This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Git interally has the facility to differentiate between
porcelain and plubmbing commands and appropriately print errors,
several shell scripts invoke plubming commands triggering cryptic
plumbing errors to be displayed on a porcelain interface. This patch
replaces the "needs update" message in git-pull and git-rebase, when
`git update-index` is run, with a more friendly message.
Reported-by: Joshua Jensen <jjensen@workspacewhiz.com>
Reported-by: Thore Husfeldt <thore.husfeldt@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to c85c792 (pull --rebase: be cleverer with rebased upstream
branches, 2008-01-26), pull --rebase would run
git rebase $merge_head
which resulted in a call to
git format-patch ... --ignore-if-in-upstream $merge_head..$cur_branch
This resulted in patches from $merge_head..$cur_branch being applied, as
long as they did not already exist in $cur_branch..$merge_head.
Unfortunately, when upstream is rebased, $merge_head..$cur_branch also
refers to "old" commits that have already been rebased upstream, meaning
that many patches that were already fixed upstream would be reapplied.
This could result in many spurious conflicts, as well as reintroduce
patches that were intentionally dropped upstream.
So the algorithm was changed in c85c792 (pull --rebase: be cleverer with
rebased upstream branches, 2008-01-26) and d44e712 (pull: support rebased
upstream + fetch + pull --rebase, 2009-07-19). Defining $old_remote_ref to
be the most recent entry in the reflog for @{upstream} that is an ancestor
of $cur_branch, pull --rebase was changed to run
git rebase --onto $merge_head $old_remote_ref
which results in a call to
git format-patch ... --ignore-if-in-upstream $old_remote_ref..$cur_branch
The whole point of this change was to reduce the number of commits being
reapplied, by avoiding commits that upstream already has or had.
In the rebased upstream case, this change achieved that purpose. It is
worth noting, though, that since $old_remote_ref is always an ancestor of
$cur_branch (by its definition), format-patch will not know what upstream
is and thus will not be able to determine if any patches are already
upstream; they will all be reapplied.
In the non-rebased upstream case, this new form is usually the same as the
original code but in some cases $old_remote_ref can be an ancestor of
$(git merge-base $merge_head $cur_branch)
meaning that instead of avoiding reapplying commits that upstream already
has, it actually includes more such commits. Combined with the fact that
format-patch can no longer detect commits that are already upstream (since
it is no longer told what upstream is), results in lots of confusion for
users (e.g. "git is giving me lots of conflicts in stuff I didn't even
change since my last push.")
Cases where additional commits could be reapplied include forking from a
commit other than the tracking branch, or amending/rebasing after pushing.
Cases where the inability to detect upstreamed commits cause problems
include independent discovery of a fix and having your patches get
upstreamed by some alternative route (e.g. pulling your changes to a third
machine, pushing from there, and then going back to your original machine
and trying to pull --rebase).
Fix the non-rebased upstream case by ignoring $old_remote_ref whenever it
is contained in $(git merge-base $merge_head $cur_branch). This should
have no affect on the rebased upstream case.
Acked-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pull was never meant to take --dry-run at all. However, it
passes unknown arguments to git-fetch, which does do a
dry-run. Unfortunately, pull then attempts to merge whatever
cruft was in FETCH_HEAD (which the dry-run fetch will not
have written to).
Even though we never advertise --dry-run as something that
should work, it is still worth being defensive because:
1. Other commands (including fetch) take --dry-run, so a
user might try it.
2. Rather than simply producing an error, it actually
changes the repository in totally unexpected ways.
This patch makes "pull --dry-run" equivalent to "fetch
--dry-run".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.0.3
fetch: Fix minor memory leak
fetch: Future-proof initialization of a refspec on stack
fetch: Check for a "^{}" suffix with suffixcmp()
daemon: parse_host_and_port SIGSEGV if port is specified
Makefile: Fix CDPATH problem
pull: replace unnecessary sed invocation
Getting the shortened branch name is as easy as using the shell's
parameter expansion.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that in the documentation for git-pull, documentation for the
--progress option is displayed under the "Options related to fetching"
subtitle via fetch-options.txt.
Also, update the documentation of the -q/--quiet option for git-pull to
mention its effect on progress reporting during fetching.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14e5d40 (pull: Fix parsing of -X<option>, 2010-01-17) forgot that
merge_name needs to stay as a single non-interpolated string.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ap/merge-backend-opts:
Document that merge strategies can now take their own options
Extend merge-subtree tests to test -Xsubtree=dir.
Make "subtree" part more orthogonal to the rest of merge-recursive.
pull: Fix parsing of -X<option>
Teach git-pull to pass -X<option> to git-merge
git merge -X<option>
git-merge-file --ours, --theirs
Conflicts:
git-compat-util.h
As -X parameter can contain arbitrary $IFS characters, we need to
properly quote it from the shell while forming the command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This needs the usual sq then eval trick to allow IFS characters
in the option.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various commands refuse to run in the presence of conflicts (commit,
merge, pull, cherry-pick/revert). They all used to provide rough, and
inconsistant error messages.
