The logic to countermand suppression of Cc to the signers with a more
explicit --signed-off-by option done in 6564828 (git-send-email:
Generalize auto-cc recipient mechanism) suffers from a double-negation
error.
A --signed-off-cc option, when false, should actively suppress CC: to be
generated out of S-o-b lines, and it should refrain from suppressing when
it is true.
It also fixes "(sob) Adding cc:" status output; earlier it included the
line terminator LF inside '%s', which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression introduced by
1ca3d6e (send-email: squelch warning due to comparing undefined $_ to "")
where if the user was prompted for an initial In-Reply-To and didn't
provide one, messages would be sent out with an invalid In-Reply-To of
"<>"
Also add test cases for the regression and the fix. A small modification
was needed to allow send-email to take its replies from stdin if the
environment variable GIT_SEND_EMAIL_NOTTY is set.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Clarified the meaning of git-add -u in the documentation
git-clone.sh: properly configure remote even if remote's head is dangling
Documentation/git-stash: document options for git stash list
send-email: squelch warning due to comparing undefined $_ to ""
The check to see if initial_reply_to is defined was also comparing $_ to
"" for a reason I cannot ascertain (looking at the commit which made the
change didn't provide enlightenment), but if $_ is undefined, perl
generates a warning.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few options to git-send-email to suppress the automatic
generation of 'Cc' fields: --suppress-from, and --signed-off-cc.
However, there are other times that git-send-email automatically
includes Cc'd recipients. This is not desirable for all development
environments.
Add a new option --suppress-cc, which can be specified one or more
times to list the categories of auto-cc fields that should be
suppressed. If not specified, it defaults to values to give the same
behavior as specified by --suppress-from, and --signed-off-cc. The
categories are:
self - patch sender. Same as --suppress-from.
author - patch author.
cc - cc lines mentioned in the patch.
cccmd - avoid running the cccmd.
sob - signed off by lines.
all - all non-explicit recipients
Signed-off-by: David Brown <git@davidb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when the user sent the EOF control character, the
prompts would be repeated on the same line as the previous
prompt.
Now, repeat prompts display on separate lines.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single signal handler is used for both SIGTERM and
SIGINT in order to clean up after an uncouth termination
of git-send-email.
In particular, the handler resets the text color (this cleanup
was already present), turns on tty echoing (in case termination
occurrs during a masked Password prompt), and informs the user
of of any temporary files created by --compose.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whilst convenient, it is most unwise to record passwords
in any place but one's brain. Moreover, it is especially
foolish to store them in configuration files, even with
access permissions set accordingly.
git-send-email has been amended, so that if it detects
an smtp username without a password, it promptly prompts
for the password and masks the input for privacy.
Furthermore, the argument to --smtp-pass has been rendered
optional.
The documentation has been updated to reflect these changes.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the subtile bug in git send-email that was introduced into
git send-email with aa54892f5a (send-email:
detect invocation errors earlier), which caused no patches to be sent
out if the --compose flag was used.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Tested-by: Seth Falcon <seth@userprimary.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we are now sanity-checking the contents of patches and
refusing to send ones with long lines, this knob provides a
way for the user to override the new behavior (if, e.g., he
knows his SMTP path will handle it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to catch errors early so that we don't end up sending
half of a broken patch series. Right now the only validation
is checking that line-lengths are under the SMTP-mandated
limit of 998.
The validation parsing is very crude (it just checks each
line length without understanding the mailbox format) but
should work fine for this simple check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never even look at the command line arguments until after
we have prompted the user for some information. So running
"git send-email" without arguments would prompt for "from"
and "to" headers, only to then die with "No patch files
specified." Instead, let's try to do as much error checking
as possible before getting user input.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git send-email does not accept $EDITOR with arguments, eg,
emacs -nw, when starting an editor to produce a cover letter. This
patch changes this by letting the shell handle the option parsing.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to unconditionally add a message-id to the outgoing
email without bothering to check if it already had one.
Instead, let's use the existing one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not prompting, initial_reply_to can be left unset. Do not try to
sanitize it and get useless warning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3803bcea tried to fix this, but it only adds the branckes when the given
In-Reply-To begins and ends with whitespaces. It also didn't do anything
to the --in-reply-to argument.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-send-email with SMTP authentication sending a patch series
would redundantly authenticate multiple times, once for each patch. In
the worst case, this would actually prevent the series from being sent
because the server would reply with a "5.5.0 Already Authenticated"
status code which would derail the process.
