Use the macro FREE_AND_NULL to release memory allocated for
'head_name' and clear its pointer.
Patch generated with 'contrib/coccinelle/free.cocci' and Coccinelle
v1.0.7 (previous Coccinelle versions don't notice this).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git blame' is invoked without specifying the commit to start
blaming from, it starts from the given file's state in the work tree.
However, when invoked in a bare repository without a start commit,
then there is no work tree state to start from, and it dies with the
following error message:
$ git rev-parse --is-bare-repository
true
$ git blame file.c
fatal: this operation must be run in a work tree
This is misleading, because it implies that 'git blame' doesn't work
in bare repositories at all, but it does, in fact, work just fine when
it is given a commit to start from.
We could improve the error message, of course, but let's just default
to HEAD in a bare repository instead, as most likely that is what the
user wanted anyway (if they wanted to start from an other commit, then
they would have specified that in the first place).
'git annotate' is just a thin wrapper around 'git blame', so in the
same situation it printed the same misleading error message, and this
patch fixes it, too.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
struct stat_data and struct cache_time both use unsigned ints for all
their members. However the format string for 'git ls-files --debug'
currently uses %d for formatting these numbers. This means that we
potentially print these values incorrectly if they are greater than
INT_MAX.
This has been the case since the --debug option was introduced in 'git
ls-files' in 8497421715 ("ls-files: learn a debugging dump format",
2010-07-31).
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
struct diff_filespec defines mode to be an 'unsigned short'. Several
other places in the API which we'd like to interact with using a
diff_filespec used a plain unsigned (or unsigned int). This caused
problems when taking addresses, so switch to unsigned short.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap usage line at '<tagname>'. Also, wrap strings with '\n' at the end
of string fragments instead of at the beginning of the next string
fragment.
Convert a space-indent into a tab-indent for style.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switching and creating branches always involves knowing the
<start-point> to begin the new branch from. Sometimes, people want to
create a new branch that does not have any commits yet; --orphan is a
flag to allow that.
--orphan overrides the default of HEAD for <start-point> instead causing
us to start from an empty history with all tracked files removed from
the index and working tree. The use of --orphan is incompatible with
specifying a <start-point>.
A note on the implementation. An alternative is just create a dummy
commit in-core with empty tree and switch to it. But there's a chance
the commit's SHA-1 may end up somewhere permanent like reflog. It's best
to make sure "commit" pointer is NULL to avoid it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless you know what you're doing, switching to another branch to do
something then switching back could be confusing. Worse, you may even
forget that you're in the middle of something. By the time you realize,
you may have done a ton of work and it gets harder to go back.
A new option --ignore-in-progress was considered but dropped because it
was not exactly clear what should happen. Sometimes you can switch away
and get back safely and resume the operation. Sometimes not. And the
git-checkout behavior is automatically clear merge/revert/cherry-pick,
which makes it a bit even more confusing [1].
We may revisit and add this option in the future. But for now play it
safe and not allow it (you can't even skip this check with --force). The
user is suggested to cancel the operation by themselves (and hopefully
they do consider the consequences, not blindly type the command), or to
create a separate worktree instead of switching. The third option is
the good old "git checkout", but it's not mentioned.
[1] CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we switch from one branch to another, it makes sense to show a
summary of local changes since there could be conflicts, or some files
left modified.... When switch is used solely for creating a new
branch (and "switch" to the same commit) or detaching, we don't really
need to show anything.
"git checkout" does it anyway for historical reasons. But we can start
with a clean slate with switch and don't have to.
This essentially reverts fa655d8411 (checkout: optimize "git checkout
-b <new_branch>" - 2018-08-16) and make it default for switch,
but also for -B and --detach. Users of big repos are encouraged to
move to switch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is already the default in git-checkout. The real change in here is
just minor cleanup. The main excuse is to explain why dwim is kept default.
Contrary to detach mode that is easy to get into and confusing to get
back out. Automatically creating a tracking branch often does not kick
in as often (you would need a branch of the same name on a remote). And
since the branch creation is reported clearly, the user should be able
to undo/delete it if it's unwanted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" automatically detaches branches and --detach is not
that useful (--no-detach is more likely). But for "switch", you
may want to use it more often once you're used to detached HEAD. This
of course adds -d to git-checkout but it does not harm (yet?) to do it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout <commit>" will checkout the commit in question and
detach HEAD from the current branch. It is naturally a right thing to
do once you get git references. But detached HEAD is a scary concept
to new users because we show a lot of warnings and stuff, and it could
be hard to get out of (until you know better).
To keep switch a bit more friendly to new users, we only allow
entering detached HEAD mode when --detach is given. "git
switch" must take a branch (unless you create a new branch,
then of course switch can take any commit-ish)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" can be executed without any arguments. What it does is
not exactly great: it switches from HEAD to HEAD and shows worktree
modification as a side effect.
Make switch reject this case. Just use "git status" if you want
that side effect. For switch, you have to either
- really switch a branch
- (explicitly) detach from the current branch
- create a new branch
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command is about switching branch (or creating a new one) and
should not accept pathspec. This helps simplify ambiguation
handling. The other two ("git checkout" and "git restore") of
course do accept pathspec as before.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is ancient. Nowadays reflog is enabled by default and
automatically created for new branches. Keep it in git-checkout only.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--discard-changes is a better name than --force for this option since
it's what really happens. --force is turned to an alias for
--discard-changes. But it's meant to be an alias for potentially more
force options in the future.
Side note. It's not obvious from the patch but --discard-changes also
affects submodules if --recurse-submodules is used. The knob to force
updating submodules is hidden behind unpack-trees.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shortcut of these options do not make much sense when used with
switch. And their descriptions are also tied to checkout. Move -b/-B
to cmd_checkout() and new -c/-C with the same functionality in
cmd_switch_branch()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparation step for introducing new commands that do parts
of what checkout does. There will be two new commands, one is about
switching branches, detaching HEAD... one about checking out
paths. These share the a subset of command line options. The rest of
command line options are separate.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These local variables are referenced by struct option[]. This struct
will soon be broken down, moved away and we can't rely on local
variables anymore. Move these two to struct checkout_opts in
preparation for that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"opts" will soon be moved out of cmd_checkout(). To keep changes in
that patch smaller, convert "opts" to a pointer and keep the real
thing behind "real_opts".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for the new command restore, which also
needs to parse opts->source_tree but does not need all the
disambiguation logic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The include list becomes very long and frankly a bit unorganized. With
the exception of builtin.h, cache.h or git-compat-util.h which have to
come first, keep the rest sorted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.
I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.
PS. Originally I wanted to print more details like
warning: cancelling an in-progress merge from <SHA-1>
which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.
[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git index-pack' is run by 'git clone', its check_objects()
function usually doesn't take long enough to be a concern, but I just
run into a situation where it took about a minute or so: I
inadvertently put some memory pressure on my tiny laptop while cloning
linux.git, and then there was quite a long silence between the
"Resolving deltas" and "Checking connectivity" progress bars.
Show a progress bar during the loop of check_objects() to let the user
know that something is still going on.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't redundantly run "git reflog expire --all" when gc.reflogExpire
and gc.reflogExpireUnreachable are set to "never", and die immediately
if those configuration valuer are bad.
As an earlier "assert lack of early exit" change to the tests for "git
reflog expire" shows, an early check of gc.reflogExpire{Unreachable,}
isn't wanted in general for "git reflog expire", but it makes sense
for "gc" because:
1) Similarly to 8ab5aa4bd8 ("parseopt: handle malformed --expire
arguments more nicely", 2018-04-21) we'll now die early if the
config variables are set to invalid values.
We run "pack-refs" before "reflog expire", which can take a while,
only to then die on an invalid gc.reflogExpire{Unreachable,}
configuration.
2) Not invoking the command at all means it won't show up in trace
output, which makes what's going on more obvious when the two are
set to "never".
3) As a later change documents we lock the refs when looping over the
refs to expire, even in cases where we end up doing nothing due to
this config.
For the reasons noted in the earlier "assert lack of early exit"
change I don't think it's worth it to bend over backwards in "git
reflog expire" itself to carefully detect if we'll really do
nothing given the combination of all its possible options and skip
that locking, but that's easy to detect here in "gc" where we'll
only run "reflog expire" in a relatively simple mode.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "commit-graph verify" to error on open() failures other than
ENOENT. As noted in the third paragraph of 283e68c72f ("commit-graph:
add 'verify' subcommand", 2018-06-27) and the test it added it's
intentional that "commit-graph verify" doesn't error out when the file
doesn't exist.
But let's not be overly promiscuous in what we accept. If we can't
read the file for other reasons, e.g. permission errors, bad file
descriptor etc. we'd like to report an error to the user.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier change implemented load_commit_graph_one_fd_st() in a way
that was bug-compatible with earlier code in terms of the "graph file
%s is too small" error message printing out the path to the
commit-graph (".git/objects/info/commit-graph").
But change that, because:
* A function that takes an already-open file descriptor also needing
the filename isn't very intuitive.
* The vast majority of errors we might emit when loading the graph
come from parse_commit_graph(), which doesn't report the
filename. Let's not do that either in this case for consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the commit-graph loading code work as a library that returns an
error code instead of calling exit(1) when the commit-graph is
corrupt. This means that e.g. "status" will now report commit-graph
corruption as an "error: [...]" at the top of its output, but then
proceed to work normally.
This required splitting up the load_commit_graph_one() function so
that the code that deals with open()-ing and stat()-ing the graph can
now be called independently as open_commit_graph().
This is needed because "commit-graph verify" where the graph doesn't
exist isn't an error. See the third paragraph in
283e68c72f ("commit-graph: add 'verify' subcommand",
2018-06-27). There's a bug in that logic where we conflate the
intended ENOENT with other errno values (e.g. EACCES), but this change
doesn't address that. That'll be addressed in a follow-up change.
I'm then splitting most of the logic out of load_commit_graph_one()
into load_commit_graph_one_fd_st(), which allows for providing an
existing file descriptor and stat information to the loading
code. This isn't strictly needed, but it would be redundant and
confusing to open() and stat() the file twice for some of the
codepaths, this allows for calling open_commit_graph() followed by
load_commit_graph_one_fd_st(). The "graph_file" still needs to be
passed to that function for the the "graph file %s is too small" error
message.
This leaves load_commit_graph_one() unused by everything except the
internal prepare_commit_graph_one() function, so let's mark it as
"static". If someone needs it in the future we can remove the "static"
attribute. I could also rewrite its sole remaining
user ("prepare_commit_graph_one()") to use
load_commit_graph_one_fd_st() instead, but let's leave it at this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using get_oid_hex and adding constants to the result, use
parse_oid_hex to make this code independent of the hash size.
Additionally, correct a typo that would cause us to print one too few
characters on error, since we will already have incremented the pointer
to point to the beginning of the object ID before we get to printing the
error message.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make this code independent of the hash size, verify that the length
of the comment is equal to that of any supported hash algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parse pax comment records properly and get rid of magic numbers for
acceptable comment length. This simplifies a later change to handle
longer hashes.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using get_oid_hex and GIT_SHA1_HEXSZ, use parse_oid_hex to
avoid the need for a constant and simplify the code.
