On Cygwin, "ulimit -s" does not report failure but it does not work
at all, which causes an unexpected success of some tests that
expect failures under a limited stack situation. This has been
fixed.
* rj/test-ulimit-on-windows:
t9010-*.sh: skip all tests if the PIPE prereq is missing
test-lib: use more compact expression in PIPE prerequisite
test-lib: don't use ulimit in test prerequisites on cygwin
A handful of tests to demonstrates a recursive implementation of
"name-rev" hurts.
* mg/name-rev-tests-with-short-stack:
t6120: test describe and name-rev with deep repos
t6120: clean up state after breaking repo
t6120: test name-rev --all and --stdin
t7004: move limited stack prereq to test-lib
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On cygwin (and MinGW), the 'ulimit' built-in bash command does not have
the desired effect of limiting the resources of new processes, at least
for the stack and file descriptors. However, it always returns success
and leads to several test prerequisites being erroneously set to true.
Add a check for cygwin and MinGW to the prerequisite expressions, using
a 'test_have_prereq !MINGW,!CYGWIN' clause, to guard against using ulimit.
This affects the prerequisite expressions for the ULIMIT_STACK_SIZE,
CMDLINE_LIMIT and ULIMIT_FILE_DESCRIPTORS prerequisites.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lazy prerequisite ULIMIT_STACK_SIZE is used only in t7004 so far.
Move it to test-lib.sh so that it can be used in other tests (which it will
be in a follow-up commit).
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already set ASAN_OPTIONS to abort if it finds any errors.
As we start to experiment with LSAN, the leak sanitizer,
it's convenient if we give it the same treatment.
Note that ASAN is actually a superset of LSAN and can do the
leak detection itself. So this only has an effect if you
specifically build with "make SANITIZE=leak" (leak detection
but not the rest of ASAN). Building with just LSAN results
in a build that runs much faster. That makes the
build-test-fix cycle more pleasant.
In the long run, once we've fixed or suppressed all the
leaks, it will probably be worth turning leak-detection on
for ASAN and just using that (to check both leaks _and_
memory errors in a single test run). But there's still a lot
of work before we get there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --verbose test option cannot be used with test harnesses
like "prove". Instead, you must use --verbose-log.
Since the --valgrind option implies --verbose, that means
that it cannot be used with prove. I.e., this does not work:
prove t0000-basic.sh :: --valgrind
You'd think it could be fixed by doing:
prove t0000-basic.sh :: --valgrind --verbose-log
but that doesn't work either, because the implied --verbose
takes precedence over --verbose-log. If the user has given
us a specific option, we should prefer that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sum(1) is a command for calculating checksums of the contents of files.
It was part of early editions of Unix ("Research Unix", 1972/1973, [1]).
cksum(1) appeared in 4.4BSD (1993) as a replacement [2], and became part
of POSIX.1-2008 [3]. OpenBSD 5.6 (2014) removed sum(1).
We only use sum(1) in t1002 to check for changes in three files. On
MinGW we use md5sum(1) instead. We could switch to the standard command
cksum(1) for all platforms; MinGW comes with GNU coreutils now, which
provides sum(1), cksum(1) and md5sum(1). Use our standard method for
checking for file changes instead: test_cmp.
It's more convenient because it shows differences nicely, it's faster on
MinGW because we have a special implementation there based only on
shell-internal commands, it's simpler as it allows us to avoid stripping
out unnecessary entries from the checksum file using grep(1), and it's
more consistent with the rest of the test suite.
We already compare changed files with their expected new contents using
diff(1), so we don't need to check with "test_must_fail test_cmp" if
they differ from their original state. A later patch could convert the
direct diff(1) calls to test_cmp as well.
With all sum(1) calls gone, remove the MinGW-specific implementation
from test-lib.sh as well.
