"git am" learned the "--include" option, which is an opposite of existing
the "--exclude" option.
By Johannes Berg
* jb/am-include:
am: support --include option
It can be convenient to push many strings in a single line
(e.g., if you are initializing an array with defaults). This
patch provides a convenience wrapper to allow this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git commit --template F" errors out because the user did not touch
the message, it claimed that it aborts due to "empty message", which was
utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
Even with "-q"uiet option, "checkout" used to report setting up tracking.
Also "branch" learns "-q"uiet option to squelch informational message.
By Jeff King
* jk/branch-quiet:
teach "git branch" a --quiet option
checkout: suppress tracking message with "-q"
If fast-import's command pipe and the frontend's cat-blob/ls response
pipe are both filled, there can be a deadlock. Luckily all existing
frontends consume any pending cat-blob/ls responses completely before
writing the next command.
Document the requirements so future frontend authors and users can be
spared from the problem, too. It is not always easy to catch that
kind of bug by testing.
To set the scene, add some words of explanation to help the novice
understand that "cat-blob" and "ls" output are meant for consumption
by the frontend.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git cherry-pick fails when picking a non-ff commit that is empty. The advice
given with the failure is that a git-commit --allow-empty should be issued to
explicitly add the empty commit during the cherry pick. This option allows a
user to specify before hand that they want to keep the empty commit. This
eliminates the need to issue both a cherry pick and a commit operation.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I tentatively named the release notes "1.7.11" but this may have to
be renamed to "1.8" or some other name later. Let's see how well
we would do during this cycle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing label import code looks at each commit being
imported, and then checks for labels at that commit. This
doesn't work in the real world though because it will drop
labels applied on changelists that have already been imported,
a common pattern.
This change adds a new --import-labels option. With this option,
at the end of the sync, git p4 gets sets of labels in p4 and git,
and then creates a git tag for each missing p4 label.
This means that tags created on older changelists are
still imported.
Tags that could not be imported are added to an ignore
list.
The same sets of git and p4 tags and labels can also be used to
derive a list of git tags to export to p4. This is enabled with
--export-labels in 'git p4 submit'.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the default pager and editor chosen at compile time in the
git-var(1) manpage so users curious about what command _this_ copy of
git will fall back to when EDITOR, VISUAL, and PAGER are unset can
find the answer quickly.
In builds leaving those settings uncustomized, this patch makes the
manpage continue to say "usually vi" and "usually less" so the
formatted documentation is usable for a wide audience including users
of custom builds that change those settings. If you would like your
copy of the docs to be less noncommittal, you will need to set
DEFAULT_PAGER=less and DEFAULT_EDITOR=vi explicitly.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
With the "--index-version <n>" parameter, write the index out in the
specified version. With this, an index file that is written in newer
format (say v4) can be downgraded to be read by older versions of Git.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "commit -t <file>" said the file is used "as the
initial version" of the commit message, but in the context of an SCM,
"version" is a loaded word that can needlesslyl confuse readers.
Explain the purpose of the mechanism without using "version".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a remote repo has too many tags (or branches), cloning it over the
smart HTTP transport can fail because remote-curl.c puts all the refs
from the remote repo on the fetch-pack command line. This can make the
command line longer than the global OS command line limit, causing
fetch-pack to fail.
This is especially a problem on Windows where the command line limit is
orders of magnitude shorter than Linux. There are already real repos out
there that msysGit cannot clone over smart HTTP due to this problem.
Here is an easy way to trigger this problem:
git init too-many-refs
cd too-many-refs
echo bla > bla.txt
git add .
git commit -m test
sha=$(git rev-parse HEAD)
tag=$(perl -e 'print "bla" x 30')
for i in `seq 50000`; do
echo $sha refs/tags/$tag-$i >> .git/packed-refs
done
Then share this repo over the smart HTTP protocol and try cloning it:
$ git clone http://localhost/.../too-many-refs/.git
Cloning into 'too-many-refs'...
fatal: cannot exec 'fetch-pack': Argument list too long
50k tags is obviously an absurd number, but it is required to
demonstrate the problem on Linux because it has a much more generous
command line limit. On Windows the clone fails with as little as 500
tags in the above loop, which is getting uncomfortably close to the
number of tags you might see in real long lived repos.
This is not just theoretical, msysGit is already failing to clone our
company repo due to this. It's a large repo converted from CVS, nearly
10 years of history.
Four possible solutions were discussed on the Git mailing list (in no
particular order):
1) Call fetch-pack multiple times with smaller batches of refs.
This was dismissed as inefficient and inelegant.
2) Add option --refs-fd=$n to pass a an fd from where to read the refs.
This was rejected because inheriting descriptors other than
stdin/stdout/stderr through exec() is apparently problematic on Windows,
plus it would require changes to the run-command API to open extra
pipes.
