Replace the "grep" we run to exclude certain programs from the
generated output with a pure-shell loop that strips out the comments,
and sees if the "cmd" we're reading is on a list of excluded
programs. This uses a trick similar to test_have_prereq() in
test-lib-functions.sh.
On my *nix system this makes things quite a bit slower compared to
HEAD~:
o
'sh generate-cmdlist.sh.old command-list.txt' ran
1.56 ± 0.11 times faster than 'sh generate-cmdlist.sh command-list.txt'
18.00 ± 0.19 times faster than 'sh generate-cmdlist.sh.master command-list.txt'
But when I tried running generate-cmdlist.sh 100 times in CI I found
that it helped across the board even on OSX & Linux. I tried testing
it in CI with this ad-hoc few-liner:
for i in $(seq -w 0 11 | sort -nr)
do
git show HEAD~$i:generate-cmdlist.sh >generate-cmdlist-HEAD$i.sh &&
git add generate-cmdlist* &&
cp t/t0000-generate-cmdlist.sh t/t00$i-generate-cmdlist.sh || : &&
perl -pi -e "s/HEAD0/HEAD$i/g" t/t00$i-generate-cmdlist.sh &&
git add t/t00*.sh
done && git commit -m"generated it"
Here HEAD~02 and the t0002* file refers to this change, and HEAD~03
and t0003* file to the preceding commit, the relevant results were:
linux-gcc:
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
[12:05:30] t0003-generate-cmdlist.sh .. ok 32 ms ( 0.00 usr 0.00 sys + 2.66 cusr 1.81 csys = 4.47 CPU)
osx-gcc:
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
[11:58:16] t0003-generate-cmdlist.sh .. ok 92127 ms ( 0.02 usr 0.01 sys + 22.54 cusr 14.27 csys = 36.84 CPU)
vs-test:
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
[12:03:20] t0003-generate-cmdlist.sh .. ok 32 s ( 0.00 usr 0.02 sys + 13.25 cusr 26.10 csys = 39.37 CPU)
I.e. even on *nix running 100 of these in a loop was up to ~2x faster
in absolute runtime, I suspect it's due factors that are exacerbated
in the CI, e.g. much slower process startup due to some platform
limits, or a slower FS.
The "cut -d" change here is because we're not emitting the
40-character aligned output anymore, i.e. we'll get the output from
command_list() now, not an as-is line from command-list.txt.
This also makes the parsing more reliable, as we could tweak the
whitespace alignment without breaking this parser. Let's reword a
now-inaccurate comment in "command-list.txt" describing that previous
alignment limitation. We'll still need the "### command-list [...]"
line due to the "Documentation/cmd-list.perl" logic added in
11c6659d85 (command-list: prepare machinery for upcoming "common
groups" section, 2015-05-21).
There was a proposed change subsequent to this one[3] which continued
moving more logic into the "command_list() function, i.e. replaced the
"cut | tr | grep" chain in "category_list()" with an argument to
"command_list()".
That change might have had a bit of an effect, but not as much as the
preceding commit, so I decided to drop it. The relevant performance
numbers from it were:
linux-gcc:
[12:05:33] t0001-generate-cmdlist.sh .. ok 13 ms ( 0.00 usr 0.00 sys + 3.33 cusr 2.78 csys = 6.11 CPU)
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
osx-gcc:
[11:58:03] t0001-generate-cmdlist.sh .. ok 78416 ms ( 0.02 usr 0.01 sys + 11.78 cusr 6.22 csys = 18.03 CPU)
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
vs-test:
[12:03:20] t0001-generate-cmdlist.sh .. ok 34 s ( 0.00 usr 0.03 sys + 12.42 cusr 19.55 csys = 32.00 CPU)
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
As above HEAD~2 and t0002* are testing the code in this commit (and
the line is the same), but HEAD~1 and t0001* are testing that dropped
change in [3].
