"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
When set in the environment, GIT_TRACE_REFS makes git print operations and
results as they flow through the ref storage backend. This helps debug
discrepancies between different ref backends.
Example:
$ GIT_TRACE_REFS="1" ./git branch
15:42:09.769631 refs/debug.c:26 ref_store for .git
15:42:09.769681 refs/debug.c:249 read_raw_ref: HEAD: 0000000000000000000000000000000000000000 (=> refs/heads/ref-debug) type 1: 0
15:42:09.769695 refs/debug.c:249 read_raw_ref: refs/heads/ref-debug: 3a238e539b (=> refs/heads/ref-debug) type 0: 0
15:42:09.770282 refs/debug.c:233 ref_iterator_begin: refs/heads/ (0x1)
15:42:09.770290 refs/debug.c:189 iterator_advance: refs/heads/b4 (0)
15:42:09.770295 refs/debug.c:189 iterator_advance: refs/heads/branch3 (0)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it clear that dwim_ref() is just repo_dwim_ref() without the
first parameter.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a future patch adding a boolean parameter to
repo_interpret_branch_name(), which might be easily confused with an
existing unsigned int parameter, refactor repo_interpret_branch_name()
to take an option struct instead of the unsigned int parameter.
The static function interpret_branch_mark() is also updated to take the
option struct in preparation for that future patch, since it will also
make use of the to-be-introduced boolean parameter.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accesses to two pseudorefs have been updated to properly use ref
API.
* hn/refs-pseudorefs:
sequencer: treat REVERT_HEAD as a pseudo ref
builtin/commit: suggest update-ref for pseudoref removal
sequencer: treat CHERRY_PICK_HEAD as a pseudo ref
refs: make refs_ref_exists public
The FETCH_HEAD is now always read from the filesystem regardless of
the ref backend in use, as its format is much richer than the
normal refs, and written directly by "git fetch" as a plain file..
* hn/refs-fetch-head-is-special:
refs: read FETCH_HEAD and MERGE_HEAD generically
refs: move gitdir into base ref_store
refs: fix comment about submodule ref_stores
refs: split off reading loose ref data in separate function
When adding the reference-transaction hook, there were concerns about
the performance impact it may have on setups which do not make use of
the new hook at all. After all, it gets executed every time a reftx is
prepared, committed or aborted, which linearly scales with the number of
reference-transactions created per session. And as there are code paths
like `git push` which create a new transaction for each reference to be
updated, this may translate to calling `find_hook()` quite a lot.
To address this concern, a cache was added with the intention to not
repeatedly do negative hook lookups. Turns out this cache caused a
regression, which was fixed via e5256c82e5 (refs: fix interleaving hook
calls with reference-transaction hook, 2020-08-07). In the process of
discussing the fix, we realized that the cache doesn't really help even
in the negative-lookup case. While performance tests added to benchmark
this did show a slight improvement in the 1% range, this really doesn't
warrent having a cache. Furthermore, it's quite flaky, too. E.g. running
it twice in succession produces the following results:
Test master pks-reftx-hook-remove-cache
--------------------------------------------------------------------------
1400.2: update-ref 2.79(2.16+0.74) 2.73(2.12+0.71) -2.2%
1400.3: update-ref --stdin 0.22(0.08+0.14) 0.21(0.08+0.12) -4.5%
Test master pks-reftx-hook-remove-cache
--------------------------------------------------------------------------
1400.2: update-ref 2.70(2.09+0.72) 2.74(2.13+0.71) +1.5%
1400.3: update-ref --stdin 0.21(0.10+0.10) 0.21(0.08+0.13) +0.0%
One case notably absent from those benchmarks is a single executable
searching for the hook hundreds of times, which is exactly the case for
which the negative cache was added. p1400.2 will spawn a new update-ref
for each transaction and p1400.3 only has a single reference-transaction
for all reference updates. So this commit adds a third benchmark, which
performs an non-atomic push of a thousand references. This will create a
new reference transaction per reference. But even for this case, the
negative cache doesn't consistently improve performance:
Test master pks-reftx-hook-remove-cache
--------------------------------------------------------------------------
1400.4: nonatomic push 6.63(6.50+0.13) 6.81(6.67+0.14) +2.7%
1400.4: nonatomic push 6.35(6.21+0.14) 6.39(6.23+0.16) +0.6%
1400.4: nonatomic push 6.43(6.31+0.13) 6.42(6.28+0.15) -0.2%
So let's just remove the cache altogether to simplify the code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will be necessary to replace file existence checks for pseudorefs.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FETCH_HEAD and MERGE_HEAD refs must be stored in a file, regardless of the
type of ref backend. This is because they can hold more than just a single ref.
