In builtin.h, there exists the distinctly lib-ish function
prune_packed_objects(). This function can currently only be called by
built-in commands but, unlike all of the other functions in the header,
it does not make sense to impose this restriction as the functionality
can be logically reused in libgit.
Extract this function into prune-packed.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin.h, there exists the distinctly "lib-ish" function
fmt_merge_msg(). This function can currently only be called by built-in
commands but, unlike most of the other functions in the header, it does
not make sense to impose this restriction as the functionality can be
logically reused in libgit.
Extract this function into fmt-merge-msg.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many += lists in the Makefile and, over time, they have gotten
slightly out of ASCII order. Sort all += lists to bring them back in
order.
ASCII sorting was chosen over strict alphabetical order even though, if
we omit file prefixes, the lists aren't sorted in strictly alphabetical
order (e.g. archive.o comes after archive-zip.o instead of before
archive-tar.o). This is intentional because the purpose of maintaining
the sorted list is to ensure line insertions are deterministic. By using
ASCII ordering, it is more easily mechanically reproducible in the
future, such as by using :sort in Vim.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the stash.useBuiltin setting which was added as an escape hatch
to disable the builtin version of stash first released with Git 2.22.
Carrying the legacy version is a maintenance burden, and has in fact
become out of date failing a test since the 2.23 release, without
anyone noticing until now. So users would be getting a hint to fall
back to a potentially buggy version of the tool.
We used to shell out to git config to get the useBuiltin configuration
to avoid changing any global state before spawning legacy-stash.
However that is no longer necessary, so just use the 'git_config'
function to get the setting instead.
Similar to what we've done in d03ebd411c ("rebase: remove the
rebase.useBuiltin setting", 2019-03-18), where we remove the
corresponding setting for rebase, we leave the documentation in place,
so people can refer back to it when searching for it online, and so we
can refer to it in the commit message.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently it's very easy for the advice library's callers to miss
checking the visibility step before printing an advice. Also, it makes
more sense for this step to be handled by the advice library.
Add a new advise_if_enabled function that checks the visibility of
advice messages before printing.
Add a new helper advise_enabled to check the visibility of the advice
if the caller needs to carry out complicated processing based on that
value.
A list of advice_settings is added to cache the config variables names
and values, it's intended to replace advice_config[] and the global
variables once we migrate all the callers to use the new APIs.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
Work around test breakages caused by custom regex engine used in
libasan, when address sanitizer is used with more recent versions
of gcc and clang.
* jk/asan-build-fix:
Makefile: use compat regex with SANITIZE=address
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around test breakages caused by custom regex engine used in
libasan, when address sanitizer is used with more recent versions
of gcc and clang.
* jk/asan-build-fix:
Makefile: use compat regex with SANITIZE=address
Recent versions of the gcc and clang Address Sanitizer produce test
failures related to regexec(). This triggers with gcc-10 and clang-8
(but not gcc-9 nor clang-7). Running:
make CC=gcc-10 SANITIZE=address test
results in failures in t4018, t3206, and t4062.
The cause seems to be that when built with ASan, we use a different
version of regexec() than normal. And this version doesn't understand
the REG_STARTEND flag. Here's my evidence supporting that.
The failure in t4062 is an ASan warning:
expecting success of 4062.2 '-G matches':
git diff --name-only -G "^(0{64}){64}$" HEAD^ >out &&
test 4096-zeroes.txt = "$(cat out)"
=================================================================
==672994==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7fa76f672000 at pc 0x7fa7726f75b6 bp 0x7ffe41bdda70 sp 0x7ffe41bdd220
READ of size 4097 at 0x7fa76f672000 thread T0
#0 0x7fa7726f75b5 (/lib/x86_64-linux-gnu/libasan.so.6+0x4f5b5)
#1 0x562ae0c9c40e in regexec_buf /home/peff/compile/git/git-compat-util.h:1117
#2 0x562ae0c9c40e in diff_grep /home/peff/compile/git/diffcore-pickaxe.c:52
#3 0x562ae0c9cc28 in pickaxe_match /home/peff/compile/git/diffcore-pickaxe.c:166
[...]
In this case we're looking in a buffer which was mmap'd via
reuse_worktree_file(), and whose size is 4096 bytes. But libasan's
regex tries to look at byte 4097 anyway! If we tweak Git like this:
diff --git a/diff.c b/diff.c
index 8e2914c031..cfae60c120 100644
--- a/diff.c
+++ b/diff.c
@@ -3880,7 +3880,7 @@ static int reuse_worktree_file(struct index_state *istate,
*/
if (ce_uptodate(ce) ||
(!lstat(name, &st) && !ie_match_stat(istate, ce, &st, 0)))
- return 1;
+ return 0;
return 0;
}
to use a regular buffer (with a trailing NUL) instead of an mmap, then
the complaint goes away.
The other failures are actually diff output with an incorrect funcname
header. If I instrument xdiff to show the funcname matching like so:
diff --git a/xdiff-interface.c b/xdiff-interface.c
index 8509f9ea22..f6c3dc1986 100644
--- a/xdiff-interface.c
+++ b/xdiff-interface.c
@@ -197,6 +197,7 @@ struct ff_regs {
struct ff_reg {
regex_t re;
int negate;
+ char *printable;
} *array;
};
@@ -218,7 +219,12 @@ static long ff_regexp(const char *line, long len,
for (i = 0; i < regs->nr; i++) {
struct ff_reg *reg = regs->array + i;
- if (!regexec_buf(®->re, line, len, 2, pmatch, 0)) {
+ int ret = regexec_buf(®->re, line, len, 2, pmatch, 0);
+ warning("regexec %s:\n regex: %s\n buf: %.*s",
+ ret == 0 ? "matched" : "did not match",
+ reg->printable,
+ (int)len, line);
+ if (!ret) {
if (reg->negate)
return -1;
break;
@@ -264,6 +270,7 @@ void xdiff_set_find_func(xdemitconf_t *xecfg, const char *value, int cflags)
expression = value;
if (regcomp(®->re, expression, cflags))
die("Invalid regexp to look for hunk header: %s", expression);
+ reg->printable = xstrdup(expression);
free(buffer);
value = ep + 1;
}
then when compiling with ASan and gcc-10, running the diff from t4018.66
produces this:
$ git diff -U1 cpp-skip-access-specifiers
warning: regexec did not match:
regex: ^[ ]*[A-Za-z_][A-Za-z_0-9]*:[[:space:]]*($|/[/*])
buf: private:
warning: regexec matched:
regex: ^((::[[:space:]]*)?[A-Za-z_].*)$
buf: private:
diff --git a/cpp-skip-access-specifiers b/cpp-skip-access-specifiers
index 4d4a9db..ebd6f42 100644
--- a/cpp-skip-access-specifiers
+++ b/cpp-skip-access-specifiers
@@ -6,3 +6,3 @@ private:
void DoSomething();
int ChangeMe;
};
void DoSomething();
- int ChangeMe;
+ int IWasChanged;
};
That first regex should match (and is negated, so it should be telling
us _not_ to match "private:"). But it wouldn't if regexec() is looking
at the whole buffer, and not just the length-limited line we've fed to
regexec_buf(). So this is consistent again with REG_STARTEND being
ignored.