3) Add option --refs-from=$tmpfile to pass the refs using a temp file.
This was not favored because of the temp file requirement.
4) Add option --stdin to pass the refs on stdin, one per line.
In the end this option was chosen as the most efficient and most
desirable from scripting perspective.
There was however a small complication when using stdin to pass refs to
fetch-pack. The --stateless-rpc option to fetch-pack also uses stdin for
communication with the remote server.
If we are going to sneak refs on stdin line by line, it would have to be
done very carefully in the presence of --stateless-rpc, because when
reading refs line by line we might read ahead too much data into our
buffer and eat some of the remote protocol data which is also coming on
stdin.
One way to solve this would be to refactor get_remote_heads() in
fetch-pack.c to accept a residual buffer from our stdin line parsing
above, but this function is used in several places so other callers
would be burdened by this residual buffer interface even when most of
them don't need it.
In the end we settled on the following solution:
If --stdin is specified without --stateless-rpc, fetch-pack would read
the refs from stdin one per line, in a script friendly format.
However if --stdin is specified together with --stateless-rpc,
fetch-pack would read the refs from stdin in packetized format
(pkt-line) with a flush packet terminating the list of refs. This way we
can read the exact number of bytes that we need from stdin, and then
get_remote_heads() can continue reading from the same fd without losing
a single byte of remote protocol data.
This way the --stdin option only loses generality and scriptability when
used together with --stateless-rpc, which is not easily scriptable
anyway because it also uses pkt-line when talking to the remote server.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that, when using commit --template, the message *must* be
changed or the commit will be aborted.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ivan Heffner <iheffner@gmail.com>
Signed-off-by: Adam Monsen <haircut@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some distributors customize the fallback pager and editor used by git
commands when the user has not indicated a preference via the
core.editor/core.pager configuration or GIT_EDITOR, GIT_PAGER, VISUAL,
EDITOR, and PAGER environment variables, and git's build system
provides DEFAULT_PAGER and DEFAULT_EDITOR makefile settings to help
them with that (see v1.6.6-rc0~24, 2009-11-20).
Unfortunately those compile-time settings do not affect the
documentation, so the uninitiated user who tries to understand git by
reading the git-var(1) manpage can easily be confused when git falls
back to 'nano' and 'more' instead of 'vi' and 'less'. Even if the
distributor patches the distributed docs to reflect the new default,
the user may read the official documentation from the git-htmldocs
repository online and be confused in the same way.
Add a few words stating that the defaults are customizable at
compile time to make the behavior crystal clear.
Reported-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using this option git will search for all submodules that
have changed in the revisions to be send. It will then try to
push the currently checked out branch of each submodule.
This helps when a user has finished working on a change which
involves submodules and just wants to push everything in one go.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found by running this command:
$ git ls-files -z|xargs -0 perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt]o)\s+\1\b/gims)' \
-e ' {' \
-e ' $n = ($` =~ tr/\n/\n/ + 1);' \
-e ' ($v = $&) =~ s/\n/\\n/g;' \
-e ' print "$ARGV:$n:$v\n";' \
-e ' }'
Why not just git grep -E ...?
That wouldn't work then the doubled words are separated by a newline.
This is derived from a Makefile syntax-check rule in gnulib's maint.mk:
http://git.sv.gnu.org/cgit/gnulib.git/tree/top/maint.mk
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
am supports a number of pass-through options
to apply, like --exclude and --directory. Add
--include to this list.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's currently no way to suppress the informational
"deleted branch..." or "set up tracking..." messages. This
patch provides a "-q" option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the other options were included in the synopsis, so it makes
sense to include these as well.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously GIT_EDITOR was not listed in git(1) "Environment Variables" section,
which could be very confusing to users. Include it in "other" subsection along
with a link to git-var(1), since that is the page that fully describes all
places where editor can be set and also their preference order.
Also, git-var(1) did not say that hardcoded fallback 'vi' may have been changed
at build time. A user could be puzzled if 'nano' pops up even when none of the
mentioned environment vars or config.editor are set. Clarify this.
Ideally, the build system should be changed to reflect the chosen fallback
editor when creating the man pages. Not sure if that is even possible though.
Signed-off-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An alphabetic ordered list (a.) is converted to numerical in
the man page (1.) so context comments naming 'a' were confusing,
fix that by not using ordered list notation for 'a' anb 'b' items.
Signed-off-by: Nelson Benitez Leon <nelsonjesus.benitez@seap.minhap.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "it's" to "its" where a possessive is intended. Also add two
missing "the" that were noticed by Ben Walton.
Signed-off-by: David Waitzman <djw@bbn.com>
Even though 1.7.9.x series does not open the editor by default
when merging in general, it does do so in one occassion: when
merging an annotated tag. And worse yet, there is no good way
for older scripts to decline this.