Additionally, fix some comments to refer to object IDs instead of SHA-1
and update a constant used to provide an allocation hint.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using GIT_SHA1_HEXSZ, switch to using the_hash_algo and
parse_oid_hex to parse the lines involved in rebasing notes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the_hash_algo when parsing instead of GIT_SHA1_HEXSZ so that this
function works with any size hash. Rename the variable forty to
counter, as this is a better name and is independent of the hash size.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This member is used to represent the pack checksum of the pack in
question. Expand this member to be GIT_MAX_RAWSZ bytes in length so it
works with longer hashes and rename it to be "hash" instead of "sha1".
This transformation was made with a change to the definition and the
following semantic patch:
@@
struct packed_git *E1;
@@
- E1->sha1
+ E1->hash
@@
struct packed_git E1;
@@
- E1.sha1
+ E1.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of storing unsigned char pointers in the hash tables, switch to
storing instances of struct object_id. Update several internal functions
and one external function to take pointers to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_opt_parse() is a heavy hammer to just set diff filter. But it's
the only way because of the diff_status_letters[] mapping. Add a new
API to set diff filter and use it in git-am. diff_opt_parse()'s only
remaining call site in revision.c will be gone soon and having it here
just because of git-am does not make sense.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, move exit() back to the caller. It's easier to see the
flow that way than burying it in diff-no-index.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diff's internal option parsing is now done with 'struct option', which
makes it possible to combine all diff options to range-diff and parse
everything all at once. Parsing code becomes simpler, and we get a
looong 'git range-diff -h'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --merge is specified, we may need to do a real merge (instead of
three-way tree unpacking), the steps are best seen in git-checkout.sh
version before it's removed:
# Match the index to the working tree, and do a three-way.
git diff-files --name-only | git update-index --remove --stdin &&
work=`git write-tree` &&
git read-tree $v --reset -u $new || exit
git merge-recursive $old -- $new $work
# Do not register the cleanly merged paths in the index yet.
# this is not a real merge before committing, but just carrying
# the working tree changes along.
unmerged=`git ls-files -u`
git read-tree $v --reset $new
case "$unmerged" in
'') ;;
*)
(
z40=0000000000000000000000000000000000000000
echo "$unmerged" |
sed -e 's/^[0-7]* [0-9a-f]* /'"0 $z40 /"
echo "$unmerged"
) | git update-index --index-info
;;
esac
Notice the last 'read-tree --reset' step. We restore worktree back to
'new' tree after worktree's messed up by merge-recursive. If there are
staged changes before this whole command sequence is executed, they
are lost because they are unlikely part of the 'new' tree to be
restored.
There is no easy way to fix this. Elijah may have something up his
sleeves [1], but until then, check if there are staged changes and
refuse to run and lose them. The user would need to do "git reset" to
continue in this case.
A note about the test update. 'checkout -m' in that test will fail
because a deletion is staged. This 'checkout -m' was previously needed
to verify quietness behavior of unpack-trees. But a different check
has been put in place in the last patch. We can safely drop
'checkout -m' now.
[1] CABPp-BFoL_U=bzON4SEMaQSKU2TKwnOgNqjt5MUaOejTKGUJxw@mail.gmail.com
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-tree is basically the front end of unpack-trees code and shoud
expose all of its functionality (unless it's designed for internal
use). This "opts.quiet" (formerly "opts.gently") was added for
builtin/checkout.c but there is no reason why other read-tree users
won't find this useful.
The test that is updated to run 'read-tree --quiet' was added because
unpack-trees was accidentally not being quiet [1] in 6a143aa2b2
(checkout -m: attempt merge when deletion of path was staged -
2014-08-12). Because checkout is the only "opts.quiet" user, there was
no other way to test quiet behavior. But we can now test it directly.
6a143aa2b2 was manually reverted to verify that read-tree --quiet
works correctly (i.e. test_must_be_empty fails).
[1] the commit message there say "errors out instead of performing a
merge" but I'm pretty sure the "performing a merge" happens anyway
even before that commit. That line should say "errors out
_in addition to_ performing a merge"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gently flag was added in 17e4642667 (Add flag to make unpack_trees()
not print errors. - 2008-02-07) to suppress error messages. The name
"gently" does not quite express that. Granted, being quiet is gentle but
it could mean not performing some other actions. Rename the flag to
"quiet" to be more on point.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I did something stupid today and got
$ git commit -a --fixup= @^
fatal: Paths with -a does not make sense.
which didn't make any sense (at least for the first few seconds).
Include the first path(spec) in the error message to help spot the
problem quicker. Now it shows
fatal: paths '@^ ...' with -a does not make sense
which should ring some bell because @^ should clearly not be considered
a path.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Log multi-pack-index command mode.
Log number of objects and packfiles in the midx.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have staged changes in path A and perform 'checkout
--merge' (which could result in conflicts in a totally unrelated path
B), changes in A will be gone. Which is unexpected. We are supposed
to keep all changes, or kick and scream otherwise.
This is the result of how --merge is implemented, from the very first
day in 1be0659efc (checkout: merge local modifications while switching
branches., 2006-01-12):
1. a merge is done, unmerged entries are collected
2. a hard switch to a new branch is done, then unmerged entries added
back
There is no trivial fix for this. Going with 3-way merge one file at a
time loses rename detection. Going with 3-way merge by trees requires
teaching the algorithm to pick up staged changes. And even if we detect
staged changes with --merge and abort for safety, an option to continue
--merge is very weird. Such an option would keep worktree changes, but
drop staged changes.
Because the problem has been with us since the introduction of --merge
and everybody has been pretty happy (except Phillip, who found this
problem), I'll just take a note here to acknowledge it and wait for
merge wizards to come in and work their magic. There may be a way
forward [1].
[1] CABPp-BFoL_U=bzON4SEMaQSKU2TKwnOgNqjt5MUaOejTKGUJxw@mail.gmail.com
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--sort" parameter of for-each-ref, etc, does not handle negation,
and instead returns an error to the parse-options code. But neither
piece of code prints anything for the user, which may leave them
confused:
$ git for-each-ref --no-sort
$ echo $?
129
As the comment in the callback function notes, this probably should
clear the list, which would make it consistent with other list-like
options (i.e., anything that uses OPT_STRING_LIST currently).
Unfortunately that's a bit tricky due to the way the ref-filter code
works. But in the meantime, let's at least make the error a little less
confusing:
- switch to using PARSE_OPT_NONEG in the option definition, which will
cause the options code to produce a useful message
- since this was cut-and-pasted to four different spots, let's define
a single OPT_REF_SORT() macro that we can use everywhere
- the callback can use BUG_ON_OPT_NEG() to make sure the correct flags
are used (incidentally, this also satisfies -Wunused-parameters,
since we're now looking at "unset")
- expand the comment into a NEEDSWORK to make it clear that the
direction is right, but the details need to be worked out
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the scripted 'git stash show' when no arguments are passed, we just
pass '--stat' to 'git diff'. When any argument is passed to 'stash
show', we no longer pass '--stat' to 'git diff', and pass whatever
flags are passed directly through to 'git diff'.
By default 'git diff' shows the patch output. So when a user uses
'git stash show --patience', they would be shown the diff as expected,
using the patience algorithm. '--patience' in this case only changes
the diff algorithm, but does not cause 'git diff' to show the diff by
itself. The diff is shown because that's the default behaviour of
'git diff'.
In the C version of 'git stash show', we try to emulate that behaviour
using the internal diff API. However we forgot to set up the default
output format, in case it wasn't set by any of the flags that were
passed through. So 'git stash show --patience' in the builtin version
of stash would be completely silent, while it would show the diff in
the scripted version.
The same thing would happen for other flags that only affect the way a
patch is displayed, rather than switching to a different output format
than the default one.
Fix this by setting up the default output format for 'git diff'.
Reported-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need the caller of fetch_pack() to pass in "dest", which is the
remote URL. Since ba227857d2 (Reduce the number of connects when
fetching, 2008-02-04), the caller is responsible for calling
git_connect() itself, and our "dest" parameter is unused.
That commit also started passing us the resulting "conn" child_process
from git_connect(). But likewise, we do not need do anything with it.
The descriptors in "fd" are enough for us, and the caller is responsible
for cleaning up "conn".
We can just drop both parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hasn't been used since 17ddc66e70 (convert report_path_error to
take struct pathspec, 2013-07-14), as the names in the struct will have
already been prefixed when they were parsed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix is always a NUL-terminated string, and we just end up passing
it along to parse_pathspec() anyway (which does not even take a length).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pass the length of the found "tagger" line to show_tagger(), but it
does not use it; instead, it passes the string to pp_user_info(), which
reads until newline or NUL. This is OK for our purposes because we
always read the object contents into a buffer with an extra NUL (and
indeed, our sole caller already relies on this by using starts_with).
Let's drop the ignored parameter. And while we're touching the caller,
let's use skip_prefix() to avoid a magic number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The early output code passes around a rev_info struct but doesn't need
it. The setup step only turns on global signal handlers, and the
"estimate" step is done completely from the rev->commits list that is
passed in separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line parser of "git commit-tree" has been rewritten to
use the parse-options API.
* br/commit-tree-parseopt:
commit-tree: utilize parse-options api
The setup code has been cleaned up to avoid leaks around the
repository_format structure.
* ma/clear-repository-format:
setup: fix memory leaks with `struct repository_format`
setup: free old value before setting `work_tree`
A recent update broke "is this object available to us?" check for
well-known objects like an empty tree (which should yield "yes",
even when there is no on-disk object for an empty tree), which has
been corrected.
* jk/virtual-objects-do-exist:
rev-list: allow cached objects in existence check
On platforms where "git fetch" is killed with SIGPIPE (e.g. OSX),
the upload-pack that runs on the other end that hangs up after
detecting an error could cause "git fetch" to die with a signal,
which led to a flakey test. "git fetch" now ignores SIGPIPE during
the network portion of its operation (this is not a problem as we
check the return status from our write(2)s).
* jk/no-sigpipe-during-network-transport:
fetch: ignore SIGPIPE during network operation
fetch: avoid calling write_or_die()
"git fsck --connectivity-only" omits computation necessary to sift
the objects that are not reachable from any of the refs into
unreachable and dangling. This is now enabled when dangling
objects are requested (which is done by default, but can be
overridden with the "--no-dangling" option).
* jk/fsck-doc:
fsck: always compute USED flags for unreachable objects
doc/fsck: clarify --connectivity-only behavior
"git rebase" that was reimplemented in C did not set ORIG_HEAD
correctly, which has been corrected.
* js/rebase-orig-head-fix:
built-in rebase: set ORIG_HEAD just once, before the rebase
built-in rebase: demonstrate that ORIG_HEAD is not set correctly
built-in rebase: use the correct reflog when switching branches
built-in rebase: no need to check out `onto` twice
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change an idiom we're using to ensure that gc_before_repack() only
does work once (see 62aad1849f ("gc --auto: do not lock refs in the
background", 2014-05-25)) to be more obvious.
Nothing except this function cares about the "pack_refs" and
"prune_reflogs" variables, so let's not leave the reader wondering if
they're being zero'd out for later use somewhere else.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's been a lot of changing of the hardcoded "40" values to
the_hash_algo->hexsz, but we've so far missed this one where we
hardcoded 38 for the loose object file length.
This is because a SHA-1 like abcde[...] gets turned into
objects/ab/cde[...]. There's no reason to suppose the same won't be
the case for SHA-256, and reading between the lines in
hash-function-transition.txt the format is planned to be the same.
