When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to spend more than necessary cycles allocating and freeing
piece of memory while writing each index entry out. This has been
optimized.
* kw/write-index-reduce-alloc:
read-cache: avoid allocating every ondisk entry when writing
read-cache: fix memory leak in do_write_index
perf: add test for writing the index
Currently, sha1_file.c and cache.h contain many functions, both related
to and unrelated to packfiles. This makes both files very large and
causes an unclear separation of concerns.
Create a new file, packfile.c, to hold all packfile-related functions
currently in sha1_file.c. It has a corresponding header packfile.h.
In this commit, the pack name-related functions are moved. Subsequent
commits will move the other functions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These used to be for manipulating the in-memory repo_tree structure,
but nowadays they are convenience wrappers to handle a few git-vs-svn
mismatches:
1. Git does not track empty directories but Subversion does. When
looking up a path in git that Subversion thinks exists and finding
nothing, we can safely assume that the path represents a
directory. This is needed when a later Subversion revision
modifies that directory.
2. Subversion allows deleting a file by copying. In Git fast-import
we have to handle that more explicitly as a deletion.
These are details of the tool's interaction with git fast-import.
Move them to fast_export.c, where other such details are handled.
This way the function names do not start with a repo_ prefix that
would clash with the repository object introduced in
v2.14.0-rc0~38^2~16 (repository: introduce the repository object,
2017-06-22) or an svn_ prefix that would clash with libsvn (in case
someone wants to link this code with libsvn some day).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "ref-store" code reorganization continues.
* mh/packed-ref-store: (32 commits)
files-backend: cheapen refname_available check when locking refs
packed_ref_store: handle a packed-refs file that is a symlink
read_packed_refs(): die if `packed-refs` contains bogus data
t3210: add some tests of bogus packed-refs file contents
repack_without_refs(): don't lock or unlock the packed refs
commit_packed_refs(): remove call to `packed_refs_unlock()`
clear_packed_ref_cache(): don't protest if the lock is held
packed_refs_unlock(), packed_refs_is_locked(): new functions
packed_refs_lock(): report errors via a `struct strbuf *err`
packed_refs_lock(): function renamed from lock_packed_refs()
commit_packed_refs(): use a staging file separate from the lockfile
commit_packed_refs(): report errors rather than dying
packed_ref_store: make class into a subclass of `ref_store`
packed-backend: new module for handling packed references
packed_read_raw_ref(): new function, replacing `resolve_packed_ref()`
packed_ref_store: support iteration
packed_peel_ref(): new function, extracted from `files_peel_ref()`
repack_without_refs(): take a `packed_ref_store *` parameter
get_packed_ref(): take a `packed_ref_store *` parameter
rollback_packed_refs(): take a `packed_ref_store *` parameter
...
A performance test for writing the index to be able to
determine if changes to allocating ondisk structure help.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We started using "%" PRItime, imitating "%" PRIuMAX and friends, as
a way to format the internal timestamp value, but this does not
play well with gettext(1) i18n framework, and causes "make pot"
that is run by the l10n coordinator to create a broken po/git.pot
file. This is a possible workaround for that problem.
* jc/po-pritime-fix:
Makefile: help gettext tools to cope with our custom PRItime format
A recent update made it easier to use "-fsanitize=" option while
compiling but supported only one sanitize option. Allow more than
one to be combined, joined with a comma, like "make SANITIZE=foo,bar".
* jk/build-with-asan:
Makefile: allow combining UBSan with other sanitizers
We started using our own timestamp_t type and PRItime format
specifier to go along with it, so that we can later change the
underlying type and output format more easily, but this does not
play well with gettext tools.
Because gettext tools need to keep the *.po file portable across
platforms, they have to special-case the format specifiers like
PRIuMAX that are known types in inttypes.h, instead of letting CPP
handle strings like
"%" PRIuMAX " seconds ago"
as an ordinary string concatenation. They fundamentally cannot do
the same for our own custom type/format.
Given that po/git.pot needs to be generated only once every release
and by only one person, i.e. the l10n coordinator, let's update the
Makefile rule to generate po/git.pot so that gettext tools are run
on a munged set of sources in which all mentions of PRItime are
replaced with PRIuMAX, which is what we happen to use right now.