The correct output (compiling without ASan, or gcc-9 with Asan) looks
like this:
warning: regexec matched:
regex: ^[ ]*[A-Za-z_][A-Za-z_0-9]*:[[:space:]]*($|/[/*])
buf: private:
[...more lines that we end up not using...]
warning: regexec matched:
regex: ^((::[[:space:]]*)?[A-Za-z_].*)$
buf: class RIGHT : public Baseclass
diff --git a/cpp-skip-access-specifiers b/cpp-skip-access-specifiers
index 4d4a9db..ebd6f42 100644
--- a/cpp-skip-access-specifiers
+++ b/cpp-skip-access-specifiers
@@ -6,3 +6,3 @@ class RIGHT : public Baseclass
void DoSomething();
- int ChangeMe;
+ int IWasChanged;
};
So it really does seem like libasan's regex engine is ignoring
REG_STARTEND. We should be able to work around it by compiling with
NO_REGEX, which would use our local regexec(). But to make matters even
more interesting, this isn't enough by itself.
Because ASan has support from the compiler, it doesn't seem to intercept
our call to regexec() at the dynamic library level. It actually
recognizes when we are compiling a call to regexec() and replaces it
with ASan-specific code at that point. And unlike most of our other
compat code, where we might have git_mmap() or similar, the actual
symbol name in the compiled compat/regex code is regexec(). So just
compiling with NO_REGEX isn't enough; we still end up in libasan!
We can work around that by having the preprocessor replace regexec with
git_regexec (both in the callers and in the actual implementation), and
we truly end up with a call to our custom regex code, even when
compiling with ASan. That's probably a good thing to do anyway, as it
means anybody looking at the symbols later (e.g., in a debugger) would
have a better indication of which function is which. So we'll do the
same for the other common regex functions (even though just regexec() is
enough to fix this ASan problem).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, `parse_pathspec_file()` was tested indirectly by invoking
git commands with properly crafted inputs. As demonstrated by the
previous bugfix, testing complicated black boxes indirectly can lead to
tests that silently test the wrong thing.
Introduce direct tests for `parse_pathspec_file()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effort to move "git-add--interactive" to C continues.
* js/add-p-in-c:
built-in add -p: show helpful hint when nothing can be staged
built-in add -p: only show the applicable parts of the help text
built-in add -p: implement the 'q' ("quit") command
built-in add -p: implement the '/' ("search regex") command
built-in add -p: implement the 'g' ("goto") command
built-in add -p: implement hunk editing
strbuf: add a helper function to call the editor "on an strbuf"
built-in add -p: coalesce hunks after splitting them
built-in add -p: implement the hunk splitting feature
built-in add -p: show different prompts for mode changes and deletions
built-in app -p: allow selecting a mode change as a "hunk"
built-in add -p: handle deleted empty files
built-in add -p: support multi-file diffs
built-in add -p: offer a helpful error message when hunk navigation failed
built-in add -p: color the prompt and the help text
built-in add -p: adjust hunk headers as needed
built-in add -p: show colored hunks by default
built-in add -i: wire up the new C code for the `patch` command
built-in add -i: start implementing the `patch` functionality in C
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
Correct unintentional duplication(s) of words, such as "the the",
and "can can" etc.
The changes are only applied to cases where it's fixing what is clearly
wrong or prone to misunderstanding, as suggested by the reviewers.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ryenus <ryenus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ebb7baf0 ("Makefile: add a hdr-check target", 2018-09-19)
implemented hdr-check target, it wanted to leave some header files
exempt from the stricter check the target implements, and added
GEN_HDRS macro.
This however is probably a bad move for two reasons:
- If we value the header cleanliness check, we eventually want to
teach our header generating scripts to produce clean headers.
Keeping the blanket "generated headers can be left as dirty as we
want" exception does not nudge us in the right direction.
- There is a list of generated header files, GENERATED_H, which is
used to keep track of dependencies. Presence of GEN_HDRS that is
too similarly named would confuse developers who are adding new
generated header files which list to add theirs.
- Even though unicode-width.h could be generated using a contrib/
script, as far as our build infrastructure is concerned, it is a
source file that is tracked in the source control system. Its
presence in GEN_HDRS list is doubly misleading.
Get rid of GEN_HDRS, which is used only once to list the headers we
do not run hdr-check test on, and instead explicitly list that the
ones, either tracked or generated, that we exempt from the test.
This allows GENERATED_H to be the sole "here are build artifact
header files that are expendable" list, so use it in the clean
target to $(RM) them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous steps, we re-implemented the main loop of `git add -i`
in C, and most of the commands.
Notably, we left out the actual functionality of `patch`, as the
relevant code makes up more than half of `git-add--interactive.perl`,
and is actually pretty independent of the rest of the commands.
With this commit, we start to tackle that `patch` part. For better
separation of concerns, we keep the code in a separate file,
`add-patch.c`. The new code is still guarded behind the
`add.interactive.useBuiltin` config setting, and for the moment,
it can only be called via `git add -p`.
The actual functionality follows the original implementation of
5cde71d64a (git-add --interactive, 2006-12-10), but not too closely
(for example, we use string offsets rather than copying strings around,
and after seeing whether the `k` and `j` commands are applicable, in the
C version we remember which previous/next hunk was undecided, and use it
rather than looking again when the user asked to jump).
As a further deviation from that commit, We also use a comma instead of
a slash to separate the available commands in the prompt, as the current
version of the Perl script does this, and we also add a line about the
question mark ("print help") to the help text.
While it is tempting to use this conversion of `git add -p` as an excuse
to work on `apply_all_patches()` so that it does _not_ want to read a
file from `stdin` or from a file, but accepts, say, an `strbuf` instead,
we will refrain from this particular rabbit hole at this stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of rewriting "git add -i" in C.
* js/builtin-add-i:
built-in add -i: implement the `help` command
built-in add -i: use color in the main loop
built-in add -i: support `?` (prompt help)
built-in add -i: show unique prefixes of the commands
built-in add -i: implement the main loop
built-in add -i: color the header in the `status` command
built-in add -i: implement the `status` command
diff: export diffstat interface
Start to implement a built-in version of `git add --interactive`
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike previous conversions to C, where we started with a built-in
helper, we start this conversion by adding an interception in the
`run_add_interactive()` function when the new opt-in
`add.interactive.useBuiltin` config knob is turned on (or the
corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and
calling the new internal API function `run_add_i()` that is implemented
directly in libgit.a.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet. In subsequent patches/patch series, the
`run_add_i()` function will gain more and more functionality, until it
is feature complete. The whole arc of the conversion can be found in the
PRs #170-175 at https://github.com/gitgitgadget/git.