To accomodate them for alternate ref backends, read them from a file generically
in refs_read_raw_ref()
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further preliminary change to refs API.
* hn/reftable-prep-part-2:
Make HEAD a PSEUDOREF rather than PER_WORKTREE.
Modify pseudo refs through ref backend storage
t1400: use git rev-parse for testing PSEUDOREF existence
The logic to find the ref transaction hook script attempted to
cache the path to the found hook without realizing that it needed
to keep a copied value, as the API it used returned a transitory
buffer space. This has been corrected.
* ps/ref-transaction-hook:
t1416: avoid hard-coded sha1 ids
refs: fix interleaving hook calls with reference-transaction hook
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
In order to not repeatedly search for the reference-transaction hook in
case it's getting called multiple times, we use a caching mechanism to
only call `find_hook()` once. What was missed though is that the return
value of `find_hook()` actually comes from a static strbuf, which means
it will get overwritten when calling `find_hook()` again. As a result,
we may call the wrong hook with parameters of the reference-transaction
hook.
This scenario was spotted in the wild when executing a git-push(1) with
multiple references, where there are interleaving calls to both the
update and the reference-transaction hook. While initial calls to the
reference-transaction hook work as expected, it will stop working after
the next invocation of the update hook. The result is that we now start
calling the update hook with parameters and stdin of the
reference-transaction hook.
This commit fixes the issue by storing a copy of `find_hook()`'s return
value in the cache.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
523fa69c (reflog: cleanse messages in the refs.c layer, 2020-07-10)
centralized reflog normalizaton. However, the normalizaton added a
leading "\t" to the message. This is an artifact of the reflog
storage format in the files backend, so it should be added there.
Routines that parse back the reflog (such as grab_nth_branch_switch)
expect the "\t" to not be in the message, so without this fix, git
with reftable cannot process the "@{-1}" syntax.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preliminary clean-up of the refs API in preparation for adding a
new refs backend "reftable".
* hn/reftable:
reflog: cleanse messages in the refs.c layer
bisect: treat BISECT_HEAD as a pseudo ref
t3432: use git-reflog to inspect the reflog for HEAD
lib-t6000.sh: write tag using git-update-ref
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is consistent with the definition of REF_TYPE_PSEUDOREF
(uppercase in the root ref namespace).
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous behavior was introduced in commit 74ec19d4be
("pseudorefs: create and use pseudoref update and delete functions",
Jul 31, 2015), with the justification "alternate ref backends still
need to store pseudorefs in GIT_DIR".
Refs such as REBASE_HEAD are read through the ref backend. This can
only work consistently if they are written through the ref backend as
well. Tooling that works directly on files under .git should be
updated to use git commands to read refs instead.
The following behaviors change:
* Updates to pseudorefs (eg. ORIG_HEAD) with
core.logAllRefUpdates=always will create reflogs for the pseudoref.
* non-HEAD pseudoref symrefs are also dereferenced on deletion. Update
t1405 accordingly.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regarding reflog messages:
- We expect that a reflog message consists of a single line. The
file format used by the files backend may add a LF after the
message as a delimiter, and output by commands like "git log -g"
may complete such an incomplete line by adding a LF at the end,
but philosophically, the terminating LF is not a part of the
message.
