Allow setting the path of asciidoc in only one place when creating
the documentation.
Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the alias expansion is prefixed with an exclamation point, treat
it as a shell command which is run using system(3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The way 'git pull' without explicit parameters work were not
explained well in any existing documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
tar archive frontend for fast-import.
Correct spelling of fast-import in docs.
Correct some language in fast-import documentation.
Correct ^0 asciidoc syntax in fast-import docs.
It makes "git reflog [show]" act as
git log -g --pretty=oneline --abbrev-cmit
and is fairly straightforward. So you can just write
git reflog
or
git reflog show
and it will show you the reflog in a nice format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -C[NUM] to git-am and git-rebase so that patches can be applied even
if context has changed a bit.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its spelled 'fast-import', not 'gfi'. Linus and Dscho have both
recently pointed this out to me on the mailing list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Minor documentation improvements, as suggested on the Git mailing
list by Horst H. von Brand and Karl Hasselström.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I wrote this documentation with asciidoc 7.1.2, but apparently
asciidoc 8 assumes ^ means superscript. The solution was already
documented in rev-parse's manpage and is to use {caret} instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'master' of git://repo.or.cz/git/fastimport:
Add a Tips and Tricks section to fast-import's manual.
Don't crash fast-import if the marks cannot be exported.
Dump all refs and marks during a checkpoint in fast-import.
Teach fast-import how to sit quietly in the corner.
Teach fast-import how to clear the internal branch content.
Minor timestamp related documentation corrections for fast-import.
There has been some informative lessons learned in the gfi user
community, and these really should be written down and documented
for future generations of frontend developers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the frontend asks us to checkpoint (via the explicit checkpoint
command) its probably because they are afraid the current import
will crash/fail/whatever and want to make sure they can pickup from
the last checkpoint. To do that sort of recovery, we will need the
current tip of every branch and tag available at the next startup.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Often users will be running fast-import from within a larger frontend
process, and this may be a frequent periodic tool such as a future
edition of `git-svn fetch`. We don't want to bombard users with our
large stats output if they won't be interested in it, so `--quiet`
is now an option to make gfi be more silent.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some frontends may not be able to (easily) keep track of which files
are included in the branch, and which aren't. Performing this
tracking can be tedious and error prone for the frontend to do,
especially if its foreign data source cannot supply the changed
path list on a per-commit basis.
fast-import now allows a frontend to request that a branch's tree
be wiped clean (reset to the empty tree) at the start of a commit,
allowing the frontend to feed in all paths which belong on the branch.
This is ideal for a tar-file importer frontend, for example, as
the frontend just needs to reformat the tar data stream into a gfi
data stream, which may be something a few Perl regexps can take
care of. :)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As discussed on the mailing list, the documentation used here was
not quite accurate. Improve upon it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'master' of git://repo.or.cz/git/fastimport: (81 commits)
S_IFLNK != 0140000
Don't do non-fastforward updates in fast-import.
Support RFC 2822 date parsing in fast-import.
Minor fast-import documentation corrections.
Remove unnecessary null pointer checks in fast-import.
Correct fast-import timezone documentation.
Correct minor style issue in fast-import.
Correct compiler warnings in fast-import.
Remove --branch-log from fast-import.
Initial draft of fast-import documentation.
Don't support shell-quoted refnames in fast-import.
Reduce memory usage of fast-import.
Include checkpoint command in the BNF.
Accept 'inline' file data in fast-import commit structure.
Reduce value duplication in t9300-fast-import.
Create test case for fast-import.
Support delimited data regions in fast-import.
Remove unnecessary options from fast-import.
Use fixed-size integers when writing out the index in fast-import.
Always use struct pack_header for pack header in fast-import.
...
If fast-import is being used to update an existing branch of
a repository, the user may not want to lose commits if another
process updates the same ref at the same time. For example, the
user might be using fast-import to make just one or two commits
against a live branch.
We now perform a fast-forward check during the ref updating process.
If updating a branch would cause commits in that branch to be lost,
we skip over it and display the new SHA1 to standard error.
This new default behavior can be overridden with `--force`, like
git-push and git-fetch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since some frontends may be working with source material where
the dates are only readily available as RFC 2822 strings, it is
more friendly if fast-import exposes Git's parse_date() function
to handle the conversion. This way the frontend doesn't need
to perform the parsing itself.