The "--helper approach" can unfortunately not be used here: on Windows
we face the very specific problem that a `system()` call in
Perl seems to close `stdin` in the parent process when the spawned
process consumes even one character from `stdin`. Which prevents us from
implementing the main loop in C and still trying to hand off to the Perl
script.
The very real downside of the approach we have to take here is that the
test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the
conversion is complete (the `--helper` approach would have let it pass,
even at each of the incremental conversion steps).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI updates.
* js/azure-pipelines-msvc:
ci: also build and test with MS Visual Studio on Azure Pipelines
ci: really use shallow clones on Azure Pipelines
tests: let --immediate and --write-junit-xml play well together
test-tool run-command: learn to run (parts of) the testsuite
vcxproj: include more generated files
vcxproj: only copy `git-remote-http.exe` once it was built
msvc: work around a bug in GetEnvironmentVariable()
msvc: handle DEVELOPER=1
msvc: ignore some libraries when linking
compat/win32/path-utils.h: add #include guards
winansi: use FLEX_ARRAY to avoid compiler warning
msvc: avoid using minus operator on unsigned types
push: do not pretend to return `int` from `die_push_simple()`
When the %.cocci.patch target was defined in 63f0a758a0 (add coccicheck
make target, 2016-09-15), it included a mechanism to suppress the noisy
output, similar to the $(QUIET_<x>) family of variables.
In the case where one wants to inspect the output hidden by
$(QUIET_<x>), one could define $(V) for verbose output. In the
%.cocci.patch target, this was not implemented.
Move the output suppression into the $(QUIET_SPATCH) variable which is
used like the other $(QUIET_<x>) variables. While we're at it, change
the number of spaces printed from 5 to 4, like the other variables
there.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rename detection logic sorts a list of rename source candidates
by similarity to pick the best candidate, which means that a tie
between sources with the same similarity is broken by the original
location in the original candidate list (which is sorted by path).
Force the sorting by similarity done with a stable sort, which is
not promised by system supplied qsort(3), to ensure consistent
results across platforms.
* js/diff-rename-force-stable-sort:
diffcore_rename(): use a stable sort
Move git_sort(), a stable sort, into into libgit.a
Dev support.
* dl/honor-cflags-in-hdr-check:
ci: run `hdr-check` as part of the `Static Analysis` job
Makefile: emulate compile in $(HCO) target better
pack-bitmap.h: remove magic number
promisor-remote.h: include missing header
apply.h: include missing header
Coccinelle checks are done on more source files than before now.
* dl/cocci-everywhere:
Makefile: run coccicheck on more source files
Makefile: strip leading ./ in $(FIND_SOURCE_FILES)
Makefile: define THIRD_PARTY_SOURCES
Makefile: strip leading ./ in $(LIB_H)
... because we can, now. Technically, we actually build using `MSBuild`,
which is however pretty close to building interactively in Visual
Studio.
As there is no convenient way to run Git's test suite in Visual Studio,
we unpack a Portable Git to run it, using the just-added test helper to
allow running test scripts in parallel.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `qsort()` function is not guaranteed to be stable, i.e. it does not
promise to maintain the order of items it is told to consider equal. In
contrast, the `git_sort()` function we carry in `compat/qsort.c` _is_
stable, by virtue of implementing a merge sort algorithm.
In preparation for using a stable sort in Git's rename detection, move
the stable sort into `libgit.a` so that it is compiled in
unconditionally, and rename it to `git_stable_qsort()`.
Note: this also makes the hack obsolete that was introduced in
fe21c6b285 (mingw: reencode environment variables on the fly (UTF-16
<-> UTF-8), 2018-10-30), where we included `compat/qsort.c` directly in
`compat/mingw.c` to use the stable sort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when testing headers using `make hdr-check`, headers are
directly compiled. Although this seems to test the headers, this is too
strict since we treat the headers as C sources. As a result, this will
cause warnings to appear that would otherwise not, such as a static
variable definition intended for later use throwing a unused variable
warning.
In addition, on platforms that can run `make hdr-check` but require
custom flags, this target was failing because none of them were being
passed to the compiler. For example, on MacOS, the NO_OPENSSL flag was
being set but it was not being passed into compiler so the check was
failing.
Fix these problems by emulating the compile process better, including
test compiling dummy *.hcc C sources generated from the *.h files and
passing $(ALL_CFLAGS) into the compiler for the $(HCO) target so that
these custom flags can be used.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
Before, when running the "coccicheck" target, only the source files
which were being compiled would have been checked by Coccinelle.
However, just because we aren't compiling a source file doesn't mean we
have to exclude it from analysis. This will allow us to catch more
mistakes, in particular ones that affect Windows-only sources since
Coccinelle currently runs only on Linux.
Make the "coccicheck" target run on all C sources except for those that
are taken from some third-party source. We don't want to patch these
files since we want them to be as close to upstream as possible so that
it'll be easier to pull in upstream updates.
When running a build on Arch Linux with no additional flags provided,
after applying this patch, the following sources are now checked:
* block-sha1/sha1.c
* compat/access.c
* compat/basename.c
* compat/fileno.c
* compat/gmtime.c
* compat/hstrerror.c
* compat/memmem.c
* compat/mingw.c
* compat/mkdir.c
* compat/mkdtemp.c
* compat/mmap.c
* compat/msvc.c
* compat/pread.c
* compat/precompose_utf8.c
* compat/qsort.c
* compat/setenv.c
* compat/sha1-chunked.c
* compat/snprintf.c
* compat/stat.c
* compat/strcasestr.c
* compat/strdup.c
* compat/strtoimax.c
* compat/strtoumax.c
* compat/unsetenv.c
* compat/win32/dirent.c
* compat/win32/path-utils.c
* compat/win32/pthread.c
* compat/win32/syslog.c
* compat/win32/trace2_win32_process_info.c
* compat/win32mmap.c
* compat/winansi.c
* ppc/sha1.c
This also results in the following source now being excluded:
* compat/obstack.c
Instead of generating $(FOUND_C_SOURCES) from a
`$(shell $(FIND_SOURCE_FILES))` invocation, an alternative design was
considered which involved converting $(FIND_SOURCE_FILES) into
$(SOURCE_FILES) which would hold a list of filenames from the
$(FIND_SOURCE_FILES) invocation. We would simply filter `%.c` files into
$(ALL_C_SOURCES). $(SOURCE_FILES) would then be passed directly to the
etags, ctags and cscope commands. We can see from the following
invocation
$ git ls-files '*.[hcS]' '*.sh' ':!*[tp][0-9][0-9][0-9][0-9]*' ':!contrib' | wc -c
12779
that the number of characters in this list would pose a problem on
platforms with short command-line length limits (such as CMD which has a
max of 8191 characters). As a result, we don't perform this change.