In the future we may want to further modify this code for the hash
function transition. There's a potential pathological case here where
we'll only consider the loose objects for the currently active hash,
but objects for that hash will share a directory storage with the
other hash.
Thus we could theoretically have e.g. 1k SHA-1 loose objects, and 1
million SHA-256 objects. Then not notice that we need to pack them
because we're currently using SHA-1, even though our FS may be
straining under the stress of such humongous directories.
So assuming that "gc" eventually learns to pack up both SHA-1 and
SHA-256 objects regardless of what the current the_hash_algo is,
perhaps this check should be changed to consider all files in
objects/17/ matching [0-9a-f] 38 or 62 characters in length (i.e. both
SHA-1 and SHA-256).
But none of that is something we need to worry about now, and
supporting both 38 and 62 characters depending on "the_hash_algo"
removes another case of SHA-1 hardcoding.
As noted in [1] I'm making no effort to somehow remove the hardcoding
for "2" as in "use the first two hexdigits for the directory
name". There's no indication that that'll ever change, and somehow
generalizing it here would be a drop in the ocean, so there's no point
in doing that. It also couldn't be done without coming up with some
generalized version of the magical "objects/17" directory. See [2] for
a discussion of that directory.
1. https://public-inbox.org/git/874l84ber7.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/87k1mta9x5.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enabling pack.writebitmaphashcache should always be a performance win.
It costs only 4 bytes per object on disk, and the timings in ae4f07fbcc
(pack-bitmap: implement optional name_hash cache, 2013-12-21) show it
improving fetch and partial-bitmap clone times by 40-50%.
The only reason we didn't enable it by default at the time is that early
versions of JGit's bitmap reader complained about the presence of
optional header bits it didn't understand. But that was changed in
JGit's d2fa3987a (Use bitcheck to check for presence of OPT_FULL option,
2013-10-30), which made it into JGit v3.5.0 in late 2014.
So let's turn this option on by default. It's backwards-compatible with
all versions of Git, and if you are also using JGit on the same
repository, you'd only run into problems using a version that's almost 5
years old.
We'll drop the manual setting from all of our test scripts, including
perf tests. This isn't strictly necessary, but it has two advantages:
1. If the hash-cache ever stops being enabled by default, our perf
regression tests will notice.
2. We can use the modified perf tests to show off the behavior of an
otherwise unconfigured repo, as shown below.
These are the results of a few of a perf tests against linux.git that
showed interesting results. You can see the expected speedup in 5310.4,
which was noted in ae4f07fbcc. Curiously, 5310.8 did not improve (and
actually got slower), despite seeing the opposite in ae4f07fbcc.
I don't have an explanation for that.
The tests from p5311 did not exist back then, but do show improvements
(a smaller pack due to better deltas, which we found in less time).
Test HEAD^ HEAD
-------------------------------------------------------------------------------------
5310.4: simulated fetch 7.39(22.70+0.25) 5.64(11.43+0.22) -23.7%
5310.8: clone (partial bitmap) 18.45(24.83+1.19) 19.94(28.40+1.36) +8.1%
5311.31: server (128 days) 0.41(1.13+0.05) 0.34(0.72+0.02) -17.1%
5311.32: size (128 days) 7.4M 7.0M -4.8%
5311.33: client (128 days) 1.33(1.49+0.06) 1.29(1.37+0.12) -3.0%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical use case for bare repos is for serving clones and
fetches to clients. Enable bitmaps by default on bare repos to
make it easier for admins to host git repos in a performant way.
Signed-off-by: Eric Wong <e@80x24.org>
Helped-by: Jeff King <peff@peff.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As far as this developer can tell, the conversion from a Perl script to
a built-in caused the regression in the difftool that it no longer runs
outside of a Git worktree (with `--no-index`, of course).
It is a bit embarrassing that it took over two years after retiring the
Perl version to discover this regression, but at least we now know, and
can do something, about it.
This fixes https://github.com/git-for-windows/git/issues/2123
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will always spawn something from `git difftool`, so we will always
have to set `GIT_DIR` and `GIT_WORK_TREE`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking gc_auto_threshold in too_many_loose_objects() was added in
17815501a8 ("git-gc --auto: run "repack -A -d -l" as necessary.",
2007-09-17) when need_to_gc() itself was also reliant on
gc_auto_pack_limit before its early return:
gc_auto_threshold <= 0 && gc_auto_pack_limit <= 0
When that check was simplified to just checking "gc_auto_threshold <=
0" in b14d255ba8 ("builtin-gc.c: allow disabling all auto-gc'ing by
assigning 0 to gc.auto", 2008-03-19) this unreachable code should have
been removed. We only call too_many_loose_objects() from within
need_to_gc() itself, which will return if this condition holds, and in
cmd_gc() which will return before ever getting to "auto_gc &&
too_many_loose_objects()" if "auto_gc && !need_to_gc()" is true
earlier in the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a brown paper bag. When adding the tests, we actually failed
to verify that the config variable is heeded in git-init at all. And
when changing the original patch that marked the .git/ directory as
hidden after reading the config, it was lost on this developer that
the new code would use the hide_dotfiles variable before the config
was read.
The fix is obvious: read the (limited, pre-init) config *before*
creating the .git/ directory.
Please note that we cannot remove the identical-looking `git_config()`
call from `create_default_files()`: we create the `.git/` directory
between those calls. If we removed it, and if the parent directory is
in a Git worktree, and if that worktree's `.git/config` contained any
`init.templatedir` setting, we would all of a sudden pick that up.
This fixes https://github.com/git-for-windows/git/issues/789
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have something much better now: --rebase-merges (which is a
complete re-design --preserve-merges, with a lot of issues fixed such as
the inability to reorder commits with --preserve-merges).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git runs a stat loop to find a worktree name that's available and
then does mkdir on the found name. Turn it to mkdir loop to avoid
another invocation of worktree add finding the same free name and
creating the directory first.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Passing the pathspec by value is potentially confusing, as the copy is
only a shallow copy, so save the overhead of the copy, and pass the
pathspec struct as a pointer.
In addition use copy_pathspec to copy the pathspec into
rev.prune_data, so the copy is a proper deep copy, and owned by the
revision API, as that's what the API expects.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the unused prefix parameter in do_drop_stash.
We also have an unused "prefix" parameter in the 'create_stash'
function, however we leave that in place for symmetry with the other
top-level functions.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing a list of pathspecs to, say, `git add`, we need to be
careful to use the original form, not the parsed form of the pathspecs.
This makes a difference e.g. when calling
git stash -- ':(glob)**/*.txt'
where the original form includes the `:(glob)` prefix while the parsed
form does not.
However, in the built-in `git stash`, we passed the parsed (i.e.
incorrect) form, and `git add` would fail with the error message:
fatal: pathspec '**/*.txt' did not match any files
at the stage where `git stash` drops the changes from the worktree, even
if `refs/stash` has been actually updated successfully.
This fixes https://github.com/git-for-windows/git/issues/2037
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than parse options manually, which is both difficult to
read and error prone, parse options supplied to commit-tree
using the parse-options api.
It was discovered that the --no-gpg-sign option was documented
but not implemented in commit 70ddbd7767 (commit-tree: add missing
--gpg-sign flag, 2019-01-19), and the existing implementation
would attempt to translate the option as a tree oid. It was also
suggested earlier in commit 55ca3f99ae (commit-tree: add and document
--no-gpg-sign, 2013-12-13) that commit-tree should be migrated to
utilize the parse-options api, which could help prevent mistakes
like this in the future. Hence this change.
Also update the documentation to better describe that mixing
`-m` and `-F` options will correctly compose commit log messages in the
order in which the options are given.
In the process, mark various strings for translation.
Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" may still want to access Git goodies like
--ext-diff and --textconv, but so far these have been ignored,
which has been corrected.
* jk/diff-no-index-initialize:
diff: reuse diff setup for --no-index case
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
"git prune" has been taught to take advantage of reachability
bitmap when able.
* jk/prune-optim:
t5304: rename "sha1" variables to "oid"
prune: check SEEN flag for reachability
prune: use bitmaps for reachability traversal
prune: lazily perform reachability traversal
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
"git prune-packed" did not notice and complain against excess
arguments given from the command line, which now it does.
* rj/prune-packed-excess-args:
prune-packed: check for too many arguments
Output from "diff --cc" did not show the original paths when the
merge involved renames. A new option adds the paths in the
original trees to the output.
* en/combined-all-paths:
log,diff-tree: add --combined-all-paths option
Update the implementation of pack-redundant for performance in a
repository with many packfiles.
* sc/pack-redundant:
pack-redundant: consistent sort method
pack-redundant: rename pack_list.all_objects
pack-redundant: new algorithm to find min packs
pack-redundant: delete redundant code
pack-redundant: delay creation of unique_objects
t5323: test cases for git-pack-redundant
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.
* tg/checkout-no-overlay:
revert "checkout: introduce checkout.overlayMode config"
checkout: introduce checkout.overlayMode config
checkout: introduce --{,no-}overlay option
checkout: factor out mark_cache_entry_for_checkout function
checkout: clarify comment
read-cache: add invalidate parameter to remove_marked_cache_entries
entry: support CE_WT_REMOVE flag in checkout_entry
entry: factor out unlink_entry function
move worktree tests to t24*
Add a GIT_TEST_STASH_USE_BUILTIN=false test mode which is equivalent
to running with stash.useBuiltin=false. This is needed to spot that
we're not introducing any regressions in the legacy stash version
while we're carrying both it and the new built-in version.
This imitates the equivalent treatment for the built-in rebase in
62c23938fa (tests: add a special setup where rebase.useBuiltin is off,
2018-11-14).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We recently converted the `git stash` command from Unix shell scripts
to builtins.
Let's end users a way out when they discover a bug in the
builtin command: `stash.useBuiltin`.
As the file name `git-stash` is already in use, let's rename the
scripted backend to `git-legacy-stash`.
To make the test suite pass with `stash.useBuiltin=false`, this commit
also backports rudimentary support for `-q` (but only *just* enough
to appease the test suite), and adds a super-ugly hack to force exit
code 129 for `git stash -h`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old shell script `git-stash.sh` was removed and replaced
entirely by `builtin/stash.c`. In order to do that, `create` and
`push` were adapted to work without `stash.sh`. For example, before
this commit, `git stash create` called `git stash--helper create
--message "$*"`. If it called `git stash--helper create "$@"`, then
some of these changes wouldn't have been necessary.
This commit also removes the word `helper` since now stash is
called directly and not by a shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid spawning write-tree child processes by replacing the calls with
in-core API calls.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commits introduces a optimization by avoiding calling the
same functions again. For example, `git stash push -u`
would call at some points the following functions:
* `check_changes()` (inside `do_push_stash()`)
* `do_create_stash()`, which calls: `check_changes()` and
`get_untracked_files()`
Note that `check_changes()` also calls `get_untracked_files()`.
So, `check_changes()` is called 2 times and `get_untracked_files()`
3 times.
The old function `check_changes()` now consists of two functions:
`get_untracked_files()` and `check_changes_tracked_files()`.