1. https://lore.kernel.org/git/cover-v2-00.10-00000000000-20211022T193027Z-avarab@gmail.com/
2. https://lore.kernel.org/git/patch-v2-08.10-83318d6c0da-20211022T193027Z-avarab@gmail.com/
3. https://lore.kernel.org/git/patch-v2-10.10-e10a43756d1-20211022T193027Z-avarab@gmail.com/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the "sed" invocation in get_synopsis() with a pure-shell
version. This speeds up generate-cmdlist.sh significantly. Compared to
HEAD~ (old) and "master" we are, according to hyperfine(1):
'sh generate-cmdlist.sh command-list.txt' ran
12.69 ± 5.01 times faster than 'sh generate-cmdlist.sh.old command-list.txt'
18.34 ± 3.03 times faster than 'sh generate-cmdlist.sh.master command-list.txt'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a preceding commit we changed the print_command_list() loop to use
printf's auto-repeat feature. Let's now get rid of get_category_line()
entirely by not sorting the categories.
This will change the output of the generated code from e.g.:
- { "git-apply", N_("Apply a patch to files and/or to the index"), 0 | CAT_complete | CAT_plumbingmanipulators },
To:
+ { "git-apply", N_("Apply a patch to files and/or to the index"), 0 | CAT_plumbingmanipulators | CAT_complete },
I.e. the categories are no longer sorted, but as they're OR'd together
it won't matter for the end result.
This speeds up the generate-cmdlist.sh a bit. Comparing HEAD~ (old)
and "master" to this code:
'sh generate-cmdlist.sh command-list.txt' ran
1.07 ± 0.33 times faster than 'sh generate-cmdlist.sh.old command-list.txt'
1.15 ± 0.36 times faster than 'sh generate-cmdlist.sh.master command-list.txt'
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just a small code reduction. There is a small probability that
the new code breaks when the category list is empty. But that would be
noticed during the compile step.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This doesn't matter for performance, but let's not include the empty
lines in our sorting. This makes the intent of the code clearer.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This isn't for optimization as the get_categories() is a purely shell
function, but rather for ease of readability, let's just inline these
two lines. We'll be changing this code some more in subsequent commits
to make this worth it.
Rename the get_categories() function to get_category_line(), since
that's what it's doing now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function get_categories() is invoked in a loop over all commands.
As it runs several processes, this takes an awful lot of time on
Windows. To reduce the number of processes, move the process that
filters empty lines to the other invoker of the function, where it is
needed. The invocation of get_categories() in the loop does not need
the empty line filtered away because the result is word-split by the
shell, which eliminates the empty line automatically.
Furthermore, use sort -u instead of sort | uniq to remove yet another
process.
[Ævar: on Linux this seems to speed things up a bit, although with
hyperfine(1) the results are fuzzy enough to land within the
confidence interval]:
$ git show HEAD~:generate-cmdlist.sh >generate-cmdlist.sh.old
$ hyperfine --warmup 1 -L s ,.old -p 'make clean' 'sh generate-cmdlist.sh{s} command-list.txt'
Benchmark #1: sh generate-cmdlist.sh command-list.txt
Time (mean ± σ): 371.3 ms ± 64.2 ms [User: 430.4 ms, System: 72.5 ms]
Range (min … max): 320.5 ms … 517.7 ms 10 runs
Benchmark #2: sh generate-cmdlist.sh.old command-list.txt
Time (mean ± σ): 489.9 ms ± 185.4 ms [User: 724.7 ms, System: 141.3 ms]
Range (min … max): 346.0 ms … 885.3 ms 10 runs
Summary
'sh generate-cmdlist.sh command-list.txt' ran
1.32 ± 0.55 times faster than 'sh generate-cmdlist.sh.old command-list.txt'
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add " " before a "|" at the end of a line in generate-cmdlist.sh for
consistency with other code in the file. Some of the surrounding code
will be modified in subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should keep these files sorted in the C locale, e.g. in the C
locale the order is:
git-check-mailmap
git-check-ref-format
git-checkout
But under en_US.UTF-8 it's:
git-check-mailmap
git-checkout
git-check-ref-format
In a subsequent commit I'll change generate-cmdlist.sh to use C sort
order, and without this change we'd be led to believe that that change
caused a meaningful change in the output, so let's do this as a
separate step, right now the generate-cmdlist.sh script just uses the
order found in this file.