This way, developers do not have to care that PRItime does not play
well with gettext, and translators do not have to care that we use
our own PRItime.
The credit for the idea to munge the source files goes to Dscho.
Possible bugs are mine.
Helped-by: Jiang Xin <worldhello.net@gmail.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple sanitizers can be specified as a comma-separated list. Set
the flag NO_UNALIGNED_LOADS even if UndefinedBehaviorSanitizer is not
the only sanitizer to build with.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure has been improved to allow building and testing
Git with address sanitizer more easily.
* jk/build-with-asan:
Makefile: disable unaligned loads with UBSan
Makefile: turn off -fomit-frame-pointer with sanitizers
Makefile: add helper for compiling with -fsanitize
test-lib: turn on ASan abort_on_error by default
test-lib: set ASAN_OPTIONS variable before we run git
The "collission-detecting" implementation of SHA-1 hash we borrowed
from is replaced by directly binding the upstream project as our
submodule. Glitches on minority platforms are still being worked out.
* ab/sha1dc:
sha1collisiondetection: automatically enable when submodule is populated
sha1dc: optionally use sha1collisiondetection as a submodule
The undefined behavior sanitizer complains about unaligned
loads, even if they're OK for a particular platform in
practice. It's possible that they _are_ a problem, of
course, but since it's a known tradeoff the UBSan errors are
just noise.
Let's quiet it automatically by building with
NO_UNALIGNED_LOADS when SANITIZE=undefined is in use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ASan manual recommends disabling this optimization, as
it can make the backtraces produced by the tool harder to
follow (and since this is a test-debug build, we don't care
about squeezing out every last drop of performance).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can already build and test with ASan by doing:
make CFLAGS=-fsanitize=address test
but there are a few slight annoyances:
1. It's a little long to type.
2. It override your CFLAGS completely. You'd probably
still want -O2, for instance.
3. It's a good idea to also turn off "recovery", which
lets the program keep running after a problem is
detected (with the intention of finding as many bugs as
possible in a given run). Since Git's test suite should
generally run without triggering any problems, it's
better to abort immediately and fail the test when we
do find an issue.
With this patch, all of that happens automatically when you
run:
make SANITIZE=address test
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a "repository" object to eventually make it easier to
work in multiple repositories (the primary focus is to work with
the superproject and its submodules) in a single process.
* bw/repo-object:
ls-files: use repository object
repository: enable initialization of submodules
submodule: convert is_submodule_initialized to work on a repository
submodule: add repo_read_gitmodules
submodule-config: store the_submodule_cache in the_repository
repository: add index_state to struct repo
config: read config from a repository object
path: add repo_worktree_path and strbuf_repo_worktree_path
path: add repo_git_path and strbuf_repo_git_path
path: worktree_git_path() should not use file relocation
path: convert do_git_path to take a 'struct repository'
path: convert strbuf_git_common_path to take a 'struct repository'
path: always pass in commondir to update_common_dir
path: create path.h
environment: store worktree in the_repository
environment: place key repository state in the_repository
repository: introduce the repository object
environment: remove namespace_len variable
setup: add comment indicating a hack
setup: don't perform lazy initialization of repository state
If a user wants to experiment with the version of collision
detecting sha1 from the submodule, the user needed to not just
populate the submodule but also needed to turn the knob.
A Makefile trick is easy enough to do so, so let's do this. When
somebody with a copy of the submodule populated wants not to use it,
that can be done by overriding it in config.mak or from the command
line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to use the sha1collisiondetection library from the
submodule in sha1collisiondetection/ instead of in the copy in the
sha1dc/ directory.
This allows us to try out the submodule in sha1collisiondetection
without breaking the build for anyone who's not expecting them as we
work out any kinks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the repository object 'struct repository' which can be used to
hold all state pertaining to a git repository.
Some of the benefits of object-ifying a repository are:
1. Make the code base more readable and easier to reason about.
2. Allow for working on multiple repositories, specifically
submodules, within the same process. Currently the process for
working on a submodule involves setting up an argv_array of options
for a particular command and then launching a child process to
execute the command in the context of the submodule. This is
clunky and can require lots of little hacks in order to ensure
correctness. Ideally it would be nice to simply pass a repository
and an options struct to a command.