These are the call chains for `push` and `create`:
* `push_stash()` -> `do_push_stash()` -> `do_create_stash()`
* `create_stash()` -> `do_create_stash()`
To prevent calling the same functions over and over again,
`check_changes()` inside `do_create_stash()` is now placed
in the caller functions (`create_stash()` and `do_push_stash()`).
This way `check_changes()` and `get_untracked files()` are called
only one time.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash save to the helper and delete functions which are no
longer needed (`show_help()`, `save_stash()`, `push_stash()`,
`create_stash()`, `clear_stash()`, `untracked_files()` and
`no_changes()`).
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a change in behaviour with this commit. When there was
no initial commit, the shell version of stash would still display
a message. This commit makes `push` to not display any message if
`--quiet` or `-q` is specified. Add tests for `--quiet`.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash push to the helper.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash create to the helper.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Helped-by: Matthew Kraai <mkraai@its.jnj.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash store to the helper and delete the store_stash function
from the shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash show to the helper and delete the show_stash, have_stash,
assert_stash_like, is_stash_like and parse_flags_and_rev functions
from the shell script now that they are no longer needed.
In shell version, although `git stash show` accepts `--index` and
`--quiet` options, it ignores them. In C, both options are passed
further to `git diff`.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash list to the helper and delete the list_stash function
from the shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash pop to the helper and delete the pop_stash, drop_stash,
assert_stash_ref functions from the shell script now that they
are no longer needed.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add stash branch to the helper and delete the apply_to_branch
function from the shell script.
Checkout does not currently provide a function for checking out
a branch as cmd_checkout does a large amount of sanity checks
first that we require here.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the drop and clear commands to the builtin helper. These two
are each simple, but are being added together as they are quite
related.
We have to unfortunately keep the drop and clear functions in the
shell script as functions are called with parameters internally
that are not valid when the commands are called externally. Once
pop is converted they can both be removed.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a builtin helper for performing stash commands. Converting
all at once proved hard to review, so starting with just apply
lets conversion get started without the other commands being
finished.
The helper is being implemented as a drop in replacement for
stash so that when it is complete it can simply be renamed and
the shell script deleted.
Delete the contents of the apply_stash shell function and replace
it with a call to stash--helper apply until pop is also
converted.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As transform_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
edit_todo_list() is changed to work on a todo_list, and to handle the
initial edition of the todo list (ie. making a backup of the todo
list).
It does not check for dropped commits yet, as todo_list_check() does not
take the commits that have already been processed by the rebase (ie. the
todo list is edited in the middle of a rebase session).
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As rearrange_squash_in_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way, and the error
handling is slightly improved.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As sequencer_add_exec_commands() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
complete_action() used functions that read the todo-list file, made some
changes to it, and wrote it back to the disk.
The previous commits were dedicated to separate the part that deals with
the file from the actual logic of these functions. Now that this is
done, we can call directly the "logic" functions to avoid useless file
access.
The parsing of the list has to be done by the caller. If the buffer of
the todo list provided by the caller is empty, a `noop' command is
directly added to the todo list, without touching the buffer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sequencer_make_script() write its script to a strbuf (ie. the
buffer of a todo_list) instead of a FILE. This reduce the amount of
read/write made by rebase interactive.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors rearrange_squash() to work on a todo_list to avoid
redundant reads and writes. The function is renamed
todo_list_rearrange_squash().
The old version created a new buffer, which was directly written to the
disk. This new version creates a new item list by just copying items
from the old item list, without creating a new buffer. This eliminates
the need to reparse the todo list, but this also means its buffer cannot
be directly written to the disk.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, rearrange_squash_in_todo_file().
complete_action() still uses rearrange_squash_in_todo_file() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors sequencer_add_exec_commands() to work on a todo_list to
avoid redundant reads and writes to the disk.
Instead of inserting the `exec' commands between the other commands and
re-parsing the buffer at the end, they are appended to the buffer once,
and a new list of items is created. Items from the old list are copied
across and new `exec' items are appended when necessary. This
eliminates the need to reparse the buffer, but this also means we have
to use todo_list_write_to_disk() to write the file.
todo_list_add_exec_commands() and sequencer_add_exec_commands() are
modified to take a string list instead of a string -- one item for each
command. This makes it easier to insert a new command to the todo list
for each command to execute.
sequencer_add_exec_commands() still reads the todo list from the disk,
as it is needed by rebase -p.
complete_action() still uses sequencer_add_exec_commands() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --connectivity-only option avoids opening every object, and instead
just marks reachable objects with a flag and compares this to the set
of all objects. This strategy is discussed in more detail in 3e3f8bd608
(fsck: prepare dummy objects for --connectivity-check, 2017-01-17).
This means that we report _every_ unreachable object as dangling.
Whereas in a full fsck, we'd have actually opened and parsed each of
those unreachable objects, marking their child objects with the USED
flag, to mean "this was mentioned by another object". And thus we can
report only the tip of an unreachable segment of the object graph as
dangling.
You can see this difference with a trivial example:
tree=$(git hash-object -t tree -w /dev/null)
one=$(echo one | git commit-tree $tree)
two=$(echo two | git commit-tree -p $one $tree)
Running `git fsck` will report only $two as dangling, but with
--connectivity-only, both commits (and the tree) are reported. Likewise,
using --lost-found would write all three objects.
We can make --connectivity-only work like the normal case by taking a
separate pass over the unreachable objects, parsing them and marking
objects they refer to as USED. That still avoids parsing any blobs,
though we do pay the cost to access any unreachable commits and trees
(which may or may not be noticeable, depending on how many you have).
If neither --dangling nor --lost-found is in effect, then we can skip
this step entirely, just like we do now. That makes "--connectivity-only
--no-dangling" just as fast as the current "--connectivity-only". I.e.,
we do the correct thing always, but you can still tweak the options to
make it faster if you don't care about dangling objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression in 7c0fe330d5 (rev-list: handle missing tree
objects properly, 2018-10-05) where rev-list will now complain about the
empty tree when it doesn't physically exist on disk.
Before that commit, we relied on the traversal code in list-objects.c to
walk through the trees. Since it uses parse_tree(), we'd do a normal
object lookup that includes looking in the set of "cached" objects
(which is where our magic internal empty-tree kicks in).
After that commit, we instead tell list-objects.c not to die on any
missing trees, and we check them ourselves using has_object_file(). But
that function uses OBJECT_INFO_SKIP_CACHED, which means we won't use our
internal empty tree.
This normally wouldn't come up. For most operations, Git will try to
write out the empty tree object as it would any other object. And
pack-objects in a push or fetch will send the empty tree (even if it's
virtual on the sending side). However, there are cases where this can
matter. One I found in the wild:
1. The root tree of a commit became empty by deleting all files,
without using an index. In this case it was done using libgit2's
tree builder API, but as the included test shows, it can easily be
done with regular git using hash-object.
The resulting repo works OK, as we'd avoid walking over our own
reachable commits for a connectivity check.
2. Cloning with --reference pointing to the repository from (1) can
trigger the problem, because we tell the other side we already have
that commit (and hence the empty tree), but then walk over it
during the connectivity check (where we complain about it missing).
Arguably the workflow in step (1) should be more careful about writing
the empty tree object if we're referencing it. But this workflow did
work prior to 7c0fe330d5, so let's restore it.
This patch makes the minimal fix, which is to swap out a direct call to
oid_object_info_extended(), minus the SKIP_CACHED flag, instead of
calling has_object_file(). This is all that has_object_file() is doing
under the hood. And there's little danger of unrelated fallout from
other unexpected "cached" objects, since there's only one call site that
ends such a cached object, and it's in git-blame.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default SIGPIPE behavior can be useful for a command that generates
a lot of output: if the receiver of our output goes away, we'll be
notified asynchronously to stop generating it (typically by killing the
program).
But for a command like fetch, which is primarily concerned with
receiving data and writing it to disk, an unexpected SIGPIPE can be
awkward. We're already checking the return value of all of our write()
calls, and dying due to the signal takes away our chance to gracefully
handle the error.
On Linux, we wouldn't generally see SIGPIPE at all during fetch. If the
other side of the network connection hangs up, we'll see ECONNRESET. But
on OS X, we get a SIGPIPE, and the process is killed. This causes t5570
to racily fail, as we sometimes die by signal (instead of the expected
die() call) when the server side hangs up.
Let's ignore SIGPIPE during the network portion of the fetch, which will
cause our write() to return EPIPE, giving us consistent behavior across
platforms.
This fixes the test flakiness, but note that it stops short of fixing
the larger problem. The server side hit a fatal error, sent us an "ERR"
packet, and then hung up. We notice the failure because we're trying to
write to a closed socket. But by dying immediately, we never actually
read the ERR packet and report its content to the user. This is a (racy)
problem on all platforms. So this patch lays the groundwork from which
that problem might be fixed consistently, but it doesn't actually fix
it.
Note the placement of the SIGPIPE handling. The absolute minimal change
would be to ignore SIGPIPE only when we're writing. But twiddling the
signal handler for each write call is inefficient and maintenance
burden. On the opposite end of the spectrum, we could simply declare
that fetch does not need SIGPIPE handling, since it doesn't generate a
lot of output, and we could just ignore it at the start of cmd_fetch().
This patch takes a middle ground. It ignores SIGPIPE during the network
operation (which is admittedly most of the program, since the actual
network operations are all done under the hood by the transport code).
So it's still pretty coarse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Technically, the scripted version set ORIG_HEAD only in two spots (which
really could have been one, because it called `git checkout $onto^0` to
start the rebase and also if it could take a shortcut, and in both cases
it called `git update-ref $orig_head`).
Practically, it *implicitly* reset ORIG_HEAD whenever `git reset --hard`
was called.
However, what we really want is that it is set exactly once, at the
beginning of the rebase.
So let's do that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By mistake, we used the reflog intended for ORIG_HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case that the rebase boils down to a fast-forward, the built-in
rebase reset the working tree twice: once to start the rebase at `onto`,
then realizing that the original (pre-rebase) HEAD was an ancestor and
we basically already fast-forwarded to the post-rebase HEAD,
`reset_head()` was called to update the original ref and to point HEAD
back to it.
That second `reset_head()` call does not need to touch the working tree,
though, as it does not change the actual tip commit (and therefore the
working tree should stay unchanged anyway): only the ref needs to be
updated (because the rebase detached the HEAD, and we want to go back to
the branch on which the rebase was started).
But that second `reset_head()` was called without the flag to leave the
working tree alone (the reason: when that call was introduced, that flag
was not yet even thought of). Let's avoid that unnecessary work by
passing that flag.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we set up a `struct repository_format`, it owns various pieces of
allocated memory. We then either use those members, because we decide we
want to use the "candidate" repository format, or we discard the
candidate / scratch space. In the first case, we transfer ownership of
the memory to a few global variables. In the latter case, we just
silently drop the struct and end up leaking memory.
Introduce an initialization macro `REPOSITORY_FORMAT_INIT` and a
function `clear_repository_format()`, to be used on each side of
`read_repository_format()`. To have a clear and simple memory ownership,
let all users of `struct repository_format` duplicate the strings that
they take from it, rather than stealing the pointers.
Call `clear_...()` at the start of `read_...()` instead of just zeroing
the struct, since we sometimes enter the function multiple times. Thus,
it is important to initialize the struct before calling `read_...()`, so
document that. It's also important because we might not even call
`read_...()` before we call `clear_...()`, see, e.g., builtin/init-db.c.
