Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
Currently, 'git merge --continue' is mentioned but not explained.
Explain it.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing the index for each entry an ondisk struct will be
allocated and freed in ce_write_entry. We can do better by
using a ondisk struct on the stack for each entry.
This is accomplished by using a stack ondisk_cache_entry_extended
outside looping through the entries in do_write_index. Only the
fixed fields of this struct are used when writing and depending on
whether it is extended or not the flags2 field will be written.
The name field is not used and instead the cache_entry name field
is used directly when writing out the name. Because ce_write is
using a buffer and memcpy to fill the buffer before flushing to disk,
we don't have to worry about doing multiple ce_write calls.
Running the p0007-write-cache.sh tests would save anywhere
between 3-7% when the index had over a million entries with no
performance degradation on small repos.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous_name_buf was never getting released when there
was an error in ce_write_entry or allow was false and execution
was returned to the caller.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A performance test for writing the index to be able to
determine if changes to allocating ondisk structure help.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were several functions in the Subversion code that started with
"repo_". This namespace is also used by the Git struct repository code.
Rename these functions to start with "svn_repo" to avoid any future
conflicts.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Subversion code had prototypes for several functions which were not
ever defined or used. These functions all had names starting with
"repo_", some of which conflict with those in repository.h. To avoid
the conflict, remove those unused prototypes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Saying "the this" is an obvious typo. But while we're here,
let's polish the English on the second half of the sentence,
too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All that we are really testing here is that the message is
correct when we are not on any branch. All other functionality is
already tested elsewhere.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the return value of merge recursive is not checked, the stash could end
up being dropped even though it was not applied properly
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to expose the full power of the delayed progress API to the
callers, so that they can specify, not just the message to show and
expected total amount of work that is used to compute the percentage
of work performed so far, the percent-threshold parameter P and the
delay-seconds parameter N. The progress meter starts to show at N
seconds into the operation only if we have not yet completed P per-cent
of the total work.
Most callers used either (0%, 2s) or (50%, 1s) as (P, N), but there
are oddballs that chose more random-looking values like 95%.
For a smoother workload, (50%, 1s) would allow us to start showing
the progress meter earlier than (0%, 2s), while keeping the chance
of not showing progress meter for long running operation the same as
the latter. For a task that would take 2s or more to complete, it
is likely that less than half of it would complete within the first
second, if the workload is smooth. But for a spiky workload whose
earlier part is easier, such a setting is likely to fail to show the
progress meter entirely and (0%, 2s) is more appropriate.
But that is merely a theory. Realistically, it is of dubious value
to ask each codepath to carefully consider smoothness of their
workload and specify their own setting by passing two extra
parameters. Let's simplify the API by dropping both parameters and
have everybody use (0%, 2s).
Oh, by the way, the percent-threshold parameter and the structure
member were consistently misspelled, which also is now fixed ;-)
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file had been commited with CRLF but now .gitattributes say
"* text=auto" (or core.autocrlf is true), the following does not
roundtrip, `git apply` fails:
printf "Added line\r\n" >>file &&
git diff >patch &&
git checkout -- . &&
git apply patch
Before applying the patch, the file from working tree is converted
into the index format (clean filter, CRLF conversion, ...). Here,
when commited with CRLF, the line endings should not be converted.
Note that `git apply --index` or `git apply --cache` doesn't call
convert_to_git() because the source material is already in index
format.
Analyze the patch if there is a) any context line with CRLF, or b)
if any line with CRLF is to be removed. In this case the patch file
`patch` has mixed line endings, for a) it looks like this:
diff --git a/one b/one
index 533790e..c30dea8 100644
--- a/one
+++ b/one
@@ -1 +1,2 @@
a\r
+b\r
And for b) it looks like this:
diff --git a/one b/one
index 533790e..485540d 100644
--- a/one
+++ b/one
@@ -1 +1 @@
-a\r
+b\r
If `git apply` detects that the patch itself has CRLF, (look at the
line " a\r" or "-a\r" above), the new flag crlf_in_old is set in
"struct patch" and two things will happen:
- read_old_data() will not convert CRLF into LF by calling
convert_to_git(..., SAFE_CRLF_KEEP_CRLF);
- The WS_CR_AT_EOL bit is set in the "white space rule",
CRLF are no longer treated as white space.
