A few places in the documentation referred to the "`recursive` strategy"
using the phrase "`git merge-recursive`", suggesting that it was forking
subprocesses to call a toplevel builtin. Perhaps that was relevant to
when rebase was a shell script, but it seems like a rather indirect way
to refer to the `recursive` strategy. Simplify the references.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 0c4fd732f0 ("Move computation of dir_rename_count from
merge-ort to diffcore-rename", 2021-02-27), much of the logic for
computing directory renames moved into diffcore-rename.
directory-rename-detection.txt had claims that all of that logic was
found in merge-recursive. Update the documentation.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --rebase-merges was first introduced, it only worked with the
`recursive` strategy. Some time later, it gained support for merges
using the `octopus` strategy. The limitation of only supporting these
two strategies was documented in 25cff9f109 ("rebase -i --rebase-merges:
add a section to the man page", 2018-04-25) and lifted in e145d99347
("rebase -r: support merge strategies other than `recursive`",
2019-07-31). However, when the limitation was lifted, the documentation
was not updated. Update it now.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local changes stashed by "git merge --autostash" were lost when
the merge failed in certain ways, which has been corrected.
* pb/merge-autostash-more:
merge: apply autostash if merge strategy fails
merge: apply autostash if fast-forward fails
Documentation: define 'MERGE_AUTOSTASH'
merge: add missing word "strategy" to a message
Reorganize and update the SubmitingPatches document.
* ab/update-submitting-patches:
SubmittingPatches: replace discussion of Travis with GitHub Actions
SubmittingPatches: move discussion of Signed-off-by above "send"
In the preceding commits we introduced new documentation that talks
about "[commit|object] prerequsite(s)", but also faithfully moved
around existing documentation that talks about the "basis".
Let's change both that moved-around documentation and other existing
documentation in the file to consistently use "[commit|object]"
prerequisite(s)" instead of talking about "basis". The mention of
"basis" isn't wrong, but readers will be helped by us using only one
term throughout the document for this concept.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite the "DESCRIPTION" section for "git bundle" to start by talking
about what bundles are in general terms, rather than diving directly
into one example of what they might be used for.
This changes documentation that's been substantially the same ever
since the command was added in 2e0afafebd (Add git-bundle: move
objects and references by archive, 2007-02-22).
I've split up the DESCRIPTION into that section and a "BUNDLE FORMAT"
section, it briefly discusses the format, but then links to the
technical/bundle-format.txt documentation.
The "the user must specify a basis" part of this is discussed below in
"SPECIFYING REFERENCES", and will be further elaborated on in a
subsequent commit. So I'm removing that part and letting the mention
of "revision exclusions" suffice.
There was a discussion about whether to say anything at all about
"thin packs" here[1]. I think it's good to mention it for the curious
reader willing to read the technical docs, but let's explicitly say
that there's no "thick pack", and that the difference shouldn't
matter.
1. http://lore.kernel.org/git/xmqqk0mbt5rj.fsf@gitster.g
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elaborate on the restriction that you cannot provide a revision that
doesn't resolve to a reference in the "SPECIFYING REFERENCES" section
with examples.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split out the discussion bout "object prerequisites" into its own
section, and add some more examples of the common cases.
See 2e0afafebd (Add git-bundle: move objects and references by
archive, 2007-02-22) for the introduction of the documentation being
changed here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation around GIT_CONFIG has been updated.
* jk/config-env-doc:
doc/git-config: simplify "override" advice for FILES section
doc/git-config: clarify GIT_CONFIG environment variable
doc/git-config: explain --file instead of referring to GIT_CONFIG
Three hyphens are rendered verbatim, so "--" has to be used to produce a
dash. There is no double arrow ("<->" is rendered as "<→"), so a left
and right arrow "<-->" have to be combined for that.
So fix asciidoc output for special characters. This is similar to fixes
in commit de82095a95 (doc hash-function-transition: fix asciidoc output,
2021-02-05).
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation on "git diff -l<n>" and diff.renameLimit have been
updated, and the defaults for these limits have been raised.
* en/rename-limits-doc:
rename: bump limit defaults yet again
diffcore-rename: treat a rename_limit of 0 as unlimited
doc: clarify documentation for rename/copy limits
diff: correct warning message when renameLimit exceeded
A guideline for gender neutral documentation has been added.
* ds/gender-neutral-doc-guidelines:
CodingGuidelines: recommend gender-neutral description
"git worktree add --lock" learned to record why the worktree is
locked with a custom message.
* sm/worktree-add-lock:
worktree: teach `add` to accept --reason <string> with --lock
worktree: mark lock strings with `_()` for translation
t2400: clean up '"add" worktree with lock' test
Ever since Git learned to detect its install location at runtime, there
was the slightly awkward problem that it was impossible to specify paths
relative to said location.
For example, if a version of Git was shipped with custom SSL
certificates to use, there was no portable way to specify
`http.sslCAInfo`.
In Git for Windows, the problem was "solved" for years by interpreting
paths starting with a slash as relative to the runtime prefix.
However, this is not correct: such paths _are_ legal on Windows, and
they are interpreted as absolute paths in the same drive as the current
directory.
After a lengthy discussion, and an even lengthier time to mull over the
problem and its best solution, and then more discussions, we eventually
decided to introduce support for the magic sequence `%(prefix)/`. If a
path starts with this, the remainder is interpreted as relative to the
detected (runtime) prefix. If built without runtime prefix support, Git
will simply interpolate the compiled-in prefix.
If a user _wants_ to specify a path starting with the magic sequence,
they can prefix the magic sequence with `./` and voilà, the path won't
be expanded.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the perl language can handle binary data correctly,
add the function perl_quote_buf_with_len(), which can specify
the length of the data and prevent the data from being truncated
at '\0' to help `--format="%(raw)"` support `--perl`.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new formatting option `%(raw)`, which will print the raw
object data without any changes. It will help further to migrate
all cat-file formatting logic from cat-file to ref-filter.
The raw data of blob, tree objects may contain '\0', but most of
the logic in `ref-filter` depends on the output of the atom being
text (specifically, no embedded NULs in it).
E.g. `quote_formatting()` use `strbuf_addstr()` or `*._quote_buf()`
add the data to the buffer. The raw data of a tree object is
`100644 one\0...`, only the `100644 one` will be added to the buffer,
which is incorrect.
Therefore, we need to find a way to record the length of the
atom_value's member `s`. Although strbuf can already record the
string and its length, if we want to replace the type of atom_value's
member `s` with strbuf, many places in ref-filter that are filled
with dynamically allocated mermory in `v->s` are not easy to replace.
