Many examples of git command invocation are given in asciidoc listing
blocks, which makes them monospaced and avoids further interpretation of
special characters. Some manpages make a list of examples, like:
git foo::
Run git foo.
git foo -q::
Use the "-q" option.
to quickly show many variants. However, they can sometimes be hard to
read, because they are shown in a proportional-width font (so, for
example, seeing the difference between "-- foo" and "--foo" can be
difficult).
This patch puts all such examples into backticks, which gives the
equivalent formatting to a listing block (i.e., monospaced and without
character interpretation).
As a bonus, this also fixes an example in the git-push manpage, in which
"git push origin :::" was accidentally considered a newly-indented list,
and not a list item with "git push origin :" in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AsciiDoc versions since 5.0.6 treat a double-dash surrounded by spaces
(outside of verbatim environments) as a request to insert an em dash.
Such versions also treat the three-character sequence "\--", when not
followed by another dash, as a request to insert two literal minus
signs. Thus from time to time there have been patches to add
backslashes to AsciiDoc markup to escape double-dashes that are meant
to be represent '--' characters used literally on the command line;
see v1.4.0-rc1~174, Fix up docs where "--" isn't displayed correctly,
2006-05-05, for example.
AsciiDoc 6.0.3 (2005-04-20) made life harder by also treating
double-dashes without surrounding whitespace as markup for an em dash,
though only when formatting for backends other than the manpages
(e.g., HTML). Many pages needed to be changed to use a backslash
before the "--" in names of command-line flags like "--add" (see
v0.99.6~37, Update tutorial, 2005-08-30).
AsciiDoc 8.3.0 (2008-11-29) refined the em-dash rule to avoid that
requirement. Double-dashes without surrounding spaces are not
rendered as em dashes any more unless bordered on both sides by
alphanumeric characters. The unescaped markup for option names (e.g.,
"--add") works fine, and many instances of this style have leaked into
Documentation/; git's HTML documentation contains many spurious em
dashes when formatted by an older toolchain. (This patch will not
change that.)
The upshot: "--" as an isolated word and in phrases like "git
web--browse" must be escaped if it is not to be rendered as an em dash
by current asciidoc. Use "\--" to avoid such misformatting in
sentences in which "--" represents a literal double-minus command line
argument that separates options and revs from pathspecs, and use
"{litdd}" in cases where the double-dash is embedded in the command
name. The latter is just for consistency with v1.7.3-rc0~13^2 (Work
around em-dash handling in newer AsciiDoc, 2010-08-23).
List of lines to fix found by grepping manpages for "(em".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
For example, this would allow cherry-picking or reverting patches from
a piece of history with a different end-of-line style, like so:
$ git revert -Xrenormalize old-problematic-commit
Currently that is possible with manual use of merge-recursive but the
cherry-pick/revert porcelain does not expose the functionality.
While at it, document the existing support for --strategy.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manual pages of cherry-pick and revert had examples with two revisions
on the same line in the examples section, that looked like this:
git cherry-pick master~4 master~2::
Unfortunately, this is taken as a mark-up to make the part between two
tildes, "4 master", subscript. Use {tilde} to make it explicit that we
do want ~ characters in these places (backslash does not help).
Reported-by: Sylvain Rabot <sylvain.rabot@f-secure.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And while at it, add an "EXAMPLES" section.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Use `code snippet` style instead of 'emphasis' for `git cmd ...`
according to the following rules:
* The SYNOPSIS sections are left untouched.
* If the intent is that the user type the command exactly as given, it
is `code`.
If the user is only loosely referred to a command and/or option, it
remains 'emphasised'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Based on its name, people may read the 'git revert' documentation when
they want to undo local changes, especially people who have used other
SCM's. 'git revert' may not be what they had in mind, but git
provides several other ways to undo changes to files. We can help
them by pointing them towards the git commands that do what they might
want to do.
Cc: Daniel Barkalow <barkalow@iabervon.org>
Cc: Lea Wiemann <lewiemann@gmail.com>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing 1.5.6.4 release notes
git fetch-pack: do not complain about "no common commits" in an empty repo
rebase-i: keep old parents when preserving merges
t7600-merge: Use test_expect_failure to test option parsing
Fix buffer overflow in prepare_attr_stack
Fix buffer overflow in git diff
Fix buffer overflow in git-grep
git-cvsserver: fix call to nonexistant cleanupWorkDir()
Documentation/git-cherry-pick.txt et al.: Fix misleading -n description
Conflicts:
RelNotes
The manual page of git-cherry-pick and git-revert asserts that -n works
primarily on the working tree, while in fact the primary object it operates
on is the index, and the changes only "accidentally" propagate to the
working tree. This e.g. leads innocent #git IRC folks to believe that you
can use -n to prepare changes for git-add -i staging.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I often find myself pulling patches off of other peoples trees using
cherry-pick, and following it with an immediate 'git commit --amend -s'
command. Eliminate the need for a double commit by allowing signoff on a
cherry-pick or revert.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually you cannot revert a merge because you do not know which
side of the merge should be considered the mainline (iow, what
change to reverse).
With this patch, cherry-pick and revert learn -m (--mainline)
option that lets you specify the parent number (starting from 1)
of the mainline, so that you can:
git revert -m 1 $merge
to reverse the changes introduced by the $merge commit relative
to its first parent, and:
git cherry-pick -m 2 $merge
to replay the changes introduced by the $merge commit relative
to its second parent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision specification syntax (sometimes referred to as
SHA1-expressions) is accepted almost everywhere in Git by
almost every tool. Unfortunately it is only documented in
git-rev-parse.txt, and most users don't know to look there.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Added the -e option to the documentation of git-cherry-pick.
* Added the -e and --no-commit option to git-revert.
* Removed redundant case expression for -n as --no-edit (already taken by
--no-commit).
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This switch was not documented properly. I decided not to mention
the --no-edit switch in the git-cherry-pick documentation since
we always default to no editing.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
