If we fail to load the oid from the index of a packfile, we'll die()
with an "internal error". But this should never happen: we'd fail here
only if the idx needed to be lazily opened (but we've already opened it)
or if we asked for an out-of-range index (but we're iterating using the
same count that we'd check the range against). A corrupted index might
have a bogus count (e.g., too large for its size), but we'd have
complained and aborted already when opening the index initially.
While we're here, we can add a few details so that if this bug ever
_does_ trigger, we'll have a bit more information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack bitmap file contains the index position of the commit for each
bitmap, which we then translate into an object id via
nth_packed_object_sha1(). In preparation for that function going away,
we can switch to the more type-safe nth_packed_object_id().
Note that even though the result ends up in an object_id this does incur
an extra copy of the hash (into our temporary object_id, and then into
the final malloc'd stored_bitmap struct). This shouldn't make any
measurable difference. If it did, we could avoid this copy _and_ the
copy of the rest of the items by allocating the stored_bitmap struct
beforehand and reading directly into it from the bitmap file. Or better
still, if this is a bottleneck, we could introduce an on-disk index to
the bitmap file so we don't have to read every single entry to use just
one of them. So it's not worth worrying about micro-optimizing out this
one hash copy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the pack-reuse code is dumping an OFS_DELTA entry to a client that
doesn't support it, we re-write it as a REF_DELTA. To do so, we use
nth_packed_object_sha1() to get the oid, but that function is soon going
away in favor of the more type-safe nth_packed_object_id(). Let's switch
now in preparation.
Note that this does incur an extra hash copy (from the pack idx mmap to
the object_id and then to the output, rather than straight from mmap to
the output). But this is not worth worrying about. It's probably not
measurable even when it triggers, and this is fallback code that we
expect to trigger very rarely (since everybody supports OFS_DELTA these
days anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already store an object_id internally, and now our sole caller also
has one. Let's stop passing around the internal hash array, which adds a
bit of type safety.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're considering reusing an on-disk delta, we get the oid of the
base as a pointer to unsigned char bytes of the hash, either into the
packfile itself (for REF_DELTA) or into the pack idx (using the revindex
to convert the offset into an index entry).
Instead, we'd prefer to use a more type-safe object_id as much as
possible. We can get the pack idx using nth_packed_object_id() instead.
For the packfile bytes, we can copy them out using oidread().
This doesn't even incur an extra copy overall, since the next thing we'd
always do with that pointer is pass it to can_reuse_delta(), which needs
an object_id anyway (and called oidread() itself). So this patch also
converts that function to take the object_id directly.
Note that we did previously use NULL as a sentinel value when the object
isn't a delta. We could probably get away with using the null oid for
this, but instead we'll use an explicit boolean flag, which should make
things more obvious for people reading the code later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our nth_packed_object_sha1() function returns NULL for error. So when we
wrapped it with nth_packed_object_oid(), we kept the same semantics. But
it's a bit funny, because the caller actually passes in an out
parameter, and the pointer we return is just that same struct they
passed to us (or NULL).
It's not too terrible, but it does make the interface a little
non-idiomatic. Let's switch to our usual "0 for success, negative for
error" return value. Most callers either don't check it, or are
trivially converted. The one that requires the biggest change is
actually improved, as we can ditch an extra aliased pointer variable.
Since we are changing the interface in a subtle way that the compiler
wouldn't catch, let's also change the name to catch any topics in
flight. We can drop the 'o' and make it nth_packed_object_id(). That's
slightly shorter, but also less redundant since the 'o' stands for
"object" already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code has been unused since fa099d2322 (worktree.c: kill parse_ref()
in favor of refs_resolve_ref_unsafe(), 2017-04-24), so drop it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fingerprints member of struct blame_origin is a void pointer that is
only ever used to reference objects of type struct fingerprint. Declare
its type to allow the compiler to do type checks. We can keep its type
opaque in blame.h, though -- only functions in blame.c need to know the
actual definition of struct fingerprint.