[1] http://minnie.tuhs.org/cgi-bin/utree.pl?file=V3/man/man1/sum.1
[2] http://minnie.tuhs.org/cgi-bin/utree.pl?file=4.4BSD/usr/share/man/cat1/cksum.0
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/cksum.html
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long ago in 628522ec14 (sha1-lookup: more memory efficient
search in sorted list of SHA-1, 2007-12-29) we added
sha1_entry_pos(), a binary search that uses the uniform
distribution of sha1s to scale the selection of mid-points.
As this was a performance experiment, we tied it to the
GIT_USE_LOOKUP environment variable and never enabled it by
default.
This code was successful in reducing the number of steps in
each search. But the overhead of the scaling ends up making
it slower when the cache is warm. Here are best-of-five
timings for running rev-list on linux.git, which will have
to look up every object:
$ time git rev-list --objects --all >/dev/null
real 0m35.357s
user 0m35.016s
sys 0m0.340s
$ time GIT_USE_LOOKUP=1 git rev-list --objects --all >/dev/null
real 0m37.364s
user 0m37.045s
sys 0m0.316s
The USE_LOOKUP version might have more benefit on a cold
cache, as the time to fault in each page would dominate. But
that would be for a single lookup. In practice, most
operations tend to look up many objects, and the whole pack
.idx will end up warm.
It's possible that the code could be better optimized to
compete with a naive binary search for the warm-cache case,
and we could have the best of both worlds. But over the
years nobody has done so, and this is largely dead code that
is rarely run outside of the test suite. Let's drop it in
the name of simplicity.
This lets us remove sha1_entry_pos() entirely, as the .idx
lookup code was the only caller. Note that sha1-lookup.c
still contains sha1_pos(), which differs from
sha1_entry_pos() in two ways:
- it has a different interface; it uses a function pointer
to access sha1 entries rather than a size/offset pair
describing the table's memory layout
- it only scales the initial selection of "mi", rather
than each iteration of the search
We can't get rid of this function, as it's called from
several places. It may be that we could replace it with a
simple binary search, but that's out of scope for this patch
(and would need benchmarking).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure has been improved to allow building and testing
Git with address sanitizer more easily.
* jk/build-with-asan:
Makefile: disable unaligned loads with UBSan
Makefile: turn off -fomit-frame-pointer with sanitizers
Makefile: add helper for compiling with -fsanitize
test-lib: turn on ASan abort_on_error by default
test-lib: set ASAN_OPTIONS variable before we run git
By default, ASan will exit with code 1 when it sees an
error. This means we'll notice a problem when we expected
git to succeed, but not in a test_must_fail block.
Let's ask it to actually raise SIGABRT instead. That will
give us a signal death that test_must_fail will notice. As a
bonus, it may also leave a coredump, which can be handy for
digging into a failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We turn off ASan's leak detection by default in the test
suite because it's too noisy. But we don't do so until
part-way through test-lib. This is before we've run any
tests, but after we do our initial "./git" to see if the
binary has even been built.
When built with clang, this seems to work fine. However,
using "gcc -fsanitize=address", the leak checker seems to
complain more aggressively:
$ ./git
...
==5352==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x7f120e7afcf8 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.3+0xc1cf8)
#1 0x559fc2a3ce41 in do_xmalloc /home/peff/compile/git/wrapper.c:60
#2 0x559fc2a3cf1a in do_xmallocz /home/peff/compile/git/wrapper.c:100
#3 0x559fc2a3d0ad in xmallocz /home/peff/compile/git/wrapper.c:108
#4 0x559fc2a3d0ad in xmemdupz /home/peff/compile/git/wrapper.c:124
#5 0x559fc2a3d0ad in xstrndup /home/peff/compile/git/wrapper.c:130
#6 0x559fc274535a in main /home/peff/compile/git/common-main.c:39
#7 0x7f120dabd2b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
This is a leak in the sense that we never free it, but it's
in a global that is meant to last the whole program. So it's
not really interesting or in need of fixing. And at any
rate, mentioning leaks outside of the test_expect blocks is
certainly unwelcome, as it pollutes stderr.