At the same time, we need to check if `v->s == NULL` in
populate_value(), and strbuf cannot easily distinguish NULL and empty
strings, but c-style "const char *" can do it. So add a new member in
`struct atom_value`: `s_size`, which can record raw object size, it
can help us add raw object data to the buffer or compare two buffers
which contain raw object data.
Note that `--format=%(raw)` cannot be used with `--python`, `--shell`,
`--tcl`, and `--perl` because if the binary raw data is passed to a
variable in such languages, these may not support arbitrary binary data
in their string variable type.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Helped-by: Bagas Sanjaya <bagasdotme@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Felipe Contreras <felipe.contreras@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Based-on-patch-by: Olga Telezhnaya <olyatelezhnaya@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git merge --abort' and 'git merge --quit' both
mention the special ref 'MERGE_AUTOSTASH', but this ref is not formally
defined anywhere. Mention it in the description of the '--autostash'
option for 'git merge'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to tell who invoked Git - was it invoked manually by a
user via CLI or script? By an IDE? In some cases - like 'repo' tool -
we can influence the source code and set the GIT_TRACE2_PARENT_SID
environment variable from the caller process. In 'repo''s case, that
parent SID is manipulated to include the string "repo", which means we
can positively identify when Git was invoked by 'repo' tool. However,
identifying parents that way requires both that we know which tools
invoke Git and that we have the ability to modify the source code of
those tools. It cannot scale to keep up with the various IDEs and
wrappers which use Git, most of which we don't know about. Learning
which tools and wrappers invoke Git, and how, would give us insight to
decide where to improve Git's usability and performance.
Unfortunately, there's no cross-platform reliable way to gather the name
of the parent process. If procfs is present, we can use that; otherwise
we will need to discover the name another way. However, the process ID
should be sufficient to look up the process name on most platforms, so
that code may be shareable.
Git for Windows gathers similar information and logs it as a "data_json"
event. However, since "data_json" has a variable format, it is difficult
to parse effectively in some languages; instead, let's pursue a
dedicated "cmd_ancestry" event to record information about the ancestry
of the current process and a consistent, parseable way.
Git for Windows also gathers information about more than one generation
of parent. In Linux further ancestry info can be gathered with procfs,
but it's unwieldy to do so. In the interest of later moving Git for
Windows ancestry logging to the 'cmd_ancestry' event, and in the
interest of later adding more ancestry to the Linux implementation - or
of adding this functionality to other platforms which have an easier
time walking the process tree - let's make 'cmd_ancestry' accept an
array of parentage.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list" learns to omit the "commit <object-name>" header
lines from the output with the `--no-commit-header` option.
* bc/rev-list-without-commit-line:
rev-list: add option for --pretty=format without header
"git send-email" optimization.
* ab/send-email-optim:
perl: nano-optimize by replacing Cwd::cwd() with Cwd::getcwd()
send-email: move trivial config handling to Perl
perl: lazily load some common Git.pm setup code
send-email: lazily load modules for a big speedup
send-email: get rid of indirect object syntax
send-email: use function syntax instead of barewords
send-email: lazily shell out to "git var"
send-email: lazily load config for a big speedup
send-email: copy "config_regxp" into git-send-email.perl
send-email: refactor sendemail.smtpencryption config parsing
send-email: remove non-working support for "sendemail.smtpssl"
send-email tests: test for boolean variables without a value
send-email tests: support GIT_TEST_PERL_FATAL_WARNINGS=true
Replace the discussion of Travis CI added in
0e5d028a7a (Documentation: add setup instructions for Travis CI,
2016-05-02) with something that covers the GitHub Actions added in
889cacb689 (ci: configure GitHub Actions for CI/PR, 2020-04-11).
The setup is trivial compared to using Travis, and it even works on
Windows (that "hopefully soon" comment was probably out-of-date on
Travis as well).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the section discussing the addition of a SOB trailer above the
section that discusses generating the patch itself. This makes sense
as we don't want someone to go through the process of "git
format-patch", only to realize late that they should have used "git
commit -s" or equivalent.
This is a move-only change, no lines here are being altered, only
moved around.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-pull.txt includes merge-options.txt, which is written assuming
merges will happen. git-pull has allowed rebases for many years; update
the documentation to reflect that.
While at it, pass any `--signoff` flag through to the rebase backend too
so that we don't have to document it as merge-specific. Rebase has
supported the --signoff flag for years now as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have for some time shown a long warning when the user does not
specify how to reconcile divergent branches with git pull. Make it an
error now.
Initial-patch-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase=false" means we merge their history into ours, but
it has been described the other way around.
Cc: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: updated the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The doc for 'submodule.recurse' starts with "Specifies if commands
recurse into submodles by default". This is not exactly true of all
commands that have a '--recurse-submodules' option. For example, 'git
pull --recurse-submodules' does not run 'git pull' in each submodule,
but rather runs 'git submodule update --recursive' so that the submodule
working trees after the pull matches the commits recorded in the
superproject.
Clarify that by just saying that it enables '--recurse-submodules'.
Note that the way this setting interacts with 'fetch.recurseSubmodules'
and 'push.recurseSubmodules', which can have other values than true or
false, is already documented since 4da9e99e6e (doc: be more precise on
(fetch|push).recurseSubmodules, 2020-04-06).
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of the FILES section, we indicate that you can override the
regular lookup rules with --global, etc. But:
- we're missing the --local option
- we point to GIT_CONFIG instead of --file, but the latter has much
better documentation
- we're vague about how the overrides work; the actual option
descriptions are much better here
So let's just mention the names and point people back to the OPTIONS
section. We could perhaps even delete this paragraph entirely, but the
presence of the names may give people reading FILES a clue about where
to look for more information.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scope and utility of the GIT_CONFIG variable was drastically reduced
by dc87183189 (Only use GIT_CONFIG in "git config", not other programs,
2008-06-30). But the documentation in git-config(1) predates that, which
makes it rather misleading.
These days it is really just another way to say "--file". So let's say
that, and explicitly make it clear that it does not impact other Git
commands (like GIT_CONFIG_SYSTEM, etc, would).
I also bumped it to the bottom of the list of variables, and warned
people off of using it. We don't have any plans for deprecation at this
point, but there's little point in encouraging people to use it by
putting it at the top of the list.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The explanation for the --file option only refers to GIT_CONFIG. This
redirection to an environment variable is confusing, but doubly so
because the description of GIT_CONFIG is out of date.
Let's describe --file from scratch, detailing both the reading and
writing behavior as we do for other similar options like --system, etc.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation not to assume users are of certain gender
and adds to guidelines to do so.
* ds/gender-neutral-doc:
*: fix typos
comments: avoid using the gender of our users
doc: avoid using the gender of other people
Code recently added to support common ancestry negotiation during
"git push" did not sanity check its arguments carefully enough.