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The invocation "git rebase <upstream> <branch>" switches to <branch>
before performing the rebase operation. However, unlike git-switch,
git-checkout, and git-worktree which all refuse to switch to a branch
that is already checked out in some other worktree, git-rebase switches
to <branch> unconditionally. Curb this careless behavior by making
git-rebase also refuse to switch to a branch checked out elsewhere.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test intentionally creates a file which causes rebase to fail, thus
it is important that this file be deleted before subsequent tests are
run which are not expecting such a failure. In the past, the common way
to ensure cleanup (regardless of whether the test succeeded or failed)
was either for the next test to perform the previous test's cleanup as
its first step or to do the cleanup at global scope outside of any
tests. With the introduction of 'test_when_finished', however, tests can
be responsible for their own cleanup. Therefore, update this test to
clean up after itself.
A bit of history: This 'rm' invocation was moved from within the body of
the following test to global scope by bffd750adf (rebase: improve error
message when upstream argument is missing, 2010-05-31), which postdates,
by about a month, introduction of 'test_when_finished' in 3bf7886705
(test-lib: Let tests specify commands to be run at end of test,
2010-05-02).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We `cat` files, but don't inspect or grab the contents in any way.
Unlike in an earlier commit, there is no reason to suspect that these
files could be missing, so `cat`-ing them is just wasted effort.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We `cat` kwdelfile.c, but don't inspect or grab the contents in any way.
This looks like a remnant from a debug session. Similar to the previous
commit, one could argue that `cat`-ing the file verifies that it didn't
disappear somehow. But because the very next thing we do after `cat`-ing
the file is to `grep` in it, we can safely drop the call to `cat`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We `cat` files, but don't inspect or grab the contents in any way. These
`cat` calls look like remnants from a debug session, so it's tempting to
get rid of them. But they do actually verify that the files exist, which
might not necessarily be the case for some failure modes of `git apply
--reject`. Let's not lose that.
Convert the `cat` calls to use `test_path_is_file` instead. This is of
course still a minor change since we no longer verify that the files can
be opened for reading, but that is not something we usually worry about.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The receive.denyCurrentBranch config option controls what happens if
you push to a branch that is checked out into a non-bare repository.
By default, it rejects it. It can be disabled via `ignore` or `warn`.
Another yet trickier option is `updateInstead`.
However, this setting was forgotten when the git worktree command was
introduced: only the main worktree's current branch is respected.
With this change, all worktrees are respected.
That change also leads to revealing another bug,
i.e. `receive.denyCurrentBranch = true` was ignored when pushing into a
non-bare repository's unborn current branch using ref namespaces. As
`is_ref_checked_out()` returns 0 which means `receive-pack` does not get
into conditional statement to switch `deny_current_branch` accordingly
(ignore, warn, refuse, unconfigured, updateInstead).
receive.denyCurrentBranch uses the function `refs_resolve_ref_unsafe()`
(called via `resolve_refdup()`) to resolve the symbolic ref HEAD, but
that function fails when HEAD does not point at a valid commit.
As we replace the call to `refs_resolve_ref_unsafe()` with
`find_shared_symref()`, which has no problem finding the worktree for a
given branch even if it is unborn yet, this bug is fixed at the same
time: receive.denyCurrentBranch now also handles worktrees with unborn
branches as intended even while using ref namespaces.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`receive.denyCurrentBranch` currently has a bug where it allows pushing
into non-bare repository using namespaces as long as it does not have any
commits. This would cause t5509 to fail once that bug is fixed because it
pushes into an unborn current branch.
In t5509, no operations are performed inside `pushee`, as it is only a
target for `git push` and `git ls-remote` calls. Therefore it does not
need to have a worktree. So, it is safe to change `pushee` to a bare
repository.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When called in the Git directory of a non-bare repository, this function
would not return the directory of the main worktree, but of the Git
directory instead.
