Git-cvsimport is written in perl, which understandably
causes the tests to fail if you build with NO_PERL (which
will avoid building cvsimport at all). The earlier cvsimport
tests in t9600-t9602 are all marked with a PERL
prerequisite, but these ones are not.
The one in t9603 was likely not noticed because it is an
expected failure anyway.
The ones in t9604 have been around for a long time, but it
is likely that the combination of NO_PERL and having cvsps
installed is rare enough that nobody noticed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add-interactive system is built in perl. If you build
with NO_PERL, running "git commit --interactive" will exit
with an error and the test will fail.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If NO_PERL is not set, our perl scripts are built as
usual. If it is set, then we build "dummy" versions that
tell you git was built without perl support and exit
gracefully.
However, if you switch to NO_PERL in a directory with
existing build artifacts, we do not notice that the files
need rebuilt. We see only that they are newer than the
"unimplemented.sh" wrapper and assume they are done. So
doing:
make
make NO_PERL=Nope
would result in a git-add--interactive script that uses perl
(and running the test suite would make use of it).
Instead, we should trigger a rebuild of the perl scripts
anytime NO_PERL changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since time immemorial, the test of whether to set "core.filemode"
has been done by trying to toggle the u+x bit on $GIT_DIR/config,
which we know always exists, and then testing whether the change
"took". I find it somewhat odd to use the config file for this
test, but whatever.
The test code didn't set the u+x bit back to its original state
itself, instead relying on the subsequent call to git_config_set()
to re-write the config file with correct permissions.
But ever since
daa22c6f8d config: preserve config file permissions on edits (2014-05-06)
git_config_set() copies the permissions from the old config file to
the new one. This is a good change in and of itself, but it
invalidates the create_default_files()'s assumption, causing "git
init" to leave the executable bit set on $GIT_DIR/config.
Reset the permissions on $GIT_DIR/config when we are done with the
test in create_default_files().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the time the caller specifies to which destination variable
the resulting index_state should be assigned by passing a non-NULL
pointer in o->dst_index to receive that state, but for a caller that
gives a NULL o->dst_index, the resulting index simply leaked.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://github.com/git-l10n/git-po:
l10n: de.po: translate 62 new messages
l10n: de.po: Fixup one translation
l10n: de.po: use imperative form for command options
The git-push manual page used "gitlink" in one place instead of
"linkgit". Fix this so the link renders correctly.
Noticed-by: Dan Allen <dan.j.allen@gmail.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strings returned by git_path() are recycled after a while. Make
a copy of the config filename rather than holding onto the return
value from git_path().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using abs() on long values can cause truncation, so use labs() instead.
Reported by Clang 3.5 (-Wabsolute-value, enabled by -Wall).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using abs() on long values can cause truncation, so use labs() instead.
Reported by Clang 3.5 (-Wabsolute-value, enabled by -Wall).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the Linux open(2) man page, open() must return EISDIR
if a directory was attempted to be opened for writing. Our emulation
in mingw_open() does not get this right: it checks only for O_CREAT.
Fix it to check for a write request.
This fixes a failure in reflog handling, which opens files with
O_APPEND|O_WRONLY, but without O_CREAT, and expects EISDIR when the
named file happens to be a directory.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate 62 new messages came from git.pot update in 16742b0
(l10n: git.pot: proposed updates for v2.2.0 (+62)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
English grammar with German words doesn't make it a German translation. ;)
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
run_merge_tool() was not setting $status, which prevented the
exit code for builtin tools from being forwarded to the caller.
Capture the exit status and add a test to guarantee the behavior.
Reported-by: Adria Farres <14farresa@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make this test script appear somewhat less old-fashioned:
- Use test helper functions:
- write_script
- test_commit
- test_write_lines
- test_line_count
- test_config
- test_unconfig
- test_path_is_missing
- Remove whitespace between redirection operators and their targets.
- Move preparation of "expect" files into tests.
- Rename "output" files to "actual".
- More consistent quoting, especially around commands that might
expand to nothing.
- More visibility of important whitespace with ${indent}.
- Combine pairs of tests that unnecessarily split setup and verification.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Michael Blume <blume.mike@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing approxidate strings and we find three
numbers separate by one of ":/-.", we guess that it may be a
date. We feed the numbers to match_multi_number, which
checks whether it makes sense as a date in various orderings
(e.g., dd/mm/yy or mm/dd/yy, etc).
One of the checks we do is to see whether it is a date more
than 10 days in the future. This was added in 38035cf (date
parsing: be friendlier to our European friends.,
2006-04-05), and lets us guess that if it is currently April
2014, then "10/03/2014" is probably March 10th, not October
3rd.
This has a downside, though; if you want to be overly
generous with your "--until" date specification, we may
wrongly parse "2014-12-01" as "2014-01-12" (because the
latter is an in-the-past date). If the year is a future year
(i.e., both are future dates), it gets even weirder. Due to
the vagaries of approxidate, months _after_ the current date
(no matter the year) get flipped, but ones before do not.
This patch drops the "in the future" check for dates of this
form, letting us treat them always as yyyy-mm-dd, even if
they are in the future. This does not affect the normal
dd/mm/yyyy versus mm/dd/yyyy lookup, because this code path
only kicks in when the first number is greater than 70
(i.e., it must be a year, and cannot be either a date or a
month).
The one possible casualty is that "yyyy-dd-mm" is less
likely to be chosen over "yyyy-mm-dd". That's probably OK,
though because:
1. The difference happens only when the date is in the
future. Already we prefer yyyy-mm-dd for dates in the
past.