Teach `read_...()` to clear the struct on error, so that it is reset to
a safe state, and document this. (In `setup_git_directory_gently()`, we
look at `repo_fmt.hash_algo` even if `repo_fmt.version` is -1, which we
weren't actually supposed to do per the API. After this commit, that's
ok.)
We inherit the existing code's combining "error" and "no version found".
Both are signalled through `version == -1` and now both cause us to
clear any partial configuration we have picked up. For "extensions.*",
that's fine, since they require a positive version number. For
"core.bare" and "core.worktree", we're already verifying that we have a
non-negative version number before using them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--no-index" is in effect (or implied by the arguments), git-diff
jumps early to a special code path to perform that diff. This means we
miss out on some settings like enabling --ext-diff and --textconv by
default.
Let's jump to the no-index path _after_ we've done more setup on
rev.diffopt. Since some of the options don't affect us (e.g., items
related to the index), let's re-order the setup into two blocks (see the
in-code comments).
Note that we also need to stop re-initializing the diffopt struct in
diff_no_index(). This should not be necessary, as it will already have
been initialized by cmd_diff() (and there are no other callers). That in
turn lets us drop the "repository" argument from diff_no_index (which
never made much sense, since the whole point is that you don't need a
repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When studying the performance of 'git push' we would like to know
how much time is spent at various parts of the command. One area
that could cause performance trouble is 'git pack-objects'.
Add trace2 regions around the three main actions taken in this
command:
1. Enumerate objects.
2. Prepare pack.
3. Write pack-file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The make_cover_letter() function is supposed to open a new file for
writing, and let the caller write into it via FILE *rev->diffopt.file
but because the function does not return anything, the caller does not
bother checking the return value.
Make sure it dies, instead of keep going with a NULL output
filestream and relying on it to cause a crash, when it fails to
open the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolve_ref_unsafe() function can, and sometimes will in the case
of this codepath, return the char * passed to it to the caller. In
this case we construct a strbuf, free it, and then continue using the
dst_name after that free().
The code being fixed dates back to da3efdb17b ("receive-pack: detect
aliased updates which can occur with symrefs", 2010-04-19). When it
was originally added it didn't have this bug, it was introduced when
it was subsequently modified to use strbuf in 6b01ecfe22 ("ref
namespaces: Support remote repositories via upload-pack and
receive-pack", 2011-07-08).
This is theoretically a security issue, the C standard makes no
guarantees that a value you use after free() hasn't been poked at or
changed by something else on the system, but in practice modern OSs
will have mapped the relevant page to this process, so nothing else
would have used it. We do no further allocations between the free()
and use-after-free, so we ourselves didn't corrupt or change the
value.
Jeff investigated that and found: "It probably would be an issue if
the allocation were larger. glibc at least will use mmap()/munmap()
after some cutoff[1], in which case we'd get a segfault from hitting
the unmapped page. But for small allocations, it just bumps brk() and
the memory is still available for further allocations after
free(). [...] If you had a sufficiently large refname you might be
able to trigger the bug [...]. I tried to push such a ref. I had to
manually make a packed-refs file with the long name to avoid
filesystem limits (though probably you could have a long a/b/c/ name
on ext4). But the result can't actually be pushed, because it all has
to fit into a 64k pkt-line as part of the push protocol.".
An a alternative and more succinct way of implementing this would have
been to do the strbuf_release() at the end of check_aliased_update()
and use "goto out" instead of the early "return" statements. Hopefully
this approach of using a helper instead makes it easier to follow.
1. Jeff: "Weirdly, the mmap() cutoff on my glibc system is 135168
bytes. Which is...2^17 + 2^12? 33 pages? I'm sure there's a good
reason for that, but I didn't dig into it."
Reported-by: 王健强 <jianqiang.wang@securitygossip.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a post-index-change hook that is invoked after the index is written in
do_write_locked_index().
This hook is meant primarily for notification, and cannot affect
the outcome of git commands that trigger the index write.
The hook is passed a flag to indicate whether the working directory was
updated or not and a flag indicating if a skip-worktree bit could have
changed. These flags enable the hook to optimize its response to the
index change notification.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-prune command checks reachability by doing a traversal, and then
checking whether a given object exists in the global object hash. This
can yield false positives if any other part of the code had to create an
object struct for some reason. It's not clear whether this is even
possible, but it's more robust to rely on something a little more
concrete: the SEEN flag set by our traversal.
Note that there is a slight possibility of regression here, as we're
relying on mark_reachable_objects() to consistently set the flag.
However, it has always done so, and we're already relying on that fact
in prune_shallow(), which is called as part of git-prune. So this is
making these two parts of the prune operation more consistent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The general strategy of "git prune" is to do a full reachability walk,
then for each loose object see if we found it in our walk. But if we
don't have any loose objects, we don't need to do the expensive walk in
the first place.
This patch postpones that walk until the first time we need to see its
results.
Note that this is really a specific case of a more general optimization,
which is that we could traverse only far enough to find the object under
consideration (i.e., stop the traversal when we find it, then pick up
again when asked about the next object, etc). That could save us in some
instances from having to do a full walk. But it's actually a bit tricky
to do with our traversal code, and you'd need to do a full walk anyway
if you have even a single unreachable object (which you generally do, if
any objects are actually left after running git-repack).
So in practice this lazy-load of the full walk catches one easy but
common case (i.e., you've just repacked via git-gc, and there's nothing
unreachable).
The perf script is fairly contrived, but it does show off the
improvement:
Test HEAD^ HEAD
-------------------------------------------------------------------------
5304.4: prune with no objects 3.66(3.60+0.05) 0.00(0.00+0.00) -100.0%
and would let us know if we accidentally regress this optimization.
Note also that we need to take special care with prune_shallow(), which
relies on us having performed the traversal. So this optimization can
only kick in for a non-shallow repository. Since this is easy to get
wrong and is not covered by existing tests, let's add an extra test to
t5304 that covers this case explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "rebase -i --reschedule-failed-exec", we do not want the "-y"
shortcut after all.
* js/rebase-i-redo-exec-fix:
Revert "rebase: introduce a shortcut for --reschedule-failed-exec"
"git checkout [<tree-ish>] <pathspec>" started reporting the number
of paths that have got updated recently, but the same messages were
given when "git checkout -m <pathspec>" to unresolve conflicts that
have just been resolved. The message now reports these unresolved
paths separately from the paths that are checked out from the index.
* nd/checkout-noisy-unmerge:
checkout: count and print -m paths separately
checkout: update count-checkouts messages
This teaches submodule--helper config the --unset option, which removes
the specified configuration key from the .gitmodule file.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combined diff format for merges will only list one filename, even if
rename or copy detection is active. For example, with raw format one
might see:
::100644 100644 100644 fabadb8cc95eb04866510 MM describe.c
::100755 100755 100755 52b7a2d 6d1ac04 d2ac7d7 RM bar.sh
::100644 100644 100644 e07d6c5 9042e82 ee91881 RR phooey.c
This doesn't let us know what the original name of bar.sh was in the
first parent, and doesn't let us know what either of the original names
of phooey.c were in either of the parents. In contrast, for non-merge
commits, raw format does provide original filenames (and a rename score
to boot). In order to also provide original filenames for merge
commits, add a --combined-all-paths option (which must be used with
either -c or --cc, and is likely only useful with rename or copy
detection active) so that we can print tab-separated filenames when
renames are involved. This transforms the above output to:
::100644 100644 100644 fabadb8cc95eb04866510 MM desc.c desc.c desc.c
::100755 100755 100755 52b7a2d 6d1ac04 d2ac7d7 RM foo.sh bar.sh bar.sh
::100644 100644 100644 e07d6c5 9042e82 ee91881 RR fooey.c fuey.c phooey.c
Further, in patch format, this changes the from/to headers so that
instead of just having one "from" header, we get one for each parent.
For example, instead of having
--- a/phooey.c
+++ b/phooey.c
we would see
--- a/fooey.c
--- a/fuey.c
+++ b/phooey.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git --work-tree=$there --git-dir=$here describe --dirty" did not
work correctly as it did not pay attention to the location of the
worktree specified by the user by mistake, which has been
corrected.
* ss/describe-dirty-in-the-right-directory:
t6120: test for describe with a bare repository
describe: setup working tree for --dirty
"git rebase -x $cmd" did not reject multi-line command, even though
the command is incapable of handling such a command. It now is
rejected upfront.
* pw/rebase-x-sanity-check:
rebase -x: sanity check command
The documentation of "git commit-tree" said that the command
understands "--gpg-sign" in addition to "-S", but the command line
parser did not know about the longhand, which has been corrected.
* br/commit-tree-fully-spelled-gpg-sign-option:
commit-tree: add missing --gpg-sign flag
t7510: invoke git as part of &&-chain
"git pack-objects" learned another algorithm to compute the set of
objects to send, that trades the resulting packfile off to save
traversal cost to favor small pushes.
* ds/push-sparse-tree-walk:
pack-objects: create GIT_TEST_PACK_SPARSE
pack-objects: create pack.useSparse setting
revision: implement sparse algorithm
list-objects: consume sparse tree walk
revision: add mark_tree_uninteresting_sparse
A new date format "--date=human" that morphs its output depending
on how far the time is from the current time has been introduced.
"--date=auto" can be used to use this new format when the output is
going to the pager or to the terminal and otherwise the default
format.
* lt/date-human:
Add `human` date format tests.
Add `human` format to test-tool
Add 'human' date format documentation
Replace the proposed 'auto' mode with 'auto:'
Add 'human' date format
Code cleanup.
* jk/unused-parameter-cleanup:
convert: drop path parameter from actual conversion functions
convert: drop len parameter from conversion checks
config: drop unused parameter from maybe_remove_section()
show_date_relative(): drop unused "tz" parameter
column: drop unused "opts" parameter in item_length()
create_bundle(): drop unused "header" parameter
apply: drop unused "def" parameter from find_name_gnu()
match-trees: drop unused path parameter from score functions
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
Instead of going through "git-rebase--am" scriptlet to use the "am"
backend, the built-in version of "git rebase" learned to drive the
"am" backend directly.
* js/rebase-am:
built-in rebase: call `git am` directly
rebase: teach `reset_head()` to optionally skip the worktree
rebase: avoid double reflog entry when switching branches
rebase: move `reset_head()` into a better spot
More code in "git bisect" has been rewritten in C.
* tt/bisect-in-c:
bisect--helper: `bisect_start` shell function partially in C
bisect--helper: `get_terms` & `bisect_terms` shell function in C
bisect--helper: `bisect_next_check` shell function in C
bisect--helper: `check_and_set_terms` shell function in C
wrapper: move is_empty_file() and rename it as is_empty_or_missing_file()
bisect--helper: `bisect_write` shell function in C
bisect--helper: `bisect_reset` shell function in C
"git cat-file --batch" reported a dangling symbolic link by
mistake, when it wanted to report that a given name is ambiguous.
* dt/cat-file-batch-ambiguous:
t1512: test ambiguous cat-file --batch and --batch-output
Do not print 'dangling' for cat-file in case of ambiguity
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
Since 0f086e6dca (checkout: print something when checking out paths -
2018-11-13), this command reports how many paths have been updated
from what source (either from a tree, or from the index). I forget
that there's a third source: when -m is used, the merge conflict is
re-created (granted, also from the index, but it's not a straight copy
from the index).