Let's bump the setting of ASAN_OPTIONS higher in test-lib.sh
to catch our initial "can we even run git?" test. While
we're at it, we can add a comment to make it a bit less
inscrutable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "perl-compatible regular expression" support to enable JIT
and also allow linking with the newer PCRE v2 library.
* ab/pcre-v2:
grep: add support for PCRE v2
grep: un-break building with PCRE >= 8.32 without --enable-jit
grep: un-break building with PCRE < 8.20
grep: un-break building with PCRE < 8.32
grep: add support for the PCRE v1 JIT API
log: add -P as a synonym for --perl-regexp
grep: skip pthreads overhead when using one thread
grep: don't redundantly compile throwaway patterns under threading
The internal implementation of "git grep" has seen some clean-up.
* ab/grep-preparatory-cleanup: (31 commits)
grep: assert that threading is enabled when calling grep_{lock,unlock}
grep: given --threads with NO_PTHREADS=YesPlease, warn
pack-objects: fix buggy warning about threads
pack-objects & index-pack: add test for --threads warning
test-lib: add a PTHREADS prerequisite
grep: move is_fixed() earlier to avoid forward declaration
grep: change internal *pcre* variable & function names to be *pcre1*
grep: change the internal PCRE macro names to be PCRE1
grep: factor test for \0 in grep patterns into a function
grep: remove redundant regflags assignments
grep: catch a missing enum in switch statement
perf: add a comparison test of log --grep regex engines with -F
perf: add a comparison test of log --grep regex engines
perf: add a comparison test of grep regex engines with -F
perf: add a comparison test of grep regex engines
perf: emit progress output when unpacking & building
perf: add a GIT_PERF_MAKE_COMMAND for when *_MAKE_OPTS won't do
grep: add tests to fix blind spots with \0 patterns
grep: prepare for testing binary regexes containing rx metacharacters
grep: add a test helper function for less verbose -f \0 tests
...
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update to t5545-push-options.sh started skipping all the
tests in the script when a web server testing is disabled or
unavailable, not just the ones that require a web server. Non HTTP
tests have been salvaged to always run in this script.
* jc/skip-test-in-the-middle:
t5545: enhance test coverage when no http server is installed
test: allow skipping the remainder
Add a PTHREADS prerequisite which is false when git is compiled with
NO_PTHREADS=YesPlease.
There's lots of custom code that runs when threading isn't available,
but before this prerequisite there was no way to test it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the internal USE_LIBPCRE define, & build options flag to use a
naming convention ending in PCRE1, without changing the long-standing
USE_LIBPCRE Makefile flag which enables this code.
This is for preparation for libpcre2 support where having things like
USE_LIBPCRE and USE_LIBPCRE2 in any more places than we absolutely
need to for backwards compatibility with old Makefile arguments would
be confusing.
In some ways it would be better to change everything that now uses
USE_LIBPCRE to use USE_LIBPCRE1, and to make specifying
USE_LIBPCRE (or --with-pcre) an error. This would impose a one-time
burden on packagers of git to s/USE_LIBPCRE/USE_LIBPCRE1/ in their
build scripts.
However I'd like to leave the door open to making
USE_LIBPCRE=YesPlease eventually mean USE_LIBPCRE2=YesPlease,
i.e. once PCRE v2 is ubiquitous enough that it makes sense to make it
the default.
This code and the USE_LIBPCRE Makefile argument was added in commit
63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09). At the time there was
no indication that the PCRE project would release an entirely new &
incompatible API around 3 years later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the LIBPCRE prerequisite to PCRE. This is for preparation for
libpcre2 support, where having just "LIBPCRE" would be confusing as it
implies v1 of the library.
