In order to enable hooks to be run as an external process, by a
standalone Git command, or by tools which wrap Git, provide an external
means to run all configured hook commands for a given hook event.
Most of our hooks require more complex functionality than this, but
let's start with the bare minimum required to support our simplest
hooks.
In terms of implementation the usage_with_options() and "goto usage"
pattern here mirrors that of
builtin/{commit-graph,multi-pack-index}.c.
Some of the implementation here, such as a function being named
run_hooks_opt() when it's tasked with running one hook, to using the
run_processes_parallel_tr2() API to run with jobs=1 is somewhere
between a bit odd and and an overkill for the current features of this
"hook run" command and the hook.[ch] API.
This code will eventually be able to run multiple hooks declared in
config in parallel, by starting out with these names and APIs we
reduce the later churn of renaming functions, switching from the
run_command() to run_processes_parallel_tr2() API etc.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cmd_tar_tree() function itself was removed in
925ceccf05 (tar-tree: remove deprecated command, 2013-11-10).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use multiple worker processes to distribute the queued entries and call
write_pc_item() in parallel for them. The items are distributed
uniformly in contiguous chunks. This minimizes the chances of two
workers writing to the same directory simultaneously, which could affect
performance due to lock contention in the kernel. Work stealing (or any
other format of re-distribution) is not implemented yet.
The protocol between the main process and the workers is quite simple.
They exchange binary messages packed in pkt-line format, and use
PKT-FLUSH to mark the end of input (from both sides). The main process
starts the communication by sending N pkt-lines, each corresponding to
an item that needs to be written. These packets contain all the
necessary information to load, smudge, and write the blob associated
with each item. Then it waits for the worker to send back N pkt-lines
containing the results for each item. The resulting packet must contain:
the identification number of the item that it refers to, the status of
the operation, and the lstat() data gathered after writing the file (iff
the operation was successful).
For now, checkout always uses a hardcoded value of 2 workers, only to
demonstrate that the parallel checkout framework correctly divides and
writes the queued entries. The next patch will add user configurations
and define a more reasonable default, based on tests with the said
settings.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
It can be helpful to store a list of repositories in global or system
config and then iterate Git commands on that list. Create a new builtin
that makes this process simple for experts. We will use this builtin to
run scheduled maintenance on all configured repositories in a future
change.
The test is very simple, but does highlight that the "--" argument is
optional.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'gc' builtin is our current entrypoint for automatically maintaining
a repository. This one tool does many operations, such as repacking the
repository, packing refs, and rewriting the commit-graph file. The name
implies it performs "garbage collection" which means several different
things, and some users may not want to use this operation that rewrites
the entire object database.
Create a new 'maintenance' builtin that will become a more general-
purpose command. To start, it will only support the 'run' subcommand,
but will later expand to add subcommands for scheduling maintenance in
the background.
For now, the 'maintenance' builtin is a thin shim over the 'gc' builtin.
In fact, the only option is the '--auto' toggle, which is handed
directly to the 'gc' builtin. The current change is isolated to this
simple operation to prevent more interesting logic from being lost in
all of the boilerplate of adding a new builtin.
Use existing builtin/gc.c file because we want to share code between the
two builtins. It is possible that we will have 'maintenance' replace the
'gc' builtin entirely at some point, leaving 'git gc' as an alias for
some specific arguments to 'git maintenance run'.
Create a new test_subcommand helper that allows us to test if a certain
subcommand was run. It requires storing the GIT_TRACE2_EVENT logs in a
file. A negation mode is available that will be used in later tests.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason that git-fast-import benefits from being a separate
binary. And as it links against libgit.a, it has a non-trivial disk
footprint. Let's make it a builtin, which reduces the size of a stripped
installation from 22MB to 21MB.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason that bugreport has to be a separate binary. And since
it links against libgit.a, it has a rather large disk footprint. Let's
make it a builtin, which reduces the size of a stripped installation
from 24MB to 22MB.
This also simplifies our Makefile a bit. And we can take advantage of
builtin niceties like RUN_SETUP_GENTLY.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no real reason for credential helpers to be separate binaries. I
did them this way originally under the notion that helper don't _need_
to be part of Git, and so can be built totally separately (and indeed,
the ones in contrib/credential are). But the ones in our main Makefile
build on libgit.a, and the resulting binaries are reasonably large.