Backport the support for GIT_MERGE_AUTOEDIT environment variable
from 1.7.10 track to help those stuck on 1.7.9.x maintenance
track.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
deltawalker has been supported since 284a126c3e, but was not added
to the list of valid diff tools reported by 'git difftool --help'.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous description was confusing. This rewrite makes it easier
to understand.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have had these options as harmless no-op for more than 3 years without
officially deprecating them. Let's announce the deprecation and start
warning against their use, but without failing the command just not yet,
so that we can later repurpose the option if we want to in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the 'remaining' command to the documentation of
'git rerere'. This command was added in ac49f5ca (Feb 16 2011;
Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>) but
it was never documented.
Touch up the other rerere commands to reduce noise.
First noticed by Vincent van Ravesteijn.
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Vincent van Ravesteijn
* vr/branch-doc:
Documentation/git-branch: add default for --contains
Documentation/git-branch: fix a typo
Documentation/git-branch: cleanups
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
Indicate that the commit parameter of --contains defaults to HEAD.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the exact option strings to be typed by end users are
already set in typewriter font by using `--option`, but a few places
used '--option' to call for italics or with no quoting. Uniformly
use `--option`.
Also add a full-stop after a sentence that missed one.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword the misspelled "squelch" noticed by Hermann Gaustere to say
"omit", which would sit better anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3 for the last time
http.proxy: also mention https_proxy and all_proxy
t0300: work around bug in dash 0.5.6
t5512 (ls-remote): modernize style
tests: fix spurious error when run directly with Solaris /usr/xpg4/bin/sh
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
The current wording of the http.proxy documentation suggests that
http_proxy is somehow equivalent to http.proxy. However, while
http.proxy (by the means of curl's CURLOPT_PROXY option) overrides the
proxy for both HTTP and HTTPS protocols, the http_proxy environment
variable is used only for HTTP. But since the docs mention only
http_proxy, a user might expect it to apply to all HTTP-like protocols.
Avoid any such misunderstanding by explicitly mentioning https_proxy and
all_proxy as well.
Also replace linkgit:curl[1] with a literal 'curl(1)', because the
former gets translated to a dead link in the HTML pages.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explained <rev>~<n> as <n>th generation grand-parent, but a reader got
confused by the "grand-" part when <n> is 1.
Reword it with "ancestor"; with the "generation" and "following only the
first parents" around there, what we try to describe should be clear
enough now.
Noticed-by: Luke Diamand <luke@diamand.org>
Helped-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --stat-graph-width=<width> can be used to limit the width
of the graph part even is more space is available. Up to <width>
columns will be used for the graph.
If commits changing a lot of lines are displayed in a wide terminal
window (200 or more columns), and the +- graph uses the full width,
the output can be hard to comfortably scan with a horizontal movement
of human eyes. Messages wrapped to about 80 columns would be
interspersed with very long +- lines. It makes sense to limit the
width of the graph part to a fixed value (e.g. 70 columns), even if
more columns are available.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way that available columns are divided between the filename part
and the graph part is modified to use as many columns as necessary for
the filenames and the rest for the graph.
If there isn't enough columns to print both the filename and the
graph, at least 5/8 of available space is devoted to filenames. On a
standard 80 column terminal, or if not connected to a terminal and
using the default of 80 columns, this gives the same partition as
before.
The effect of this change is visible in the patch to the test vector
in t4052; with a small change with long filename, it stops truncating
the name part too short, and also allocates a bit more columns to the
graph for larger changes.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Variable names must start with an alphabetic character, regexp config key
matching has its limits, sentence grammar.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default output from "fsck" is often overwhelmed by informational
message on dangling objects, especially if you do not repack often, and a
real error can easily be buried.
Add "--no-dangling" option to omit them, and update the user manual to
demonstrate its use.
Based on a patch by Clemens Buchacher, but reverted the part to change
the default to --no-dangling, which is unsuitable for the first patch.
The usual three-step procedure to break the backward compatibility over
time needs to happen on top of this, if we were to go in that direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Text between two '*' is emphasized in AsciiDoc and makes explanations in
rev-list-options.txt on glob-related options very confusing, as the
rendered text would be missing two asterisks and the text between them
would be emphasized instead.
Use '{asterisk}' where needed to make them show up as asterisks in the
rendered text.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful to resolve a symbolic ref and output the result in a
shortened form, such as for use in shell prompts. Add a "--short" option
to do so.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3
CodingGuidelines: do not use 'which' in shell scripts
CodingGuidelines: Add a note about spaces after redirection
post-receive-email: match up $LOGBEGIN..$LOGEND pairs correctly
post-receive-email: remove unused variable