None of these tests are incompatible between versions 1 & 2 of
libpcre, it's less confusing to give them a more general name to make
it clear that they work on both library versions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because TAP output does not like to see the remainder of the test
getting skipped after running one or more tests, bf4b7219
("test-lib.sh: Add check for invalid use of 'skip_all' facility",
2012-09-01) made sure that test_done errors out when this happens.
Instead, loosen the check so that we only pretend that the rest of
the test script did not exist in such a case. We'd lose a bit of
information (i.e. TAP does not notice that we are skipping some
tests), but not very much (i.e. TAP wasn't told how many tests are
skipped anyway).
This will allow inclusion of lib-httpd.sh in the middle of a test,
which will skip the remainder of the test scripts when tests that
involve web server are declined with GIT_TEST_HTTPD=false, for
example.
Acked-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
Attempt to allow us notice "fishy" situation where we fail to
remove the temporary directory used during the test.
* dt/gc-ignore-old-gc-logs:
test-lib: retire $remove_trash variable
test-lib.sh: do not barf under --debug at the end of the test
test-lib: abort when can't remove trash directory
The convention "$remove_trash is set to the trash directory that is
used during the test, so that it will be removed at the end, but
under --debug option we set the varilable to empty string to
preserve the directory" made sense back when it was introduced, as
there was no $TRASH_DIRECTORY variable. These days, since no tests
looks at the variable, it is obscure and even risks that by mistake
the variable gets used for something else (e.g. remove_trash=yes)
and cause us misbehave. Worse yet, remove_trash was not initialized
to an empty string at the beginning, so a stray environment variable
the user has could have affected the logic when "--debug" is in use.
Rewrite the clean-up sequence in test_done helper to explicitly
check the $debug condition and remove the trash directory using
the $TRASH_DIRECTORY variable.
Note that "go to the directory one level above the trash and then
remove it" is kept and this is deliverate; test_at_end_hook_ will
keep running from the expected location, and also some platforms may
not like a directory that is serving as the $cwd of a still-active
process removed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original did "does $remove_trash exist? Then go one level above
and remove it". There was no problem under "--debug", where
the variable is left empty, as the first "test -d $remove_trash" would
have said "No, it doesn't".
With the check implemented in the previous step, we'd always get an
error under "--debug".
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had two similar bugs in the tests sporadically triggering error
messages during the removal of the trash directory, see commits
bb05510e5 (t5510: run auto-gc in the foreground, 2016-05-01) and
ef09036cf (t6500: wait for detached auto gc at the end of the test
script, 2017-04-13). The test script succeeded nonetheless, because
these errors are ignored during housekeeping in 'test_done'.
However, such an error is a sign that something is fishy in the test
script. Print an error message and abort the test script when the
trash directory can't be removed successfully or is already removed,
because that's unexpected and we would prefer somebody notice and
figure out why.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code refers to timestamps as unsigned long, which is
ill-defined, as there is no guarantee about the number of bits that
data type has.
In preparation of switching to another data type that is large enough
to hold "far in the future" dates, we need to prepare the t0006-date.sh
script for the case where we *still* cannot format those dates if the
system library uses 32-bit time_t.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code refers to timestamps as unsigned longs. On 32-bit
platforms, as well as on Windows, unsigned long is not large enough to
capture dates that are "absurdly far in the future".
It is perfectly valid by the C standard, of course, for the `long` data
type to refer to 32-bit integers. That is why the `time_t` data type
exists: so that it can be 64-bit even if `long` is 32-bit. Git's source
code simply uses an incorrect data type for timestamps, is all.
The earlier quick fix 6b9c38e14c (t0006: skip "far in the future" test
when unsigned long is not long enough, 2016-07-11) papered over this
issue simply by skipping the respective test cases on platforms where
they would fail due to the data type in use.
This quick fix, however, tests for *long* to be 64-bit or not. What we
need, though, is a test that says whether *whatever data type we use for
timestamps* is 64-bit or not.
The same quick fix was used to handle the similar problem where Git's
source code uses `unsigned long` to represent size, instead of `size_t`,
conflating the two issues.
