Test fixes.
* sm/no-git-in-upstream-of-pipe-in-tests:
t0030-t0050: avoid pipes with Git on LHS
t0001-t0028: avoid pipes with Git on LHS
t0003: avoid pipes with Git on LHS
Pipes ignore error codes of LHS command and thus we should not use
them with Git in tests. As an alternative, use a 'tmp' file to write
the Git output so we can test the exit code.
Signed-off-by: Shubham Mishra <shivam828787@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, it isn't clear what the behavior is when the eol attribute is
set in .gitattributes but the text attribute is not. Let's add some
tests to document this behavior in our code, which happens to be that
the behavior is as if we set the text attribute implicitly. This will
make sure we don't accidentally change the behavior, which somebody is
probably relying on, and serve as documentation to developers.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 878f988350 (t/test-lib: teach --chain-lint to detect broken
&&-chains in subshells, 2018-07-11) introduced additional chain-lint
tests which add an extra "sed" pipeline to each test we run. This has a
measurable impact on runtime. Here are timings with and without a new
environment variable (added by this patch) that lets you disable just
the additional sed-based chain-lint tests:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 make test
Time (mean ± σ): 64.202 s ± 1.030 s [User: 622.469 s, System: 301.402 s]
Range (min … max): 61.571 s … 65.662 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 make test
Time (mean ± σ): 57.591 s ± 0.333 s [User: 529.368 s, System: 270.618 s]
Range (min … max): 57.143 s … 58.309 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 make test' ran
1.11 ± 0.02 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 make test'
Of course those extra lint checks are doing something useful, so paying
a few extra seconds (at least on Linux) isn't so bad (though note the
CPU time; we're bounded in our parallel run here by the slowest test, so
it really is ~120s of CPU improvement).
But we can observe that there are some test scripts where they produce a
much stronger effect, and provide less value. In t0027 and t3070 we run
a very large number of small tests, all driven by a series of
functions/loops which are filling in the test bodies. There we get much
less bang for our buck in terms of bug-finding versus CPU cost.
This patch introduces a mechanism for controlling when those extra
lint checks are run, at two levels:
- a user can ask to disable or to force-enable the checks by setting
GIT_TEST_CHAIN_LINT_HARDER
- if the user hasn't specified a preference, individual scripts can
disable the checks by setting GIT_TEST_CHAIN_LINT_HARDER_DEFAULT;
scripts which don't set that get the current behavior of enabling
them.
In addition, this patch flips the default for t0027 and t3070's
mass-generated sections to disable the extra checks. Here are the timing
results for t0027:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh
Time (mean ± σ): 17.078 s ± 0.848 s [User: 14.878 s, System: 7.075 s]
Range (min … max): 15.952 s … 18.421 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh
Time (mean ± σ): 9.063 s ± 0.759 s [User: 7.890 s, System: 3.362 s]
Range (min … max): 7.747 s … 10.619 s 10 runs
Benchmark #3: ./t0027-auto-crlf.sh
Time (mean ± σ): 9.186 s ± 0.881 s [User: 7.957 s, System: 3.427 s]
Range (min … max): 7.796 s … 10.498 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh' ran
1.01 ± 0.13 times faster than './t0027-auto-crlf.sh'
1.88 ± 0.18 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh'
We can see that disabling the checks for the whole script buys us an
almost 2x speedup. But the new default behavior, disabling them only for
the mass-generated part, gets us most of that speedup (but still leaves
the checks on for further manual tests people might write).
As a side note, I'd caution about comparing runtimes and CPU seconds
between this timing and the earlier "make test" one. In "make test",
we're running a lot of scripts in parallel, so the CPU is throttling
down (and thus a CPU second saved here would count for more during a
parallel run; the same work takes more CPU seconds there).
We get similar results for t3070:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh
Time (mean ± σ): 20.054 s ± 3.967 s [User: 16.003 s, System: 8.286 s]
Range (min … max): 11.891 s … 23.671 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh
Time (mean ± σ): 12.399 s ± 2.256 s [User: 7.542 s, System: 5.342 s]
Range (min … max): 9.606 s … 15.727 s 10 runs
Benchmark #3: ./t3070-wildmatch.sh
Time (mean ± σ): 10.726 s ± 3.476 s [User: 6.790 s, System: 4.365 s]
Range (min … max): 5.444 s … 15.376 s 10 runs
Summary
'./t3070-wildmatch.sh' ran
1.16 ± 0.43 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh'
1.87 ± 0.71 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh'
Again, we get almost a 2x speedup disabling these. In this case, there
are no tests not covered by the script's "default to disable" behavior,
so the second two benchmarks should be the same (and while they do
differ, you can see the variance is quite high but they're within one
standard deviation).