However, we can see that the same issue may apply when running
Coccinelle since $(COCCI_SOURCES) is also a list of filenames:
if ! echo $(COCCI_SOURCES) | xargs $$limit \
$(SPATCH) --sp-file $< $(SPATCH_FLAGS) \
>$@+ 2>$@.log; \
This is justified since platforms that support Coccinelle generally have
reasonably long command-line length limits and so we are safe for the
foreseeable future.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, $(FIND_SOURCE_FILES) has two modes: if `git ls-files` is
present, it will use that to enumerate the files in the repository; else
it will use `$(FIND) .` to enumerate the files in the directory.
There is a subtle difference between these two methods, however. With
ls-files, filenames don't have a leading `./` while with $(FIND), they
do. This does not currently pose a problem but in a future patch, we
will be using `filter-out` to process the list of files with the
assumption that there is no prefix.
Unify the two possible invocations in $(FIND_SOURCE_FILES) by using sed
to remove the `./` prefix in the $(FIND) case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some files in our codebase are borrowed from other projects, and
minimally updated to suit our own needs. We'd sometimes need to tell
our own sources and these third-party sources apart for management
purposes (e.g. we may want to be less strict about coding style and
other issues on third-party files).
Define the $(MAKE) variable THIRD_PARTY_SOURCES that can be used to
match names of third-party sources.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'progress.c' has seen a few fixes recently [1], and, unfortunately,
some of those fixes required further fixes [2]. It seems it's time to
have a few tests focusing on the subtleties of the progress display.
Add the 'test-tool progress' subcommand to help testing the progress
display, reading instructions from standard input and turning them
into calls to the display_progress() and display_throughput()
functions with the given parameters.
The progress display is, however, critically dependent on timing,
because it's only updated once every second or, if the toal is known
in advance, every 1%, and there is the throughput rate as well. These
make the progress display far too undeterministic for testing as-is.
To address this, add a few testing-specific variables and functions to
'progress.c', allowing the the new test helper to:
- Disable the triggered-every-second SIGALRM and set the
'progress_update' flag explicitly based in the input instructions.
This way the progress line will be updated deterministically when
the test wants it to be updated.
- Specify the time elapsed since start_progress() to make the
throughput rate calculations deterministic.
Add the new test script 't0500-progress-display.sh' to check a few
simple cases with and without throughput, and that a shorter progress
line properly covers up the previously displayed line in different
situations.
[1] See commits 545dc345eb (progress: break too long progress bar
lines, 2019-04-12) and 9f1fd84e15 (progress: clear previous
progress update dynamically, 2019-04-12).
[2] 1aed1a5f25 (progress: avoid empty line when breaking the progress
line, 2019-05-19)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, $(LIB_H) is generated from two modes: if `git ls-files` is
present, it will use that to enumerate the files in the repository; else
it will use `$(FIND) .` to enumerate the files in the directory.
There is a subtle difference between these two methods, however. With
ls-files, filenames don't have a leading `./` while with $(FIND), they
do. This results in $(CHK_HDRS) having to substitute out the leading
`./` before it uses $(LIB_H).
Unify the two possible values in $(LIB_H) by using patsubst to remove the
`./` prefix at its definition.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
e87de7cab4 ("grep: un-break building with PCRE < 8.32", 2017-05-25)
added a restriction for JIT support that is no longer needed after
pcre_jit_exec() calls were removed.
Reorganize the definitions in grep.h so that JIT support could be
detected early and NO_LIBPCRE1_JIT could be used reliably to enforce
JIT doesn't get used.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few important config settings that are not loaded
during git_default_config. These are instead loaded on-demand.
Centralize these config options to a single scan, and store
all of the values in a repo_settings struct. The values for
each setting are initialized as negative to indicate "unset".
This centralization will be particularly important in a later
change to introduce "meta" config settings that change the
defaults for these config settings.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support building Git with Visual Studio
The bits about .git/branches/* have been dropped from the series.
We may want to drop the support for it, but until that happens, the
tests should rely on the existence of the support to pass.
* js/visual-studio: (23 commits)
git: avoid calling aliased builtins via their dashed form
bin-wrappers: append `.exe` to target paths if necessary
.gitignore: ignore Visual Studio's temporary/generated files
.gitignore: touch up the entries regarding Visual Studio
vcxproj: also link-or-copy builtins
msvc: add a Makefile target to pre-generate the Visual Studio solution
contrib/buildsystems: add a backend for modern Visual Studio versions
contrib/buildsystems: handle options starting with a slash
contrib/buildsystems: also handle -lexpat
contrib/buildsystems: handle libiconv, too
contrib/buildsystems: handle the curl library option
contrib/buildsystems: error out on unknown option
contrib/buildsystems: optionally capture the dry-run in a file
contrib/buildsystems: redirect errors of the dry run into a log file
contrib/buildsystems: ignore gettext stuff
contrib/buildsystems: handle quoted spaces in filenames
contrib/buildsystems: fix misleading error message
contrib/buildsystems: ignore irrelevant files in Generators/
contrib/buildsystems: ignore invalidcontinue.obj
Vcproj.pm: urlencode '<' and '>' when generating VC projects
...
When compiling with Visual Studio, the projects' names are identical to
the executables modulo the extensions. Read: there will exist both a
directory called `git` as well as an executable called `git.exe` in the
end. Which means that the bin-wrappers *need* to target the `.exe` files
lest they try to execute directories.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the dir-iterator API and apply it to the local clone
optimization codepath.
* mt/dir-iterator-updates:
clone: replace strcmp by fspathcmp
clone: use dir-iterator to avoid explicit dir traversal
clone: extract function from copy_or_link_directory
clone: copy hidden paths at local clone
dir-iterator: add flags parameter to dir_iterator_begin
dir-iterator: refactor state machine model
dir-iterator: use warning_errno when possible
dir-iterator: add tests for dir-iterator API
clone: better handle symlinked files at .git/objects/
clone: test for our behavior on odd objects/* content
Many GIT_TEST_* environment variables control various aspects of
how our tests are run, but a few followed "non-empty is true, empty
or unset is false" while others followed the usual "there are a few
ways to spell true, like yes, on, etc., and also ways to spell
false, like no, off, etc." convention.
* ab/test-env:
env--helper: mark a file-local symbol as static
tests: make GIT_TEST_FAIL_PREREQS a boolean
tests: replace test_tristate with "git env--helper"
tests README: re-flow a previously changed paragraph
tests: make GIT_TEST_GETTEXT_POISON a boolean
t6040 test: stop using global "script" variable
config.c: refactor die_bad_number() to not call gettext() early
env--helper: new undocumented builtin wrapping git_env_*()
config tests: simplify include cycle test
Extend the test coverage a bit.
* cc/test-oidmap:
t0016: add 'remove' subcommand test
test-oidmap: remove 'add' subcommand
test-hashmap: remove 'hash' command
oidmap: use sha1hash() instead of static hash() function
t: add t0016-oidmap.sh
t/helper: add test-oidmap.c
Create t/helper/test-dir-iterator.c, which prints relevant information
about a directory tree iterated over with dir-iterator.
