Noted by Jiri Slaby, git-tar-tree --remote doesn't need to be run
from inside of a git archive. Since git-tar-tree is now only a
wrapper for git-archive, which calls setup_git_directory() as
needed, we should drop the flag RUN_SETUP.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Still not managed to understand git-send-mail sufficiently well to not
accidently miss of this list when I sending it to Junio
Signed-off-by: Alan Chandler <alan@chandlerfamily.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The command now issues a big deprecation warning message and runs
git-archive command with appropriate arguments.
git-tar-tree $tree_ish $base always forces $base to be the leading
directory name, so the --prefix parameter passed internally to
git-archive is a slash appended to it, i.e. "--prefix=$base/".
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-zip-tree can be safely removed because it was never part of a formal
release. This patch makes 'git-archive --format=zip' the one and only git
ZIP file creation command.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jk/diff:
wt-status: remove extraneous newline from 'deleted:' output
git-status: document colorization config options
Teach runstatus about --untracked
git-commit.sh: convert run_status to a C builtin
Move color option parsing out of diff.c and into color.[ch]
diff: support custom callbacks for output
* jc/archive:
git-tar-tree: devolve git-tar-tree into a wrapper for git-archive
git-archive: inline default_parse_extra()
builtin-archive.c: rename remote_request() to extract_remote_arg()
upload-archive: monitor child communication more carefully.
Add sideband status report to git-archive protocol
Prepare larger packet buffer for upload-pack protocol.
Teach --exec to git-archive --remote
Add --verbose to git-archive
archive: force line buffered output to stderr
Use xstrdup instead of strdup in builtin-{tar,zip}-tree.c
Move sideband server side support into reusable form.
Move sideband client side support into reusable form.
archive: allow remote to have more formats than we understand.
git-archive: make compression level of ZIP archives configurable
Add git-upload-archive
git-archive: wire up ZIP format.
git-archive: wire up TAR format.
Add git-archive
describe, git: Handle argc==0 case the same way as argc==1.
merge-tree: Refuse excessive arguments.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Call setup_git_directory() to make these commands work in subdirectory.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command implements the git archive protocol on the server
side. This command is not intended to be used by the end user.
Underlying git-archive command line options are sent over the
protocol from "git-archive --remote=...", just like upload-tar
currently does with "git-tar-tree=...".
As for "git-archive" command implementation, this new command
does not execute any existing "git-{tar,zip}-tree" but rely
on the archive API defined by "git-archive" patch. Hence we
get 2 good points:
- "git-archive" and "git-upload-archive" share all option
parsing code.
- All kind of git-upload-{tar,zip} can be deprecated.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-archive is a command to make TAR and ZIP archives of a git tree.
It helps prevent a proliferation of git-{format}-tree commands.
Instead of directly calling git-{tar,zip}-tree command, it defines
a very simple API, that archiver should implement and register in
"git-archive.c". This API is made up by 2 functions whose prototype
is defined in "archive.h" file.
- The first one is used to parse 'extra' parameters which have
signification only for the specific archiver. That would allow
different archive backends to have different kind of options.
- The second one is used to ask to an archive backend to build
the archive given some already resolved parameters.
The main reason for making this API is to avoid using
git-{tar,zip}-tree commands, hence making them useless. Maybe it's
time for them to die ?
It also implements remote operations by defining a very simple
protocol: it first sends the name of the specific uploader followed
the repository name (git-upload-tar git://example.org/repo.git).
Then it sends options. It's done by sending a sequence of one
argument per packet, with prefix "argument ", followed by a flush.
The remote protocol is implemented in "git-archive.c" for client
side and is triggered by "--remote=<repo>" option. For example,
to fetch a TAR archive in a remote repo, you can issue:
$ git archive --format=tar --remote=git://xxx/yyy/zzz.git HEAD
We choose to not make a new command "git-fetch-archive" for example,
avoind one more GIT command which should be nice for users (less
commands to remember, keeps existing --remote option).