The reason: when the Git directory is the current working directory, the
absolute path of the common directory will be reported with a trailing
`/.git/.`, which the code of `get_main_worktree()` does not handle
correctly.
Let's fix this.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options are available since git v2.15, but somehow
eluded from the completion script.
Note that while --color-moved-ws= accepts comma-separated
list of values, there is no (easy?) way to make it work
with completion (see e.g. [1]).
[1]: https://github.com/scop/bash-completion/issues/240
Acked-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transition plan anticipates that we will allow signatures using
multiple algorithms in a single commit. In order to do so, we need to
use a different header per algorithm so that it will be obvious over
which data to compute the signature.
The transition plan specifies that we should use "gpgsig-sha256", so
wire up the commit code such that it can write and parse the current
algorithm, and it can remove the headers for any algorithm when creating
a new commit. Add tests to ensure that we write using the right header
and that git fsck doesn't reject these commits.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git supports both repository versions 0 and 1. These formats are
identical except for the presence of extensions. When using an
extension, such as for a different hash algorithm, a check for only
version 0 causes the check to fail. Instead, call
verify_repository_format to verify that we have an appropriate version
and no unknown extensions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we perform a clone, we won't know the remote side's hash algorithm
until we've read the heads. Consequently, we'll need to rewrite the
repository format version and hash algorithm once we know what the
remote side has. Move the code that does this into its own function so
that we can call it from clone in the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the foreseeable future, SHA-1 will be the default algorithm for Git.
However, when running the testsuite, we want to be able to test an
arbitrary algorithm. It would be quite burdensome and very untidy to
have to specify the algorithm we'd like to test every time we
initialized a new repository somewhere in the testsuite, so add an
environment variable to allow us to specify the default hash algorithm
for Git.
This has the benefit that we can set it once for the entire testsuite
and not have to think about it. In the future, users can also use it to
set the default for their repositories if they would like to do so.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the user to specify the hash algorithm on the command line by
using the --object-format option to git init. Validate that the user is
not attempting to reinitialize a repository with a different hash
algorithm. Ensure that if we are writing a non-SHA-1 repository that we
set the repository version to 1 and write the objectFormat extension.
Restrict this option to work only when ENABLE_SHA256 is set until the
codebase is in a situation to fully support this.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we will want to not only check the repository format, but
extract the information that we've gained. To do so, allow
check_repository_format to take a pointer to struct repository_format.
Allow passing NULL for this argument if we're not interested in the
information, and pass NULL for all existing callers. A future patch
will make use of this information.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test currently hard-codes the hash algorithm as SHA-1 when calling
repo_set_hash_algo so that the_hash_algo is properly initialized.
However, this does not work with SHA-256 repositories. Read the
repository value that repo_init has read into the local repository
variable and set the algorithm based on that value.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository helper is used in t5318 to read commit graphs whether
we're in a repository or not. However, without a repository, we have no
way to properly initialize the hash algorithm, meaning that the file is
misread.
Fix this by calling setup_git_directory_gently, which will read the
environment variable the testsuite sets to ensure that the correct hash
algorithm is set.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this test helper, we read the index. In order to have the proper
hash algorithm set up, we must call setup_git_directory. Do so, so that
the test works when extensions.objectFormat is set.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the git for-each-ref tests asks to sort by object ID. However,
when sorted, the order of the refs differs between SHA-1 and SHA-256.
Sort the expected output so that the test passes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we'll allow developers to run the testsuite with a hash
algorithm of their choice. To make this easier, compute the fixed
constants using test_oid. Move the constant initialization down below
the point where test-lib-functions.sh is loaded so the functions are
defined.