A new variable advice.resolveconflict is introduced, and allows more
verbose messages, pointing the user to the appropriate solution.
For commit, the error message used to look like this:
$ git commit
foo.txt: needs merge
foo.txt: unmerged (c34a92682e0394bc0d6f4d4a67a8e2d32395c169)
foo.txt: unmerged (3afcd75de8de0bb5076942fcb17446be50451030)
foo.txt: unmerged (c9785d77b76dfe4fb038bf927ee518f6ae45ede4)
error: Error building trees
The "need merge" line is given by refresh_cache. We add the IN_PORCELAIN
option to make the output more consistant with the other porcelain
commands, and catch the error in return, to stop with a clean error
message. The next lines were displayed by a call to cache_tree_update(),
which is not reached anymore if we noticed the conflict.
The new output looks like:
U foo.txt
fatal: 'commit' is not possible because you have unmerged files.
Please, fix them up in the work tree, and then use 'git add/rm <file>' as
appropriate to mark resolution and make a commit, or use 'git commit -a'.
Pull is slightly modified to abort immediately if $GIT_DIR/MERGE_HEAD
exists instead of waiting for merge to complain.
The behavior of merge and the test-case are slightly modified to reflect
the usual flow: start with conflicts, fix them, and afterwards get rid of
MERGE_HEAD, with different error messages at each stage.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit c0ecb07048 "git-pull.sh:
Fix call to git-merge for new command format" and
commit b81e00a965 "git-merge: a deprecation
notice of the ancient command line syntax".
They caused a "git pull" (without any arguments, and without any local
commits---only to update to the other side) to warn that commit log
message is ignored because the merge resulted in a fast-forward.
Another possible solution is to add an extra option to "git merge" so that
"git pull" can tell it that the message given is not coming from the end
user (the canned message is passed just in case the merge resulted in a
non-ff and caused commit), but I think it is easier _not_ to deprecate the
old syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pull --rebase fails because it cannot find what branch to
merge against, the error message implies we are trying to merge.
Say "rebase against" instead of "merge with" to avoid confusion.
The configuration suggested to remedy the situation uses a
confusing syntax, with variables specified in the dotted form
accepted by 'git config' but separated from their values by the
'=' delimiter used by config files. Since the user will have to
edit this output anyway, it is more helpful to provide a config
file snippet to paste into an editor and modify.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now "git merge <msg> HEAD" is officially deprecated, we should
clean our own use as well.
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For convenience in scripts and aliases, add the option
--ff-only to only allow fast-forwards (and up-to-date,
despite the name).
Disallow combining --ff-only and --no-ff, since they
flatly contradict each other.
Allow all other options to be combined with --ff-only
(i.e. do not add any code to handle them specially),
including the following options:
* --strategy (one or more): As long as the chosen merge
strategy results in up-to-date or fast-forward, the
command will succeed.
* --squash: I cannot imagine why anyone would want to
squash commits only if fast-forward is possible, but I
also see no reason why it should not be allowed.
* --message: The message will always be ignored, but I see
no need to explicitly disallow providing a redundant message.
Acknowledgements: I did look at Yuval Kogman's earlier
patch (107768 in gmane), mainly as shortcut to find my
way in the code, but I did not copy anything directly.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several reasons a git-pull invocation might not
have anything marked for merge:
1. We're not on a branch, so there is no branch
configuration.
2. We're on a branch, but there is no configuration for
this branch.
3. We fetched from the configured remote, but the
configured branch to merge didn't get fetched (either
it doesn't exist, or wasn't part of the fetch refspec).
4. We fetched from the non-default remote, but didn't
specify a branch to merge. We can't use the configured
one because it applies to the default remote.
5. We fetched from a specified remote, and a refspec was
given, but it ended up not fetching anything (this is
actually hard to do; if the refspec points to a remote
branch and it doesn't exist, then fetch will fail and
we never make it to this code path. But if you provide
a wildcard refspec like
refs/bogus/*:refs/remotes/origin/*
then you can see this failure).
We have handled (1) and (2) for some time. Recently, commit
a6dbf88 added code to handle case (3).
This patch handles cases (4) and (5), which previously just
fell under other cases, producing a confusing message.
While we're at it, let's rewrap the text for case (3), which
looks terribly ugly as it is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when a74b170 (git-pull: disallow implicit merging to detached HEAD,
2007-01-15) added this check, $? referred to the error status of reading
HEAD as a symbolic-ref; but cd67e4d (Teach 'git pull' about --rebase,
2007-11-28) moved the command away from where the check is, and nobody
noticed the breakage. Ever since, $? has always been 0 (tr at the end of
the pipe to find merge_head never fails) and other case arms were never
reached.
These days, error_on_no_merge_candidates function is prepared to handle a
detached HEAD case, which was what the code this patch removes used to
handle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the remote branch we asked for merging did not exist in the set of
fetched refs, we unconditionally hinted that it was because of lack of
configuration. It is not necessarily so, and risks sending users for a
wild goose chase.