Count and report unmerged paths separately. There's a bit more update
to avoid reporting:
Recreated X merge conflicts
Updated 0 paths from the index
The second line is unnecessary. Though if there's no conflict
recreation, we still report
Updated 0 paths from the index
to make it clear we're not really doing anything.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0f086e6dca [1] counts the number of files updated by "git
checkout -- <paths>" command and prints it. Later on 536ec1839d [2]
adds the ability to remove files in "git checkout -- <paths>". This is
still an update on worktree and should be reported to the user.
To prepare for such an update since that commit is on track to
'master' now, the messages are rephrased to avoid "checked out" which
does not imply file deletion.
[1] 0f086e6dca (checkout: print something when checking out paths -
2018-11-13)
[2] 536ec1839d (entry: support CE_WT_REMOVE flag in checkout_entry -
2018-12-20)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch was contributed only as a tentative "we could introduce a
convenient short option if we do not want to change the default behavior
in the long run" patch, opening the discussion whether other people
agree with deprecating the current behavior in favor of the rescheduling
behavior.
But the consensus on the Git mailing list was that it would make sense
to show a warning in the near future, and flip the default
rebase.rescheduleFailedExec to reschedule failed `exec` commands by
default. See e.g.
<CAGZ79kZL5CRqCDRb6B-EedUm8Z_i4JuSF2=UtwwdRXMitrrOBw@mail.gmail.com>
So let's back out that patch that added the `-y` short option that we
agreed was not necessary or desirable.
This reverts commit 81ef8ee75d.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When GIT_SEQUENCE_EDITOR is set, the command was incorrectly
started when modes of "git rebase" that implicitly uses the
machinery for the interactive rebase are run, which has been
corrected.
* pw/no-editor-in-rebase-i-implicit:
implicit interactive rebase: don't run sequence editor
"git checkout -b <new> [HEAD]" to create a new branch from the
current commit and check it out ought to be a no-op in the index
and the working tree in normal cases, but there are corner cases
that do require updates to the index and the working tree. Running
it immediately after "git clone --no-checkout" is one of these
cases that an earlier optimization kicked in incorrectly, which has
been fixed.
* bp/checkout-new-branch-optim:
checkout: fix regression in checkout -b on intitial checkout
checkout: add test demonstrating regression with checkout -b on initial commit
"git pack-objects" incorrectly used uninitialized mutex, which has
been corrected.
* ph/pack-objects-mutex-fix:
pack-objects: merge read_lock and lock in packing_data struct
pack-objects: move read mutex to packing_data struct
The codepath to show progress meter while writing out commit-graph
file has been improved.
* ab/commit-graph-write-progress:
commit-graph write: emit a percentage for all progress
commit-graph write: add itermediate progress
commit-graph write: remove empty line for readability
commit-graph write: add more descriptive progress output
commit-graph write: show progress for object search
commit-graph write: more descriptive "writing out" output
commit-graph write: add "Writing out" progress output
commit-graph: don't call write_graph_chunk_extra_edges() unnecessarily
commit-graph: rename "large edges" to "extra edges"
"git add --ignore-errors" did not work as advertised and instead
worked as an unintended synonym for "git add --renormalize", which
has been fixed.
* jk/add-ignore-errors-bit-assignment-fix:
add: use separate ADD_CACHE_RENORMALIZE flag
"git fetch" and "git upload-pack" learned to send all exchange over
the sideband channel while talking the v2 protocol.
* jt/fetch-v2-sideband:
tests: define GIT_TEST_SIDEBAND_ALL
{fetch,upload}-pack: sideband v2 fetch response
sideband: reverse its dependency on pkt-line
pkt-line: introduce struct packet_writer
pack-protocol.txt: accept error packets in any context
Use packet_reader instead of packet_read_line
Update the protocol message specification to allow only the limited
use of scaled quantities. This is ensure potential compatibility
issues will not go out of hand.
* js/filter-options-should-use-plain-int:
filter-options: expand scaled numbers
tree:<depth>: skip some trees even when collecting omits
list-objects-filter: teach tree:# how to handle >0
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
SZEDER reported that test case t5323 has different test result on MacOS.
This is because `cmp_pack_list_reverse` cannot give identical result
when two pack being sorted has the same size of remaining_objects.
Changes to the sorting function will make consistent test result for
t5323.
The new algorithm to find redundant packs is a trade-off to save memory
resources, and the result of it may be different with old one, and may
be not the best result sometimes. Update t5323 for the new algorithm.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New algorithm uses `pack_list.all_objects` to track remaining objects,
so rename it to `pack_list.remaining_objects`.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `git pack-redundant --all`, if there are too many local
packs and too many redundant objects within them, the too deep iteration
of `get_permutations` will exhaust all the resources, and the process of
`git pack-redundant` will be killed.
The following script could create a repository with too many redundant
packs, and running `git pack-redundant --all` in the `test.git` repo
will die soon.
#!/bin/sh
repo="$(pwd)/test.git"
work="$(pwd)/test"
i=1
max=199
if test -d "$repo" || test -d "$work"; then
echo >&2 "ERROR: '$repo' or '$work' already exist"
exit 1
fi
git init -q --bare "$repo"
git --git-dir="$repo" config gc.auto 0
git --git-dir="$repo" config transfer.unpackLimit 0
git clone -q "$repo" "$work" 2>/dev/null
while :; do
cd "$work"
echo "loop $i: $(date +%s)" >$i
git add $i
git commit -q -sm "loop $i"
git push -q origin HEAD:master
printf "\rCreate pack %4d/%d\t" $i $max
if test $i -ge $max; then break; fi
cd "$repo"
git repack -q
if test $(($i % 2)) -eq 0; then
git repack -aq
pack=$(ls -t $repo/objects/pack/*.pack | head -1)
touch "${pack%.pack}.keep"
fi
i=$((i+1))
done
printf "\ndone\n"
To get the `min` unique pack list, we can replace the iteration in
`minimize` function with a new algorithm, and this could solve this
issue:
1. Get the unique and non_uniqe packs, add the unique packs to the
`min` list.
2. Remove the objects of unique packs from non_unique packs, then each
object left in the non_unique packs will have at least two copies.
3. Sort the non_unique packs by the objects' size, more objects first,
and add the first non_unique pack to `min` list.
4. Drop the duplicated objects from other packs in the ordered
non_unique pack list, and repeat step 3.
Some test cases will fail on Mac OS X. Mark them and will resolve in
later commit.
Original PR and discussions: https://github.com/jiangxin/git/pull/25
Signed-off-by: Sun Chao <sunchao9@huawei.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The objects in alt-odb are removed from `all_objects` twice in `load_all_objects`
and `scan_alt_odb_packs`, remove it from the later function.
Signed-off-by: Sun Chao <sunchao9@huawei.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of initializing unique_objects in `add_pack()`, copy from
all_objects in `cmp_two_packs()`, when unwanted objects are removed from
all_objects.
This will save memory (no allocate memory for alt-odb packs), and run
`llist_sorted_difference_inplace()` only once when removing ignored
objects and removing objects in alt-odb in `scan_alt_odb_packs()`.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts 1495ff7da5 ("checkout: introduce checkout.overlayMode
config", 2019-01-08) and thus removes the checkout.overlayMode config
option.
The option was originally introduced to give users the option to make
the new no-overlay behaviour the default. However users may be using
'git checkout' in scripts, even though it is porcelain. Users setting
the option to false may actually end up accidentally breaking scripts.
With the introduction of a new subcommand that will make the behaviour
the default, the config option will not be needed anymore anyway.
Revert the commit and remove the config option, so we don't risk
breaking scripts.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.
Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.
This adds support to git config for author.email, author.name,
committer.email and committer.name settings so this information
can be set per repository.
Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't use NEED_WORK_TREE when running the git-describe builtin,
since you should be able to describe a commit even in a bare repository.
However, the --dirty flag does need a working tree. Since we don't call
setup_work_tree(), it uses whatever directory we happen to be in. That's
unlikely to match our index, meaning we'd say "dirty" even when the real
working tree is clean.
We can fix that by calling setup_work_tree() once we know that the user
has asked for --dirty.
The --broken option also needs a working tree. But because its
implementation calls git-diff-index we don‘t have to setup the working
tree in the git-describe process.
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gives an empty argument to --exec then git creates a todo
list that it cannot parse. The rebase starts to run before erroring out
with
error: missing arguments for exec
error: invalid line 2: exec
You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.
Or you can abort the rebase with 'git rebase --abort'.
Instead check for empty commands before starting the rebase.
Also check that the command does not contain any newlines as the
todo-list format is unable to cope with multiline commands. Note that
this changes the behavior, before this change one could do
git rebase --exec='echo one
exec echo two'
and it would insert two exec lines in the todo list, now it will error
out.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Custom userformat "log --format" learned %S atom that stands for
the tip the traversal reached the commit from, i.e. --source.
* it/log-format-source:
log: add %S option (like --source) to log --format
"git add -e" got confused when the change it wants to let the user
edit is smaller than the previous change that was left over in a
temporary file.
* js/add-e-clear-patch-before-stating:
add --edit: truncate the patch file
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
"git rebase" internally runs "checkout" to switch between branches,
and the command used to call the post-checkout hook, but the
reimplementation stopped doing so, which is getting fixed.
* os/rebase-runs-post-checkout-hook:
rebase: run post-checkout hook on checkout
t5403: simplify by using a single repository
"git fetch --recurse-submodules" may not fetch the necessary commit
that is bound to the superproject, which is getting corrected.
* sb/submodule-recursive-fetch-gets-the-tip:
fetch: ensure submodule objects fetched
submodule.c: fetch in submodules git directory instead of in worktree
submodule: migrate get_next_submodule to use repository structs
repository: repo_submodule_init to take a submodule struct
submodule: store OIDs in changed_submodule_names
submodule.c: tighten scope of changed_submodule_names struct
submodule.c: sort changed_submodule_names before searching it
submodule.c: fix indentation
sha1-array: provide oid_array_filter
There were many places the code relied on the string returned from
getenv() to be non-volatile, which is not true, that have been
corrected.
* jk/save-getenv-result:
builtin_diff(): read $GIT_DIFF_OPTS closer to use
merge-recursive: copy $GITHEAD strings
init: make a copy of $GIT_DIR string
config: make a copy of $GIT_CONFIG string
commit: copy saved getenv() result
get_super_prefix(): copy getenv() result
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
This refactors check_todo_list() to work on a todo_list to avoid
redundant reads and writes to the disk. The function is renamed
todo_list_check(). The parsing of the two todo lists is left to the
caller.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, check_todo_list_from_file(). It reads the file
from the disk, parses it, pass the todo_list to todo_list_check(), and
writes it back to the disk.
As get_missing_commit_check_level() and the enum
missing_commit_check_level are no longer needed inside of sequencer.c,
they are moved to rebase-interactive.c, and made static again.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors transform_todos() to work on a todo_list. The function
is renamed todo_list_transform().
As rebase -p still need to check the todo list from the disk, a new
function is introduced, transform_todo_file(). It is still used by
complete_action() and edit_todo_list() for now, but they will be
replaced in a future commit.
todo_list_transform() is not a static function, because it will be used
by edit_todo_list() from rebase-interactive.c in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the packing_data lock to obd_lock and upgrade it to a recursive
mutex to make it suitable for current read_lock usages. Additionally
remove the superfluous #ifndef NO_PTHREADS guard around mutex
initialization in prepare_packing_data as the mutex functions
themselves are already protected.