Note that this refers to the sort order of the lines in
command-list.txt, a subsequent commit will also change how we treat
the sort order of the "category" fields, but that's unrelated to this
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If prepare_bitmap_git() returns NULL (one easy-to-trigger cause being
that the repository does not have bitmaps at all), then we'll segfault
accessing bitmap_git->hashes:
$ t/helper/test-tool bitmap dump-hashes
Segmentation fault
We should treat this the same as a repository with bitmaps but no
name-hashes, and quietly produce an empty output. The later call to
free_bitmap_index() in the cleanup label is OK, as it treats a NULL
pointer as a noop.
This isn't a big deal in practice, as this function is intended for and
used only by test-tool. It's probably worth fixing to avoid confusion,
but not worth adding coverage for this to the test suite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strftime() function has a non-standard "%s" extension, which prints
the number of seconds since the epoch. But the "struct tm" we get has
already been adjusted for a particular time zone; going back to an epoch
time requires knowing that zone offset. Since strftime() doesn't take
such an argument, round-tripping to a "struct tm" and back to the "%s"
format may produce the wrong value (off by tz_offset seconds).
Since we're already passing in the zone offset courtesy of c3fbf81a85
(strbuf: let strbuf_addftime handle %z and %Z itself, 2017-06-15), we
can use that same value to adjust our epoch seconds accordingly.
Note that the description above makes it sound like strftime()'s "%s" is
useless (and really, the issue is shared by mktime(), which is what
strftime() would use under the hood). But it gets the two cases for
which it's designed correct:
- the result of gmtime() will have a zero offset, so no adjustment is
necessary
- the result of localtime() will be offset by the local zone offset,
and mktime() and strftime() are defined to assume this offset when
converting back (there's actually some magic here; some
implementations record this in the "struct tm", but we can't
portably access or manipulate it. But they somehow "know" whether a
"struct tm" is from gmtime() or localtime()).
This latter point means that "format-local:%s" actually works correctly
already, because in that case we rely on the system routines due to
6eced3ec5e (date: use localtime() for "-local" time formats,
2017-06-15). Our problem comes when trying to show times in the author's
zone, as the system routines provide no mechanism for converting in
non-local zones. So in those cases we have a "struct tm" that came from
gmtime(), but has been manipulated according to our offset.
The tests cover the broken round-trip by formatting "%s" for a time in a
non-system timezone. We use the made-up "+1234" here, which has two
advantages. One, we know it won't ever be the real system zone (and so
we're actually testing a case that would break). And two, since it has a
minute component, we're testing the full decoding of the +HHMM zone into
a number of seconds. Likewise, we test the "-1234" variant to make sure
there aren't any sign mistakes.
There's one final test, which covers "format-local:%s". As noted, this
already passes, but it's important to check that we didn't regress this
case. In particular, the caller in show_date() is relying on localtime()
to have done the zone adjustment, independent of any tz_offset we
compute ourselves. These should match up, since our local_tzoffset() is
likewise built around localtime(). But it would be easy for a caller to
forget to pass in a correct tz_offset to strbuf_addftime(). Fortunately
show_date() does this correctly (it has to because of the existing
handling of %z), and the test continues to pass. So this one is just
future-proofing against a change in our assumptions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One CI task based on Fedora image noticed a not-quite-kosher
consturct recently, which has been corrected.
* vd/pthread-setspecific-g11-fix:
async_die_is_recursing: work around GCC v11.x issue on Fedora
One CI task based on Fedora image noticed a not-quite-kosher
consturct recently, which has been corrected.
* vd/pthread-setspecific-g11-fix:
async_die_is_recursing: work around GCC v11.x issue on Fedora
"git pull --no-verify" did not affect the underlying "git merge".
* ar/fix-git-pull-no-verify:
pull: honor --no-verify and do not call the commit-msg hook
As described in https://trojansource.codes/trojan-source.pdf, it is
possible to abuse directional formatting (a feature of Unicode) to
deceive human readers into interpreting code differently from compilers.