Make sure to check if that is indeed the case before telling a wild guess
to the user.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a "pull --rebase", we check to make sure that the index and
working tree are clean. The index-clean check compares the index against
HEAD. The test erroneously reports dirtiness if we don't have a HEAD yet.
In such an "unborn branch" case, by definition, a non-empty index won't
be based on whatever we are pulling down from the remote, and will lose
the local change. Just check if $GIT_DIR/index exists and error out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You cannot do a "git pull --rebase" with a rebased upstream, if you have
already run "git fetch". Try to behave as if the "git fetch" was not run.
In other words, find the fork point of the current branch, where
the tip of upstream branch used to be, and use it as the upstream
parameter of "git rebase".
This patch computes the fork point by walking the reflog to find the first
commit which is an ancestor of the current branch. Maybe there are
smarter ways to compute it, but this is a straight forward implementation.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/pull-rebase:
parse-remote: remove unused functions
parse-remote: support default reflist in get_remote_merge_branch
parse-remote: function to get the tracking branch to be merge
The only user of get_remote_refs_for_fetch was "git pull --rebase" and
it only wanted the tracking branch to be merge. So, add a simple
function (get_remote_merge_branch) with this new meaning.
No behavior changes. The new function behaves like the old code in
"git pull --rebase". In particular, it only works with the default
refspec mapping and with remote branches, not tags.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A minor fix that eliminates usage of "2>/dev/null" when --quiet or
-q has already been implemented.
Signed-off-by: Dan Loewenherz <daniel.loewenherz@yale.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, git complains about not finding a branch to pull from in
'branch..merge', which is hardly understandable. While we're there,
reword the sentences slightly.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Forwards the --stat, --no-stat, and --summary options on to git-rebase.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to provide multiple upstream branches to either
git pull --rebase, or to git rebase, so disallow both.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To support counting -q/-v options in git pull retain
them by concatenating.
Signed-off-by: Tuncer Ayaz <tuncer.ayaz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement git-pull --quiet and git-pull --verbose by
adding the options to git-pull and fixing verbosity
handling in git-fetch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some misguided documents floating on the Net suggest this sequence:
mkdir newdir && cd newdir
git init
git remote add origin $url
git pull origin master:master
"git pull" has known about misguided "pull" that lets the underlying fetch
update the current branch for a long time. It also has known about
"git pull origin master" into a branch yet to be born.
These two workarounds however were not aware of the existence of each
other and did not work well together. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a companion patch to 6848d58c(Ignore dirty submodule states
during rebase and stash).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing fails during "pull --rebase", you cannot just clean up the
working directory and call "pull --rebase" again, since the remote branch
was already fetched.
Therefore, die early when the working directory is dirty.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are the command line option equivalents of the 'merge.log' config
variable.
The patch also updates documentation and bash completion accordingly, and
adds a test.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option has the same effect as '--(no-)summary' (i.e. whether to
show a diffsat at the end of the merge or not), and it is consistent
with the '--stat' option of other git commands.
Documentation, tests, and bash completion are updaed accordingly, and the
old --summary option is marked as being deprected.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase supports --strategy, so pull should pass the option along to it.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the upstream branch is tracked, we can detect if that branch
was rebased since it was last fetched. Teach git to use that
information to rebase from the old remote head onto the new remote head.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git pull --tags" is run without any other arguments, the
standard error message "You told me to fetch and merge stuff but
there is nothing to merge! You might want to fix your config"
is given.
While the error may be technically correct, fixing the config
would not help, as "git pull --tags" itself tells "git fetch"
not to use the configured refspecs.
This commit makes "git pull --tags" to issue a different error
message to avoid confusion. This is merely an interim solution.
In the longer term, it would be a better approach to change the
semantics of --tags option to make "git fetch" and "git pull"
to:
(1) behave as if no --tags was given (so an explicit refspec on
the command line overrides configured ones, or no explicit
refspecs on the command line takes configured ones); but
(2) no auto-following of tags is made even when using
configured refspecs; and
(3) fetch all tags as not-for-merge entries".
Then we would not need to have this separate error message, as
the ordinary merge will happen even with the --tags option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling 'git pull' with the '--rebase' option, it performs a
fetch + rebase instead of a fetch + merge.
This behavior is more desirable than fetch + pull when a topic branch
is ready to be submitted and needs to be update.
fetch + rebase might also be considered a better workflow with shared
repositories in any case, or for contributors to a centrally managed
repository, such as WINE's.
As a convenience, you can set the default behavior for a branch by
defining the config variable branch.<name>.rebase, which is
interpreted as a bool. This setting can be overridden on the command
line by --rebase and --no-rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--text follows this line--
These commands currently lack OPTIONS_SPEC; allow people to
easily list with "git grep 'OPTIONS_SPEC=$'" what they can help
improving.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options are supported by git-merge, but git-pull didn't know about
them.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