Signed-off-by: Patrick Hogg <phogg@novamoon.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ac77d0c37 ("pack-objects: shrink size field in struct object_entry",
2018-04-14) added an extra usage of read_lock/read_unlock in the newly
introduced oe_get_size_slow for thread safety in parallel calls to
try_delta(). Unfortunately oe_get_size_slow is also used in serial
code, some of which is called before the first invocation of
ll_find_deltas. As such the read mutex is not guaranteed to be
initialized.
Resolve this by moving the read mutex to packing_data and initializing
it in prepare_packing_data which is initialized in cmd_pack_objects.
Signed-off-by: Patrick Hogg <phogg@novamoon.net>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_SEQUENCE_EDITOR is set then rebase runs it when executing
implicit interactive rebases which are supposed to appear
non-interactive to the user. Fix this by setting GIT_SEQUENCE_EDITOR=:
rather than GIT_EDITOR=:. A couple of tests relied on the old behavior
so they are updated to work with the new regime.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPTION_CALLBACK is much simpler/safer to use, but parse_opt_cb does
not allow access to parse_opt_ctx_t, which sometimes is useful
(e.g. to obtain the prefix).
Extending parse_opt_cb to take parse_opt_cb could result in a lot of
changes. Instead let's just allow ll_callback to be used with
OPTION_CALLBACK. The user will have to be careful, not to change
anything in ctx, or return wrong result code. But that's the price for
ll_callback.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give names to these magic negative numbers. Make parse_opt_ll_cb
return an enum to make clear it can actually control parse_options()
with different return values (parse_opt_cb can too, but nobody needs
it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lowlevel callbacks have different function signatures. Add a new field
in 'struct option' with the right type for lowlevel callbacks.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have a remote named "jch" and it has a branch with the same name. And
fetch.output is set to "compact". Fetching this remote looks like this
From https://github.com/gitster/git
+ eb7fd39f6b...835363af2f jch -> */jch (forced update)
6f11fd5edb..59b12ae96a nd/config-move-to -> jch/*
* [new branch] nd/diff-parseopt -> jch/*
* [new branch] nd/the-index-final -> jch/*
Notice that the local side of branch jch starts with "*" instead of
ending with it like the rest. It's not exactly wrong. It just looks
weird.
This patch changes the find-and-replace code a bit to try finding prefix
first before falling back to strstr() which finds a substring from left
to right. Now we have something less OCD
From https://github.com/gitster/git
+ eb7fd39f6b...835363af2f jch -> jch/* (forced update)
6f11fd5edb..59b12ae96a nd/config-move-to -> jch/*
* [new branch] nd/diff-parseopt -> jch/*
* [new branch] nd/the-index-final -> jch/*
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to pass a header struct to create_bundle(); it writes
the header information directly to a descriptor (and does not report
back details to the caller).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a 'checkout -b' do a full checkout including updating the working
tree when doing the initial checkout. As the new test involves an filesystem
access, do it later in the sequence to give chance to other cheaper tests to
leave early. This fixes the regression in behavior caused by fa655d8411
(checkout: optimize "git checkout -b <new_branch>", 2018-08-16).
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --gpg-sign option in commit-tree, which was documented, but not
implemented, in 55ca3f99ae. Add tests for the --gpg-sign option.
Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return values -1 and -2 from get_oid could mean two different
things, depending on whether they were from an enum returned by
get_tree_entry_follow_symlinks, or from a different code path. This
caused 'dangling' to be printed from a git cat-file in the case of an
ambiguous (-2) result.
Unify the results of get_oid* and get_tree_entry_follow_symlinks to be
one common type, with unambiguous values.
Signed-off-by: David Turner <novalis@novalis.org>
Reported-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" and "git repack" did not close the open packfiles that
they found unneeded before removing them, which didn't work on a
platform incapable of removing an open file. This has been
corrected.
* js/gc-repack-close-before-remove:
gc/repack: release packs when needed
"git worktree remove" and "git worktree move" refused to work when
there is a submodule involved. This has been loosened to ignore
uninitialized submodules.
* nd/worktree-remove-with-uninitialized-submodules:
worktree: allow to (re)move worktrees with uninitialized submodules
The core.worktree setting in a submodule repository should not be
pointing at a directory when the submodule loses its working tree
(e.g. getting deinit'ed), but the code did not properly maintain
this invariant.
* sb/submodule-unset-core-worktree-when-worktree-is-lost:
submodule deinit: unset core.worktree
submodule--helper: fix BUG message in ensure_core_worktree
submodule: unset core.worktree if no working tree is present
submodule update: add regression test with old style setups
"git stripspace" should be usable outside a git repository, but
under the "-s" or "-c" mode, it didn't.
* jn/stripspace-wo-repository:
stripspace: allow -s/-c outside git repository
"git submodule update" ought to use a single job unless asked, but
by mistake used multiple jobs, which has been fixed.
* sb/submodule-fetchjobs-default-to-one:
submodule update: run at most one fetch job unless otherwise set
This adds --date=human, which skips the timezone if it matches the
current time-zone, and doesn't print the whole date if that matches (ie
skip printing year for dates that are "this year", but also skip the
whole date itself if it's in the last few days and we can just say what
weekday it was).
For really recent dates (same day), use the relative date stamp, while
for old dates (year doesn't match), don't bother with time and timezone.
Also add 'auto' date mode, which defaults to human if we're using the
pager. So you can do
git config --add log.date auto
and your "git log" commands will show the human-legible format unless
you're scripting things.
Note that this time format still shows the timezone for recent enough
events (but not so recent that they show up as relative dates). You can
combine it with the "-local" suffix to never show timezones for an even
more simplified view.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the scripted `git rebase` still has to rely on the
`git-rebase--am.sh` script to implement the glue between the `rebase`
and the `am` commands, we can go a more direct route in the built-in
rebase and avoid using a shell script altogether.
This patch represents a straight-forward port of `git-rebase--am.sh` to
C, along with the glue code to call it directly from within
`builtin/rebase.c`.
This reduces the chances of Git for Windows running into trouble due to
problems with the POSIX emulation layer (known as "MSYS2 runtime",
itself a derivative of the Cygwin runtime): when no shell script is
called, the POSIX emulation layer is avoided altogether.
Note: we pass an empty action to `reset_head()` here when moving back to
the original branch, as no other action is applicable, really. This
parameter is used to initialize `unpack_trees()`' messages.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is what the legacy (scripted) rebase does in
`move_to_original_branch`, and we will need this functionality in the
next commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching a branch *and* updating said branch to a different
revision, let's avoid a double entry in HEAD's reflog by first updating
the branch and then adjusting the symbolic ref HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the next commits, we want to make use of it in `run_am()` (i.e.
running the `--am` backend directly, without detouring to Unix shell
script code) which in turn will be called from `run_specific_rebase()`.
So let's move it before that latter function.
This commit is best viewed using --color-moved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a test variable GIT_TEST_PACK_SPARSE to enable the sparse
object walk algorithm by default during the test suite. Enabling
this variable ensures coverage in many interesting cases, such as
shallow clones, partial clones, and missing objects.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--sparse' flag in 'git pack-objects' changes the algorithm
used to enumerate objects to one that is faster for individual
users pushing new objects that change only a small cone of the
working directory. The sparse algorithm is not recommended for a
server, which likely sends new objects that appear across the
entire working directory.
Create a 'pack.useSparse' setting that enables this new algorithm.
This allows 'git push' to use this algorithm without passing a
'--sparse' flag all the way through four levels of run_command()
calls.
If the '--no-sparse' flag is set, then this config setting is
overridden.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a pack-file using 'git pack-objects --revs' we provide
a list of interesting and uninteresting commits. For example, a push
operation would make the local topic branch be interesting and the
known remote refs as uninteresting. We want to discover the set of
new objects to send to the server as a thin pack.
We walk these commits until we discover a frontier of commits such
that every commit walk starting at interesting commits ends in a root
commit or unintersting commit. We then need to discover which
non-commit objects are reachable from uninteresting commits. This
commit walk is not changing during this series.
The mark_edges_uninteresting() method in list-objects.c iterates on
the commit list and does the following:
* If the commit is UNINTERSTING, then mark its root tree and every
object it can reach as UNINTERESTING.
* If the commit is interesting, then mark the root tree of every
UNINTERSTING parent (and all objects that tree can reach) as
UNINTERSTING.
At the very end, we repeat the process on every commit directly
given to the revision walk from stdin. This helps ensure we properly
cover shallow commits that otherwise were not included in the
frontier.
The logic to recursively follow trees is in the
mark_tree_uninteresting() method in revision.c. The algorithm avoids
duplicate work by not recursing into trees that are already marked
UNINTERSTING.
Add a new 'sparse' option to the mark_edges_uninteresting() method
that performs this logic in a slightly different way. As we iterate
over the commits, we add all of the root trees to an oidset. Then,
call mark_trees_uninteresting_sparse() on that oidset. Note that we
include interesting trees in this process. The current implementation
of mark_trees_unintersting_sparse() will walk the same trees as
the old logic, but this will be replaced in a later change.
Add a '--sparse' flag in 'git pack-objects' to call this new logic.
Add a new test script t/t5322-pack-objects-sparse.sh that tests this
option. The tests currently demonstrate that the resulting object
list is the same as the old algorithm. This includes a case where
both algorithms pack an object that is not needed by a remote due to
limits on the explored set of trees. When the sparse algorithm is
changed in a later commit, we will add a test that demonstrates a
change of behavior in some cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9472935d81 (add: introduce "--renormalize", 2017-11-16) taught
git-add to pass HASH_RENORMALIZE to add_to_index(), which then passes
the flag along to index_path(). However, the flags taken by
add_to_index() and the ones taken by index_path() are distinct
namespaces. We cannot take HASH_* flags in add_to_index(), because they
overlap with the ADD_CACHE_* flags we already take (in this case,
HASH_RENORMALIZE conflicts with ADD_CACHE_IGNORE_ERRORS).
We can solve this by adding a new ADD_CACHE_RENORMALIZE flag, and using
it to set HASH_RENORMALIZE within add_to_index(). In order to make it
clear that these two flags come from distinct sets, let's also change
the name "newflags" in the function to "hash_flags".
Reported-by: Dmitriy Smirnov <dmitriy.smirnov@jetbrains.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When communicating with a remote server or a subprocess, use
expanded numbers rather than numbers with scaling suffix in the
object filter spec (e.g. "limit:blob=1k" becomes
"limit:blob=1024").
Update the protocol docs to note that clients should always perform this
expansion, to allow for more compatibility between server
implementations.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is already a .git/ADD_EDIT.patch file, we fail to truncate it
properly, which could result in very funny errors.
Of course, this file should not be left lying around. But at least in
one case, there was a stale copy, larger than the current diff. So the
result was a corrupt diff.
Let's just truncate the file when we write it and not worry about it too
much.
Reported by J Wyman.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a tree, we read the object ID directly out of the tree
buffer. This is normally fine, but such an object ID cannot be used with
oidcpy, which copies GIT_MAX_RAWSZ bytes, because if we are using SHA-1,
there may not be that many bytes to copy.