So it seems like for these two scripts, at least, disabling the extra
checks is a reasonable tradeoff. Sadly, the overall runtime of "make
test" on my system doesn't get much faster. But that's because we're
mostly limited by the cost of the single biggest test. Here are the
top-5 tests by wall-clock time from a parallel run, before my patch:
57.9192368984222 t9001-send-email.sh
45.6329638957977 t0027-auto-crlf.sh
32.5278220176697 t3070-wildmatch.sh
22.2701289653778 t7610-mergetool.sh
20.8635759353638 t1701-racy-split-index.sh
And after:
57.1476998329163 t9001-send-email.sh
33.776211977005 t0027-auto-crlf.sh
21.3116669654846 t7610-mergetool.sh
20.7748689651489 t1701-racy-split-index.sh
19.6957249641418 t7112-reset-submodule.sh
We dropped 12s from t0027, and t3070 dropped off our list entirely at
around 16s. In both cases we're bound by t9001, but its slowness is
due to the actual tests, so we'll have to deal with it in a different
way. But this reduces overall CPU, and means that dealing with t9001 (by
improving the speed of send-email or splitting it apart) will let us
reduce our overall runtime even on multi-core machines.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several parts of this test generate files that have specific hard-coded
object IDs in them. We don't really care about what the object ID in
question is, so we turn them all to zeros.
However, because some of these values are fixed and some are generated,
they can be of different lengths, which causes problems when running
with SHA-256. Furthermore, some assertions in this test use only fixed
object IDs and some use both fixed and generated ones, so converting
only the expected results fixes some tests while breaking others.
Convert both actual and expected object IDs to the all-zeros object ID
of the appropriate length to ensure that the test passes when using
SHA-256.
The astute observer will notice that both tr and sed are used here.
Converting the tr call to a sed y/// command looks logical at first, but
it isn't possible because POSIX doesn't allow escapes in y/// commands
other than "\\" and "\n".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "safe crlf" check incorrectly triggered for contents that does
not use CRLF as line endings, which has been corrected.
* tb/check-crlf-for-safe-crlf:
t0027: Adapt the new MIX tests to Windows
convert: tighten the safe autocrlf handling
The new MIX tests don't pass under Windows, adapt them
to use the correct native line ending.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a text file had been commited with CRLF and the file is commited
again, the CRLF are kept if .gitattributs has "text=auto".
This is done by analyzing the content of the blob stored in the index:
If a '\r' is found, Git assumes that the blob was commited with CRLF.
The simple search for a '\r' does not always work as expected:
A file is encoded in UTF-16 with CRLF and commited. Git treats it as binary.
Now the content is converted into UTF-8. At the next commit Git treats the
file as text, the CRLF should be converted into LF, but isn't.
Replace has_cr_in_index() with has_crlf_in_index(). When no '\r' is found,
0 is returned directly, this is the most common case.
If a '\r' is found, the content is analyzed more deeply.
Reported-By: Ashish Negi <ashishnegi33@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final step to make an empty string as a pathspec element
illegal. We started this by first deprecating and warning a
pathspec that has such an element in 2.11 (Nov 2016).
Hopefully we can merge this down to the 'master' by the end of the
year? A deprecation warning period that is about 1 year does not
sound too bad.
* ex/deprecate-empty-pathspec-as-match-all:
pathspec: die on empty strings as pathspec
t0027: do not use an empty string as a pathspec element
In an upcoming update, we will finally make an empty string illegal
as an element in a pathspec; it traditionally meant the same as ".",
i.e. include everything, so update this test that passes "" to pass
a dot instead.
At this point in the test sequence, there is no modified path that
need to be further added before committing; the working tree is
empty except for .gitattributes which was just added to the index.
So we could instead pass no pathspec, but this is a conversion more
faithful to the original.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update tests to pass under GETTEXT_POISON (a mechanism to ensure
that output strings that should not be translated are not
translated by mistake), and tell TravisCI to run them.
* ab/fix-poison-tests:
travis-ci: add job to run tests with GETTEXT_POISON
travis-ci: setup "prove cache" in "script" step
tests: fix tests broken under GETTEXT_POISON=YesPlease
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.
I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.
My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.
1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of t0027 is to test all CRLF related conversions at "git
checkout" and "git add". Running t0027 under Git for Windows takes
3-4 minutes, so the whole script had been marked as "EXPENSIVE".