* ab/fetch-negotiate-segv-fix:
fetch: fix segfault in --negotiate-only without --negotiation-tip=*
fetch: document the --negotiate-only option
send-pack.c: move "no refs in common" abort earlier
Technical writing seeks to convey information with minimal
friction. One way that a reader can experience friction is if they
encounter a description of "a user" that is later simplified using a
gendered pronoun. If the reader does not consider that pronoun to
apply to them, then they can experience cognitive dissonance that
removes focus from the information.
Give some basic tips to guide us avoid unnecessary uses of gendered
description.
Using a gendered pronoun is appropriate when referring to a specific
person.
There are acceptable existing uses of gendered pronouns within the
Git codebase, such as:
* References to real people (e.g. Linus Torvalds, "the Git maintainer").
Do not misgender real people. If there is any doubt to the gender of a
person, then avoid using pronouns.
* References to fictional people with clear genders (e.g. Alice and
Bob).
* Sample text used in test cases (e.g t3702, t6432).
* The official text of the GPL license contains uses of "he or she",
but using singular "they" (or modifying the text in some other
way) is not within the scope of the Git project.
* Literal email messages in Documentation/howto/ should not be edited
for grammatical concerns such as this, unless we update the entire
document to fit the standard documentation format. If such an effort is
taken on, then the authorship would change and no longer refer to the
exact mail message.
* External projects consumed in contrib/ should not deviate solely for
style reasons. Recommended edits should be contributed to those
projects directly.
Other cases within the Git project were cleaned up by the previous
changes.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were last bumped in commit 92c57e5c1d (bump rename limit
defaults (again), 2011-02-19), and were bumped both because processors
had gotten faster, and because people were getting ugly merges that
caused problems and reporting it to the mailing list (suggesting that
folks were willing to spend more time waiting).
Since that time:
* Linus has continued recommending kernel folks to set
diff.renameLimit=0 (maps to 32767, currently)
* Folks with repositories with lots of renames were happy to set
merge.renameLimit above 32767, once the code supported that, to
get correct cherry-picks
* Processors have gotten faster
* It has been discovered that the timing methodology used last time
probably used too large example files.
The last point is probably worth explaining a bit more:
* The "average" file size used appears to have been average blob size
in the linux kernel history at the time (probably v2.6.25 or
something close to it).
* Since bigger files are modified more frequently, such a computation
weights towards larger files.
* Larger files may be more likely to be modified over time, but are
not more likely to be renamed -- the mean and median blob size
within a tree are a bit higher than the mean and median of blob
sizes in the history leading up to that version for the linux
kernel.
* The mean blob size in v2.6.25 was half the average blob size in
history leading to that point
* The median blob size in v2.6.25 was about 40% of the mean blob size
in v2.6.25.
* Since the mean blob size is more than double the median blob size,
any file as big as the mean will not be compared to any files of
median size or less (because they'd be more than 50% dissimilar).
* Since it is the number of files compared that provides the O(n^2)
behavior, median-sized files should matter more than mean-sized
ones.
The combined effect of the above is that the file size used in past
calculations was likely about 5x too large. Combine that with a CPU
performance improvement of ~30%, and we can increase the limits by
a factor of sqrt(5/(1-.3)) = 2.67, while keeping the original stated
time limits.
Keeping the same approximate time limit probably makes sense for
diff.renameLimit (there is no progress feedback in e.g. git log -p),
but the experience above suggests merge.renameLimit could be extended
significantly. In fact, it probably would make sense to have an
unlimited default setting for merge.renameLimit, but that would
likely need to be coupled with changes to how progress is displayed.
(See https://lore.kernel.org/git/YOx+Ok%2FEYvLqRMzJ@coredump.intra.peff.net/
for details in that area.) For now, let's just bump the approximate
time limit from 10s to 1m.
(Note: We do not want to use actual time limits, because getting results
that depend on how loaded your system is that day feels bad, and because
we don't discover that we won't get all the renames until after we've
put in a lot of work rather than just upfront telling the user there are
too many files involved.)
Using the original time limit of 2s for diff.renameLimit, and bumping
merge.renameLimit from 10s to 60s, I found the following timings using
the simple script at the end of this commit message (on an AWS c5.xlarge
which reports as "Intel(R) Xeon(R) Platinum 8124M CPU @ 3.00GHz"):
N Timing
1300 1.995s
7100 59.973s
So let's round down to nice even numbers and bump the limits from
400->1000, and from 1000->7000.
Here is the measure_rename_perf script (adapted from
https://lore.kernel.org/git/20080211113516.GB6344@coredump.intra.peff.net/
in particular to avoid triggering the linear handling from
basename-guided rename detection):
#!/bin/bash
n=$1; shift
rm -rf repo
mkdir repo && cd repo
git init -q -b main
mkdata() {
mkdir $1
for i in `seq 1 $2`; do
(sed "s/^/$i /" <../sample
echo tag: $1
) >$1/$i
done
}
mkdata initial $n
git add .
git commit -q -m initial
mkdata new $n
git add .
cd new
for i in *; do git mv $i $i.renamed; done
cd ..
git rm -q -rf initial
git commit -q -m new
time git diff-tree -M -l0 --summary HEAD^ HEAD
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 89973554b5 (diffcore-rename: make diff-tree -l0 mean
-l<large>, 2017-11-29), -l0 was given a special magical "large" value,
but one which was not large enough for some uses (as can be seen from
commit 9f7e4bfa3b (diff: remove silent clamp of renameLimit,
2017-11-13). Make 0 (or a negative value) be treated as unlimited
instead and update the documentation to mention this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few places in the docs implied that rename/copy detection is always
quadratic or that all (unpaired) files were involved in the quadratic
portion of rename/copy detection. The following two commits each
introduced an exception to this:
9027f53cb5 (Do linear-time/space rename logic for exact renames,
2007-10-25)
bd24aa2f97 (diffcore-rename: guide inexact rename detection based
on basenames, 2021-02-14)
(As a side note, for copy detection, the basename guided inexact rename
detection is turned off and the exact renames will only result in
sources (without the dests) being removed from the set of files used in
quadratic detection. So, for copy detection, the documentation was
closer to correct.)
Avoid implying that all files involved in rename/copy detection are
subject to the full quadratic algorithm. While at it, also note the
default values for all these settings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default reason stored in the lock file, "added with --lock",
is unlikely to be what the user would have given in a separate
`git worktree lock` command. Allowing `--reason` to be specified
along with `--lock` when adding a working tree gives the user control
over the reason for locking without needing a second command.
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git diff --merge-base` was introduced at around Git 2.30, the
documentation included a few errors.
In the example given for `git diff --cached --merge-base`, the
`--cached` flag was omitted for the `--merge-base` example. Add the
missing flag.