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This creates a new git-runstatus which should do roughly the same thing
as the run_status function from git-commit.sh. Except for color support,
the main focus has been to keep the output identical, so that it can be
verified as correct and then used as a C platform for other improvements to
the status printing code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some memory was allocated for a new path but not freed
after the path was used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.
Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.
Note that this behavior is not compatible with the
previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
This patch makes it possible to get trace information when
running "make test".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change places that use realloc, without a proper error path, to instead use
xrealloc. Drop an erroneous error path in the daemon code that used errno
in the die message in favour of the simpler xrealloc.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-mv.c and git.c has a nested loop that is governed by a
variable 'i', but they shadow it with another instance of 'i'.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Convert git-verify-pack to a builtin command. Also rename ac to argc
and av to argv for consistancy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The semantics are equivalent to pushing from the root; we just try harder to
find the .git directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As Matthias Kestenholz noted, the flag does not quite mean
"needs prefix" -- it is more like "run setup_git_directory()
before running this command", so rename it to avoid future
confusion.
While we are at it, rewrite the definition of options to make it
obvious that we are talking about flag bits by using standard (1<<n)
notation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the build procedure for built-in commands by:
- generating mostly redundant definition of BUILT_INS from
BUILTIN_OBJS in the Makefile,
- renaming a few files to make the above possible, and
- sorting the built-in command table in git.c.
It might be a good idea to binary search (or perfect hash) the built-in
command table, but that can be done later when somebody feels like.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The cmd_usage() routine was causing warning messages due to a NULL
format parameter being passed in three out of four calls. This is a
problem if you want to compile with -Werror. A simple solution is to
simply remove the GNU __attribute__ format pragma from the cmd_usage()
declaration in the header file. The function interface was somewhat
muddled anyway, so re-write the code to finesse the problem.
[jc: this incidentally revealed that t9100 test assumed that the output
from "git help" to be fixed in stone, but this patch lower-cases
"Usage" to "usage". Update the test not to rely on "git help" output.]
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the built-in "always-use-pager" logic for log family
to the command dispatch table of git wrapper. This makes it
easier to change the default use of pager, and has an added
benefit that we fork and exec the pager early before packs are
mmapped.
Pointed out by Juergen Ruehle <j.ruehle@bmiag.de>.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, the configuration mechanism can be used to say:
[alias]
init = init-db --template=/path/to/template
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This merges the new built-in calling convention code into Johannes's
builtin-mv topic in order to resolve their conflicts early on.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also moves add_file_to_index() to read-cache.c. Oh, and while
touching builtin-add.c, it also removes a duplicate git_config() call.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, you can say
git --bare repack -a -d
inside a bare repository, and it will actually work. While at it,
also move the --version, --help and --exec-path options to the
handle_options() function.
While at documenting the new options, also document the --paginate
option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, something like
[alias]
pd = -p diff
works as expected.
[jc: a follow-up fix from Jeff King folded in.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
This allows you to say:
git -p diff v2.6.16-rc5..
and the command pipes the output of any git command to your pager.
[jc: this resurrects a month old RFC patch with improvement
suggested by Linus to call it --paginate instead of --less.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the environment variable GIT_TRACE set git will show
- alias expansion
- built-in command execution
- external command execution
on stderr.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This actually removes the objects to be pruned, unless you specify "-n"
(at which point it will just tell you which files it would prune).
This doesn't do the pack-file pruning that the shell-script used to do,
but if somebody really wants to, they could add it easily enough. I wonder
how useful it is, though, considering that "git repack -a -d" is just a
lot more efficient and generates a better end result.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.c:main() relies on the value of errno being set by the last attempt to
execute the command. However, if something goes awry in handle_alias(),
that assumption is wrong. So restore errno before returning from
handle_alias().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the command execution by execv_git_cmd() fails with an errno
other than ENOENT, we used an uninitialized variable instead of
the string that holds the command name to report what failed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