3. Eliminating reliance on global state will make it easier to
enable the use of threading to improve performance.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the interface between `files_ref_store` and
`packed_ref_store` is relatively narrow, move the latter into a new
module, "refs/packed-backend.h" and "refs/packed-backend.c". It still
doesn't quite implement the `ref_store` interface, but it will soon.
This commit moves code around and adjusts its visibility, but doesn't
change anything.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "perl-compatible regular expression" support to enable JIT
and also allow linking with the newer PCRE v2 library.
* ab/pcre-v2:
grep: add support for PCRE v2
grep: un-break building with PCRE >= 8.32 without --enable-jit
grep: un-break building with PCRE < 8.20
grep: un-break building with PCRE < 8.32
grep: add support for the PCRE v1 JIT API
log: add -P as a synonym for --perl-regexp
grep: skip pthreads overhead when using one thread
grep: don't redundantly compile throwaway patterns under threading
We added an FREAD_READS_DIRECTORIES Makefile knob long ago
in cba22528f (Add compat/fopen.c which returns NULL on
attempt to open directory, 2008-02-08) to handle systems
where reading from a directory returned garbage. This works
by catching the problem at the fopen() stage and returning
NULL.
More recently, we found that there is a class of systems
(including Linux) where fopen() succeeds but fread() fails.
Since the solution is the same (having fopen return NULL),
they use the same Makefile knob as of e2d90fd1c
(config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and
FreeBSD, 2017-05-03).
This works fine except for one thing: the autoconf test in
configure.ac to set FREAD_READS_DIRECTORIES actually checks
whether fread succeeds. Which means that on Linux systems,
the knob isn't set (and we even override the config.mak.uname
default). t1308 catches the failure.
We can fix this by tweaking the autoconf test to cover both
cases. In theory we might care about the distinction between
the traditional "fread reads directories" case and the new
"fopen opens directories". But since our solution catches
the problem at the fopen stage either way, we don't actually
need to know the difference. The "fopen" case is a superset.
This does mean the FREAD_READS_DIRECTORIES name is slightly
misleading. Probably FOPEN_OPENS_DIRECTORIES would be more
accurate. But it would be disruptive to simply change the
name (people's existing build configs would fail), and it's
not worth the complexity of handling both. Let's just add a
comment in the knob description.
Reported-by: Øyvind A. Holm <sunny@sunbase.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal logic used in "git blame" has been libified to make it
easier to use by cgit.
* js/blame-lib: (29 commits)
blame: move entry prepend to libgit
blame: move scoreboard setup to libgit
blame: move scoreboard-related methods to libgit
blame: move fake-commit-related methods to libgit
blame: move origin-related methods to libgit
blame: move core structures to header
blame: create entry prepend function
blame: create scoreboard setup function
blame: create scoreboard init function
blame: rework methods that determine 'final' commit
blame: wrap blame_sort and compare_blame_final
blame: move progress updates to a scoreboard callback
blame: make sanity_check use a callback in scoreboard
blame: move no_whole_file_rename flag to scoreboard
blame: move xdl_opts flags to scoreboard
blame: move show_root flag to scoreboard
blame: move reverse flag to scoreboard
blame: move contents_from to scoreboard
blame: move copy/move thresholds to scoreboard
blame: move stat counters to scoreboard
...
The "collision detecting" SHA-1 implementation shipped with 2.13
was quite broken on some big-endian platforms and/or platforms that
do not like unaligned fetches. Update to the upstream code which
has already fixed these issues.
* ab/sha1dc-maint:
sha1dc: update from upstream
The internal implementation of "git grep" has seen some clean-up.
* ab/grep-preparatory-cleanup: (31 commits)
grep: assert that threading is enabled when calling grep_{lock,unlock}
grep: given --threads with NO_PTHREADS=YesPlease, warn
pack-objects: fix buggy warning about threads
pack-objects & index-pack: add test for --threads warning
test-lib: add a PTHREADS prerequisite
grep: move is_fixed() earlier to avoid forward declaration
grep: change internal *pcre* variable & function names to be *pcre1*
grep: change the internal PCRE macro names to be PCRE1
grep: factor test for \0 in grep patterns into a function
grep: remove redundant regflags assignments
grep: catch a missing enum in switch statement
perf: add a comparison test of log --grep regex engines with -F
perf: add a comparison test of log --grep regex engines
perf: add a comparison test of grep regex engines with -F
perf: add a comparison test of grep regex engines
perf: emit progress output when unpacking & building
perf: add a GIT_PERF_MAKE_COMMAND for when *_MAKE_OPTS won't do
grep: add tests to fix blind spots with \0 patterns
grep: prepare for testing binary regexes containing rx metacharacters
grep: add a test helper function for less verbose -f \0 tests
...