The new --date-format option to fast-import can be used by a
frontend to select which format it will supply date strings in.
The default is the standard `raw` Git format, which fast-import
has always supported. Format rfc2822 can be used to activate the
parse_date() function instead.
Because fast-import could also be useful for creating new, current
commits, the format `now` is also supported to generate the current
system timestamp. The implementation of `now` is a trivial call
to datestamp(), but is actually a whole whopping 3 lines so that
fast-import can verify the frontend really meant `now`.
As part of this change I have added validation of the `raw` date
format. Prior to this change fast-import would accept anything
in a `committer` command, even if it was seriously malformed.
Now fast-import requires the '> ' near the end of the string and
verifies the timestamp is formatted properly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Corrected a couple of header markup lines which were shorter than the
actual header, and made the `data` commands two formats into a named
list, which matches how we document the two formats of the `M` command
within a commit.
Also tried to simplify the language about our decimal integer format;
Linus pointed out I was probably being too specific at the cost of
reduced readability.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Andy Parkins and Linus Torvalds both noticed that the description
of the timezone was incorrect. Its not expressed in minutes.
Its more like "hhmm", where "hh" is the number of hours and "mm"
is the number of minutes shifted from GMT/UTC.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The --branch-log option and its associated code hasn't been used in
several months, as its not really very useful for debugging fast-import
or a frontend. I don't plan on supporting it in this state long-term,
so I'm killing it now before it gets distributed to a wider audience.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a first pass at the manpage for git-fast-import.
I have tried to cover the input format in extreme detail, creating a
reference which is more detailed than the BNF grammar appearing in
the header of fast-import.c. I have also covered some details about
gfi's performance and memory utilization, as well as the average
learning curve required to create a gfi frontend application (as it
is far lower than it might appear on first glance).
The documentation still lacks real example input streams, which may
turn out to be difficult to format in asciidoc due to the blank lines
which carry meaning within the format.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This can be used to compress multiple changesets into one, for example
like
git cvsexportcommit -P cvshead mybranch
without having to do so in git first.
Signed-off-by: Simon 'corecode' Schubert <corecode@fs.ei.tum.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
hg-to-git.py is able to convert a Mercurial repository into a git one,
and preserves the branches in the process (unlike tailor)
hg-to-git.py can probably be greatly improved (it's a rather crude
combination of shell and python) but it does already work quite well for
me. Features:
- supports incremental conversion
(for keeping a git repo in sync with a hg one)
- supports hg branches
- converts hg tags
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This particular use of git-rebase to remove a single commit or a
range of commits from the history of a branch recently came up on
the mailing list. Documenting the example should help other users
arrive at the same solution on their own.
It also was not obvious to the newcomer that git-rebase is able to
accept any commit for --onto <newbase> and <upstream>. We should
at least minimally document this, as much of the language in
git-rebase's manpage refers to 'branch' rather than 'committish'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation for git-for-each-ref said that the refname variable
would return "the part after $GIT_DIR/refs/", which isn't true.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* np/dreflog:
show-branch -g: default to the current branch.
Let git-checkout always drop any detached head
Enable HEAD@{...} and make it independent from the current branch
scan reflogs independently from refs
add reflog when moving HEAD to a new branch
create_symref(): do not assume pathname from git_path() persists long enough
add logref support to git-symbolic-ref
move create_symref() past log_ref_write()
add reflog entries for HEAD when detached
enable separate reflog for HEAD
lock_ref_sha1_basic(): remember the original name of a ref when resolving it
make reflog filename independent from struct ref_lock
Mention git-revert as an alternative to git-reset to revert changes.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now we have a separate reflog on HEAD, show-branch -g without an explicit
parameter defaults to the current branch, or HEAD when it is detached
from branches.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to resolve conflicts early in preparation for possible
inclusion of "reflog on detached HEAD" series by Nico, as having
it in 1.5.0 would really help us remove confusion between
detached and attached states.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski pointed out the positional notation in git-remote's
documentation was very confusing, especially now that we have 3
supported subcommands. Instead of referring to subcommands by
position, refer to them by name.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I was reading the tutorial and noticed that we say this:
Also, don't use "git reset" on a publicly-visible branch that
other developers pull from, as git will be confused by history
that disappears in this way.