However, the "Git for Windows" fork overrides this since 2014:
"t0027 is marked expensive, but really, for MinGW we want to run
these tests always."
The test seems not to be expensive on other platforms at all: it
takes less than 14 seconds under Linux, and 63 seconds under Mac Os
X, and this is more or less the same with a SSD or a spinning disk.
So let's drop the "EXPENSIVE" prereq.
While at it, retire t0025; recent "stress" tests show that t0025 is
flaky, reported by Lars Schneider <larsxschneider@gmail.com>, but
all tests in t0025 are covered by t0027 already.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a non-reversible CRLF conversion is done in "git add",
a warning is printed on stderr (or Git dies, depending on checksafe)
The function commit_chk_wrnNNO() in t0027 was written to test this,
but did the wrong thing: Instead of looking at the warning
from "git add", it looked at the warning from "git commit".
This is racy because "git commit" may not have to do CRLF conversion
at all if it can use the sha1 value from the index (which depends on
whether "add" and "commit" run in a single second).
Correct t0027 and replace the commit for each and every file with a commit
of all files in one go.
The function commit_chk_wrnNNO() should be renamed in a separate commit.
Now that t0027 does the right thing, it detects a bug in covert.c:
This sequence should generate the warning `LF will be replaced by CRLF`,
but does not:
$ git init
$ git config core.autocrlf false
$ printf "Line\r\n" >file
$ git add file
$ git commit -m "commit with CRLF"
$ git config core.autocrlf true
$ printf "Line\n" >file
$ git add file
"git add" calls crlf_to_git() in convert.c, which calls check_safe_crlf().
When has_cr_in_index(path) is true, crlf_to_git() returns too early and
check_safe_crlf() is not called at all.
Factor out the code which determines if "git checkout" converts LF->CRLF
into will_convert_lf_to_crlf().
Update the logic around check_safe_crlf() and "simulate" the possible
LF->CRLF conversion at "git checkout" with help of will_convert_lf_to_crlf().
Thanks to Jeff King <peff@peff.net> for analyzing t0027.
Reported-By: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this change,
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
would have the same effect as
$ echo "* text" >.gitattributes
$ git config core.eol crlf
Since the 'eol' attribute had higher priority than 'text=auto', this may
corrupt binary files and is not what most users expect to happen.
Make the 'eol' attribute to obey 'text=auto' and now
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
behaves the same as
$ echo "* text=auto" >.gitattributes
$ git config core.eol crlf
In other words,
$ echo "* text=auto eol=crlf" >.gitattributes
has the same effect as
$ git config core.autocrlf true
and
$ echo "* text=auto eol=lf" >.gitattributes
has the same effect as
$ git config core.autocrlf input
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the ident attributes is set, get_stream_filter() did not obey
core.autocrlf=true, and the file was checked out with LF.
Change the rule when a streaming filter can be used:
- if an external filter is specified, don't use a stream filter.
- if the worktree eol is CRLF and "auto" is active, don't use a stream filter.
- Otherwise the stream filter can be used.
Add test cases in t0027.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more test cases for the not normalized files ("NNO"). The
"text" attribute is most important, use it as the first parameter.
"ident", if set, is the second paramater followed by the eol
attribute. The eol attribute overrides core.autocrlf, which
overrides core.eol.
indent is not yet used, this will be done in the next commit.
Use loops to test more combinations of attributes, like
"* text eol=crlf" or especially "*text=auto eol=crlf".
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the content of a commited file is unchanged and the attributes
are changed, Git may not detect that the next commit must treat the
file as changed. This happens when lstat() doesn't detect a change,
since neither inode, mtime nor size are changed.
Add a single "Z" character to change the file size and content.
When the files are compared later in checkout_files(), the "Z" is
removed before the comparison.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
df747b81 (convert.c: refactor crlf_action, 2016-02-10) introduced a
bug to "git ls-files --eol".
The "text" attribute was shown as "text eol=lf" or "text eol=crlf",
depending on core.autocrlf or core.eol.
Correct this and add test cases in t0027.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a filter is configured, a different code-path is used in convert.c
and entry.c via get_stream_filter(), but there are no test cases yet.
Add tests for the filter API by configuring the ident filter.
The result of the SHA1 conversion is not checked, this is already
done in other TC.
Add a parameter to checkout_files() in t0027.
While changing the signature, add another parameter for the eol= attribute.
This is currently unused, tests for e.g.