- We however allow callers of refs API to supply a random sequence
of NUL terminated bytes. We cleanse caller-supplied message by
squashing a run of whitespaces into a SP, and by trimming trailing
whitespace, before storing the message. This is how we tolerate,
instead of erring out, a message with LF in it (be it at the end,
in the middle, or both).
Currently, the cleansing of the reflog message is done by the files
backend, before the log is written out. This is sufficient with the
current code, as that is the only backend that writes reflogs. But
new backends can be added that write reflogs, and we'd want the
resulting log message we would read out of "log -g" the same no
matter what backend is used, and moving the code to do so to the
generic layer is a way to do so.
An added benefit is that the "cleansing" function could be updated
later, independent from individual backends, to e.g. allow
multi-line log messages if we wanted to, and when that happens, it
would help a lot to ensure we covered all bases if the cleansing
function (which would be updated) is called from the generic layer.
Side note: I am not interested in supporting multi-line reflog
messages right at the moment (nobody is asking for it), but I
envision that instead of the "squash a run of whitespaces into a SP
and rtrim" cleansing, we can %urlencode problematic bytes in the
message *AND* append a SP at the end, when a new version of Git that
supports multi-line and/or verbatim reflog messages writes a reflog
record. The reading side can detect the presense of SP at the end
(which should have been rtrimmed out if it were written by existing
versions of Git) as a signal that decoding %urlencode recovers the
original reflog message.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
A few fields in "struct commit" that do not have to always be
present have been moved to commit slabs.
* ak/commit-graph-to-slab:
commit-graph: minimize commit_graph_data_slab access
commit: move members graph_pos, generation to a slab
commit-graph: introduce commit_graph_data_slab
object: drop parsed_object_pool->commit_count
We just introduced the command-line option
`--initial-branch=<branch-name>` to allow initializing a new repository
with a different initial branch than the hard-coded one.
To allow users to override the initial branch name more permanently
(i.e. without having to specify the name manually for each and every
`git init` invocation), let's introduce the `init.defaultBranch` config
setting.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Don Goodman-Wilson <don@goodman-wilson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The low-level reference transactions used to update references are
currently completely opaque to the user. While certainly desirable in
most usecases, there are some which might want to hook into the
transaction to observe all queued reference updates as well as observing
the abortion or commit of a prepared transaction.
One such usecase would be to have a set of replicas of a given Git
repository, where we perform Git operations on all of the repositories
at once and expect the outcome to be the same in all of them. While
there exist hooks already for a certain subset of Git commands that
could be used to implement a voting mechanism for this, many others
currently don't have any mechanism for this.
The above scenario is the motivation for the new "reference-transaction"
hook that reaches directly into Git's reference transaction mechanism.
The hook receives as parameter the current state the transaction was
moved to ("prepared", "committed" or "aborted") and gets via its
standard input all queued reference updates. While the exit code gets
ignored in the "committed" and "aborted" states, a non-zero exit code in
the "prepared" state will cause the transaction to be aborted
prematurely.
Given the usecase described above, a voting mechanism can now be
implemented via this hook: as soon as it gets called, it will take all
of stdin and use it to cast a vote to a central service. When all
replicas of the repository agree, the hook will exit with zero,
otherwise it will abort the transaction by returning non-zero. The most
important upside is that this will catch _all_ commands writing
references at once, allowing to implement strong consistency for
reference updates via a single mechanism.
In order to test the impact on the case where we don't have any
"reference-transaction" hook installed in the repository, this commit
introduce two new performance tests for git-update-refs(1). Run against
an empty repository, it produces the following results:
Test origin/master HEAD
--------------------------------------------------------------------
1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4%
1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0%
The performance test p1400.2 creates, updates and deletes a branch a
thousand times, thus averaging runtime of git-update-refs over 3000
invocations. p1400.3 instead calls `git-update-refs --stdin` three times
and queues a thousand creations, updates and deletes respectively.