I do not think this is a good explanation. For example, if we
do this:
(1) I build a series and push it out.
---o---o---o---j
(2) Alice clones from me, and builds two commits on top of it.
---o---o---o---j---a---a
(3) I rewind one and build a few, and push them out.
---o---o---o...j
\
h---h---h---h
(4) Alice pulls from me again:
---o---o---o---j---a---a---*
\ /
h---h---h---h
Contrary to the description, git will happily have Alice merge
between the two branches, and never gets confused.
Maybe I did not want to have 'j' because it was an incomplete
solution to some problem, and Alice may have fixed it up with
her changes, while I abandoned that approach I started with 'j',
and worked on something completely unrelated in the four 'h'
commits. In such a case, the merge Alice would make would be
very sensible, and after she makes the merge if I pull from her,
the world will be perfect. I started something with 'j' and
dropped the ball, Alice picked it up and perfected it while I
went on to work on something else with 'h'. This would be a
perfect example of distributed parallel collaboration. There is
nothing confused about it.
The case the rewinding becomes problematic is if the work done
in 'h' tries to solve the same problem as 'j' tried to solve in
a different way. Then the merge forced on Alice would make her
pick between my previous attempt with her fixups (j+a) and my
second attempt (h). If 'a' commits were to fix up what 'j'
started, presumably Alice already studied and knows enough about
the problem so she should be able to make an informed decision
to pick between what 'j+a' and 'h' do.
A lot worse case is if Alice's work is not at all related to
what 'j' wanted to do (she did not mean to pick up from where I
left off -- she just wanted to work on something different).
Then she would not be familiar enough with what 'j' and 'h'
tried to achieve, and I'd be forcing her to pick between the
two. Of course if she can make the right decision, then again
that is a perfect example of distributed collaboration, but that
does not change the fact that I'd be forcing her to clean up my
mess.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The default post-commit hook is actually empty; it is the update hook
that sends an email. This patch corrects hooks.txt to reflect that.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since it can be annoying to manually cleanup 40 tracking branches
which were removed by the remote system, 'git remote prune <n>'
can now be used to delete any tracking branches under <n> which
are no longer available on the remote system.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Those new messages are certainly nice, but there might be cases where
they are simply unwelcome, like when git-commit is used within scripts.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not seem to need it either and gives an error on FC5 I use
at kernel.org to cut documentation tarballs, so remove it in the
meantime.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is in the hope of giving JBF's user-manual wider exposure.
I am not very happy with trailing whitespaces in the new
document, but let's not worry too much about the formatting
issues for now, but concentrate more on the structure and the
contents.
I'd like complete gitweb setup instructions some day, but for now just
refer to the gitweb README.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Document Junio's show-branch trick for finding out which tags are
descendents of a given comit.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I still really want a section on interoperability with CVS, subversion,
etc., but I'm not getting around to it very fast, so just add this to
the TODO section for now. And a few other minor todo updates.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Add a brief discussion of reflogs. Also recovery of dangling commits
seems to fit in here, so move some of the discussion out of Linus's
email to here.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Direct editing of config files may be more natural for users than using
the git-config commandline; but we should still reference the
git-config man page when we describe such editing, so people know where
to go for details on the config file syntax and meanings of the
variables.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Looks like we're going to allow git-config as the preferred alias to
git-repo-config, so let's document that instead.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Initial import of fsck and dangling objects discussion, mostly lifted from
an email from Linus.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Love it or hate it, some people actually still program in Tcl. Some
of those programs are meant for interfacing with Git. Programs such as
gitk and git-gui. It may be useful to have Tcl-safe output available
from for-each-ref, just like shell, Perl and Python already enjoy.
Thanks to Sergey Vlasov for pointing out the horrible flaws in the
first and second version of this patch, and steering me in the right
direction for Tcl value quoting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* The description of valid colour specifications was rather
incomplete, so fix it so that it actually describes colour specs as
accepted by color_parse().