Create t/t0066-dir-iterator.sh, which tests that dir-iterator does
iterate through a whole directory tree as expected.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
[matheus.bernardino: update to use test-tool and some minor aesthetics]
Helped-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support to build with MSVC has been updated.
* jh/msvc:
msvc: ignore .dll and incremental compile output
msvc: avoid debug assertion windows in Debug Mode
msvc: do not pretend to support all signals
msvc: add pragmas for common warnings
msvc: add a compile-time flag to allow detailed heap debugging
msvc: support building Git using MS Visual C++
msvc: update Makefile to allow for spaces in the compiler path
msvc: fix detect_msys_tty()
msvc: define ftello()
msvc: do not re-declare the timespec struct
msvc: mark a variable as non-const
msvc: define O_ACCMODE
msvc: include sigset_t definition
msvc: fix dependencies of compat/msvc.c
mingw: replace mingw_startup() hack
obstack: fix compiler warning
cache-tree/blame: avoid reusing the DEBUG constant
t0001 (mingw): do not expect a specific order of stdout/stderr
Mark .bat files as requiring CR/LF endings
mingw: fix a typo in the msysGit-specific section
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
As fetch_objects() is now used only in promisor-remote.c
and should't be used outside it, let's move it into
promisor-remote.c, make it static there, and remove
fetch-object.{c,h}.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The promisor-remote.{c,h} files will contain functions to
manage many promisor remotes.
We expect that there will not be a lot of promisor remotes,
so it is ok to use a simple linked list to manage them.
Helped-by: Jeff King <peff@peff.net>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, Git can be built using the Microsoft toolchain, via:
make MSVC=1 [DEBUG=1]
Third party libraries are built from source using the open source
"vcpkg" tool set. See https://github.com/Microsoft/vcpkg
On a first build, the vcpkg tools and the third party libraries are
automatically downloaded and built. DLLs for the third party libraries
are copied to the top-level (and t/helper) directory to facilitate
debugging. See compat/vcbuild/README.
A series of .bat files are invoked by the Makefile to find the location
of the installed version of Visual Studio and the associated compiler
tools (essentially replicating the environment setup performed by a
"Developer Command Prompt"). This should find the most recent VS2015 or
VS2017 installation. Output from these scripts are used by the Makefile
to define compiler and linker pathnames and -I and -L arguments.
The build produces .pdb files for both debug and release builds.
Note: This commit was squashed from an organic series of commits
developed between 2016 and 2018 in Git for Windows' `master` branch.
This combined commit eliminates the obsolete commits related to fetching
NuGet packages for third party libraries. It is difficult to use NuGet
packages for C/C++ sources because they may be built by earlier versions
of the MSVC compiler and have CRT version and linking issues.
Additionally, the C/C++ NuGet packages that we were using tended to not
be updated concurrently with the sources. And in the case of cURL and
OpenSSL, this could expose us to security issues.
Helped-by: Yue Lin Ho <b8732003@student.nsysu.edu.tw>
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have many GIT_TEST_* variables that accept a <boolean> because
they're implemented in C, and then some that take <non-empty?> because
they're implemented at least partially in shellscript.
Add a helper that wraps git_env_bool() and git_env_ulong() as the
first step in fixing this. This isn't being added as a test-tool mode
because some of these are used outside the test suite.
Part of what this tool does can be done via a trick with "git config"
added in 83d842dc8c ("tests: turn on network daemon tests by default",
2014-02-10) for test_tristate(), i.e.:
git -c magic.variable="$1" config --bool magic.variable 2>/dev/null
But as subsequent changes will show being able to pass along the
default value makes all the difference, and we'll be able to replace
test_tristate() itself with that.
The --type=bool option will be used by subsequent patches, but not
--type=ulong. I figured it was easy enough to add it & test for it so
I left it in so we'd have wrappers for both git_env_*() functions, and
to have a template to make it obvious how we'd add --type=int etc. if
it's needed in the future.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is quite common that MS Visual C++ is installed into a location whose
path contains spaces, therefore we need to quote it.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new helper is very similar to "test-hashmap.c" and will help
test how `struct oidmap` from oidmap.{c,h} can be used.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way of specifying the path to find dynamic libraries at runtime
has been simplified. The old default to pass -R/path/to/dir has been
replaced with the new default to pass -Wl,-rpath,/path/to/dir,
which is the more recent GCC uses. Those who need to build with an
old GCC can still use "CC_LD_DYNPATH=-R"
* ab/deprecate-R-for-dynpath:
Makefile: remove the NO_R_TO_GCC_LINKER flag
Update supporting parts of "git rebase" to remove code that should
no longer be used.
* js/rebase-cleanup:
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
Optionally "make coccicheck" can feed multiple source files to
spatch, gaining performance while spending more memory.
* jk/cocci-batch:
coccicheck: make batch size of 0 mean "unlimited"
coccicheck: optionally batch spatch invocations
Change our default CC_LD_DYNPATH invocation to something GCC likes
these days. Since the GCC 4.6 release unknown flags haven't been
passed through to ld(1). Thus our previous default of CC_LD_DYNPATH=-R
would cause an error on modern GCC unless NO_R_TO_GCC_LINKER was set.
This CC_LD_DYNPATH flag is really obscure, and I don't expect anyone
except those working on git development ever use this.
It's not needed to simply link to libraries like say libpcre,
but *only* for those cases where we're linking to such a library not
present in the OS's library directories. See e.g. ldconfig(8) on Linux
for more details.
I use this to compile my git with a LIBPCREDIR=$HOME/g/pcre2/inst as
I'm building that from source, but someone maintaining an OS package
is almost certainly not going to use this. They're just going to set
USE_LIBPCRE=YesPlease after installing the libpcre dependency,
which'll point to OS libraries which ld(1) will find without the help
of CC_LD_DYNPATH.
Another thing that helps mitigate any potential breakage is that we
detect the right type of invocation in configure.ac, which e.g. HP/UX
uses[1], as does IBM's AIX package[2]. From what I can tell both AIX
and Solaris packagers are building git with GCC, so I'm not adding a
corresponding config.mak.uname default to cater to their OS-native
linkers.
Now for an overview of past development in this area:
Our use of "-R" dates back to 455a7f3275 ("More portability.",
2005-09-30). Soon after that in bbfc63dd78 ("gcc does not necessarily
pass runtime libpath with -R", 2006-12-27) the NO_R_TO_GCC flag was
added, allowing optional use of "-Wl,-rpath=".
Then in f5b904db6b ("Makefile: Allow CC_LD_DYNPATH to be overriden",
2008-08-16) the ability to override this flag to something else
entirely was added, as some linkers use neither "-Wl,-rpath," nor
"-R".
From what I can tell we should, with the benefit of hindsight, have
made this change back in 2006. GCC & ld supported this type of
invocation back then, or since at least binutils-gdb.git's[3]
a1ad915dc4 ("[...]Add support for -rpath[...]", 1994-07-20).