"* text=auto eol=lf" will be added in a separate commit.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working in a cross-platform environment, a user may want to
check if text files are stored normalized in the repository and
if .gitattributes are set appropriately.
Make it possible to let Git show the line endings in the index and
in the working tree and the effective text/eol attributes.
The end of line ("eolinfo") are shown like this:
"-text" binary (or with bare CR) file
"none" text file without any EOL
"lf" text file with LF
"crlf" text file with CRLF
"mixed" text file with mixed line endings.
The effective text/eol attribute is one of these:
"", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf"
git ls-files --eol gives an output like this:
i/none w/none attr/text=auto t/t5100/empty
i/-text w/-text attr/-text t/test-binary-2.png
i/lf w/lf attr/text eol=lf t/t5100/rfc2047-info-0007
i/lf w/crlf attr/text eol=crlf doit.bat
i/mixed w/mixed attr/ locale/XX.po
to show what eol convention is used in the data in the index ('i'),
and in the working tree ('w'), and what attribute is in effect,
for each path that is shown.
Add test cases in t0027.
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a text file with mixed line endings is commited into the repo,
it is called "not normalized" (or NNO) in t0027. The existing test
case using repoMIX did not fully test all combinations: (Especially
when core.autocrlf = true) Files with NL are not converted at
commit, but at checkout, so a warning NL->CRLF is given. Files with
CRLF are not converted at all (so no warning will be given), unless
they are marked as "text" or "auto".
Remove repoMIX introduced in commit 8eeab92f02, and replace it with
a combination of NNO tests.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
"new safer autocrlf handling":
- Check if eols in a file are converted at commit, when the file has
CR (or CRLF) in the repo (technically speaking in the index).
- Add a test-file repoMIX with mixed line-endings.
- When converting LF->CRLF or CRLF->LF: check the warnings
checkout_files():
- Checking out CRLF_nul and checking for eol coversion does not
make much sense (CRLF will stay CRLF).
- Use the file LF_nul instead: It is handled a binary in "auto" modes,
and when declared as text the LF may be replaced with CRLF, depending
on the configuration.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0027 expects the native end-of-lines to be a single line feed
character. On Windows, however, we set it to a carriage return
character followed by a line feed character. Thus, we have to
modify t0027 to expect different warnings depending on the
end-of-line markers.
Adjust the check of the warnings and use these macros:
WILC: Warn if LF becomes CRLF
WICL: Warn if CRLF becomes LF
WAMIX: Mixed line endings: either CRLF->LF or LF->CRLF
Improve the information given by check_warning().
Use test_cmp to show which warning is missing (or shouldn't be
there).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make more clear what the tests are doing:
commit_check_warn():
Commit files and checks for conversion warnings.
Old name: create_file_in_repo()
checkout_files():
Checkout files from the repo and check if they have
the appropriate line endings in the work space.
Old name: check_files_in_ws()
Replace non-leading TABS with spaces
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the file content, eol parameters and .gitattributes
"git add" may give a warning when the eol of a file will change when
the file is checked out again.
There are 2 different warnings, either "CRLF will be replaced..." or
"LF will be replaced...". Let t0027 check for these warnings by
adding new parameters to create_file_in_repo(), which tells what
warnings are expected.
When a file has eol=lf or eol=crlf in .gitattributes, it is handled
as text and should be normalized. Add tests for these cases that
were not covered.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases for core.eol "native" and "" (unset).
(MINGW uses CRLF, all other systems LF as native line endings)
Add test cases for the attributes "eol=lf" and "eol=crlf"
Other minor changes:
- Use the more portable 'tr' instead of 'od -c' to convert '\n' into 'Q'
and '\0' into 'N'
- Style fixes for shell functions according to the coding guide lines
- Replace "txtbin" with "attr"
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically there are 3 different parameters controlling how line endings
are handled by Git:
- core.autocrlf
- core.eol
- the "text" attribute in .gitattributes
There are different types of content:
- (1) Files with only LF
- (2) Files with only CRLF
- (3) Files with mixed LF and CRLF
- (4) Files with LF and/or CRLF with CR not followed by LF
- (5) Files which are binary (e.g. have NUL bytes)
Recently the question came up, how files with mixed EOLs are handled by Git
(and libgit2) when they are checked out and core.autocrlf=true.
See
http://git.661346.n2.nabble.com/The-different-EOL-behavior-between-libgit2-based-software-and-official-Git-td7613670.html#a7613801
Add the EXPENSIVE t0027-auto-crlf.sh to test all combination of files
and parameters for both "git add/commit" and "git checkout".
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