In the `git diff <commit>` case, we failed to mention that
`--merge-base` is an available option. Give the usage of `--merge-base`
as an option there.
Finally, there are two errors in the usage of `git diff`. Firstly, we do
not mention `--merge-base` in the `git diff --cached` case. Mention it
so that it's consistent with the documentation. Secondly, we put the
`[--merge-base]` in between `<commit>` and `[<commit>...]`. Move the
`[--merge-base]` so that it's beside `[<options>]` which is a more
logical grouping.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, we encourage users to use plumbing commands, like git
rev-list, over porcelain commands, like git log, when scripting.
However, git rev-list has one glaring problem that prevents it from
being used in certain cases: when --pretty is used with a custom format,
it always prints out a line containing "commit" and the object ID. This
makes it unsuitable for many scripting needs, and forces users to use
git log instead.
While we can't change this behavior for backwards compatibility, we can
add an option to suppress this behavior, so let's do so, and call it
"--no-commit-header". Additionally, add the corresponding positive
option to switch it back on.
Note that this option doesn't affect the built-in formats, only custom
formats. This is exactly the same behavior as users already have from
git log and is what most users will be used to.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation reads as if .gitignore files will be parsed in
every parent directory, and not until they reach a repository boundary.
This clarifies the current behaviour.
As well, this corrects 'toplevel' to 'top-level', matching usage for
'top-level domain'.
Signed-off-by: Andrew Berry <andrew@furrypaws.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no documentation for the --negotiate-only option added in
9c1e657a8f (fetch: teach independent negotiation (no packfile),
2021-05-04), only documentation for the related push.negotiation
option added in the following commit in 477673d6f3 (send-pack:
support push negotiation, 2021-05-04).
Let's document it, and update the cross-linking I'd added between
--negotiation-tip=* and 'fetch.negotiationAlgorithm' in
526608284a (fetch doc: cross-link two new negotiation options,
2018-08-01).
I think it would be better to say "in common with the remote" here
than "...the server", but the documentation for --negotiation-tip=*
above this talks about "the server", so let's continue doing that in
this related option. See 3390e42adb (fetch-pack: support negotiation
tip whitelist, 2018-07-02) for that documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typofix (chose -> choose) in the documentation of the patch option
under the commit command.
Signed-off-by: Beshr Kayali <me@beshr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As can be seen in files "Documentation/blame-options.txt" and
"builtin/blame.c", the name of this configuration option is
"blame.markUnblamableLines".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using gendered pronouns for an anonymous person applies a gender where
none is known and further excludes readers who do not use gendered
pronouns. Avoid such examples in the documentation by using "they" or
passive voice to avoid the need for a pronoun.
Inspired-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-m" option in "git log -m" that does not specify which format,
if any, of diff is desired did not have any visible effect; it now
implies some form of diff (by default "--patch") is produced.
* so/log-m-implies-p:
diff-merges: let "-m" imply "-p"
diff-merges: rename "combined_imply_patch" to "merges_imply_patch"
stash list: stop passing "-m" to "git log"
git-svn: stop passing "-m" to "git rev-list"
diff-merges: move specific diff-index "-m" handling to diff-index
t4013: test "git diff-index -m"
t4013: test "git diff-tree -m"
t4013: test "git log -m --stat"
t4013: test "git log -m --raw"
t4013: test that "-m" alone has no effect in "git log"
Optimize out repeated rename detection in a sequence of mergy
operations.
* en/ort-perf-batch-11:
merge-ort, diffcore-rename: employ cached renames when possible
merge-ort: handle interactions of caching and rename/rename(1to1) cases
merge-ort: add helper functions for using cached renames
merge-ort: preserve cached renames for the appropriate side
merge-ort: avoid accidental API mis-use
merge-ort: add code to check for whether cached renames can be reused
merge-ort: populate caches of rename detection results
merge-ort: add data structures for in-memory caching of rename detection
t6429: testcases for remembering renames
fast-rebase: write conflict state to working tree, index, and HEAD
fast-rebase: change assert() to BUG()
Documentation/technical: describe remembering renames optimization
t6423: rename file within directory that other side renamed
"git send-email" learned the "--sendmail-cmd" command line option
and the "sendemail.sendmailCmd" configuration variable, which is a
more sensible approach than the current way of repurposing the
"smtp-server" that is meant to name the server to instead name the
command to talk to the server.
* ga/send-email-sendmail-cmd:
git-send-email: add option to specify sendmail command
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "fast-forward" in the glossary has been updated.
* ry/clarify-fast-forward-in-glossary:
docs: improve fast-forward in glossary content
Many of the regulars on #git-devel are now on Libera Chat, to the extent
that the community page now lists it as the IRC Channel[1]. This will
help new contributors find the right place, if they choose to ask
questions on `#git-devel`.
Relevant discussion on the IRC transition:
https://lore.kernel.org/git/CAJoAoZ=e62sceNpcR5L5zjsj177uczTnXjcAg+BbOoOkeH8vXQ@mail.gmail.com/
[1] https://git-scm.com/community
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is almost never a good idea, as the resulting repository is
larger and slower (see the new explanations in the docs).
I outlined the potential problems. We could go further and make the
option harder to find (or at least, make the command-line option
descriptions a much more terse "you probably don't want this; see
pack.packsizeLimit for details"). But this seems like a minimal change
that may prevent people from thinking it's more useful than it is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a01f7f2ba0 (merge: enable defaulttoupstream by default,
2014-04-20) forgot to mention the new default in the configuration
documentation.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There're two different default options for log --decorate:
* Should `--decorate` be given without any arguments, it's default to
`short`
* Should neither `--decorate` nor `--no-decorate` be given, it's default
to the `log.decorate` or `auto`.
We documented the former, but not the latter.
Let's document them, too.
Reported-by: Andy AO <zen96285@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 87db61a (trace2: write discard message to sentinel files,
2019-10-04), we added a new "too_many_files" event for when trace2
logging would create too many files in an output directory.
Unfortunately, the api-trace2 doc described a "discard" event instead.
Fix the doc to use the correct event name.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-repack doc clearly states that it *does* operate on promisor
packfiles (in a separate partition), with "-a" specified. Presumably
the statements here are outdated, as they feature from the first doc
in 2017 (and the repack support was added in 2018)
Signed-off-by: Tao Klerks <tao@klerks.biz>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the code has been simplified and it's clear what it's
actually doing, update the documentation to reflect that.
Namely; the simple mode only barfs when working on a centralized
workflow, and there's no configured upstream branch with the same name.
Cc: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the already dead code to support "sendemail.smtpssl" by finally
removing the dead code supporting the configuration option.