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend my change earlier in this series ("grep: add support for the
PCRE v1 JIT API", 2017-04-11) to un-break the build on PCRE v1
versions later than 8.31 compiled without --enable-jit.
As explained in that change and a later compatibility change in this
series ("grep: un-break building with PCRE < 8.32", 2017-05-10) the
pcre_jit_exec() function is a faster path to execute the JIT.
Unfortunately there's no compatibility stub for that function compiled
into the library if pcre_config(PCRE_CONFIG_JIT, &ret) would return 0,
and no macro that can be used to check for it, so the only portable
option to support builds without --enable-jit is via a new
NO_LIBPCRE1_JIT=UnfortunatelyYes Makefile option[1].
Another option would be to make the JIT opt-in via
USE_LIBPCRE1_JIT=YesPlease, after all it's not a default option of
PCRE v1.
I think it makes more sense to make it opt-out since even though it's
not a default option, most packagers of PCRE seem to turn it on by
default, with the notable exception of the MinGW package.
Make the MinGW platform work by default by changing the build defaults
to turn on NO_LIBPCRE1_JIT=UnfortunatelyYes. It is the only platform
that turns on USE_LIBPCRE=YesPlease by default, see commit
df5218b4c3 ("config.mak.uname: support MSys2", 2016-01-13) for that
change.
1. "How do I support pcre1 JIT on all
versions?" (https://lists.exim.org/lurker/thread/20170601.103148.10253788.en.html)
2. https://github.com/Alexpux/MINGW-packages/blob/master/mingw-w64-pcre/PKGBUILD
(referenced from "Re: PCRE v2 compile error, was Re: What's cooking
in git.git (May 2017, #01; Mon, 1)";
<alpine.DEB.2.20.1705021756530.3480@virtualbox>)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code from "conversion using external process" codepath has been
extracted to a separate sub-process.[ch] module.
* bp/sub-process-convert-filter:
convert: update subprocess_read_status() to not die on EOF
sub-process: move sub-process functions into separate files
convert: rename reusable sub-process functions
convert: update generic functions to only use generic data structures
convert: separate generic structures and variables from the filter specific ones
convert: split start_multi_file_filter() into two separate functions
pkt-line: annotate packet_writel with LAST_ARG_MUST_BE_NULL
convert: move packet_write_line() into pkt-line as packet_writel()
pkt-line: add packet_read_line_gently()
pkt-line: fix packet_read_line() to handle len < 0 errors
convert: remove erroneous tests for errno == EPIPE
Add a PTHREADS prerequisite which is false when git is compiled with
NO_PTHREADS=YesPlease.
There's lots of custom code that runs when threading isn't available,
but before this prerequisite there was no way to test it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the internal USE_LIBPCRE define, & build options flag to use a
naming convention ending in PCRE1, without changing the long-standing
USE_LIBPCRE Makefile flag which enables this code.
This is for preparation for libpcre2 support where having things like
USE_LIBPCRE and USE_LIBPCRE2 in any more places than we absolutely
need to for backwards compatibility with old Makefile arguments would
be confusing.
In some ways it would be better to change everything that now uses
USE_LIBPCRE to use USE_LIBPCRE1, and to make specifying
USE_LIBPCRE (or --with-pcre) an error. This would impose a one-time
burden on packagers of git to s/USE_LIBPCRE/USE_LIBPCRE1/ in their
build scripts.
However I'd like to leave the door open to making
USE_LIBPCRE=YesPlease eventually mean USE_LIBPCRE2=YesPlease,
i.e. once PCRE v2 is ubiquitous enough that it makes sense to make it
the default.
This code and the USE_LIBPCRE Makefile argument was added in commit
63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09). At the time there was
no indication that the PCRE project would release an entirely new &
incompatible API around 3 years later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update sha1dc from the latest version by the upstream
maintainer[1].