This commit teaches git-send-email to authenticate once and only once at
the beginning of the series.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We add the content-type header only when we have non-7bit
characters from the 'From' header, so we really need to
specify the encoding (in other cases, where the commit text
needed a content-type, git-format-patch will already have
added the encoding header).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a git newbie, it was confusing to set an In-Reply-To header but then
not see it printed when the git-send-email command was run.
This patch prints all headers that would be sent to sendmail or an SMTP
server instead of only printing From, Subject, Cc, To. It also removes
the now-extraneous Date header after the "Log says" line.
Added test to t/t9001-send-email.sh.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes pick out the original rfc822 'From' header and
include it in the body of the message. If the original
author's name needs encoding, then we should specify that in
the content-type header.
If we already had a content-type header in the mail, then we
may need to re-encode. The logic is there to detect
this case, but it doesn't actually do the re-encoding.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing for 1.5.3.6
git-send-email: Change the prompt for the subject of the initial message.
SubmittingPatches: improve the 'Patch:' section of the checklist
instaweb: Minor cleanups and fixes for potential problems
stop t1400 hiding errors in tests
Makefile: add missing dependency on wt-status.h
refresh_index_quietly(): express "optional" nature of index writing better
Fix sed string regex escaping in module_name.
Avoid a few unportable, needlessly nested "...`...".
git-mailsplit: with maildirs not only process cur/, but also new/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I never understood what this prompt was asking for until I read the actual
source code. I think this wording is much more understandable.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some projects prefer to receive patches via a given email address.
In these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can use --smtp-server-port option to specify a port
different from the default (typically, SMTP servers listen
to smtp port 25 and ssmtp port 465).
Users should be aware that sending auth info over non-ssl
connections may be unsafe or just may not work at all
depending on SMTP server config.
Signed-off-by: Glenn Rempe <glenn@rempe.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
send-email: make message-id generation a bit more robust
git-gui: Disable native platform text selection in "lists"
git-gui: Paper bag fix "Commit->Revert" format arguments
git-gui: Provide 'uninstall' Makefile target to undo an installation
git-gui: Font chooser to handle a large number of font families
git-gui: Make backporting changes from i18n version easier
git-gui: Don't delete send on Windows as it doesn't exist
git-gui: Trim trailing slashes from untracked submodule names
git-gui: Assume untracked directories are Git submodules
git-gui: handle "deleted symlink" diff marker
git-gui: show unstaged symlinks in diff viewer
git-gui: Avoid use of libdir in Makefile
git-gui: Disable Tk send in all git-gui sessions
git-gui: lib/index.tcl: handle files with % in the filename properly
git-gui: Properly set the state of "Stage/Unstage Hunk" action
git-gui: Fix detaching current branch during checkout
git-gui: Correct starting of git-remote to handle -w option
Earlier code took Unix time and appended a few random digits.
If you are firing off many messages within a second, you could
issue the same id to different messages, which is a no-no. If
you send out 31 messages within a single second, with random
integer taken out of rand(4200), you have about 10% chance of
producing the same message ID.
This fixes the problem by uses a prefix string which is
constant-per-invocation (time and pid), with a serial number for
each message generated by the process appended at the end.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
stash: end index commit log with a newline
git-commit: Disallow amend if it is going to produce an empty non-merge commit
git-send-email.perl: Add angle brackets to In-Reply-To if necessary
Fix a test failure (t9500-*.sh) on cygwin
Although message-id by defintion should have surrounding angle
brackets, there is no point forcing people to type them in.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows username and password to be given using --smtp-user
and --smtp-pass. SSL use is flagged by --smtp-ssl. These are
backed by corresponding defaults in the git configuration file.
This implements Junio's 'mail identity' suggestion in a slightly
more generalised manner. --identity=$identity, backed by
sendemail.identity indicates that the configuration subsection
[sendemail "$identity"] should take priority over the [sendemail]
section for all configuration values.