Note that we don't provide a value for the OID_REGEX value directly
because writing a large number of instances of "[0-9a-f]" in the
oid-info files is unwieldy and there isn't a way to compute it based on
those values. Instead, compute it based on ZERO_OID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At this point, SHA-256 support is experimental and some behavior may
change. To avoid surprising unsuspecting users, require a build flag,
ENABLE_SHA256, to allow use of a non-SHA-1 algorithm. Enable this flag
by default when the DEVELOPER make flag is set so that contributors can
test this case adequately.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some places where we need to parse a hex object ID in any
algorithm without knowing beforehand which algorithm is in use. An
example is when parsing fast-import marks.
Add a get_oid_hex_any to parse an object ID and return the algorithm it
belongs to, and additionally add parse_oid_hex_any which is the
equivalent change for parse_oid_hex. If the object is not parseable, we
return GIT_HASH_UNKNOWN.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce variants of get_oid_hex and parse_oid_hex that parse an
arbitrary hash algorithm, implementing internal functions to avoid
duplication. These functions can be used in the transport code to parse
refs properly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For all of our SHA-1 implementations and most of our SHA-256
implementations, the hash context we use is a real struct. For these
implementations, it's possible to copy a hash context by making a copy
of the struct.
However, for our libgcrypt implementation, our hash context is a
pointer. Consequently, copying it does not lead to an independent hash
context like we intended.
Fortunately, however, libgcrypt provides us with a handy function to
copy hash contexts. Let's add a cloning function to the hash algorithm
API, and use it in the one place we need to make a hash context copy.
With this change, our libgcrypt SHA-256 implementation is fully
functional with all of our other hash implementations.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid hard-coding a hash size, instead preferring to use the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can check if certain characters are present in a string by calling
strchr(3) on each of them, or we can pass them all to a single
strpbrk(3) call. The latter is shorter, less repetitive and slightly
more efficient, so let's do that instead.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
isalnum(c) is equivalent to isalpha(c) || isdigit(c), so use the
former instead. The result is shorter, simpler and slightly more
efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_path_is_file() instead of 'test -f' for better debugging
information.
Signed-off-by: Rasmus Jonsson <wasmus@zom.bi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using partial clone, find_non_local_tags() in builtin/fetch.c
checks each remote tag to see if its object also exists locally. There
is no expectation that the object exist locally, but this function
nevertheless triggers a lazy fetch if the object does not exist. This
can be extremely expensive when asking for a commit, as we are
completely removed from the context of the non-existent object and
thus supply no "haves" in the request.
6462d5eb9a (fetch: remove fetch_if_missing=0, 2019-11-05) removed a
global variable that prevented these fetches in favor of a bitflag.
However, some object existence checks were not updated to use this flag.
Update find_non_local_tags() to use OBJECT_INFO_SKIP_FETCH_OBJECT in
addition to OBJECT_INFO_QUICK. The _QUICK option only prevents
repreparing the pack-file structures. We need to be extremely careful
about supplying _SKIP_FETCH_OBJECT when we expect an object to not exist
due to updated refs.
This resolves a broken test in t5616-partial-clone.sh.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While testing partial clone, I noticed some odd behavior. I was testing
a way of running 'git init', followed by manually configuring the remote
for partial clone, and then running 'git fetch'. Astonishingly, I saw
the 'git fetch' process start asking the server for multiple rounds of
pack-file downloads! When tweaking the situation a little more, I
discovered that I could cause the remote to hang up with an error.
Add two tests that demonstrate these two issues.
In the first test, we find that when fetching with blob filters from
a repository that previously did not have any tags, the 'git fetch
--tags origin' command fails because the server sends "multiple
filter-specs cannot be combined". This only happens when using
protocol v2.
In the second test, we see that a 'git fetch origin' request with
several ref updates results in multiple pack-file downloads. This must
be due to Git trying to fault-in the objects pointed by the refs. What
makes this matter particularly nasty is that this goes through the
do_oid_object_info_extended() method, so there are no "haves" in the
negotiation. This leads the remote to send every reachable commit and
tree from each new ref, providing a quadratic amount of data transfer!