So let's just add another prerequisite to test specifically whether
timestamps are represented by a 64-bit data type or not. Later, after we
switch to a larger data type, we can flip that prerequisite to test
`time_t` instead of `long`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We found a few run-away here documents that are started with an
end-of-here-doc marker that is incorrectly spelled, e.g.
git some command >actual &&
cat <<EOF >expect
...
EOF &&
test_cmp expect actual
which ends up slurping the entire remainder of the script as if it
were the data. Often the command that gets misused like this exits
without failure (e.g. "cat" in the above example), which makes the
command appear to work, without ever executing the remainder of the
test.
Piggy-back on the test that catches &&-chain breakage to detect this
case as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'debug' test helper is supposed to facilitate debugging by running
a command of the test suite under gdb. Unfortunately, its usefulness
is severely limited, because that gdb session is not interactive,
since the test's, and thus gdb's standard input is redirected from
/dev/null (for a good reason, see 781f76b15 (test-lib: redirect stdin
of tests, 2011-12-15)).
Redirect gdb's standard file descriptors from/to the test
environment's stdin, stdout and stderr in the 'debug' helper, thus
creating an interactive gdb session (even in non-verbose mode), which
is much, much more useful.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong reported that while FreeBSD has a /usr/bin/unzip, it uses
different semantics from those that are needed by Git's tests: When
passing the -a option to Info-Zip, it heeds the text attribute of the
.zip file's central directory, while FreeBSD's unzip ignores that
attribute.
The common work-around is to install Info-Zip on FreeBSD, into
/usr/local/bin/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the test framework made in 2.9 timeframe broke running
the tests under valgrind, which has been fixed.
* nd/test-helpers:
valgrind: support test helpers
Update to the test framework made in 2.9 timeframe broke running
the tests under valgrind, which has been fixed.
* nd/test-helpers:
valgrind: support test helpers
The Travis CI configuration we ship ran the tests with --verbose
option but this risks non-TAP output that happens to be "ok" to be
misinterpreted as TAP signalling a test that passed. This resulted
in unnecessary failure. This has been corrected by introducing a
new mode to run our tests in the test harness to send the verbose
output separately to the log file.
* jk/tap-verbose-fix:
test-lib: bail out when "-v" used under "prove"
travis: use --verbose-log test option
test-lib: add --verbose-log option
test-lib: handle TEST_OUTPUT_DIRECTORY with spaces
Tests run with --valgrind call git commands through a wrapper script
that invokes valgrind on them. This script (valgrind.sh) is in turn
invoked through symlinks created for each command in t/valgrind/bin/.
Since e6e7530d (test helpers: move test-* to t/helper/ subdirectory)
these symlinks have been broken for test helpers -- they point to the
old locations in the root of the build directory. Fix that by teaching
the code for creating the links about the new location of the binaries,
and do the same in the wrapper script to allow it to find its payload.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Travis CI configuration we ship ran the tests with --verbose
option but this risks non-TAP output that happens to be "ok" to be
misinterpreted as TAP signalling a test that passed. This resulted
in unnecessary failure. This has been corrected by introducing a
new mode to run our tests in the test harness to send the verbose
output separately to the log file.
* jk/tap-verbose-fix:
test-lib: bail out when "-v" used under "prove"
travis: use --verbose-log test option
test-lib: add --verbose-log option
test-lib: handle TEST_OUTPUT_DIRECTORY with spaces
When there is a TAP harness consuming the output of our test
scripts, the "--verbose" breaks the output by mingling
test command output with TAP. Because the TAP::Harness
module used by "prove" is fairly lenient, this _usually_
works, but it violates the spec, and things get very
confusing if the commands happen to output a line that looks
like TAP (e.g., the word "ok" on its own line).
Let's detect this situation and complain. Just calling
error() isn't great, though; prove will tell us that the
script failed, but the message doesn't make it through to
the user. Instead, we can use the special TAP signal "Bail
out!". This not only shows the message to the user, but
instructs the harness to stop running the tests entirely.