Signed-off-by: Douglas Stockwell <doug@11011.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you break out of the prompts presented to you by git send-email
your terminal can be left in an inconsistent state. Here we trap
the interrupt signal and reset the terminal before exiting.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option allows an arbitrary "cmd" to generate per patch
file specific "Cc:"s.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- when sending several mails I got a slightly different behaviour for the first
mail compared to the second to last one. The reason is that $from was
assigned in line 608 and was not reset when beginning to handle the next
mail.
- Email::Valid can only handle properly quoted real names, so quote arguments
to extract_valid_address.
This patch cleans up variable naming to better differentiate between sender of
the mail and it's author.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Email::Valid does respect this considering such a mailbox specification
invalid. b06c6bc831 addressed the issue, but
only if Email::Valid is available.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch I'm not able to properly send emails as I have a
non-ascii character in my name.
I removed the _rfc822 suffix from the function name as it now does more
than rfc822 quoting.
I dug through rfc822 to do the double quoting right. Only if that is not
possible rfc2047 quoting is applied.
Signed-off-by: Uwe Kleine-K,Av(Bnig <ukleinek@informatik.uni-freiburg.de>
Cc: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pine address book format is tab seperated and the first field
is the nickname/alias and the third field is the email address as
per:
http://www.washington.edu/pine/tech-notes/low-level.html
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-send-email.perl on a changeset that has:
Cc: <stable@kernel.org>
in the body of the description, and the Email::Valid perl module is
installed on the system, the email address will be deemed "invalid" for
some reason (Email::Valid isn't smart enough to handle this?) and
complain and not send the address the email.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes git-send-email's behavior easier to modify by adding config
equivalents for two more of git-send-email's flags.
The mapping of flag to config setting is:
--[no-]supress-from => sendemail.suppressfrom
--[no-]signed-off-cc => sendemail.signedoffcc
It renames the --threaded option to --thread/--no-thread; the
config variable is also called sendemail.thread.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --threaded option controls whether the In-Reply-To header will be set on
any emails sent. The current behavior is to always set this header, so this
option is most useful in its negated form, --no-threaded. This behavior can
also be controlled through the 'sendemail.threaded' config setting.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the original $from address fails to yield a valid-looking
e-mail address, we created a bogus looking message ID, formatted
like this:
Message-Id: <11823357623688-git-send-email->
This commit fixes it by moving call to make_message_id() to
where it matters, namely, before the $message_id is needed to be
placed in the generated e-mail header; this has an important
side effect of making it clear that $from is already available.
Also throw in Sys::Hostname::hostname() just for fun, although I
suspect that the code would never trigger due to the modified
call sequence that makes sure $from is always available. This
is based on a suggestion by Michael Hendricks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes --suppress-from actually work when you're unfortunate enough
to have non-ASCII in your name. Also, if there's a match use the optionally
RFC2047 quoted version from the email.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mutt version 1.5.14 (perhaps earlier versions too) permits alias files to have
white space before the 'alias' keyword.
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames config_boolean() to config_bool() for consistency with
the commandline interface and because it is shorter but still obvious. ;-)
It also changes the return value from some obscure string to real Perl
boolean, allowing for clean user code.
Signed-off-by: Petr Baudis <pasky@suse.cz>
* maint:
Start preparing for 1.5.1.3
Sanitize @to recipients.
git-svn: Ignore usernames in URLs in find_by_url
Document --dry-run and envelope-sender for git-send-email.
Allow users to optionally specify their envelope sender.
Ensure clean addresses are always used with Net::SMTP
Validate @recipients before using it for sendmail and Net::SMTP.
Perform correct quoting of recipient names.
Change the scope of the $cc variable as it is not needed outside of send_message.
Debugging cleanup improvements
Prefix Dry- to the message status to denote dry-runs.
Document --dry-run parameter to send-email.
git-svn: Don't rely on $_ after making a function call
Fix handle leak in write_tree
Actually handle some-low memory conditions
Conflicts:
RelNotes
git-send-email.perl
We need to sanitize @to as well to ensure that names are properly quoted.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If your normal user is not the same user you are subscribed to a list with,
then the default envelope sender used will cause your messages to bounce or
silently vanish into the ether.
This patch provides an optional parameter to set the envelope sender.
To use it with the sendmail binary, you must have privileges to use the -f
parameter!