We can slim down our total disk footprint by just making them builtins.
This reduces the size of:
make strip install
from 29MB to 24MB on my Debian system.
Note that credential-cache can't operate without support for Unix
sockets. Currently we just don't build it at all when NO_UNIX_SOCKETS is
set. We could continue that with conditionals in the Makefile and our
list of builtins. But instead, let's build a dummy implementation that
dies with an informative message. That has two advantages:
- it's simpler, because the conditional bits are all kept inside
the credential-cache source
- a user who is expecting it to exist will be told _why_ they can't
use it, rather than getting the "credential-cache is not a git
command" error which makes it look like the Git install is broken.
Note that our dummy implementation does still respond to "-h" in order
to appease t0012 (and this may be a little friendlier for users, as
well).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin.h, there exists the distinctly lib-ish function
prune_packed_objects(). This function can currently only be called by
built-in commands but, unlike all of the other functions in the header,
it does not make sense to impose this restriction as the functionality
can be logically reused in libgit.
Extract this function into prune-packed.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin.h, there exists the distinctly "lib-ish" function
fmt_merge_msg(). This function can currently only be called by built-in
commands but, unlike most of the other functions in the header, it does
not make sense to impose this restriction as the functionality can be
logically reused in libgit.
Extract this function into fmt-merge-msg.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many GIT_TEST_* environment variables control various aspects of
how our tests are run, but a few followed "non-empty is true, empty
or unset is false" while others followed the usual "there are a few
ways to spell true, like yes, on, etc., and also ways to spell
false, like no, off, etc." convention.
* ab/test-env:
env--helper: mark a file-local symbol as static
tests: make GIT_TEST_FAIL_PREREQS a boolean
tests: replace test_tristate with "git env--helper"
tests README: re-flow a previously changed paragraph
tests: make GIT_TEST_GETTEXT_POISON a boolean
t6040 test: stop using global "script" variable
config.c: refactor die_bad_number() to not call gettext() early
env--helper: new undocumented builtin wrapping git_env_*()
config tests: simplify include cycle test
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
We have many GIT_TEST_* variables that accept a <boolean> because
they're implemented in C, and then some that take <non-empty?> because
they're implemented at least partially in shellscript.
Add a helper that wraps git_env_bool() and git_env_ulong() as the
first step in fixing this. This isn't being added as a test-tool mode
because some of these are used outside the test suite.
Part of what this tool does can be done via a trick with "git config"
added in 83d842dc8c ("tests: turn on network daemon tests by default",
2014-02-10) for test_tristate(), i.e.:
git -c magic.variable="$1" config --bool magic.variable 2>/dev/null
But as subsequent changes will show being able to pass along the
default value makes all the difference, and we'll be able to replace
test_tristate() itself with that.
The --type=bool option will be used by subsequent patches, but not
--type=ulong. I figured it was easy enough to add it & test for it so
I left it in so we'd have wrappers for both git_env_*() functions, and
to have a template to make it obvious how we'd add --type=int etc. if
it's needed in the future.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mechanically and systematically drop "extern" from function
declarlation.
* dl/no-extern-in-func-decl:
*.[ch]: manually align parameter lists
*.[ch]: remove extern from function declarations using sed
*.[ch]: remove extern from function declarations using spatch
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous patches, extern was mechanically removed from function
declarations without care to formatting, causing parameter lists to be
misaligned. Manually format changed sections such that the parameter
lists should be realigned.
Viewing this patch with 'git diff -w' should produce no output.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git serve` built-in was introduced in ed10cb952d (serve:
introduce git-serve, 2018-03-15) as a backend to serve Git protocol v2,
probably originally intended to be spawned by `git upload-pack`.
However, in the version that the protocol v2 patches made it into core
Git, `git upload-pack` calls the `serve()` function directly instead of
spawning `git serve`; The only reason in life for `git serve` to survive
as a built-in command is to provide a way to test the protocol v2
functionality.
Meaning that it does not even have to be a built-in that is installed
with end-user facing Git installations, but it can be a test helper
instead.
Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old shell script `git-stash.sh` was removed and replaced
entirely by `builtin/stash.c`. In order to do that, `create` and
`push` were adapted to work without `stash.sh`. For example, before
this commit, `git stash create` called `git stash--helper create
--message "$*"`. If it called `git stash--helper create "$@"`, then
some of these changes wouldn't have been necessary.
This commit also removes the word `helper` since now stash is
called directly and not by a shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a builtin helper for performing stash commands. Converting
all at once proved hard to review, so starting with just apply
lets conversion get started without the other commands being
finished.
The helper is being implemented as a drop in replacement for
stash so that when it is complete it can simply be renamed and
the shell script deleted.
Delete the contents of the apply_stash shell function and replace
it with a call to stash--helper apply until pop is also
converted.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
Rewrite of the "rebase" machinery in C.
* pk/rebase-in-c:
builtin/rebase: support running "git rebase <upstream>"
rebase: refactor common shell functions into their own file
rebase: start implementing it as a builtin
This moves the rebase--helper modes still used by
git-rebase--preserve-merges.sh (`--shorten-ids`, `--expand-ids`,
`--check-todo-list`, `--rearrange-squash` and `--add-exec-commands`) to
rebase--interactive.c.
git-rebase--preserve-merges.sh is modified accordingly, and
rebase--helper.c is removed as it is useless now.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites the part of interactive rebase which initializes the
basic state, make the script and complete the action, as a buitin, named
git-rebase--interactive2 for now. Others modes (`--continue`,
`--edit-todo`, etc.) will be rewritten in the next commit.
git-rebase--interactive.sh is modified to call git-rebase--interactive2
instead of git-rebase--helper.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ds/multi-pack-index: (23 commits)
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
midx: sort and deduplicate objects from packfiles
midx: read pack names into array
multi-pack-index: write pack names in chunk
multi-pack-index: read packfile list
packfile: generalize pack directory list
t5319: expand test data
multi-pack-index: load into memory
midx: write header information to lockfile
multi-pack-index: add 'write' verb
...
This command does not do a whole lot so far, apart from showing a usage
that is oddly similar to that of `git tbdiff`. And for a good reason:
the next commits will turn `range-branch` into a full-blown replacement
for `tbdiff`.
At this point, we ignore tbdiff's color options, as they will all be
implemented later using diff_options.
Since f318d73915 (generate-cmds.sh: export all commands to
command-list.h, 2018-05-10), every new command *requires* a man page to
build right away, so let's also add a blank man page, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit imitates the strategy that was used to convert the
difftool to a builtin. We start by renaming the shell script
`git-rebase.sh` to `git-legacy-rebase.sh` and introduce a
`builtin/rebase.c` that simply executes the shell script version,
unless the config setting `rebase.useBuiltin` is set to `true`.
The motivation behind this is to rewrite all the functionality of the
shell script version in the aforementioned `rebase.c`, one by one and
be able to conveniently test new features by configuring
`rebase.useBuiltin`.
In the original difftool conversion, if sane_execvp() that attempts to
run the legacy scripted version returned with non-negative status, the
command silently exited without doing anything with success, but
sane_execvp() should not return with non-negative status in the first
place, so we use die() to notice such an abnormal case.
We intentionally avoid reading the config directly to avoid
messing up the GIT_* environment variables when we need to fall back to
exec()ing the shell script. The test of builtin rebase can be done by
`git -c rebase.useBuiltin=true rebase ...`
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new 'git multi-pack-index' builtin will be the plumbing access
for writing, reading, and checking multi-pack-index files. The
initial implementation is a no-op.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-show-index command is built as its own separate
program. There's really no good reason for this, and it
means we waste extra space on disk (and CPU time running the
linker). Let's fold it in to the main binary as a builtin.
The history here is actually a bit amusing. The program
itself is mostly self-contained, and doesn't even use our
normal pack index code. In a5031214c4 (slim down "git
show-index", 2010-01-21), we even stopped using xmalloc() so
that it could avoid libgit.a entirely. But then 040a655116
(cleanup: use internal memory allocation wrapper functions
everywhere, 2011-10-06) switched that back to xmalloc, which
later become ALLOC_ARRAY().