* The list of colour items allowed in color.diff.BLAH was missing the
`commit' and `whitespace' entries.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I did this:
$ git tag -s test-sign
gpg: skipped "Andy Parkins <andyparkins@gmail.com>": secret key not available
gpg: signing failed: secret key not available
failed to sign the tag with GPG.
The problem is that I have used the comment field in my key's UID
definition.
$ gpg --list-keys andy
pub 1024D/4F712F6D 2003-08-14
uid Andy Parkins (Google) <andyparkins@gmail.com>
So when git-tag looks for "Andy Parkins <andyparkins@gmail.com>";
obviously it's not going to be found.
There shouldn't be a requirement that I use the same form of my name in
my git repository and my gpg key - I might want to be formal (Andrew) in
my gpg key and informal (Andy) in the repository. Further I might have
multiple keys in my keyring, and might want to use one that doesn't
match up with the address I use in commit messages.
This patch adds a configuration entry "user.signingkey" which, if
present, will be passed to the "-u" switch for gpg, allowing the tag
signing key to be overridden. If the entry is not present, the fallback
is the original method, which means existing behaviour will continue
untouched.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Keep git remote discussion in the first chapter, but postpone
lower-level git fetch usage (to fetch individual branches) till later.
Import a bunch of slightly modified text from the readme to give an
architectural overview at the end.
Add more discussion of history rewriting.
And a bunch of other miscellaneous changes....
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Document the recommended way to prime a repository with tons of
references with 'pack-refs --all -prune'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces the config item remote.<name>.uploadpack to override the
default value (which is "git-upload-pack").
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows transfer.unpackLimit to specify what these two
configuration variables want to set.
We would probably want to deprecate the two separate variables,
as I do not see much point in specifying them independently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes git-fetch over git native protocol to automatically
decide to keep the downloaded pack if the fetch results in more
than 100 objects, just like receive-pack invoked by git-push
does. This logic is disabled when --keep is explicitly given
from the command line, so that a very small clone still keeps
the downloaded pack as before.
The 100 threshold can be adjusted with fetch.unpacklimit
configuration. We might want to introduce transfer.unpacklimit
to consolidate the two unpacklimit variables, which will be a
topic for the next patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just some option name disambiguation. This is the counter part to
commit d23842fd which made a similar change for push and send-pack.
--exec continues to work.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to get the following confusing error message:
$ git commit --amend -a -m foo
Option -m cannot be combined with -c/-C/-F
This is because --amend cannot be combined with -c/-C/-F, which makes
sense, because they try to handle the same log message in different ways.
So update the documentation to reflect this.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Contrary to variable values, in subsection names parsing character
escape codes (besides literal escaping of " as \", and \ as \\)
is not performed; subsection name cannot contain newlines.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A short-hand "-g" for "git log --walk-reflogs" and "git
show-branch --reflog" makes it easier to access the reflog
info.
[jc: added -g to show-branch for symmetry]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Separate part of Documentation/config.txt which deals with git config file
syntax into "Syntax" subsection, and expand it. Add information about
subsections, boolean values, escaping and escape sequences in string
values, and continuing variable value on the next line.
Add also proxy settings to config file example to show example of
partially enclosed in double quotes string value.
Parts based on comments by Junio C Hamano, Johannes Schindelin,
config.c, and the smb.conf(5) man page.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-prune is not safe when run uncontrolled in parallel while
other git operations are creating new objects. To avoid
mistakes, do not run git-prune by default from git-gc.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 9b088c4e39.
Protecting 'mature' objects does not make it any safer. We should
admit that git-prune is inherently unsafe when run in parallel with
other operations without involving unwarranted locking overhead,
and with the latest git, even rebase and reset would not immediately
create crufts anyway.
Marco Candrian noticed that one cat-file example refers to a
blob object that is never used in the example sequence.
The bug is interesting in that the output from the botched
sample command is consistent with the incorrect blob object
name ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
It appears git-gc will no longer prune automatically, so we don't
need to tell people not to do other stuff while running it.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Since references may be packed, it's no longer as helpful to
introduce references as paths relative to .git.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The option --reverse reverses the order of the commits.
[jc: with comments on rev_info.reverse from Simon 'corecode' Schubert.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This option gives grace period to objects that are unreachable
from the refs from getting pruned.
The default value is 24 hours and may be changed using
gc.prunegrace.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