Instead, store the object ID in a separate struct member. Since we can
no longer efficiently compute the path length, store that information as
well in struct name_entry. Ensure we only copy the object ID into the
new buffer if the path length is nonzero, as some callers will pass us
an empty path with no object ID following it, and we will not want to
read past the end of the buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout [<tree-ish>] path..." learned to report the number of
paths that have been checked out of the index or the tree-ish,
which gives it the same degree of noisy-ness as the case in which
the command checks out a branch.
* nd/checkout-noisy:
t0027: squelch checkout path run outside test_expect_* block
checkout: print something when checking out paths
The traversal over tree objects has learned to honor
":(attr:label)" pathspec match, which has been implemented only for
enumerating paths on the filesystem.
* nd/attr-pathspec-in-tree-walk:
tree-walk: support :(attr) matching
dir.c: move, rename and export match_attrs()
pathspec.h: clean up "extern" in function declarations
tree-walk.c: make tree_entry_interesting() take an index
tree.c: make read_tree*() take 'struct repository *'
This kills the_index dependency in get_oid_with_context() but for
get_oid() and friends, they still assume the_repository (which also
means the_index).
Unfortunately the widespread use of get_oid() will make it hard to
make the conversion now. We probably will add repo_get_oid() at some
point and limit the use of get_oid() in builtin/ instead of forcing
all get_oid() call sites to carry struct repository.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_index() shares the same problem as hold_locked_index(): it
assumes $GIT_DIR/index. Move all call sites to repo_read_index()
instead. read_index_preload() and read_index_unmerged() are also
killed as a consequence.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command is probably the first one that operates on a repository
other than the_repository, in f9ee2fcdfa (grep: recurse in-process
using 'struct repository' - 2017-08-02). An explicit 'struct
repository *' was added in that commit to pass around the repository
that we're supposed to grep from.
Since 38bbc2ea39 (grep.c: remove implicit dependency on the_index -
2018-09-21). 'struct grep_opt *' carries in itself a repository
parameter for grepping. We should now be able to reuse grep_opt to
hold the submodule repo instead of a separate argument, which is just
room for mistakes.
While at there, use the right reference instead of the_repository and
the_index in this code. I was a bit careless in my attempt to kick
the_repository / the_index out of library code. It's normally safe to
just stick the_repository / the_index in bultin/ code, but it's not
the case for grep.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is "extensions.partialclone" and "core.partialCloneFilter", but
not "core.partialclone". Only "extensions.partialclone" is meant to
contain a remote name.
While at it, let's wrap the relevant code lines to keep them at a
reasonable length.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $GITHEAD_1234abcd is set in the environment, we use its value as a
"better branch name" in generating conflict markers. However, we pick
these better names early in the process, and the return value from
getenv() is not guaranteed to stay valid.
Let's make a copy of the returned string. And to make memory management
easier, let's just always return an allocated string from
better_branch_name(), so we know that it must always be freed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pass the result of getenv("GIT_DIR") to init_db() and assume that the
string remains valid. But that's not guaranteed across calls to setenv()
or even getenv(), although it often works in practice. Let's make a copy
of the string so that we follow the rules.
Note that we need to mark it with UNLEAK(), since the value persists
until the end of program (but we have no opportunity to free it).
This patch also handles $GIT_WORK_TREE the same way. It actually doesn't
have as long a lifetime and is probably fine, but it's simpler to just
treat the two side-by-side variables the same.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_config() points our source filename pointer at the return value of
getenv(), but that value may be invalidated by further calls to
environment functions. Let's copy it to make sure it remains valid.
We don't need to bother freeing it, as it remains part of the
whole-process global state until we exit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We save the result of $GIT_INDEX_FILE so that we can restore it after
setting it to a new value and running add--interactive. However, the
pointer returned by getenv() is not guaranteed to be valid after calling
setenv(). This _usually_ works fine, but can fail if libc needs to
reallocate the environment block during the setenv().
Let's just duplicate the string, so we know that it remains valid.
In the long run it may be more robust to teach interactive_add() to take
a set of environment variables to pass along to run-command when it
execs add--interactive. And then we would not have to do this
save/restore dance at all. But this is an easy fix in the meantime.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to write for example
git log --format="%H,%S"
where the %S at the end is a new placeholder that prints out the ref
(tag/branch) for each commit.
Using %d might seem like an alternative but it only shows the ref for the last
commit in the branch.
Signed-off-by: Issac Trotts <issactrotts@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, files cannot be removed nor renamed if there are still
handles held by a process. To remedy that, we introduced the
close_all_packs() function.
Earlier, we made sure that the packs are released just before `git gc`
is spawned, in case that gc wants to remove no-longer needed packs.
But this developer forgot that gc itself also needs to let go of packs,
e.g. when consolidating all packs via the --aggressive option.
Likewise, `git repack -d` wants to delete obsolete packs and therefore
needs to close all pack handles, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the scaffolding for protocol version 2 was initially added in
8f6982b4e1 ("protocol: introduce enum protocol_version value
protocol_v2", 2018-03-14). As seen in:
git log -p -G'support for protocol v2 not implemented yet' --full-diff --reverse v2.17.0..v2.20.0
Many of those scaffolding "die" placeholders were removed, but we
hadn't gotten around to fetch-pack yet.
The test here for "fetch refs from cmdline" is very minimal. There's
much better coverage when running the entire test suite under the WIP
GIT_TEST_PROTOCOL_VERSION=2 mode[1], we should ideally have better
coverage without needing to invoke a special test mode.
1. https://public-inbox.org/git/20181213155817.27666-1-avarab@gmail.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous patch we introduced a new no-overlay mode for git
checkout. Some users (such as the author of this commit) may want to
have this mode turned on by default as it matches their mental model
more closely. Make that possible by introducing a new config option
to that extend.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git checkout' is defined as an overlay operation, which
means that if in 'git checkout <tree-ish> -- [<pathspec>]' we have an
entry in the index that matches <pathspec>, but that doesn't exist in
<tree-ish>, that entry will not be removed from the index or the
working tree.
Introduce a new --{,no-}overlay option, which allows using 'git
checkout' in non-overlay mode, thus removing files from the working
tree if they do not exist in <tree-ish> but match <pathspec>.
Note that 'git checkout -p <tree-ish> -- [<pathspec>]' already works
this way, so no changes are needed for the patch mode. We disallow
'git checkout --overlay -p' to avoid confusing users who would expect
to be able to force overlay mode in 'git checkout -p' this way.
Untracked files are not affected by this change, so 'git checkout
--no-overlay HEAD -- untracked' will not remove untracked from the
working tree. This is so e.g. 'git checkout --no-overlay HEAD -- dir/'
doesn't delete all untracked files in dir/, but rather just resets the
state of files that are known to git.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only remaining callers of has_sha1_file() actually have an object_id
already. They can use the "object" variant, rather than dereferencing
the hash themselves.
The code changes here were completely generated by the included
coccinelle patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit abef9020e3 (sha1_file: convert sha1_object_info* to object_id,
2018-03-12) renamed the function to oid_object_info(), but missed some
comments which mention it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of an ongoing effort to make rebase have more uniform behavior,
modify the merge backend to behave like the interactive one, by
re-implementing it on top of the latter.
Interactive rebases are implemented in terms of cherry-pick rather than
the merge-recursive builtin, but cherry-pick also calls into the
recursive merge machinery by default and can accept special merge
strategies and/or special strategy options. As such, there really is
not any need for having both git-rebase--merge and
git-rebase--interactive anymore. Delete git-rebase--merge.sh and
instead implement it in builtin/rebase.c.
This results in a few deliberate but small user-visible changes:
* The progress output is modified (see t3406 and t3420 for examples)
* A few known test failures are now fixed (see t3421)
* bash-prompt during a rebase --merge is now REBASE-i instead of
REBASE-m. Reason: The prompt is a reflection of the backend in use;
this allows users to report an issue to the git mailing list with
the appropriate backend information, and allows advanced users to
know where to search for relevant control files. (see t9903)
testcase modification notes:
t3406: --interactive and --merge had slightly different progress output
while running; adjust a test to match the new expectation
t3420: these test precise output while running, but rebase--am,
rebase--merge, and rebase--interactive all were built on very
different commands (am, merge-recursive, cherry-pick), so the
tests expected different output for each type. Now we expect
--merge and --interactive to have the same output.
t3421: --interactive fixes some bugs in --merge! Wahoo!
t9903: --merge uses the interactive backend so the prompt expected is
now REBASE-i.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Uninitialized submodules have nothing valueable for us to be worried
about. They are just SHA-1. Let "worktree remove" and "worktree move"
continue in this case so that people can still use multiple worktrees
on repos with optional submodules that are never populated, like
sha1collisiondetection in git.git when checked out by doc-diff script.
Note that for "worktree remove", it is possible that a user
initializes a submodule (*), makes some commits (but not push), then
deinitializes it. At that point, the submodule is unpopulated, but the
precious new commits are still in
$GIT_COMMON_DIR/worktrees/<worktree>/modules/<submodule>
directory and we should not allow removing the worktree or we lose
those commits forever. The new directory check is added to prevent
this.
(*) yes they are screwed anyway by doing this since "git submodule"
would add submodule.* in $GIT_COMMON_DIR/config, which is shared
across multiple worktrees. But it does not mean we let them be
screwed even more.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refspecs configured with "git -c var=val clone" did not propagate
to the resulting repository, which has been corrected.
* sg/clone-initial-fetch-configuration:
Documentation/clone: document ignored configuration variables
clone: respect additional configured fetch refspecs during initial fetch
clone: use a more appropriate variable name for the default refspec
"git checkout frotz" (without any double-dash) avoids ambiguity by
making sure 'frotz' cannot be interpreted as a revision and as a
path at the same time. This safety has been updated to check also
a unique remote-tracking branch 'frotz' in a remote, when dwimming
to create a local branch 'frotz' out of a remote-tracking branch
'frotz' from a remote.
* nd/checkout-dwim-fix:
checkout: disambiguate dwim tracking branches and local files
Small fixes and features for fast-export and fast-import, mostly on
the fast-export side.
* en/fast-export-import:
fast-export: add a --show-original-ids option to show original names
fast-import: remove unmaintained duplicate documentation
fast-export: add --reference-excluded-parents option
fast-export: ensure we export requested refs
fast-export: when using paths, avoid corrupt stream with non-existent mark
fast-export: move commit rewriting logic into a function for reuse
fast-export: avoid dying when filtering by paths and old tags exist
fast-export: use value from correct enum
git-fast-export.txt: clarify misleading documentation about rev-list args
git-fast-import.txt: fix documentation for --quiet option
fast-export: convert sha1 to oid
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
More _("i18n") markings.
* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation
Factor out the code that marks a cache entry as matched for checkout
into a separate function. We are going to introduce a new mode in
'git checkout' in a subsequent commit, that is going to have a
slightly different logic. This would make this code unnecessarily
complex.
Moving that complexity into separate functions will make the code in
the subsequent step easier to follow.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The key point for the if statement is that read_tree_some did not
update the entry, because either it doesn't exist in tree-ish or
doesn't match the pathspec. Clarify that.
Suggested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of rebase used to run this hook on the initial
checkout. The transition to built-in introduced a regression.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