In f6bebd121a (git-send-email: add support for TLS via
Net::SMTP::SSL, 2008-06-25) the --smtp-ssl command-line option was
documented as deprecated, later in 65180c6618 (List send-email config
options in config.txt., 2009-07-22) the "sendemail.smtpssl"
configuration option was also documented as such.
Then in in 3ff15040e2 (send-email: fix regression in
sendemail.identity parsing, 2019-05-17) I unintentionally removed
support for it by introducing a bug in read_config().
As can be seen from the diff context we've already returned unless
$enc i defined, so it's not possible for us to reach the "elsif"
branch here. This code was therefore already dead since Git v2.23.0.
So let's just remove it. We were already 11 years into a stated
deprecation period of this variable when 3ff15040e2 landed, now it's
around 13. Since it hasn't worked anyway for around 2 years it looks
like we can safely remove it.
The --smtp-ssl option is still deprecated, if someone cares they can
follow-up and remove that too, but unlike the config option that one
could still be in use in the wild. I'm just removing this code that's
provably unused already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the 'uploadpack.blobPackfileUri' description in packfile-uri.txt
and the correct format also can be seen in t5702.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently GNU make already removes files when catching an interruption
signal, however, in order to deal with other kinds of errors a
workaround is in place to store target output to a temporary file, and
only move it to its right place on success.
By enabling the built-in .DELETE_ON_ERROR we let make do this task, so
we don't have to.
This way the rules can be simplified a lot.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits 50cff52f1a (When generating manpages, delete outdated targets
first., 2007-08-02) and f9286765b2 (Documentation/Makefile: remove
cmd-list.made before redirecting to it., 2007-08-06) created these rm
instances for a very rare corner-case: building as root by mistake.
It's odd to have workarounds here, but nowhere else in the Makefile--
which already fails in this stuation, starting from
Documentation/technical/.
We gain nothing but complexity, so let's remove them.
Comments-by: Jeff King <peff@peff.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
asciidoc needs asciidoc.conf, asciidoctor asciidoctor-extensions.rb.
Neither needs the other.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another brown paper bag inconsistency fix for a new feature
introduced during this cycle.
* dl/stash-show-untracked-fixup:
stash show: use stash.showIncludeUntracked even when diff options given
If options pertaining to how the diff is displayed is provided to
`git stash show`, the command will ignore the stash.showIncludeUntracked
configuration variable, defaulting to not showing any untracked files.
This is unintuitive behaviour since the format of the diff output and
whether or not to display untracked files are orthogonal.
Use stash.showIncludeUntracked even when diff options are given. Of
course, this is still overridable via the command-line options.
Update the documentation to explicitly say which configuration variables
will be overridden when a diff options are given.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix long standing inconsistency between -c/--cc that do imply -p on
one side, and -m that did not imply -p on the other side.
Change corresponding test accordingly, as "log -m" output should now
match one from "log -m -p", rather than from just "log".
Change documentation accordingly.
NOTES:
After this patch
git log -m
produces diffs without need to provide -p as well, that improves both
consistency and usability. It gets even more useful if one sets
"log.diffMerges" configuration variable to "first-parent" to force -m
produce usual diff with respect to first parent only.
This patch, however, does not change behavior when specific diff
format is explicitly provided on the command-line, so that commands
like
git log -m --raw
git log -m --stat
are not affected, nor does it change commands where specific diff
format is active by default, such as:
git diff-tree -m
It's also worth to be noticed that exact historical semantics of -m is
still provided by --diff-merges=separate.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regression fix for a change made during this cycle.
* cs/http-use-basic-after-failed-negotiate:
Revert "remote-curl: fall back to basic auth if Negotiate fails"
t5551: test http interaction with credential helpers
We will soon be adding an optimization that caches (in memory only,
never written to disk) upstream renames during a sequence of merges such
as occurs during a cherry-pick or rebase operation. Add several tests
meant to stress such an implementation to ensure it does the right
thing, and include a test whose outcome we will later change due to this
optimization as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remembering renames on the upstream side of history in an early merge of
a rebase or cherry-pick for re-use in a latter merge of the same
operation makes pretty good intuitive sense. However, trying to show
that it doesn't cause some subtle behavioral difference or some funny
edge or corner case is much more involved. And, in fact, it does
introduce a subtle behavioral change.
Document all the assumptions, special cases, and logic involved in such
an optimization, and describe why this optimization is safe under the
current optimizations/features/etc. -- even when the subtle behavioral
change is triggered.
Part of the point of adding this document that goes over the
optimization in such laborious detail, is that it is possible that
significant future changes (optimizations or feature changes) could
interact with this optimization in interesting ways; this document is
here to help folks making big changes sanity check that the assumptions
and arguments underlying this optimization are still valid. (As a side
note, creating this document forced me to review things in sufficient
detail that I found I was not properly caching directory-rename-induced
renames, resulting in the code not being aware of those renames and
causing unnecessary diffcore_rename_extended() calls in subsequent
merges.)
A subsequent commit will add several testcases based on this document
meant to stress-test the implementation and also document the case with
the subtle behavioral change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation for color.pager is technically correct, but
slightly misleading and doesn't really clarify the purpose of the
variable. As explained in the original thread which added it:
https://lore.kernel.org/git/E1G6zPH-00062L-Je@moooo.ath.cx/
the point is to deal with pagers that don't understand colors. And hence it
being set to "true" is necessary for colorizing output to the pager, but
not sufficient by itself (you must also have enabled one of the other
color options, though note that these are set to "auto" by default these
days).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text was somewhat confusing between the revision itself and the author.
Signed-off-by: Reuven Yagel <robi@post.jce.ac.il>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes new people are confused by how a revision "range" works,
in that it is not a random collection of commits but a set of
commits that are all connected to each other, and most Git commands
work on a single such "range".
Give an example to clarify it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the default length used for the abbreviated form used for
commits in git describe.
The behavior was modified in Git 2.11.0, but the documentation was not
updated to clarify the new behavior.
Signed-off-by: Anders Höckersten <anders@hockersten.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sendemail.smtpServer configuration option and --smtp-server command
line option both support using a sendmail-like program to send emails by
specifying an absolute file path. However, this is not ideal for the
following reasons:
1. It overloads the meaning of smtpServer (now a program is being used
for the server?)
2. It doesn't allow for non-absolute paths, arguments, or arbitrary
scripting
Requiring an absolute path is bad for portability, as the same program
may be in different locations on different systems. If a user wishes to
pass arguments to their program, they have to use the smtpServerOption
option, which is cumbersome (as it must be repeated for each option) and
doesn't adhere to normal git conventions.
Introduce a new configuration option sendemail.sendmailCmd as well as a
command line option --sendmail-cmd that can be used to specify a command
(with or without arguments) or shell expression to run to send email.