This test is fixed if we revert 6462d5eb9a (fetch: remove
fetch_if_missing=0, 2019-11-05), but that revert causes other test
failures. The real fix will need more care.
The tests are ordered in this way because if I swap the test order the
tag test will succeed instead of fail. I believe this is because somehow
we need the srv.bare repo to not have any tags when we clone, but then
have tags in our next fetch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An accidental conversion of a tab to 4 spaces snuck into 4c4066d95d
(run-command: move doc to run-command.h, 2019-11-17), messing up the
alignment when you have the project-recommended 8-width tabstops. Let's
revert that line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An annotated tag has two names: where it sits in the refs/tags
hierarchy and the tagname recorded in the "tag" field in the object
itself. They usually should match.
Since 212945d4 ("Teach git-describe to verify annotated tag names
before output", 2008-02-28), a commit described using an annotated
tag bases its name on the tagname from the object. While this was a
deliberate design decision to make it easier to converse about tags
with others, even if the tags happen to be fetched to a different
name than it was given by its creator, it had one downside.
The output from "git describe", at least in the modern Git, should
be usable as an object name to name the exact commit given to the
"git describe" command. Using the tagname, when two names differ,
breaks this property, when describing a commit that is directly
pointed at by such a tag. An annotated tag Bob made as "v1.0" may
sit at "refs/tags/v1.0-bob" in the ref hierarchy, and output from
"git describe v1.0-bob^0" would say "v1.0", but there may not be
any tag at "refs/tags/v1.0" locally or there may be another tag that
points at a different object.
Note that this won't be a problem if a commit being described is not
directly pointed at by such a mislocated tag. In the example in the
previous paragraph, describing a commit whose parent is v1.0-bob
would result in "v1.0" (i.e. the tagname taken from the tag object)
followed by "-1-gXXXXX" where XXXXX is the abbreviated object name,
and a string that ends with "-g" followed by a hexadecimal string is
an object name for the object whose name begins with hexadecimal
string (as long as it is unique), so it does not matter if the
leading part is "v1.0" or "v1.0-bob".
Show the name in the long format, i.e. with "-0-gXXXXX" suffix, when
the name we give is based on a mislocated annotated tag to ensure
that the output can be used as the object name for the object
originally given to the command to fix the issue.
While at it, remove an overly cautious dead code to protect against
an annotated tag object without the tagname. Such a tag is filtered
out much earlier in the codeflow, and will not reach this part of
the code.
Helped-by: Matheus Tavares <matheus.bernardino@usp.br>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9e6d3e64 (sparse-checkout: detect short patterns, 2020-01-24), a
condition on the minimum length of a cone-mode pattern was introduced.
However, this condition was off-by-one.
If we have a directory with a single character, say "b", then the
command
git sparse-checkout set b
will correctly add the pattern "/b/" to the sparse-checkout file. When
this is interpeted in dir.c, the pattern is "/b" with the
PATTERN_FLAG_MUSTBEDIR flag. This string has length two, which satisfies
our inclusive inequality (<= 2).
The reason for this inequality is that we will start to read the pattern
string character-by-character using three char pointers: prev, cur,
next. In particular, next is set to the current pattern plus two. The
mistake was that next will still be a valid pointer when the pattern
length is two, since the string is null-terminated.
Make this inequality strict so these patterns work.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output of "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable
or base64. Add a new mode to "git am --show-current-patch" in order to
straighten the suggestion.
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable or
base64. To simplify worktree operations and to avoid that users poke into
.git, it would be better if "git am" also provided a mode that copies
.git/rebase-merge/patch to stdout.
One possibility could be to have completely separate options, introducing
for example --show-current-message (for .git/rebase-apply/NNNN)
and --show-current-diff (for .git/rebase-apply/patch), while possibly
deprecating --show-current-patch.
That would even remove the need for the first two patches in the series.
However, the long common prefix would have prevented using an abbreviated
option such as "--show". Therefore, I chose instead to add a string
argument to --show-current-patch. The new argument is optional, so that
"git am --show-current-patch"'s behavior remains backwards-compatible.