Further reading and prior art can be found at [4][5][6][7]. Making a
plain "-R" an error seems from reading those reports to have been
introduced in GCC 4.6 released on March 25, 2011[8], but I couldn't
confirm this with absolute certainty, its release notes are ambiguous
on the subject, and I couldn't be bothered to try to build & bisect it
against GCC 4.5.
1. https://public-inbox.org/git/20190516093412.14795-1-avarab@gmail.com/
2. https://www.ibm.com/developerworks/aix/library/aix-toolbox/alpha.html
3. git://sourceware.org/git/binutils-gdb.git
4. https://github.com/tsuna/boost.m4/issues/15
5. https://bugzilla.gnome.org/show_bug.cgi?id=641416
6. https://stackoverflow.com/questions/12629042/g-4-6-real-error-unrecognized-option-r
7. https://curl.haxx.se/mail/archive-2014-11/0005.html
8. https://gcc.gnu.org/gcc-4.6/changes.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only remaining scripted part of `git rebase` is the
`--preserve-merges` backend. Meaning: there is little reason to keep the
"library of common rebase functions" as a separate file.
While moving the functions to `git-rebase--preserve-merges.sh`, we also
drop the `move_to_original_branch` function that is no longer used.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 21853626ea (built-in rebase: call `git am` directly, 2019-01-18),
the built-in rebase already uses the built-in `git am` directly.
Now that d03ebd411c (rebase: remove the rebase.useBuiltin setting,
2019-03-18) even removed the scripted rebase, there is no longer any
user of `git-rebase--am.sh`, so let's just remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Workaround for standard-compliant but less-than-useful behaviour of
access(2) for the root user.
* cc/access-on-aix-workaround:
git-compat-util: work around for access(X_OK) under root
The internal implementation of "git rebase -i" has been updated to
avoid forking a separate "rebase--interactive" process.
* pw/rebase-i-internal:
rebase -i: run without forking rebase--interactive
rebase: use a common action enum
rebase -i: use struct rebase_options in do_interactive_rebase()
rebase -i: use struct rebase_options to parse args
rebase -i: use struct object_id for squash_onto
rebase -i: use struct commit when parsing options
rebase -i: remove duplication
rebase -i: combine rebase--interactive.c with rebase.c
rebase: use OPT_RERERE_AUTOUPDATE()
rebase: rename write_basic_state()
rebase: don't translate trace strings
sequencer: always discard index after checkout
A "ls-files" that emulates "find" to enumerate files in the working
tree resulted in duplicated Makefile rules that caused the build to
issue an unnecessary warning during a trial build after merge
conflicts are resolved in working tree *.h files but before the
resolved results are added to the index. This has been corrected.
* jc/make-dedup-ls-files-output:
Makefile: dedup list of files obtained from ls-files
Polishing of the new trace2 facility continues. The system-level
configuration can specify site-wide trace2 settings, which can be
overridden with per-user configuration and environment variables.
* jh/trace2-sid-fix:
trace2: fixup access problem on /etc/gitconfig in read_very_early_config
trace2: update docs to describe system/global config settings
trace2: make SIDs more unique
trace2: clarify UTC datetime formatting
trace2: report peak memory usage of the process
trace2: use system/global config for default trace2 settings
config: add read_very_early_config()
trace2: find exec-dir before trace2 initialization
trace2: add absolute elapsed time to start event
trace2: refactor setting process starting time
config: initialize opts structure in repo_read_config()
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
If you have the memory to handle it, the ideal case is to run a single
spatch invocation with all of the source files. But the only way to do
so now is to pick an arbitrarily large batch size. Let's make "0" do
this, which is a little friendlier (and doesn't otherwise have a useful
meaning).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our "make coccicheck" rule, we currently feed each source file to its
own individual invocation of spatch. This has a few downsides:
- it repeats any overhead spatch has for starting up and reading the
patch file
- any included header files may get processed from multiple
invocations. This is slow (we see the same header files multiple
times) and may produce a resulting patch with repeated hunks (which
cannot be applied without further cleanup)
Ideally we'd just invoke a single instance of spatch per rule-file and
feed it all source files. But spatch can be rather memory hungry when
run in this way. I measured the peak RSS going from ~90MB for a single
file to ~1900MB for all files. Multiplied by multiple rule files being
processed at the same time (for "make -j"), this can make things slower
or even cause them to fail (e.g., this is reported to happen on our
Travis builds).
Instead, let's provide a tunable knob. We'll leave the default at "1",
but it can be cranked up to "999" for maximum CPU/memory tradeoff, or
people can find points in between that serve their particular machines.
Here are a few numbers running a single rule via:
SIZES='1 4 16 999'
RULE=contrib/coccinelle/object_id.cocci
for i in $SIZES; do
make clean
/usr/bin/time -o $i.out --format='%e | %U | %S | %M' \
make $RULE.patch SPATCH_BATCH_SIZE=$i
done
for i in $SIZES; do
printf '%4d | %s\n' $i "$(cat $i.out)"
done
which yields:
1 | 97.73 | 93.38 | 4.33 | 100128
4 | 52.80 | 51.14 | 1.69 | 135204
16 | 35.82 | 35.09 | 0.76 | 284124
999 | 23.30 | 23.13 | 0.20 | 1903852
The implementation is done with xargs, which should be widely available;
it's in POSIX, we rely on it already in the test suite. And "coccicheck"
is really a developer-only tool anyway, so it's not a big deal if
obscure systems can't run it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On AIX, access(X_OK) may succeed when run as root even if the
execution isn't possible. This behavior is allowed by POSIX
which says:
... for a process with appropriate privileges, an implementation
may indicate success for X_OK even if execute permission is not
granted to any user.
It can lead hook programs to have their execution refused:
git commit -m content
fatal: cannot exec '.git/hooks/pre-commit': Permission denied
Add NEED_ACCESS_ROOT_HANDLER in order to use an access helper function.
It checks with stat if any executable flags is set when the current user
is root.
Signed-off-by: Clément Chigot <clement.chigot@atos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 33533975 ("Makefile: ask "ls-files" to list source files if
available", 2011-10-18), we optionally asked "ls-files" to list the
source files that ought to exist, as a faster approximation for
"find" on working tree files.
This works reasonably well, except that it ends up listing the same
path multiple times if the index is unmerged. Because the original
use of this construct was to name files to run etags over, and the
etags command happily takes the same filename multiple times without
causing any harm, there was no problem (other than perhaps spending
slightly more cycles, but who cares how fast the TAGS file gets
updated).
We however recently added a similar call to "ls-files" to list *.h
files, instead of using "find", in 92b88eba ("Makefile: use `git
ls-files` to list header files, if possible", 2019-03-04). In this
new use of "ls-files", the resulting list $(LIB_H) is used for,
among other things, generating the header files to run hdr-check
target, and the duplicate unfortunately becomes a true problem. It
causes $(MAKE) to notice that there are multiple %.hco targets and
complain.
Let the resulting list consumed by $(sort), which deduplicates,
to fix this.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dev support update.