The name of this option is consistent with --to-cmd and --cc-cmd. This
invocation honors the user's $PATH so that absolute paths are not
necessary. Arbitrary shell expressions are also supported, allowing
users to do basic scripting.
Give this option a higher precedence over --smtp-server and
sendemail.smtpServer, as the new interface is more flexible. For
backward compatibility, continue to support absolute paths in
--smtp-server and sendemail.smtpServer.
Signed-off-by: Gregory Anders <greg@gpanders.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mailinfo" (hence "git am") learned the "--quoted-cr" option to
control how lines ending with CRLF wrapped in base64 or qp are
handled.
* dd/mailinfo-quoted-cr:
am: learn to process quoted lines that ends with CRLF
mailinfo: allow stripping quoted CR without warning
mailinfo: allow squelching quoted CRLF warning
mailinfo: warn if CRLF found in decoded base64/QP email
mailinfo: stop parsing options manually
mailinfo: load default metainfo_charset lazily
"git push" learns to discover common ancestor with the receiving
end over protocol v2.
* jt/push-negotiation:
send-pack: support push negotiation
fetch: teach independent negotiation (no packfile)
fetch-pack: refactor command and capability write
fetch-pack: refactor add_haves()
fetch-pack: refactor process_acks()
Over-the-wire protocol learns a new request type to ask for object
sizes given a list of object names.
* ba/object-info:
object-info: support for retrieving object info
The way the command line specified by the trailer.<token>.command
configuration variable receives the end-user supplied value was
both error prone and misleading. An alternative to achieve the
same goal in a safer and more intuitive way has been added, as
the trailer.<token>.cmd configuration variable, to replace it.
* zh/trailer-cmd:
trailer: add new .cmd config option
docs: correct descript of trailer.<token>.command
Various test and documentation updates about .gitsomething paths
that are symlinks.
* jk/symlinked-dotgitx-cleanup:
docs: document symlink restrictions for dot-files
fsck: warn about symlinked dotfiles we'll open with O_NOFOLLOW
t0060: test ntfs/hfs-obscured dotfiles
t7450: test .gitmodules symlink matching against obscured names
t7450: test verify_path() handling of gitmodules
t7415: rename to expand scope
fsck_tree(): wrap some long lines
fsck_tree(): fix shadowed variable
t7415: remove out-dated comment about translation
In previous changes, mailinfo has learnt to process lines that decoded
from base64 or quoted-printable, and ends with CRLF.
Let's teach "am" that new trick, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous changes, we've turned on warning for quoted CR in base64 or
quoted-printable email messages. Some projects see those quoted CR a lot,
they know that it happens most of the time, and they find it's desirable
to always strip those CR.
Those projects in question usually fall back to use other tools to handle
patches when receive such patches.
Let's help those projects handle those patches by stripping those
excessive CR.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous change, Git starts to warn for quoted CRLF in decoded
base64/QP email. Despite those warnings are usually helpful,
quoted CRLF could be part of some users' workflow.
Let's give them an option to turn off the warning completely.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "%ch" is missing a space after "human style", before
the parenthetical remark. This description was introduced in b722d4560e
("pretty: provide human date format", 2021-04-25). That commit also
added "%ah", which does have the space already.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the ")" at the end of this paragraph. There's a parenthetical
remark in this paragraph, but it's been closed on the line above.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list" learns the "--filter=object:type=<type>" option,
which can be used to exclude objects of the given kind from the
packfile generated by pack-objects.
* ps/rev-list-object-type-filter:
rev-list: allow filtering of provided items
pack-bitmap: implement combined filter
pack-bitmap: implement object type filter
list-objects: implement object type filter
list-objects: support filtering by tag and commit
list-objects: move tag processing into its own function
revision: mark commit parents as NOT_USER_GIVEN
uploadpack.txt: document implication of `uploadpackfilter.allow`
"git rebase --[no-]reschedule-failed-exec" did not work well with
its configuration variable, which has been corrected.
* ab/rebase-no-reschedule-failed-exec:
rebase: don't override --no-reschedule-failed-exec with config
rebase tests: camel-case rebase.rescheduleFailedExec consistently
Dev support.
* ab/doc-lint:
docs: fix linting issues due to incorrect relative section order
doc lint: lint relative section order
doc lint: lint and fix missing "GIT" end sections
doc lint: fix bugs in, simplify and improve lint script
doc lint: Perl "strict" and "warnings" in lint-gitlink.perl
Documentation/Makefile: make doc.dep dependencies a variable again
Documentation/Makefile: make $(wildcard howto/*.txt) a var
"git add" and "git rm" learned not to touch those paths that are
outside of sparse checkout.
* mt/add-rm-in-sparse-checkout:
rm: honor sparse checkout patterns
add: warn when asked to update SKIP_WORKTREE entries
refresh_index(): add flag to ignore SKIP_WORKTREE entries
pathspec: allow to ignore SKIP_WORKTREE entries on index matching
add: make --chmod and --renormalize honor sparse checkouts
t3705: add tests for `git add` in sparse checkouts
add: include magic part of pathspec on --refresh error
Replace GIT_CONFIG_NOSYSTEM mechanism to decline from reading the
system-wide configuration file with GIT_CONFIG_SYSTEM that lets
users specify from which file to read the system-wide configuration
(setting it to an empty file would essentially be the same as
setting NOSYSTEM), and introduce GIT_CONFIG_GLOBAL to override the
per-user configuration in $HOME/.gitconfig.
* ps/config-global-override:
t1300: fix unset of GIT_CONFIG_NOSYSTEM leaking into subsequent tests
config: allow overriding of global and system configuration
config: unify code paths to get global config paths
config: rename `git_etc_config()`
"git log --format=..." placeholders learned %ah/%ch placeholders to
request the --date=human output.
* zh/pretty-date-human:
pretty: provide human date format
"git --config-env var=val cmd" weren't accepted (only
--config-env=var=val was).
* ps/config-env-option-with-separate-value:
git: support separate arg for `--config-env`'s value
git.txt: fix synopsis of `--config-env` missing the equals sign
Currently, the packfile negotiation step within a Git fetch cannot be
done independent of sending the packfile, even though there is at least
one application wherein this is useful. Therefore, make it possible for
this negotiation step to be done independently. A subsequent commit will
use this for one such application - push negotiation.
This feature is for protocol v2 only. (An implementation for protocol v0
would require a separate implementation in the fetch, transport, and
transport helper code.)
In the protocol, the main hindrance towards independent negotiation is
that the server can unilaterally decide to send the packfile. This is
solved by a "wait-for-done" argument: the server will then wait for the
client to say "done". In practice, the client will never say it; instead
it will cease requests once it is satisfied.