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Always pass in clean addresses to Net::SMTP for the MAIL FROM, and use them on
the SMTP non-quiet output as well.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ensure that @recipients is only raw addresses when it is handed to the sendmail
binary OR Net::SMTP, otherwise BCC cases might get an extra <, or wierd stuff
might be passed to the exec.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Always perform quoting of the recipient names if they contain periods,
previously only the author's address was treated this way. This stops sendmail
binaries from exploding the name into bad addresses.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$cc is only used inside the send_message scope, so lets clean it out of the global scope.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The debug output is much more helpful if it has the parameters that were used.
Pull the sendmail parameters into a seperate array for that, and also include
similar data during the Net::SMTP case.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While doing testing, it's useful to see that a dry run was actually done,
instead of a real one.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Looks like --dry-run was added to the code, but never to the --help output.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The number of characters in a line MUST be no more than 998 characters,
and SHOULD be no more than 78 characters (RFC2822).
It is much safer to fold the header by ourselves.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Linux kernel, for example, it's common to include Cc: lines
for cases when you want to remember to cc someone on a patch without
necessarily claiming they signed off on it. Make git-send-email
aware of these.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Chain-reply-to is a personal perference, and is unlikely to change from
patchset to patchset. Similarly, bcc is likely to have the same values
every invocation is one likes to bcc oneself.
So, allow both to be set via configuration variables.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
rfc2047 unquoter spitted out an annoying "- unquoted" which was
added during debugging but I forgot to remove.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-send-email sends out the message taken from format-patch
output without quoting nor encoding. When copying the From:
line to form in-body From: field, it should not copy it
verbatim, because the From: for the header is quoted according
to RFC 2047 when not ASCII.
The original came from Jürgen Rühle, but I moved the
string munging into a separate function so that later other
people can tweak it more easily. Bugs introduced during the
translation are mine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If user hits enter at the prompt for
"Who should the emails appear to be from?",
the value for "From:" field was emptied instead of GIT_COMMITER_IDENT.
Signed-off-by: Quy Tonthat <qtonthat@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make the default value for --smtp-server configurable through the
'sendemail.smtpserver' option in .git/config (or $HOME/.gitconfig).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Acked-by: Ryan Anderson <rda@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We already generate a Date: header based on when the patch was
emailed. git-format-patch includes the Date: header of the
patch. Having two Date: headers is just confusing, so we
just use the current Date:
Often the mailed patches in a patch series are created over a
series of several hours or days, so the Date: header from the
original commit is incorrect for email, and often far off enough
for spam filters to complain.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I noticed a case not handled in a recent patch.
Demonstrate it like this:
$ touch new-file
$ git-send-email --dry-run --from j --to k new-file 2>err
new-file
OK. Log says:
Date: Thu, 19 Oct 2006 10:26:24 +0200
Sendmail: /usr/sbin/sendmail
From: j
Subject:
Cc:
To: k
Result: OK
$ cat err
Use of uninitialized value in pattern match (m//) at /p/bin/git-send-email line 416.
Use of uninitialized value in concatenation (.) or string at /p/bin/git-send-email line 420.
Use of uninitialized value in concatenation (.) or string at /p/bin/git-send-email line 468.
There's a patch for the $author_name part below.
The example above shows that $subject may also be used uninitialized.
That should be easy to fix, too.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/send-email:
Make git-send-email detect mbox-style patches more readily
git-send-email: real name with period need to be dq-quoted on From: line
git-send-email: do not drop custom headers the user prepared
Add a --dry-run option to git-send-email due to having made too many
mistakes with it in the past week. I like having a safety catch on my
machine gun.
Signed-off-by: Matthew @ilcox <matthew@wil.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier we insisted that mbox file to begin with "From ". That
is fine as long as you feed format-patch output, but if you
handcraft the input file, this is unnecessary burden. We should
detect lines that look like e-mail headers and say that is also
a mbox file.
The other input file format is traditional "send lots of email",
whose first line would never look like e-mail headers, so this
is a safe change.
The original patch was done by Matthew Wilcox, which checked
explicitly for headers the script pays attention to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
An author name like 'A. U. Thor <a.u.thor@example.com>" is not a
valid RFC 2822 address; when placing it on From: line, we would
need to quote it, like this:
Signed-off-by: "Junio C. Hamano" <junkio@cox.net>
The command picked up only Subject, CC, and From headers in the
incoming mbox text. Sending out patches prepared by
git-format-patch with user's custom headers was impossible with
that.