For example, an "if ()" expression could be enclosed in a comment, but
rendered as if it was outside of that comment. In effect, this could
fool a reviewer into misinterpreting the code flow as benign when it is
not.
It is highly unlikely that Git's source code wants to contain such
directional formatting in the first place, so let's just disallow it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fix corrects an issue found in the `dockerized(pedantic, fedora)` CI
build, first appearing after the introduction of a new version of the Fedora
docker image version. This image includes a version of `glibc` with the
attribute `__attr_access_none` added to `pthread_setspecific` [1], the
implementation of which only exists for GCC 11.X - the version included in
the Fedora image. The attribute requires that the pointer provided in the
second argument of `pthread_getspecific` must, if not NULL, be a pointer to
a valid object. In the usage in `async_die_is_recursing`, `(void *)1` is not
valid, causing the error.
This fix imitates a workaround added in SELinux [2] by using the pointer to
the static `async_die_counter` itself as the second argument to
`pthread_setspecific`. This guaranteed non-NULL, valid pointer matches the
intent of the current usage while not triggering the build error.
[1] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=a1561c3bbe8
[2] https://lore.kernel.org/all/20211021140519.6593-1-cgzones@googlemail.com/
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Victoria Dye <vdye@github.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:git/git:
Git 2.34-rc1
rebase -i: fix rewording with --committer-date-is-author-date
dir: fix directory-matching bug
gpg-interface: avoid buffer overrun in parse_ssh_output()
gpg-interface: handle missing " with " gracefully in parse_ssh_output()
A few more topics before -rc1
i18n: fix typos found during l10n for git 2.34.0
t5310: drop lib-bundle.sh include
format-patch (doc): clarify --base=auto
gc: perform incremental repack when implictly enabled
fsck: verify multi-pack-index when implictly enabled
fsck: verify commit graph when implicitly enabled
grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data
commit-graph: don't consider "replace" objects with "verify"
commit-graph tests: fix another graph_git_two_modes() helper
commit-graph tests: fix error-hiding graph_git_two_modes() helper
pretty: colorize pattern matches in commit messages
grep: refactor next_match() and match_one_pattern() for external use
Introduce the logical variable GIT_DEFAULT_BRANCH which represents the
the default branch name that will be used by "git init".
Currently this variable is equivalent to
git config init.defaultbranch || 'master'
This however will break if at one point the default branch is changed as
indicated by `default_branch_name_advice` in `refs.c`.
By providing this command ahead of time users of git can make their
code forward-compatible.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The filter system allows for alterations to file contents when they're
moved between the database and the worktree. We already made sure that
it is possible for smudge filters to produce contents that are larger
than `unsigned long` can represent (which matters on systems where
`unsigned long` is narrower than `size_t`, most notably 64-bit Windows).
Now we make sure that clean filters can _consume_ contents that are
larger than that.
Note that this commit only allows clean filters' _input_ to be larger
than can be represented by `unsigned long`.
This change makes only a very minute dent into the much larger project
to teach Git to use `size_t` instead of `unsigned long` wherever
appropriate.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces an additional guard for platforms where `unsigned long`
and `size_t` are not of the same size. If the size of an object in the
database would overflow `unsigned long`, instead we now exit with an
error.
A complete fix will have to update _many_ other functions throughout the
codebase to use `size_t` instead of `unsigned long`. It will have to be
implemented at some stage.
This commit puts in a stop-gap for the time being.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is mixed use of size_t and unsigned long to deal with sizes in the
codebase. Recall that Windows defines unsigned long as 32 bits even on
64-bit platforms, meaning that converting size_t to unsigned long narrows
the range. This mostly doesn't cause a problem since Git rarely deals
with files larger than 2^32 bytes.