This is exactly what we want here, as the problem is in the
command-line options, and every test script would produce
the same error.
The result looks like this (the first "Bailout called" line
is in red if prove uses color on your terminal):
$ make GIT_TEST_OPTS='--verbose --tee'
rm -f -r 'test-results'
*** prove ***
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
Makefile:39: recipe for target 'prove' failed
make: *** [prove] Error 255
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--verbose" option redirects output from arbitrary
test commands to stdout. This is useful for examining the
output manually, like:
./t5547-push-quarantine.sh -v | less
But it also means that the output is intermingled with the
TAP directives, which can confuse a TAP parser like "prove".
This has always been a potential problem, but became an
issue recently when one test happened to output the word
"ok" on a line by itself, which prove interprets as a test
success:
$ prove t5547-push-quarantine.sh :: -v
t5547-push-quarantine.sh .. 1/? To dest.git
* [new branch] HEAD -> master
To dest.git
! [remote rejected] reject -> reject (pre-receive hook declined)
error: failed to push some refs to 'dest.git'
fatal: git cat-file d08c8eba97f4e683ece08654c7c8d2ba0c03b129: bad file
t5547-push-quarantine.sh .. Failed -1/4 subtests
Test Summary Report
-------------------
t5547-push-quarantine.sh (Wstat: 0 Tests: 5 Failed: 0)
Parse errors: Tests out of sequence. Found (2) but expected (3)
Tests out of sequence. Found (3) but expected (4)
Tests out of sequence. Found (4) but expected (5)
Bad plan. You planned 4 tests but ran 5.
Files=1, Tests=5, 0 wallclock secs ( 0.01 usr + 0.01 sys = 0.02 CPU)
Result: FAIL
One answer is "if it hurts, don't do it", but that's not
quite the whole story. The Travis tests use "--verbose
--tee" so that they can get the benefit of prove's parallel
options, along with a verbose log in case there is a
failure. We just need the verbose output to go to the log,
but keep stdout clean.
Getting this right turns out to be surprisingly difficult.
Here's the progression of alternatives I considered:
1. Add an option to write verbose output to stderr. This is
hard to capture, though, because we want each test to
have its own log (because they're all run in parallel
and the jumbled output would be useless).
2. Add an option to write verbose output to a file in
test-results. This works, but the log is missing all of
the non-verbose output, which gives context.
3. Like (2), but teach say_color() to additionally output
to the log. This mostly works, but misses any output
that happens outside of the say() functions (which isn't
a lot, but is a potential maintenance headache).
4. Like (2), but make the log file the same as the "--tee"
file. That almost works, but now we have two processes
opening the same file. That gives us two separate
descriptors, each with their own idea of the current
position. They'll each start writing at offset 0, and
overwrite each other's data.
5. Like (4), but in each case open the file for appending.
That atomically positions each write at the end of the
file.
It's possible we may still get sheared writes between
the two processes, but this is already the case when
writing to stdout. It's not a problem in practice
because the test harness generally waits for snippets to
finish before writing the TAP output.
We can ignore buffering issues with tee, because POSIX
mandates that it does not buffer. Likewise, POSIX
specifies "tee -a", so it should be available
everywhere.
This patch implements option (5), which seems to work well
in practice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are careful in test_done to handle a results directory
with a space in it, but the "--tee" code path does not.
Doing:
export TEST_OUTPUT_DIRECTORY='/tmp/path with spaces'
./t000-init.sh --tee
results in errors. Let's consistently double-quote our path
variables so that this works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
JGit can show a fake ref "capabilities^{}" to "git fetch" when it
does not advertise any refs, but "git fetch" was not prepared to
see such an advertisement. When the other side disconnects without
giving any ref advertisement, we used to say "there may not be a
repository at that URL", but we may have seen other advertisement
like "shallow" and ".have" in which case we definitely know that a
repository is there. The code to detect this case has also been
updated.