As expected, p1400.3 consistently shows no noticeable impact, as for
each batch of updates there's a single call to access(3P) for the
negative hook lookup. On the other hand, for p1400.2, one can see an
impact caused by this patchset. But doing five runs of the performance
tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead
ranged from -1.5% to +1.1%. These inconsistent performance numbers can
be explained by the overhead of spawning 3000 processes. This shows that
the overhead of assembling the hook path and executing access(3P) once
to check if it's there is mostly outweighed by the operating system's
overhead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14ba97f8 (alloc: allow arbitrary repositories for alloc functions,
2018-05-15) introduced parsed_object_pool->commit_count to keep count of
commits per repository and was used to assign commit->index.
However, commit-slab code requires commit->index values to be unique
and a global count would be correct, rather than a per-repo count.
Let's introduce a static counter variable, `parsed_commits_count` to
keep track of parsed commits so far.
As commit_count has no use anymore, let's also drop it from the struct.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--decorate-refs" and "--decorate-refs-exclude" options "git
log" takes have learned a companion configuration variable
log.excludeDecoration that sits at the lowest priority in the
family.
* ds/log-exclude-decoration-config:
log: add log.excludeDecoration config option
log-tree: make ref_filter_match() a helper method
We've left the command line parsing of "git log :/a/b/" broken for
about a full year without anybody noticing, which has been
corrected.
* jc/missing-ref-store-fix:
repository: mark the "refs" pointer as private
sha1-name: do not assume that the ref store is initialized
The ref_filter_match() method is defined in refs.h and implemented
in refs.c, but is only used by add_ref_decoration() in log-tree.c.
Move it into that file as a static helper method. The
match_ref_pattern() comes along for the ride.
While moving the code, also make a slight adjustment to have
ref_filter_match() take a struct decoration_filter pointer instead
of multiple string lists. This is non-functional, but will make a
later change be much cleaner.
The diff is easier to parse when using the --color-moved option.
Reported-by: Junio C Hamano <gister@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "refs" pointer in a struct repository starts life as NULL, but then
is lazily initialized when it is accessed via get_main_ref_store().
However, it's easy for calling code to forget this and access it
directly, leading to code which works _some_ of the time, but fails if
it is called before anybody else accesses the refs.
This was the cause of the bug fixed by 5ff4b920eb (sha1-name: do not
assume that the ref store is initialized, 2020-04-09). In order to
prevent similar bugs, let's more clearly mark the "refs" field as
private.
In addition to helping future code, the name change will help us audit
any existing direct uses. Besides get_main_ref_store() itself, it turns
out there is only one. But we know it's OK as it is on the line directly
after the fix from 5ff4b920eb, which will have initialized the pointer.
However it's still a good idea for it to model the proper use of the
accessing function, so we'll convert it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comments stating that "struct hashmap_entry" must be the first
member in a struct are no longer valid.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of lookup_unknown_object() that aren't just
passing us the "hash" member of a "struct object_id". Let's take the
whole struct, which gets us closer to removing all raw sha1 variables.
It also matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In recent versions of Git, per-worktree refs are exposed in
refs/worktrees/<wtname>/ hierarchy, which means that worktree names
must be a valid refname component. The code now sanitizes the names
given to worktrees, to make sure these refs are well-formed.
* nd/worktree-name-sanitization:
worktree add: sanitize worktree names
Worktree names are based on $(basename $GIT_WORK_TREE). They aren't
significant until 3a3b9d8cde (refs: new ref types to make per-worktree
refs visible to all worktrees - 2018-10-21), where worktree name could
be part of a refname and must follow refname rules.
Update 'worktree add' code to remove special characters to follow
these rules. In the future the user will be able to specify the
worktree name by themselves if they're not happy with this dumb
character substitution.
Reported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only remaining callers of has_sha1_file() actually have an object_id
already. They can use the "object" variant, rather than dereferencing
the hash themselves.
The code changes here were completely generated by the included
coccinelle patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"rev-parse --exclude=<pattern> --branches=<pattern>" etc. did not
quite work, which has been corrected.
* ra/rev-parse-exclude-glob:
refs: fix some exclude patterns being ignored
refs: show --exclude failure with --branches/tags/remotes=glob