Just keep the ones it does not need to look at and add them to
the header of the message when sending it out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/gitpm: (52 commits)
Remove -fPIC which was only needed for Git.xs
Git.pm: Kill Git.xs for now
Revert "Make it possible to set up libgit directly (instead of from the environment)"
Revert "Git.pm: Introduce fast get_object() method"
Revert "Convert git-annotate to use Git.pm"
Fix compilation with Sun CC
pass DESTDIR to the generated perl/Makefile
Eliminate Scalar::Util usage from private-Error.pm
Convert git-annotate to use Git.pm
Git.pm: Introduce fast get_object() method
Make it possible to set up libgit directly (instead of from the environment)
Work around sed and make interactions on the backslash at the end of line.
Git.pm: Introduce ident() and ident_person() methods
Convert git-send-email to use Git.pm
Git.pm: Add config() method
Use $GITPERLLIB instead of $RUNNING_GIT_TESTS and centralize @INC munging
INSTALL: a tip for running after building but without installing.
Perly Git: make sure we do test the freshly built one.
Git.pm: Don't #define around die
Git.xs: older perl do not know const char *
...
When an mbox-style patch contains a Cc: line in the header,
git-send-email will check the address against the sender specified
on the command line. If they don't match, sender_not_author will
be set to the address obtained from the Cc line.
When this happens, git-send-email inserts a From: line at the
beginning of the message body with the address obtained from the
Cc line in the header, and the sender might be accused of forging
patch authors.
This patch fixes this by only updating sender_not_author when
processing From: lines, not when processing Cc: lines.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is no sense in duplicating the sender address in Reply-To as it's
already provided in the From header.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is not worth trying to force C locale (and failing) just to
format the 2822 datestring.
This code was borrowed from /usr/bin/822-date (Ian Jackson and
Klee Dienes, both in public domain), per suggestion by Eric Wong.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Jakub Narebski <jnareb@gmail.com>
As long as we do not need to readline from the terminal, we
should not barf when starting up the program. Without this
patch, t9001 test on Cygwin occasionally died with the following
error message:
Unable to get Terminal Size. The TIOCGWINSZ ioctl didn't work. The COLUMNS and LINES environment variables didn't work. The resize program didn't work. at /usr/lib/perl5/vendor_perl/5.8/cygwin/Term/ReadKey.pm line 362.
Compilation failed in require at /usr/lib/perl5/vendor_perl/5.8/Term/ReadLine/Perl.pm line 58.
Acked-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When multiple recipients are given to git-send-email on the same
--cc line the code does not properly handle it.
Full and proper parsing of the email addresses so I can detect
which commas mean a new email address is more than I care to implement.
In particular this email address: "bibo,mao" <bibo.mao@intel.com>
must not be treated as two email addresses.
So this patch simply treats all commas in recipient lists as
an error and fails if one is given.
At the same time it documents that git-send-email wants multiple
instances of --cc specified on the command line if you want to
cc multiple recipients.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the pattern matching subroutine by introducing
two variables to hold regexp to approximately match local-part
and domain in the e-mail address. It is meant to catch obvious
mistakes with a cheap check.
The patch also moves "scalar" to force Email::Valid->address()
to work in !wantarray environment to extract_valid_address;
earlier it was in the caller of the subroutine, which was way
too error prone.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Fix the regular expressions for local addresses
- Fix the fallback regexp for non-local addresses, simplify the logic
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was proposed by Eric Wong and fixes the test. (Of course, git-send-email
does not work, if there is no Net::SMTP here, but it will say what is wrong
when you actually try to use send-email.)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm not sure why we never actually rejected invalid addresses in
the first place. We just seemed to be using our email validity
checkers to kill duplicates.
Now we just drop invalid email addresses completely and warn
the user about it.
Since we support local sendmail, we'll also accept username-only
addresses.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This should make local mailing possible for machines without
a connection to an SMTP server.
It'll default to using /usr/sbin/sendmail or /usr/lib/sendmail
if no SMTP server is specified (the default). If it can't find
either of those paths, it'll fall back to connecting to an SMTP
server on localhost.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