* jt/accept-capability-advertisement-when-fetching-from-void:
connect: advertized capability is not a ref
connect: tighten check for unexpected early hang up
tests: move test_lazy_prereq JGIT to test-lib.sh
Update a few tests that used to use GIT_CURL_VERBOSE to use the
newer GIT_TRACE_CURL.
* ep/use-git-trace-curl-in-tests:
t5551-http-fetch-smart.sh: use the GIT_TRACE_CURL environment var
t5550-http-fetch-dumb.sh: use the GIT_TRACE_CURL environment var
test-lib.sh: preserve GIT_TRACE_CURL from the environment
t5541-http-push-smart.sh: use the GIT_TRACE_CURL environment var
Update a few tests that used to use GIT_CURL_VERBOSE to use the
newer GIT_TRACE_CURL.
* ep/use-git-trace-curl-in-tests:
t5551-http-fetch-smart.sh: use the GIT_TRACE_CURL environment var
t5550-http-fetch-dumb.sh: use the GIT_TRACE_CURL environment var
test-lib.sh: preserve GIT_TRACE_CURL from the environment
t5541-http-push-smart.sh: use the GIT_TRACE_CURL environment var
This enables JGIT to be used as a prereq in invocations of
test_expect_success (and other functions) in other test scripts.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turning on this variable can be useful when debugging http
tests. It can break a few tests in t5541 if not set
to an absolute path but it is not a variable
that the user is likely to have enabled accidentally.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each test run generates a "count" file in t/test-results
that stores the number of successful, failed, etc tests.
If you run "t1234-foo.sh", that file is named as
"t/test-results/t1234-foo-$$.count"
The addition of the PID there is serving no purpose, and
makes analysis of the count files harder.
The presence of the PID dates back to 2d84e9f (Modify
test-lib.sh to output stats to t/test-results/*,
2008-06-08), but no reasoning is given there. Looking at the
current code, we can see that other files we write to
test-results (like *.exit and *.out) do _not_ have the PID
included. So the presence of the PID does not meaningfully
allow one to store the results from multiple runs anyway.
Moreover, anybody wishing to read the *.count files to
aggregate results has to deal with the presence of multiple
files for a given test (and figure out which one is the most
recent based on their timestamps!). The only consumer of
these files is the aggregate.sh script, which arguably gets
this wrong. If a test is run multiple times, its counts will
appear multiple times in the total (I say arguably only
because the desired semantics aren't documented anywhere,
but I have trouble seeing how this behavior could be
useful).
So let's just drop the PID, which fixes aggregate.sh, and
will make new features based around the count files easier
to write.
Note that since the count-file may already exist (when
re-running a test), we also switch the "cat" from appending
to truncating. The use of append here was pointless in the
first place, as we expected to always write to a unique file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build clean-up.
* nd/test-helpers:
t/test-lib.sh: fix running tests with --valgrind
Makefile: use VCSSVN_LIB to refer to svn library
Makefile: drop extra dependencies for test helpers
"git add -N dir/file && git write-tree" produced an incorrect tree
when there are other paths in the same directory that sorts after
"file".
* nd/cache-tree-ita:
cache-tree: do not generate empty trees as a result of all i-t-a subentries
cache-tree.c: fix i-t-a entry skipping directory updates sometimes
test-lib.sh: introduce and use $EMPTY_BLOB
test-lib.sh: introduce and use $EMPTY_TREE
"git add -N dir/file && git write-tree" produced an incorrect tree
when there are other paths in the same directory that sorts after
"file".
* nd/cache-tree-ita:
cache-tree: do not generate empty trees as a result of all i-t-a subentries
cache-tree.c: fix i-t-a entry skipping directory updates sometimes
test-lib.sh: introduce and use $EMPTY_BLOB
test-lib.sh: introduce and use $EMPTY_TREE