2. It's unclear whether anybody even uses yyyy-dd-mm
regularly. It does not appear in lists of common date
formats in Wikipedia[1,2].
3. Even if (2) is wrong, it is better to prefer ISO-like
dates, as that is consistent with what we use elsewhere
in git.
[1] http://en.wikipedia.org/wiki/Date_and_time_representation_by_country
[2] http://en.wikipedia.org/wiki/Calendar_date
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we "git checkout $tree", we pull paths from $tree into
the index, and then check the resulting entries out to the
worktree. Our method for the first step is rather
heavy-handed, though; it clobbers the entire existing index
entry, even if the content is the same. This means we lose
our stat information, leading checkout_entry to later
rewrite the entire file with identical content.
Instead, let's see if we have the identical entry already in
the index, in which case we leave it in place. That lets
checkout_entry do the right thing. Our tests cover two
interesting cases:
1. We make sure that a file which has no changes is not
rewritten.
2. We make sure that we do update a file that is unchanged
in the index (versus $tree), but has working tree
changes. We keep the old index entry, and
checkout_entry is able to realize that our stat
information is out of date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The approxidate functions accept an extra "now" parameter to
avoid calling time() themselves. We use this in our test
suite to make sure we have a consistent time for computing
relative dates. However, deep in the bowels of approxidate,
we also call time() to check whether possible dates are far
in the future. Let's make sure that the "now" override makes
it to that spot, too, so we can consistently test that
feature.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git status' doesn't output leading '#'s these days.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test misused a URL "file://." to mean "relative to here",
which we no longer accept.
In a file:// URL, typically there is no host, and RFC1738 says that
file:///<path> should be used.
Update t5705 to use a working URL.
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was a redundant code for a builtin command retrieval in
'handle_builtin()' and 'is_builtin()'.
Introduce a new function 'get_builtin()' and using it from
both of these places to reduce the redundancy.
Signed-off-by: Slavomir Vlcek <svlc@inventati.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an earlier part there is:
"re-send it with "To:" set to the maintainer [*1*] and "cc:" the list [*2*]"
for the final submission, but later we see
"Send it to the list and cc the maintainer."
Fix the later one to match the previous.
Signed-off-by: Slavomir Vlcek <svlc@inventati.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has gone through the trouble of explicitly adding an empty
note, then "git log" should not silently skip it (as if it didn't exist).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the "git notes" man page advertises that we support binary-safe
notes addition (using the -C option), we currently do not support adding
the empty note (i.e. using the empty blob to annotate an object). Instead,
an empty note is always treated as an intent to remove the note
altogether.
Introduce the --allow-empty option to the add/append/edit subcommands,
to explicitly allow an empty note to be stored into the notes tree.
Also update the documentation, and add test cases for the new option.
Reported-by: James H. Fisher <jhf@trifork.com>
Improved-by: Kyle J. McKay <mackyle@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
create_note() has a non-trivial interface, and comprises three loosely
related parts:
1. launching the editor with the note contents, if needed
2. appending to an existing note, if append_only was given
3. adding or removing the resulting note, based on whether it's non-empty
Split it along those lines to make the logic clearer: The first part
goes into a new function - prepare_note_data(), with a simpler interface.
The second part is moved into append_edit(), which is the only user of
this code. Finally, the add vs. remove decision is moved into the callers
(add() and append_edit()), keeping the logic for writing the actual note
object in a separate function: write_note_data().
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the need for 'retval' and the unnecessary goto. Also reorganize
to only call free_note_data() is actually needed.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, git-fast-import and -export link to each
other, and gitremote-helpers links to existing remote
helpers, and vice versa. Also link to fast-import from the
remote helper spec, as this is relevant for remote helpers
using the fast-import format.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly declare that git_atexit_dispatch() and git_atexit_clear()
take no parameters instead of leaving their parameter list empty and
thus unspecified.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the 'path' variable from create_note() and into the
note_data struct. Unify cleanup of note_data objects with
a free_note_data() function.
This might not make too much sense on its own, but it makes the
future refactoring of create_note() considerably cleaner.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for some needed refactoring, rename struct msg_arg to
struct note_data, and rename its instances from "msg" to "d" (also
removing some unnecessary parentheses). The 'msg_arg' name was
inherited from tag.c, but is not really a good name for the contents
of a note.
Also rename write_note_data() to copy_obj_to_fd(), which more aptly
describes what it actually does: Copying the contents of a git object
(given by its SHA1) into a given file descriptor.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases documenting the current behavior when trying to
add/append/edit empty notes. This is in preparation for adding
--allow-empty; to allow empty notes to be stored.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a small buglet when trying to explicitly add the empty blob
as a note object using the -c or -C option to git notes add/append.
Instead of failing with a nonsensical error message indicating that the
empty blob does not exist, we should rather behave as if an empty notes
message was given (e.g. using -m "" or -F /dev/null).
The next patch contains a test that verifies the fixed behavior.
Found-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing article at the beginning of a sentence, and rephrase
slightly.
Signed-off-by: Thomas Quinot <thomas@quinot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert users of struct child_process to using the managed argv_array
args instead of providing their own. This shortens the code a bit and
ensures that the allocated memory is released automatically after use.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initialize the struct child_process variable cp at declaration time.
This is shorter, saves a function call and prevents using the variable
before initialization by mistake.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