Making it a builtin should give us the best of both worlds:
no wasted space and no need to avoid the usual patterns.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.
* ds/commit-graph:
commit-graph: implement "--append" option
commit-graph: build graph from starting commits
commit-graph: read only from specific pack-indexes
commit: integrate commit graph with commit parsing
commit-graph: close under reachability
commit-graph: add core.commitGraph setting
commit-graph: implement git commit-graph read
commit-graph: implement git-commit-graph write
commit-graph: implement write_commit_graph()
commit-graph: create git-commit-graph builtin
graph: add commit graph design document
commit-graph: add format document
csum-file: refactor finalize_hashfile() method
csum-file: rename hashclose() to finalize_hashfile()
Teach git the 'commit-graph' builtin that will be used for writing and
reading packed graph files. The current implementation is mostly
empty, except for an '--object-dir' option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce git-serve, the base server for protocol version 2.
Protocol version 2 is intended to be a replacement for Git's current
wire protocol. The intention is that it will be a simpler, less
wasteful protocol which can evolve over time.
Protocol version 2 improves upon version 1 by eliminating the initial
ref advertisement. In its place a server will export a list of
capabilities and commands which it supports in a capability
advertisement. A client can then request that a particular command be
executed by providing a number of capabilities and command specific
parameters. At the completion of a command, a client can request that
another command be executed or can terminate the connection by sending a
flush packet.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to allow for code sharing with the server-side of fetch in
protocol-v2 convert upload-pack to be a builtin.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch introduced a way for builtins to declare that they
will take responsibility for handling the `pager.foo`-config item. (See
the commit message of that patch for why that could be useful.)
Provide setup_auto_pager(), which builtins can call in order to handle
`pager.<cmd>`, including possibly starting the pager. Make this function
don't do anything if a pager has already been started, as indicated by
use_pager or pager_in_use().
Whenever this function is called from a builtin, git.c will already have
called commit_pager_choice(). Since commit_pager_choice() treats the
special value -1 as "punt" or "not yet decided", it is not a problem
that we might end up calling commit_pager_choice() once in git.c and
once (or more) in the builtin. Make the new function use -1 in the same
way and document it as "punt".
Don't add any users of setup_auto_pager just yet, one will follow in
a later patch.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before launching a builtin git foo and unless mechanisms with precedence
are in use, we check for and handle the `pager.foo` config. This is done
without considering exactly how git foo is being used, and indeed, git.c
cannot (and should not) know what the arguments to git foo are supposed
to achieve.
In practice this means that, e.g., `git -c pager.tag tag -a new-tag`
results in errors such as "Vim: Warning: Output is not to a terminal"
and a garbled terminal. Someone who makes use of both `git tag -a` and
`git tag -l` will probably not set `pager.tag`, so that `git tag -a`
will actually work, at the cost of not paging output of `git tag -l`.
To allow individual builtins to make more informed decisions about when
to respect `pager.foo`, introduce a flag DELAY_PAGER_CONFIG. If the flag
is set, do not check `pager.foo`.
Do not check for DELAY_PAGER_CONFIG in `execv_dashed_external()`. That
call site is arguably wrong, although in a way that is not yet visible,
and will be changed in a slightly different direction in a later patch.
Don't add any users of DELAY_PAGER_CONFIG just yet, one will follow in a
later patch.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delete Documentation/technical/api-builtin.txt and move its content
into builtin.h. Format it as a comment. Remove a '+' which was needed
when the information was formatted for AsciiDoc. Similarly, change
"::" to ":".
Document SUPPORT_SUPER_PREFIX, thereby bringing the documentation up to
date with the available flags.
While at it, correct '3 more things to do' to '4 more things to do'.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
textconv_object is used in places other than blame.c and should be moved
to a more appropriate location. Other textconv related functions are
located in diff.c so that seems as good a place as any.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's interactive rebase is still implemented as a shell script, despite
its complexity. This implies that it suffers from the portability point
of view, from lack of expressibility, and of course also from
performance. The latter issue is particularly serious on Windows, where
we pay a hefty price for relying so much on POSIX.
Unfortunately, being such a huge shell script also means that we missed
the train when it would have been relatively easy to port it to C, and
instead piled feature upon feature onto that poor script that originally
never intended to be more than a slightly pimped cherry-pick in a loop.
