of commit 6523728499 'convert: unify the "auto" handling of CRLF',
(but that part never made it into the commit).
Update the documentation in Documentation/gitattributes.txt and add
a test case in t0025.
Reported by Kristian Adrup
https://github.com/git-for-windows/git/issues/954
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, the whole http.proxy option string was passed to curl without
any preprocessing so curl could complain about the invalid proxy
configuration.
After the commit 372370f167 ("http: use credential API to handle proxy
authentication", 2016-01-26), if the user specified an invalid HTTP
proxy option in the configuration, then the option parsing silently
fails and NULL will be passed to curl as a proxy. This forces curl to
fall back to detecting the proxy configuration from the environment,
causing the http.proxy option ignoring.
Fix this issue by checking the proxy option parsing result. If parsing
failed then print an error message and die. Such behaviour allows the
user to quickly figure the proxy misconfiguration and correct it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Curl distinguishes between an empty proxy address and a NULL proxy
address. In the first case it completely disables proxy usage, but if
the proxy address option is NULL then curl attempts to determine the
proxy address from the http_proxy environment variable.
According to the documentation, if the http.proxy option is set to an
empty string, git should bypass proxy and connect to the server
directly:
export http_proxy=http://network-proxy/
cd ~/foobar-project
git config remote.origin.proxy ""
git fetch
Previously, proxy host was configured by one line:
curl_easy_setopt(result, CURLOPT_PROXY, curl_http_proxy);
Commit 372370f167 ("http: use credential API to handle proxy
authentication", 2016-01-26) parses the proxy option, then extracts the
proxy host address and updates the curl configuration, making the
previous call a noop:
credential_from_url(&proxy_auth, curl_http_proxy);
curl_easy_setopt(result, CURLOPT_PROXY, proxy_auth.host);
But if the proxy option is empty then the proxy host field becomes NULL.
This forces curl to fall back to detecting the proxy configuration from
the environment, causing the http.proxy option to not work anymore.
Fix this issue by explicitly handling http.proxy being set the empty
string. This also makes the code a bit more clear and should help us
avoid such regressions in the future.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lazy-init codepath will not be exercised uniless threaded. Skip
the entire test on a single-core box. Also replace a hard-coded
constant of 2000 (number of cache entries to manifacture for tests)
with a variable with a human readable name.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created helper executable to print the value of online_cpus()
allowing multi-threaded tests to be skipped when appropriate.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty line should stop any pending in-body headers, and start the
actual body parsing.
This also modifies the original test for the in-body headers to actually
have a real commit body that starts with spaces, and changes the test to
check that the long line matches _exactly_, and doesn't get extra data
from the body.
Fixes:6b4b013f1884 ("mailinfo: handle in-body header continuations")
Cc: Jonathan Tan <jonathantanmy@google.com>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "push --recurse-submodules" to propagate, if given a name as remote, the
provided remote and refspec recursively to the pushes performed in the
submodules. The push will therefore only succeed if all submodules have a
remote with such a name configured.
Note that "push --recurse-submodules" with a path or URL as remote will not
propagate the remote or refspec and instead use the default remote and refspec
configured in the submodule, preserving the current behavior.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'push-check' subcommand to submodule--helper which is used to
check if the provided remote and refspec can be used as part of a push
operation in the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch needs access to the 'parse_push_refspec()' function so
let's export the function so other modules can use it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach push --recurse-submodules to propagate push-options recursively to
the pushes performed in the submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define a new task in .travis.yml that triggers a test session on
Windows run elsewhere.
* ls/travis-relays-for-windows-ci:
travis-ci: build and test Git on Windows
The default behaviour of "git log" in an interactive session has
been changed to enable "--decorate".
* ah/log-decorate-default-to-auto:
log: if --decorate is not given, default to --decorate=auto
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
David reported:
> When I try to run `git diff --submodule=diff` in a submodule which has
> it's own submodules that have changes I get the error: fatal: bad
> object.
This happens, because we do not properly initialize the environment
in which the diff is run in the submodule. That means we inherit the
environment from the main process, which sets environment variables.
(Apparently we do set environment variables which we do not set
when not in a submodules, i.e. the .git directory is linked)
This commit, just like fd47ae6a5b (diff: teach diff to display
submodule difference with an inline diff, 2016-08-31) introduces bad
test code (i.e. hard coded hash values), which will be cleanup up in
a later patch.
Reported-by: David Parrish <daveparrish@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There isn't any obvious reason for the 'struct string_list push_options'
and 'struct string_list_item *item' to be marked as static, so unmark
them as being static. Also, clear the push_options string_list to
prevent memory leaking.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