While at there, make it clear that read_old_data() in apply.c knows
what it wants convert_to_git() to do with respect to CRLF. In fact,
this codepath is about applying a patch to a file in the filesystem,
which may not exist in the index, or may exist but may not match
what is recorded in the index, or in the extreme case, we may not
even be in a Git repository. If convert_to_git() peeked at the
index while doing its work, it *would* be a bug.
Pass NULL instead of &the_index to convert_to_git() to make sure we
catch future bugs to clarify this.
Update the test in t4124: split one test case into 3:
- Detect the " a\r" line in the patch
- Detect the "-a\r" line in the patch
- Use LF in repo and CLRF in the worktree.
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
53b2c823f6 (revision walker: mini clean-up) added the function in 2007,
but it was never used, so we should be able to get rid of it now.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reject directories with the attribute export-ignore already while
queuing them. This prevents read_tree_recursive() from descending into
them and this avoids write_archive_entry() rejecting them later on,
which queue_or_write_archive_entry() is not prepared for.
Borrow the existing strbuf to build the full path to avoid string
copies and extra allocations; just make sure we restore the original
value before moving on.
Keep checking any other attributes in write_archive_entry() as before,
but avoid checking them twice.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add helpers for accessing attributes that encapsulate the details of how
to retrieve their values.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Demonstrate mishandling of the attribute export-ignore by git archive
when used together with pathspecs. Wildcard pathspecs can even cause it
to abort. And a directory excluded without a wildcard is still included
as an empty folder in the archive.
Test-case-by: David Adam <zanchey@ucc.gu.uwa.edu.au>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Old implementation determined number of hashes by dividing length of
line by length of hash, which works only if all hash representations
have same length.
New graft line parser works in two phases:
1. In first phase line is scanned to verify correctness and compute
number of hashes, then graft struct is allocated.
2. In second phase line is scanned again to fill up already allocated
graft struct.
This way graft parsing code can support different sizes of hashes
without any further code adaptations.
A number of alternative implementations were considered and discarded:
- Modifying graft structure to store oid_array instead of FLEXI_ARRAY
indicates undesirable usage of struct to readers.
- Parsing into temporary string_list or oid_array complicates code
by adding more return paths, as these structures needs to be
cleared before returning from function.
- Determining number of hashes by counting separators might cause
maintenance issues, if this function needs to be modified in future
again.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
struct commit_graft aggregates an array of object_id's, which have
size >= GIT_MAX_RAWSZ bytes. This change prevents memory allocation
error when size of object_id is larger than GIT_SHA1_RAWSZ.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies function declaration and allows for use of strbuf_rtrim
instead of modifying buffer directly.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`*` in format strings means peeling of tag objects so that object field
names refer to the object that the tag object points at, instead of the
tag object itself.
Currently, this is documented using grammar that is clearly inspired by
classical latin, though missing more than an article in order to be
classical english.
Try and straighten that explanation out a bit.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various commands list refs and allow to use a format string for the
output that interpolates from the ref as well as the object it points
at (for-each-ref; branch and tag in list mode).
Currently, the documentation talks about interpolating from the object.
This is confusing because a ref points to an object but not vice versa,
so the object cannot possible know %(refname), for example. Thus, this is
wrong independent of refs being objects (one day, maybe) or not.
Change the wording to make this clearer (and distinguish it from formats
for the log family).
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The array is declared in cache.h as:
extern const unsigned char null_sha1[GIT_MAX_RAWSZ];
Definition in sha1_file.c must match.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of `status_only` no longer interferes with the handling of
`unmatch_name_only`. `--quiet` no longer affects the exit code when using
`-L`/`--files-without-match`.
Signed-off-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long time ago, 23707811 ("diff: do not chomp hunk-header in the
middle of a character", 2008-01-02) introduced sane_truncate_line()
helper function to trim the "function header" line that is shown at
the end of the hunk header line, in order to avoid chomping it in
the middle of a single UTF-8 character. It also added a facility to
define a custom callback function to make it possible to extend it
to non UTF-8 encodings.