This version includes a commit of mine which allows for replacing the
local modifications done to the upstream files in git.git with macro
definitions to monkeypatch it in place.
It also brings in a change[2] upstream made for the breakage 2.13.0
introduced on SPARC and other platforms that forbid unaligned
access[3].
This means that the code customizations done since the initial import
in commit 28dc98e343 ("sha1dc: add collision-detecting sha1
implementation", 2017-03-16) can be done purely via Makefile
definitions and by including the content of our own sha1dc_git.[ch] in
sha1dc/sha1.c via a macro.
1. cc465543b3
2. 33a694a9ee
3. "Git 2.13.0 segfaults on Solaris SPARC due to DC_SHA1=YesPlease
being on by default"
(https://public-inbox.org/git/CACBZZX6nmKK8af0-UpjCKWV4R+hV-uk2xWXVA5U+_UQ3VXU03g@mail.gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a git GIT_PERF_MAKE_COMMAND variable to compliment the existing
GIT_PERF_MAKE_OPTS facility. This allows specifying an arbitrary shell
command to execute instead of 'make'.
This is useful e.g. in cases where the name, semantics or defaults of
a Makefile flag have changed over time. It can even be used to change
the contents of the tree, useful for monkeypatching ancient versions
of git to get them to build.
This opens Pandora's box in some ways, it's now possible to
"jailbreak" the perf environment and e.g. modify the source tree via
this arbitrary instead of just issuing a custom "make" command, such a
command has to be re-entrant in the sense that subsequent perf runs
will re-use the possibly modified tree.
It would be pointless to try to mitigate or work around that caveat in
a tool purely aimed at Git developers, so this change makes no attempt
to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword an outdated & inaccurate comment which suggests that only
git-grep can use PCRE.
This comment was added back when PCRE support was initially added in
commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09), and was true
at the time.
It hasn't been telling the full truth since git-log learned to use
PCRE with --grep in commit 727b6fc3ed ("log --grep: accept
--basic-regexp and --perl-regexp", 2012-10-03), and more importantly
is likely to get more inaccurate over time as more use is made of PCRE
in other areas.
Reword it to be more future-proof, and to more clearly explain that
this enables user-initiated runtime behavior.
Copy/pasting this so much in configure.ac is lame, these Makefile-like
flags aren't even used by autoconf, just the corresponding
--with[out]-* options. But copy/pasting the comments that make sense
for the Makefile to configure.ac where they make less sense is the
pattern everything else follows in that file. I'm not going to war
against that as part of this change, just following the existing
pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the sub-proces functions into sub-process.h/c. Add documentation
for the new module in Documentation/technical/api-sub-process.txt
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internals of the refs API around the cached refs has been
streamlined.
* mh/separate-ref-cache:
do_for_each_entry_in_dir(): delete function
files_pack_refs(): use reference iteration
commit_packed_refs(): use reference iteration
cache_ref_iterator_begin(): make function smarter
get_loose_ref_cache(): new function
get_loose_ref_dir(): function renamed from get_loose_refs()
do_for_each_entry_in_dir(): eliminate `offset` argument
refs: handle "refs/bisect/" in `loose_fill_ref_dir()`
ref-cache: use a callback function to fill the cache
refs: record the ref_store in ref_cache, not ref_dir
ref-cache: introduce a new type, ref_cache
refs: split `ref_cache` code into separate files
ref-cache: rename `remove_entry()` to `remove_entry_from_dir()`
ref-cache: rename `find_ref()` to `find_ref_entry()`
ref-cache: rename `add_ref()` to `add_ref_entry()`
refs_verify_refname_available(): use function in more places
refs_verify_refname_available(): implement once for all backends
refs_ref_iterator_begin(): new function
refs_read_raw_ref(): new function
get_ref_dir(): don't call read_loose_refs() for "refs/bisect"
"git checkout" that handles a lot of paths has been optimized by
reducing the number of unnecessary checks of paths in the
has_dir_name() function.
* jh/add-index-entry-optim:
read-cache: speed up has_dir_name (part 2)
read-cache: speed up has_dir_name (part 1)
read-cache: speed up add_index_entry during checkout
p0006-read-tree-checkout: perf test to time read-tree
read-cache: add strcmp_offset function
Hotfix for a topic that is already in 'master'.