* js/check-docs-exe:
check-docs: fix for setups where executables have an extension
check-docs: do not expect guide pages to correspond to commands
check-docs: really look at the documented commands again
docs: do not document the `git remote-testgit` command
docs: move gitremote-helpers into section 7
"git stash" rewritten in C.
* ps/stash-in-c: (28 commits)
tests: add a special setup where stash.useBuiltin is off
stash: optionally use the scripted version again
stash: add back the original, scripted `git stash`
stash: convert `stash--helper.c` into `stash.c`
stash: replace all `write-tree` child processes with API calls
stash: optimize `get_untracked_files()` and `check_changes()`
stash: convert save to builtin
stash: make push -q quiet
stash: convert push to builtin
stash: convert create to builtin
stash: convert store to builtin
stash: convert show to builtin
stash: convert list to builtin
stash: convert pop to builtin
stash: convert branch to builtin
stash: convert drop and clear to builtin
stash: convert apply to builtin
stash: mention options in `show` synopsis
stash: add tests for `git stash show` config
stash: rename test cases to be more descriptive
...
In order to run `rebase -i` without forking `rebase--interactive` it
will be convenient to have all the code from rebase--interactive.c in
rebase.c. This is a straight forward copy of the code from
rebase--interactive.c, it will be simplified slightly in the next
commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git serve` built-in was introduced in ed10cb952d (serve:
introduce git-serve, 2018-03-15) as a backend to serve Git protocol v2,
probably originally intended to be spawned by `git upload-pack`.
However, in the version that the protocol v2 patches made it into core
Git, `git upload-pack` calls the `serve()` function directly instead of
spawning `git serve`; The only reason in life for `git serve` to survive
as a built-in command is to provide a way to test the protocol v2
functionality.
Meaning that it does not even have to be a built-in that is installed
with end-user facing Git installations, but it can be a test helper
instead.
Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the recent years, there has been a big push to convert more and more
of Git's commands that are implemented as scripts to built-ins written
in pure, portable C, for robustness, speed and portability.
One strategy that served us well is to convert those scripts
incrementally, starting by renaming the scripts to
`git-legacy-<command>`, then introducing a built-in that does nothing
else at first than checking the config setting `<command>.useBuiltin`
(which defaults to `false` at the outset) and handing off to the legacy
script if so asked.
Obviously, those `git-legacy-<command>` commands share the documentation
with the built-in `git-<command>`, and are not intended to be called
directly anyway. So let's not try to ensure that they are documented
separately from their built-in versions.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building with certain build options, some commands are excluded
from the build. For example, `git-credential-cache` is skipped when
building with `NO_UNIX_SOCKETS`.
Let's not build or package documentation for those excluded commands.
This issue was pointed out rightfully when running `make check-docs` on
Windows, where we do not yet have Unix sockets, and therefore the
`credential-cache` command is excluded (yet its documentation was built
and shipped).
Note: building the documentation via `make -C Documentation` leaves the
build system with no way to determine which commands have been
excluded. If called thusly, we gracefully fail to exclude their
documentation. Only when building the documentation via the top-level
Makefile will it get excluded properly, or after building
`Documentation/GIT-EXCLUDED-PROGRAMS` manually.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among other things, the `check-docs` target ensures that
`command-list.txt` no longer contains commands that were dropped (or
that were never added in the first place).
To do so, it compares the list of commands from that file to the
commands listed in `$(ALL_COMMANDS)`.
However, some build options exclude commands from the latter. Fix the
target to handle this situation correctly by taking the just-introduced
`$(EXCLUDED_PROGRAMS)` into account.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When built with NO_CURL or with NO_UNIX_SOCKETS, some commands are
skipped from the build. It does not make sense to list them in the
output of `git help -a`, so let's just not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last user was just removed; There is no longer any need to carry it
around. Should we ever run into a need for it again, it is easy enough
to revert this commit.
It is unlikely, though, that we need `NO_INSTALL` again: as we saw with
the just-removed item, `git-remote-testgit`, we have better locations
to put executables and scripts that we do not want to install, e.g.
a subdirectory in `t/`, or `contrib/`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to read the system and global config files for
default Trace2 settings. This allows system-wide Trace2 settings to
be installed and inherited to make it easier to manage a collection of
systems.
The original GIT_TR2* environment variables are loaded afterwards and
can be used to override the system settings.
Only the system and global config files are used. Repo and worktree
local config files are ignored. Likewise, the "-c" command line
arguments are also ignored. These limits are for performance reasons.
(1) For users not using Trace2, there should be minimal overhead to
detect that Trace2 is not enabled. In particular, Trace2 should not
allocate lots of otherwise unused data strucutres.
(2) For accurate performance measurements, Trace2 should be initialized
as early in the git process as possible, and before most of the normal
git process initialization (which involves discovering the .git directory
and reading a hierarchy of config files).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git-remote-testgit` script is really only used in
`t5801-remote-helpers.sh`. It does not even contain any `@@<MAGIC>@@`
placeholders that would need to be interpolated via `make
git-remote-testgit`.
Let's just move it to a new home, decluttering the top-level directory
and clarifying that this is just a test helper, not an official Git
command that we would want to ever support.
Suggested by Ævar Arnfjörð Bjarmason.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, for example, executables (must) have the extension `.exe`.
Our `check-docs` target was not prepared for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to see what commands are listed in `command-list.txt` but
not installed, we currently include lines that refer to guides, e.g.
`gitattributes` or `gitcli`.
Let's not include those lines, as they are not referring to commands.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the `check-docs` target, we verify that commands that are
documented are actually in the current list of commands to be built.
However, this logic broke in 5fafce0b78 (check-docs: get documented
command list from Makefile, 2012-08-08), when we tried to make the logic
safer by not looking at the files in the worktree, but at the list of
files to be generated in `Documentation/Makefile`. While this was the
right thing to do, it failed to accommodate for the fact that `make -C
Documentation/ print-man1`, unlike `ls Documentation/*.txt`, would *not*
print lines starting with the prefix `Documentation/`.
At long last, let's fix this.
Note: This went undetected due to a funny side effect of the
`ALL_PROGRAMS` variable starting with a space. That space, together with
the extra space we inserted before `$(ALL_PROGRAMS)` in the
case " $(ALL_PROGRAMS)" in
*" $$cmd ")
[...]
construct, is responsible that this case arm is used when `cmd` is empty
(which was clearly not intended to be the case).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CFLAGS now can be tweaked when invoking Make while using
DEVELOPER=YesPlease; this did not work well before.
* ab/makefile-help-devs-more:
Makefile: allow for combining DEVELOPER=1 and CFLAGS="..."
Makefile: move the setting of *FLAGS closer to "include"
Makefile: Move *_LIBS assignment into its own section
Makefile: add/remove comments at top and tweak whitespace
Makefile: move "strip" assignment down from flags
Makefile: remove an out-of-date comment
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sha1dc library uses unaligned loads on platforms that support them.