During the following 8 1/2 years, nobody found need for this custom
callback facility.
A custom callback function is a wrong design to use here anyway---if
your contents need support for non UTF-8 encoding, you shouldn't
have to write a custom function and recompile Git to plumb it in. A
better approach would be to extend sane_truncate_line() function and
have a new member in emit_callback to conditionally trigger it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When locking references in preparation for updating them, we need to
check that none of the newly added references D/F conflict with
existing references (e.g., we don't allow `refs/foo` to be added if
`refs/foo/bar` already exists, or vice versa).
Prior to 524a9fdb51 (refs_verify_refname_available(): use function in
more places, 2017-04-16), conflicts with existing loose references
were checked by looking directly in the filesystem, and then conflicts
with existing packed references were checked by running
`verify_refname_available_dir()` against the packed-refs cache.
But that commit changed the final check to call
`refs_verify_refname_available()` against the *whole* files ref-store,
including both loose and packed references, with the following
comment:
> This means that those callsites now check for conflicts with all
> references rather than just packed refs, but the performance cost
> shouldn't be significant (and will be regained later).
That comment turned out to be too sanguine. User s@kazlauskas.me
reported that fetches involving a very large number of references in
neighboring directories were slowed down by that change.
The problem is that when fetching, each reference is updated
individually, within its own reference transaction. This is done
because some reference updates might succeed even though others fail.
But every time a reference update transaction is finished,
`clear_loose_ref_cache()` is called. So when it is time to update the
next reference, part of the loose ref cache has to be repopulated for
the `refs_verify_refname_available()` call. If the references are all
in neighboring directories, then the cost of repopulating the
reference cache increases with the number of references, resulting in
O(N²) effort.
The comment above also claims that the performance cost "will be
regained later". The idea was that once the packed-refs were finished
being split out into a separate ref-store, we could limit the
`refs_verify_refname_available()` call to the packed references again.
That is what we do now.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--set-upstream' option of branch was deprecated in b347d06b
("branch: deprecate --set-upstream and show help if we detect
possible mistaken use", 2012-08-30) and has been planned for removal
ever since.
In order to prevent "--set-upstream" on a command line from being taken as
an abbreviated form of "--set-upstream-to", explicitly catch "--set-upstream"
option and die, instead of just removing it from the list of options.
Before this change, an attempt to use "--set-upstream" resulted in:
$ git branch
* master
$ git branch --set-upstream origin/master
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
$ echo $?
0
$ git branch
* master
origin/master
With this change, the behaviour becomes like this:
$ git branch
* master
$ git branch --set-upstream origin/master
fatal: the '--set-upstream' option is no longer supported. Please use '--track' or '--set-upstream-to' instead.
$ echo $?
128
$ git branch
* master
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoiding the clean up step of tests may help in some cases but in other
cases they cause the other unrelated tests to fail for unobvious reasons.
It's better to cleanup a few things to keep other tests from failing
as a result of it.
So, cleanup a cruft left behind by an old test in order for the changes that
are to be introduced to be independent of it.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could have been part of 48308681b0 (git submodule update: have a
dedicated helper for cloning, 2016-02-29).
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing behavior of diff --color-moved=zebra does not define the
minimum size of a block at all, instead relying on a heuristic applied
later to filter out sets of adjacent moved lines that are shorter than 3
lines long. This can be confusing, because a block could thus be colored
as moved at the source but not at the destination (or vice versa),
depending on its neighbors.
Instead, teach diff that the minimum size of a block is 20 alphanumeric
characters, the same heuristic used by "git blame". This allows diff to
still exclude uninteresting lines appearing on their own (such as those
solely consisting of one or a few closing braces), as was the intention
of the adjacent-moved-line heuristic.
This requires a change in some tests in that some of their lines are no
longer considered to be part of a block, because they are too short.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, MIN_BLOCK_LENGTH is only checked when diff encounters a line
that does not belong to the current block. In particular, this means
that MIN_BLOCK_LENGTH is not checked after all lines are encountered.
Perform that check.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When convert_to_git() is called, the caller may want to keep CRLF to
be kept as CRLF (and not converted into LF).