But adjunct systems such as Git LFS, which use smudge/clean filters to
keep huge files out of the repository, may have huge file contents passed
through some of the functions in entry.c and convert.c. On Windows, this
results in a truncated file being written to the workdir. I traced this to
one specific use of unsigned long in write_entry (and a similar instance
in write_pc_item_to_fd for parallel checkout). That appeared to be for
the call to read_blob_entry, which expects a pointer to unsigned long.
By altering the signature of read_blob_entry to expect a size_t,
write_entry can be switched to use size_t internally (which all of its
callers and most of its callees already used). To avoid touching dozens of
additional files, read_blob_entry uses a local unsigned long to call a
chain of functions which aren't prepared to accept size_t.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The filter system allows for alterations to file contents when they're
added to the database or working tree. ("Smudge" when moving to the
working tree; "clean" when moving to the database.) This is used
natively to handle CRLF to LF conversions. It's also employed by Git-LFS
to replace large files from the working tree with small tracking files
in the repo and vice versa.
Git reads the entire smudged file into memory to convert it into a
"clean" form to be used in-core. While this is inefficient, there's a
more insidious problem on some platforms due to inconsistency between
using unsigned long and size_t for the same type of data (size of a file
in bytes). On most 64-bit platforms, unsigned long is 64 bits, and
size_t is typedef'd to unsigned long. On Windows, however, unsigned long
is only 32 bits (and therefore on 64-bit Windows, size_t is typedef'd to
unsigned long long in order to be 64 bits).
Practically speaking, this means 64-bit Windows users of Git-LFS can't
handle files larger than 2^32 bytes. Other 64-bit platforms don't suffer
this limitation.
This commit introduces a test exposing the issue; future commits make it
pass. The test simulates the way Git-LFS works by having a tiny file
checked into the repository and expanding it to a huge file on checkout.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow tests that assume a 64-bit `size_t` to be skipped in 32-bit
platforms and regardless of the size of `long`.
This imitates the `LONG_IS_64BIT` prerequisite.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this developer's tests, producing one gigabyte worth of NULs in a
busy loop that writes out individual bytes, unbuffered, took ~27sec.
Writing chunked 256kB buffers instead only took ~0.6sec
This matters because we are about to introduce a pair of test cases that
want to be able to produce 5GB of NULs, and we cannot use `/dev/zero`
because of the HP NonStop platform's lack of support for that device.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d5cfd142ec (tests: teach the test-tool to generate NUL bytes and
use it, 2019-02-14), add a way to generate zeroes in a portable
way without using /dev/zero (needed by HP NonStop), but uses a
long variable that is limited to 2^31 in Windows.
Use instead a (POSIX/C99) intmax_t that is at least 64bit wide
in 64-bit Windows to use in a future test.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
baf8ec8d3a (rebase -r: don't write .git/MERGE_MSG when
fast-forwarding, 2021-08-20) stopped reading the author script in
run_git_commit() when rewording a commit. This is normally safe
because "git commit --amend" preserves the authorship. However if the
user passes "--committer-date-is-author-date" then we need to read the
author date from the author script when rewording. Fix this regression
by tightening the check for when it is safe to skip reading the author
script.
Reported-by: Jonas Kittner <jonas.kittner@ruhr-uni-bochum.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts the change from ed49584 (dir: fix pattern matching on dirs,
2021-09-24), which claimed to fix a directory-matching problem without a
test case. It turns out to _create_ a bug, but it is a bit subtle.
The bug would have been revealed by the first of two tests being added to
t0008-ignores.sh. The first uses a pattern "/git/" inside the a/.gitignores
file, which matches against 'a/git/foo' but not 'a/git-foo/bar'. This test
would fail before the revert.
The second test shows what happens if the test instead uses a pattern "git/"
and this test passes both before and after the revert.
The difference in these two cases are due to how
last_matching_pattern_from_list() checks patterns both if they have the
PATTERN_FLAG_MUSTBEDIR and PATTERN_FLAG_NODIR flags. In the case of "git/",
the PATTERN_FLAG_NODIR is also provided, making the change in behavior in
match_pathname() not affect the end result of
last_matching_pattern_from_list().
Reported-by: Glen Choo <chooglen@google.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