This is normally what you'd want for performance, but it does cause
UBSan to complain when we compile with SANITIZE=undefined. Just like we
set -DNO_UNALIGNED_LOADS for our own code in that case, we should set
-DSHA1DC_FORCE_ALIGNED_ACCESS.
Of course that does nothing without pulling in the patches from sha1dc
to respect that define. So let's do that, too, updating both the
submodule link and our in-tree copy (from the same commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile uses 'find' utility to enumerate all the *.h header
files, which is expensive on platforms with slow filesystems; it
now optionally uses "ls-files" if working within a repository,
which is a trick similar to how all sources are enumerated to run
ETAGS on.
* js/find-lib-h-with-ls-files-when-possible:
Makefile: use `git ls-files` to list header files, if possible
The set of header files used by "make hdr-check" unconditionally
included sha256/gcrypt.h, even when it is not used, causing the
make target to fail. We now skip it when GCRYPT_SHA256 is not in
use.
* rj/hdr-check-gcrypt-fix:
Makefile: fix 'hdr-check' when GCRYPT not installed
We recently converted the `git stash` command from Unix shell scripts
to builtins.
Let's end users a way out when they discover a bug in the
builtin command: `stash.useBuiltin`.
As the file name `git-stash` is already in use, let's rename the
scripted backend to `git-legacy-stash`.
To make the test suite pass with `stash.useBuiltin=false`, this commit
also backports rudimentary support for `-q` (but only *just* enough
to appease the test suite), and adds a super-ugly hack to force exit
code 129 for `git stash -h`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old shell script `git-stash.sh` was removed and replaced
entirely by `builtin/stash.c`. In order to do that, `create` and
`push` were adapted to work without `stash.sh`. For example, before
this commit, `git stash create` called `git stash--helper create
--message "$*"`. If it called `git stash--helper create "$@"`, then
some of these changes wouldn't have been necessary.
This commit also removes the word `helper` since now stash is
called directly and not by a shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a builtin helper for performing stash commands. Converting
all at once proved hard to review, so starting with just apply
lets conversion get started without the other commands being
finished.
The helper is being implemented as a drop in replacement for
stash so that when it is complete it can simply be renamed and
the shell script deleted.
Delete the contents of the apply_stash shell function and replace
it with a call to stash--helper apply until pop is also
converted.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the GCRYPT_SHA256 build variable is not set, then the 'hdr-check'
target complains about the missing <gcrypt.h> header file. Add the
'sha256/gcrypt.h' header file to the exception list, if the build
variable is not defined. While here, replace the 'xdiff%' filter
pattern with 'xdiff/%' (and similarly for the compat pattern) since
the original pattern inadvertently excluded the 'xdiff-interface.h'
header.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d85b0dff72 (Makefile: use `find` to determine static header
dependencies, 2014-08-25), we switched from a static list of header
files to a dynamically-generated one, asking `find` to enumerate them.
Back in those days, we did not use `$(LIB_H)` by default, and many a
`make` implementation seems smart enough not to run that `find` command
in that case, so it was deemed okay to run `find` for special targets
requiring this macro.
However, as of ebb7baf02f (Makefile: add a hdr-check target,
2018-09-19), $(LIB_H) is part of a global rule and therefore must be
expanded. Meaning: this `find` command has to be run upon every
`make` invocation. In the presence of many a worktree, this can tax the
developers' patience quite a bit.
Even in the absence of worktrees or other untracked files and
directories, the cost of I/O to generate that list of header files is
simply a lot larger than a simple `git ls-files` call.
Therefore, just like in 335339758c (Makefile: ask "ls-files" to list
source files if available, 2011-10-18), we now prefer to use `git
ls-files` to enumerate the header files to enumerating them via `find`,
falling back to the latter if the former failed (which would be the case
e.g. in a worktree that was extracted from a source .tar file rather
than from a clone of Git's sources).
This has one notable consequence: we no longer include `command-list.h`
in `LIB_H`, as it is a generated file, not a tracked one, but that is
easily worked around. Of the three sites that use `LIB_H`, two
(`LOCALIZED_C` and `CHK_HDRS`) already handle generated headers
separately. In the third, the computed-dependency fallback, we can just
add in a reference to $(GENERATED_H).
Likewise, we no longer include not-yet-tracked header files in `LIB_H`.
Given the speed improvements, these consequences seem a comparably small
price to pay.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the DEVELOPER=1 facility introduced there's been no way to
have custom CFLAGS (e.g. CFLAGS="-O0 -g -ggdb3") while still
benefiting from the set of warnings and assertions DEVELOPER=1
enables.
This is because the semantics of variables in the Makefile are such
that the user setting CFLAGS overrides anything we set, including what
we're doing in config.mak.dev[1].
So let's introduce a "DEVELOPER_CFLAGS" variable in config.mak.dev and
add it to ALL_CFLAGS. Before this the ALL_CFLAGS variable
would (basically, there's some nuance we won't go into) be set to:
$(CPPFLAGS) [$(CFLAGS) *or* $(CFLAGS) in config.mak.dev] $(BASIC_CFLAGS) $(EXTRA_CPPFLAGS)
But will now be:
$(DEVELOPER_CFLAGS) $(CPPFLAGS) $(CFLAGS) $(BASIC_CFLAGS) $(EXTRA_CPPFLAGS)
The reason for putting DEVELOPER_CFLAGS first is to allow for
selectively overriding something DEVELOPER=1 brings in. On both GCC
and Clang later settings override earlier ones. E.g. "-Wextra
-Wno-extra" will enable no "extra" warnings, but not if those two
arguments are reversed.
Examples of things that weren't possible before, but are now:
# Use -O0 instead of -O2 for less painful debuggng
DEVELOPER=1 CFLAGS="-O0 -g"
# DEVELOPER=1 plus -Wextra, but disable some of the warnings
DEVELOPER=1 DEVOPTS="no-error extra-all" CFLAGS="-O0 -g -Wno-unused-parameter"
The reason for the patches leading up to this one re-arranged the
various *FLAGS assignments and includes is just for readability. The
Makefile supports assignments out of order, e.g.:
$ cat Makefile
X = $(A) $(B) $(C)
A = A
B = B
include c.mak
all:
@echo $(X)
$ cat c.mak
C=C
$ make
A B C
So we could have gotten away with the much smaller change of changing
"CFLAGS" in config.mak.dev to "DEVELOPER_CFLAGS" and adding that to
ALL_CFLAGS earlier in the Makefile "before" the config.mak.*
includes. But I think it's more readable to use variables "after"
they're included.
1. https://www.gnu.org/software/make/manual/html_node/Overriding.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the setting of variables like CFLAGS down past settings like
"prefix" and default programs like "TAR" to just before we do the
include from "config.mak.*".
There's no functional changes here yet, but move note that
"ALL_CFLAGS" and "ALL_LDFLAGS" are moved below the include. A
follow-up change will tweak those depending on a variable set in
config.mak.dev.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