The next choice to make is how to handle multiple --show-current-patch
options. Right now, something like "git am --abort --show-current-patch"
is rejected, and the previous suggestion would likewise have naturally
rejected a command line like
git am --show-current-message --show-current-diff
Therefore, I decided to also reject for example
git am --show-current-patch=diff --show-current-patch=raw
In other words the whole of --show-current-patch=xxx (including the
optional argument) is treated as the command mode. I found this to be
more consistent and intuitive, even though it differs from the usual
"last one wins" semantics of the git command line.
Add the code to parse submodes based on the above design, where for now
"raw" is the only valid submode. "raw" prints the full e-mail message
just like "git am --show-current-patch".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow stashing the submode of --show-current-patch from a
callback function. Using a struct will allow accessing both fields from
outside cmd_am (through container_of).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPTION_CMDMODE is essentially OPTION_SET_INT plus an extra check that
the variable had not set before. In order to allow custom processing
of the option, for example a "command mode" option that also has an
argument, it would be nice to use OPTION_CALLBACK and not have to rewrite
the extra check on incompatible options. In other words, making the
processing of the option orthogonal to the "only one of these" behavior
provided by OPTION_CMDMODE.
Add a new flag that takes care of the check, and modify OPT_CMDMODE to
use it together with OPTION_SET_INT. The new flag still requires that the
option value points to an int, but any OPTION_* value can be specified as
long as it does not require a non-int type for opt->value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before modifying the implementation, ensure that general operation of
OPT_CMDMODE() and detection of incompatible options are covered.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, a user will want to use a specific credential helper for
a wildcard pattern, such as https://*.corp.example.com. We have code
that handles this already with the urlmatch code, so let's use that
instead of our custom code.
Since the urlmatch code is a superset of our current matching in terms
of capabilities, there shouldn't be any cases of things that matched
previously that don't match now. However, in addition to wildcard
matching, we now use partial path matching, which can cause slightly
different behavior in the case that a helper applies to the prefix
(considering path components) of the remote URL. While different, this
is probably the behavior people were wanting anyway.
Since we're using the urlmatch code, we need to encode the components
we've gotten into a URL to match, so add a function to percent-encode
data and format the URL with it. We now also no longer need to the
custom code to match URLs, so let's remove it.
Additionally, the urlmatch code always looks for the best match, whereas
we want all matches for credential helpers to preserve existing
behavior. Let's add an optional field, select_fn, that lets us control
which items we want (in this case, all of them) and default it to the
best-match code that already exists for other users.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Everywhere else in the codebase, we use the rule that the last matching
configuration option is the one that takes effect. This is helpful
because it allows more specific configuration settings (e.g., per-repo
configuration) to override less specific settings (e.g., per-user
configuration).
However, in the credential code, we didn't honor this setting, and
instead picked the first setting we had, and stuck with it. This was
likely to ensure we picked the value from the URL, which we want to
honor over the configuration.
It's possible to do both, though, so let's check if the value is the one
we've gotten over our protocol connection, which if present will have
come from the URL, and keep it if so. Otherwise, let's overwrite the
value with the latest version we've got from the configuration, so we
keep the last configuration value.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some tricky cases in our credential helpers that we don't have
test cases for. To help prevent regressions, let's add some for these
cases:
* If there are multiple configured credential helpers, one without a
path and one with a path, we want to invoke both of them.
* If there are percent-encoded values in the URL, we handle them
properly.
* And finally, if there is a username in the remote URL, we want to
honor that over what the configuration tells us.
Finally, there's an additional case that we'd like to test for as well,
but that currently fails. In all other situations in our configuration,
we pick the last configuration setting that's provided. However, we
fail to do that for credential.username, where we pick the first setting
instead. Let's add a failing test that we have the consistent behavior
here, since that's the documented, expected behavior.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