In the client, the main change lies in the transport and transport
helper code. fetch_refs_via_pack() performs everything needed - protocol
version and capability checks, and the negotiation itself.
There are 2 code paths that do not go through fetch_refs_via_pack() that
needed to be individually excluded: the bundle transport (excluded
through requiring smart_options, which the bundle transport doesn't
support) and transport helpers that do not support takeover. If or when
we support independent negotiation for protocol v0, we will need to
modify these 2 code paths to support it. But for now, report failure if
independent negotiation is requested in these cases.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `trailer.<token>.command` configuration variable
specifies a command (run via the shell, so it does not have
to be a single name or path to the command, but can be a
shell script), and the first occurrence of substring $ARG is
replaced with the value given to the `interpret-trailer`
command for the token in a '--trailer <token>=<value>' argument.
This has three downsides:
* The use of $ARG in the mechanism misleads the users that
the value is passed in the shell variable, and tempt them
to use $ARG more than once, but that would not work, as
the second and subsequent $ARG are not replaced.
* Because $ARG is textually replaced without regard to the
shell language syntax, even '$ARG' (inside a single-quote
pair), which a user would expect to stay intact, would be
replaced, and worse, if the value had an unmatched single
quote (imagine a name like "O'Connor", substituted into
NAME='$ARG' to make it NAME='O'Connor'), it would result in
a broken command that is not syntactically correct (or
worse).
* The first occurrence of substring `$ARG` will be replaced
with the empty string, in the command when the command is
first called to add a trailer with the specified <token>.
This is a bad design, the nature of automatic execution
causes it to add a trailer that we don't expect.
Introduce a new `trailer.<token>.cmd` configuration that
takes higher precedence to deprecate and eventually remove
`trailer.<token>.command`, which passes the value as an
argument to the command. Instead of "$ARG", users can
refer to the value as positional argument, $1, in their
scripts. At the same time, in order to allow
`git interpret-trailers` to better simulate the behavior
of `git command -s`, 'trailer.<token>.cmd' will not
automatically execute.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original documentation of `trailer.<token>.command`,
some descriptions are easily misunderstood. So let's modify
it to increase its readability.
In addition, clarify that `$ARG` in command can only be
replaced once.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We stopped allowing symlinks for .gitmodules files in 10ecfa7649
(verify_path: disallow symlinks in .gitmodules, 2018-05-04), and we
stopped following symlinks for .gitattributes, .gitignore, and .mailmap
in the commits from 204333b015 (Merge branch 'jk/open-dotgitx-with-nofollow',
2021-03-22). The reasons are discussed in detail there, but we never
adjusted the documentation to let users know.
This hasn't been a big deal since the point is that such setups were
mildly broken and thought to be unusual anyway. But it certainly doesn't
hurt to be clear and explicit about it.
Suggested-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format-patch doesn't have a way to format merges in a way that can be
applied by git-am (or any other tool), and so it just omits them.
However, this may be a surprising implication for users who are not well
versed in how the tool works. Let's add a note to the documentation
making this more clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
01d3a526 (t0000: check whether the shell supports the "local"
keyword, 2017-10-26) raised a test balloon to see if those who build
and test Git use a platform with a shell that lacks support for the
"local" keyword. After two years, 7f0b5908 (t0000: reword comments
for "local" test, 2019-08-08) documented that "local" keyword, even
though is outside POSIX, is allowed in our test scripts.
Let's write it in the CodingGuidelines, too. It might be tempting
to allow it in scripted Porcelains (we have avoided getting them
contaminiated by "local" so far), but they are on their way out and
getting rewritten in C.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that pathnames recorded in Git trees are most often (but
not necessarily) encoded in UTF-8.
* ab/pathname-encoding-doc:
doc: clarify the filename encoding in git diff
The checkout machinery has been taught to perform the actual
write-out of the files in parallel when able.
* mt/parallel-checkout-part-2:
parallel-checkout: add design documentation
parallel-checkout: support progress displaying
parallel-checkout: add configuration options
parallel-checkout: make it truly parallel
unpack-trees: add basic support for parallel checkout
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
The prefetch task in "git maintenance" assumed that "git fetch"
from any remote would fetch all its local branches, which would
fetch too much if the user is interested in only a subset of
branches there.
* ds/maintenance-prefetch-fix:
maintenance: respect remote.*.skipFetchAll
maintenance: use 'git fetch --prefetch'
fetch: add --prefetch option
maintenance: simplify prefetch logic
When executing `git -h`, then the `--config-env` documentation rightly
lists the option as requiring an equals between the option and its
argument: this is the only currently supported format. But the git(1)
manpage incorrectly lists the option as taking a space in between.
Fix the issue by adding the missing space.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-of-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the documentation for generating patch text with diff-related
commands, refer to the documentation for the diff attribute.
This attribute influences the way that patches are generated, but this
was previously not mentioned in e.g., the git-diff manpage.
Signed-off-by: Peter Oliver <git@mavit.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the placeholders %ah and %ch to format author date and committer
date, like --date=human does, which provides more humanity date output.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is useful to get information of an object without having to
download it completely.
Add the "object-info" capability that lets the client ask for
object-related information with their full hexadecimal object names.
Only sizes are returned for now.
Signed-off-by: Bruno Albuquerque <bga@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation updates, with unrelated comment updates, too.
* ab/usage-error-docs:
api docs: document that BUG() emits a trace2 error event
api docs: document BUG() in api-error-handling.txt
usage.c: don't copy/paste the same comment three times
AFAICT parsing the output of `git diff --name-only master...feature`
is the intended way of programmatically getting the list of files
modified
by a feature branch. It is impossible to parse text unless you know what
encoding it is in. The output encoding of diff --name-only and
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to have git run in a fully controlled environment without any
misconfiguration, it may be desirable for users or scripts to override
global- and system-level configuration files. We already have a way of
doing this, which is to unset both HOME and XDG_CONFIG_HOME environment
variables and to set `GIT_CONFIG_NOGLOBAL=true`. This is quite kludgy,
and unsetting the first two variables likely has an impact on other
executables spawned by such a script.
The obvious way to fix this would be to introduce `GIT_CONFIG_NOGLOBAL`
as an equivalent to `GIT_CONFIG_NOSYSTEM`. But in the past, it has
turned out that this design is inflexible: we cannot test system-level
parsing of the git configuration in our test harness because there is no
way to change its location, so all tests run with `GIT_CONFIG_NOSYSTEM`
set.
Instead of doing the same mistake with `GIT_CONFIG_NOGLOBAL`, introduce
two new variables `GIT_CONFIG_GLOBAL` and `GIT_CONFIG_SYSTEM`:
- If unset, git continues to use the usual locations.