This will be used in the next commit, when apply works with files
that have CRLF and patches are applied onto these files.
Add the new value "SAFE_CRLF_KEEP_CRLF" to safe_crlf.
Prepare convert_to_git() to be able to run the clean filter, skip
the CRLF conversion and run the ident filter.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is not a pre-commit hook, there is no reason to discard
the index and reread it.
This change checks to presence of a pre-commit hook and then only
discards the index if there was one.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In handshake_capabilities() we use warning() when a capability
is not supported, so the exit code of the function is 0 and no
further error is shown. This is a problem because the warning
message doesn't tell us which subprocess cmd failed.
On the contrary if we cannot write a packet from this function,
we use error() and then subprocess_start() outputs:
initialization for subprocess '<cmd>' failed
so we can know which subprocess cmd failed.
Let's improve the warning() message, so that we can know which
subprocess cmd failed.
Helped-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_info_alternates is not used from outside, so let's make it static.
We have to declare the function before link_alt_odb_entry instead of
moving the code around, link_alt_odb_entry calls read_info_alternates,
which in turn calls link_alt_odb_entry.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sum(1) is a command for calculating checksums of the contents of files.
It was part of early editions of Unix ("Research Unix", 1972/1973, [1]).
cksum(1) appeared in 4.4BSD (1993) as a replacement [2], and became part
of POSIX.1-2008 [3]. OpenBSD 5.6 (2014) removed sum(1).
We only use sum(1) in t1002 to check for changes in three files. On
MinGW we use md5sum(1) instead. We could switch to the standard command
cksum(1) for all platforms; MinGW comes with GNU coreutils now, which
provides sum(1), cksum(1) and md5sum(1). Use our standard method for
checking for file changes instead: test_cmp.
It's more convenient because it shows differences nicely, it's faster on
MinGW because we have a special implementation there based only on
shell-internal commands, it's simpler as it allows us to avoid stripping
out unnecessary entries from the checksum file using grep(1), and it's
more consistent with the rest of the test suite.
We already compare changed files with their expected new contents using
diff(1), so we don't need to check with "test_must_fail test_cmp" if
they differ from their original state. A later patch could convert the
direct diff(1) calls to test_cmp as well.
With all sum(1) calls gone, remove the MinGW-specific implementation
from test-lib.sh as well.
[1] http://minnie.tuhs.org/cgi-bin/utree.pl?file=V3/man/man1/sum.1
[2] http://minnie.tuhs.org/cgi-bin/utree.pl?file=4.4BSD/usr/share/man/cat1/cksum.0
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/cksum.html
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret-trailers command recently learned some options
to make its output easier to parse (for a caller whose only
interested in picking out the trailer values). But it's not
very efficient for asking for the trailers of many commits
in a single invocation.
We already have "%(trailers)" to do that, but it doesn't
know about unfolding or omitting non-trailers. Let's plumb
those options through, so you can have the best of both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have one test for %(trailers). In preparation
for more, let's refactor a few bits:
- move the commit creation to its own setup step so it can
be reused by multiple tests
- add a trailer with whitespace continuation (to confirm
that it is left untouched)
- fix the sample text which claims the placeholder is %bT.
This was switched long ago to %(trailers)
- replace one "cat" with an "echo" when generating the
expected output. This saves a process (and sets a better
pattern for future tests to follow).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit will add many features to the %(trailer)
placeholder in pretty.c. We'll need to access some internal
functions of trailer.c for that, so our options are either:
1. expose those functions publicly
or
2. make an entry point into trailer.c to do the formatting
Doing (2) ends up exposing less surface area, though do note
that caveats in the docstring of the new function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last few commits have added command line options that
can turn interpret-trailers into a parsing tool. Since
they'd most often be used together, let's provide a
convenient single option for callers to invoke this mode.
This is implemented as a callback rather than a boolean so
that its effect is applied immediately, as if those options
had been specified. Later options can then override them.
E.g.:
git interpret-trailers --parse --no-unfold
would work.
Let's also update the documentation to make clear that this
parsing mode behaves quite differently than the normal
"add trailers to the input" mode.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