* jh/memihash-opt:
p0004: make perf test executable
t3008: skip lazy-init test on a single-core box
test-online-cpus: helper to return cpu count
name-hash: fix buffer overrun
The "submodule" specific field in the ref_store structure is
replaced with a more generic "gitdir" that can later be used also
when dealing with ref_store that represents the set of refs visible
from the other worktrees.
* nd/files-backend-git-dir: (28 commits)
refs.h: add a note about sorting order of for_each_ref_*
t1406: new tests for submodule ref store
t1405: some basic tests on main ref store
t/helper: add test-ref-store to test ref-store functions
refs: delete pack_refs() in favor of refs_pack_refs()
files-backend: avoid ref api targeting main ref store
refs: new transaction related ref-store api
refs: add new ref-store api
refs: rename get_ref_store() to get_submodule_ref_store() and make it public
files-backend: replace submodule_allowed check in files_downcast()
refs: move submodule code out of files-backend.c
path.c: move some code out of strbuf_git_path_submodule()
refs.c: make get_main_ref_store() public and use it
refs.c: kill register_ref_store(), add register_submodule_ref_store()
refs.c: flatten get_ref_store() a bit
refs: rename lookup_ref_store() to lookup_submodule_ref_store()
refs.c: introduce get_main_ref_store()
files-backend: remove the use of git_path()
files-backend: add and use files_ref_path()
files-backend: add and use files_reflog_path()
...
Update the build dependency so that an update to /usr/bin/perl
etc. result in recomputation of perl.mak file.
* ab/regen-perl-mak-with-different-perl:
perl: regenerate perl.mak if perl -V changes
The `ref_cache` code is currently too tightly coupled to
`files-backend`, making the code harder to understand and making it
awkward for new code to use `ref_cache` (as we indeed have planned).
Start loosening that coupling by splitting `ref_cache` into a separate
module.
This commit moves code, adds declarations, and changes the visibility
of some functions, but doesn't change any code.
The modules are still too tightly coupled, but the situation will be
improved in subsequent commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strcmp_offset() function to also return the offset of the
first change.
Add unit test and helper to verify.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created helper executable to print the value of online_cpus()
allowing multi-threaded tests to be skipped when appropriate.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the perl/perl.mak build process so that the file is regenerated
if the output of "perl -V" changes.
Before this change updating e.g. /usr/bin/perl to a new major version
would cause the next "make" command to fail, since perl.mak has
hardcoded paths to perl library paths retrieved from its first run.
Now the logic added in commit ee9be06770 ("perl: detect new files in
MakeMaker builds", 2012-07-27) is extended to regenerate
perl/perl.mak if there's any change to "perl -V".
This will in some cases redundantly trigger perl/perl.mak to be
re-made, e.g. if @INC is modified in ways the build process doesn't
care about through sitecustomize.pl, but the common case is that we
just do the right thing and re-generate perl/perl.mak when needed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "make coccicheck" target runs spatch against each source
file. But it does so in a for loop, so "make" never sees the
exit code of spatch. Worse, it redirects stderr to a log
file, so the user has no indication of any failure. And then
to top it all off, because we touched the patch file's
mtime, make will refuse to repeat the command because it
think the target is up-to-date.
So for example:
$ make coccicheck SPATCH=does-not-exist
SPATCH contrib/coccinelle/free.cocci
SPATCH contrib/coccinelle/qsort.cocci
SPATCH contrib/coccinelle/xstrdup_or_null.cocci
SPATCH contrib/coccinelle/swap.cocci
SPATCH contrib/coccinelle/strbuf.cocci
SPATCH contrib/coccinelle/object_id.cocci
SPATCH contrib/coccinelle/array.cocci
$ make coccicheck SPATCH=does-not-exist
make: Nothing to be done for 'coccicheck'.
With this patch, you get:
$ make coccicheck SPATCH=does-not-exist
SPATCH contrib/coccinelle/free.cocci
/bin/sh: 4: does-not-exist: not found
Makefile:2338: recipe for target 'contrib/coccinelle/free.cocci.patch' failed
make: *** [contrib/coccinelle/free.cocci.patch] Error 1
It also dumps the log on failure, so any errors from spatch
itself (like syntax errors in our .cocci files) will be seen
by the user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