To open the road toward better performance (in addition to all the other
benefits of C over shell scripts), let's just start *somewhere*.
The approach taken here is to add a builtin helper that at first intends
to take care of the parts of the interactive rebase that are most
affected by the performance penalties mentioned above.
In particular, after we spent all those efforts on preparing the sequencer
to process rebase -i's git-rebase-todo scripts, we implement the `git
rebase -i --continue` functionality as a new builtin, git-rebase--helper.
Once that is in place, we can work gradually on tackling the rest of the
technical debt.
Note that the rebase--helper needs to learn about the transient
--ff/--no-ff options of git-rebase, as the corresponding flag is not
persisted to, and re-read from, the state directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a builtin difftool that still falls back to the legacy Perl
version, which has been renamed to `legacy-difftool`.
The idea is that the new, experimental, builtin difftool immediately hands
off to the legacy difftool for now, unless the config variable
difftool.useBuiltin is set to true.
This feature flag will be used in the upcoming Git for Windows v2.11.0
release, to allow early testers to opt-in to use the builtin difftool and
flesh out any bugs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since all of its callers have been updated, make textconv_object take a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The infrastructure to rewrite "git submodule" in C is being built
incrementally. Let's polish these early parts well enough and make
them graduate to 'next' and 'master', so that the more involved
follow-up can start cooking on a solid ground.
* sb/submodule-helper:
submodule: rewrite `module_clone` shell function in C
submodule: rewrite `module_name` shell function in C
submodule: rewrite `module_list` shell function in C
Most of the submodule operations work on a set of submodules.
Calculating and using this set is usually done via:
module_list "$@" | {
while read mode sha1 stage sm_path
do
# the actual operation
done
}
Currently the function `module_list` is implemented in the
git-submodule.sh as a shell script wrapping a perl script.
The rewrite is in C, such that it is faster and can later be
easily adapted when other functions are rewritten in C.
git-submodule.sh, similar to the builtin commands, will navigate
to the top-most directory of the repository and keep the
subdirectory as a variable. As the helper is called from
within the git-submodule.sh script, we are already navigated
to the root level, but the path arguments are still relative
to the subdirectory we were in when calling git-submodule.sh.
That's why there is a `--prefix` option pointing to an alternative
path which to anchor relative path arguments.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-am.sh into a C builtin, implement a
skeletal builtin/am.c that redirects to $GIT_EXEC_PATH/git-am if the
environment variable _GIT_USE_BUILTIN_AM is not defined. Since in the
Makefile git-am.sh takes precedence over builtin/am.c,
$GIT_EXEC_PATH/git-am will contain the shell script git-am.sh, and thus
this allows us to fall back on the functional git-am.sh when running the
test suite for tests that depend on a working git-am implementation.
Since git-am.sh cannot handle any environment modifications by
setup_git_directory(), "am" is declared with no setup flags in git.c. On
the other hand, to re-implement git-am.sh in builtin/am.c, we need to
run all the git dir and work tree setup logic that git.c typically does
for us. As such, we work around this temporarily by copying the logic in
git.c's run_builtin(), which is roughly:
prefix = setup_git_directory();
trace_repo_setup(prefix);
setup_work_tree();
This redirection should be removed when all the features of git-am.sh
have been re-implemented in builtin/am.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement 'git pull' in C.
* pt/pull-builtin:
pull: remove redirection to git-pull.sh
pull --rebase: error on no merge candidate cases
pull --rebase: exit early when the working directory is dirty
pull: configure --rebase via branch.<name>.rebase or pull.rebase
pull: teach git pull about --rebase
pull: set reflog message
pull: implement pulling into an unborn branch
pull: fast-forward working tree if head is updated
pull: check if in unresolved merge state
pull: support pull.ff config
pull: error on no merge candidates
pull: pass git-fetch's options to git-fetch
pull: pass git-merge's options to git-merge
pull: pass verbosity, --progress flags to fetch and merge
pull: implement fetch + merge
pull: implement skeletal builtin pull
argv-array: implement argv_array_pushv()
parse-options-cb: implement parse_opt_passthru_argv()
parse-options-cb: implement parse_opt_passthru()