- If set to a specific path, we skip reading the normal
configuration files and instead take the path. By setting the path
to `/dev/null`, no configuration will be loaded for the respective
level.
This implements the usecase where we want to execute code in a sanitized
environment without any potential misconfigurations via `/dev/null`, but
is more flexible and allows for more usecases than simply adding
`GIT_CONFIG_NOGLOBAL`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When providing an object filter, it is currently impossible to also
filter provided items. E.g. when executing `git rev-list HEAD` , the
commit this reference points to will be treated as user-provided and is
thus excluded from the filtering mechanism. This makes it harder than
necessary to properly use the new `--filter=object:type` filter given
that even if the user wants to only see blobs, he'll still see commits
of provided references.
Improve this by introducing a new `--filter-provided-objects` option
to the git-rev-parse(1) command. If given, then all user-provided
references will be subject to filtering.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it already is possible to filter objects by some criteria in
git-rev-list(1), it is not yet possible to filter out only a specific
type of objects. This makes some filters less useful. The `blob:limit`
filter for example filters blobs such that only those which are smaller
than the given limit are returned. But it is unfit to ask only for these
smallish blobs, given that git-rev-list(1) will continue to print tags,
commits and trees.
Now that we have the infrastructure in place to also filter tags and
commits, we can improve this situation by implementing a new filter
which selects objects based on their type. Above query can thus
trivially be implemented with the following command:
$ git rev-list --objects --filter=object:type=blob \
--filter=blob:limit=200
Furthermore, this filter allows to optimize for certain other cases: if
for example only tags or commits have been selected, there is no need to
walk down trees.
The new filter is not yet supported in bitmaps. This is going to be
implemented in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make parallel checkout configurable by introducing two new settings:
checkout.workers and checkout.thresholdForParallelism. The first defines
the number of workers (where one means sequential checkout), and the
second defines the minimum number of entries to attempt parallel
checkout.
To decide the default value for checkout.workers, the parallel version
was benchmarked during three operations in the linux repo, with cold
cache: cloning v5.8, checking out v5.8 from v2.6.15 (checkout I) and
checking out v5.8 from v5.7 (checkout II). The four tables below show
the mean run times and standard deviations for 5 runs in: a local file
system on SSD, a local file system on HDD, a Linux NFS server, and
Amazon EFS (all on Linux). Each parallel checkout test was executed with
the number of workers that brings the best overall results in that
environment.
Local SSD:
Sequential 10 workers Speedup
Clone 8.805 s ± 0.043 s 3.564 s ± 0.041 s 2.47 ± 0.03
Checkout I 9.678 s ± 0.057 s 4.486 s ± 0.050 s 2.16 ± 0.03
Checkout II 5.034 s ± 0.072 s 3.021 s ± 0.038 s 1.67 ± 0.03
Local HDD:
Sequential 10 workers Speedup
Clone 32.288 s ± 0.580 s 30.724 s ± 0.522 s 1.05 ± 0.03
Checkout I 54.172 s ± 7.119 s 54.429 s ± 6.738 s 1.00 ± 0.18
Checkout II 40.465 s ± 2.402 s 38.682 s ± 1.365 s 1.05 ± 0.07
Linux NFS server (v4.1, on EBS, single availability zone):
Sequential 32 workers Speedup
Clone 240.368 s ± 6.347 s 57.349 s ± 0.870 s 4.19 ± 0.13
Checkout I 242.862 s ± 2.215 s 58.700 s ± 0.904 s 4.14 ± 0.07
Checkout II 65.751 s ± 1.577 s 23.820 s ± 0.407 s 2.76 ± 0.08
EFS (v4.1, replicated over multiple availability zones):
Sequential 32 workers Speedup
Clone 922.321 s ± 2.274 s 210.453 s ± 3.412 s 4.38 ± 0.07
Checkout I 1011.300 s ± 7.346 s 297.828 s ± 0.964 s 3.40 ± 0.03
Checkout II 294.104 s ± 1.836 s 126.017 s ± 1.190 s 2.33 ± 0.03
The above benchmarks show that parallel checkout is most effective on
repositories located on an SSD or over a distributed file system. For
local file systems on spinning disks, and/or older machines, the
parallelism does not always bring a good performance. For this reason,
the default value for checkout.workers is one, a.k.a. sequential
checkout.
To decide the default value for checkout.thresholdForParallelism,
another benchmark was executed in the "Local SSD" setup, where parallel
checkout showed to be beneficial. This time, we compared the runtime of
a `git checkout -f`, with and without parallelism, after randomly
removing an increasing number of files from the Linux working tree. The
"sequential fallback" column below corresponds to the executions where
checkout.workers was 10 but checkout.thresholdForParallelism was equal
to the number of to-be-updated files plus one (so that we end up writing
sequentially). Each test case was sampled 15 times, and each sample had
a randomly different set of files removed. Here are the results:
sequential fallback 10 workers speedup
10 files 772.3 ms ± 12.6 ms 769.0 ms ± 13.6 ms 1.00 ± 0.02
20 files 780.5 ms ± 15.8 ms 775.2 ms ± 9.2 ms 1.01 ± 0.02
50 files 806.2 ms ± 13.8 ms 767.4 ms ± 8.5 ms 1.05 ± 0.02
100 files 833.7 ms ± 21.4 ms 750.5 ms ± 16.8 ms 1.11 ± 0.04
200 files 897.6 ms ± 30.9 ms 730.5 ms ± 14.7 ms 1.23 ± 0.05
500 files 1035.4 ms ± 48.0 ms 677.1 ms ± 22.3 ms 1.53 ± 0.09
1000 files 1244.6 ms ± 35.6 ms 654.0 ms ± 38.3 ms 1.90 ± 0.12
2000 files 1488.8 ms ± 53.4 ms 658.8 ms ± 23.8 ms 2.26 ± 0.12
From the above numbers, 100 files seems to be a reasonable default value
for the threshold setting.
Note: Up to 1000 files, we observe a drop in the execution time of the
parallel code with an increase in the number of files. This is a rather
odd behavior, but it was observed in multiple repetitions. Above 1000
files, the execution time increases according to the number of files, as
one would expect.
About the test environments: Local SSD tests were executed on an
i7-7700HQ (4 cores with hyper-threading) running Manjaro Linux. Local
HDD tests were executed on an Intel(R) Xeon(R) E3-1230 (also 4 cores
with hyper-threading), HDD Seagate Barracuda 7200.14 SATA 3.1, running
Debian. NFS and EFS tests were executed on an Amazon EC2 c5n.xlarge
instance, with 4 vCPUs. The Linux NFS server was running on a m6g.large
instance with 2 vCPUSs and a 1 TB EBS GP2 volume. Before each timing,
the linux repository was removed (or checked out back to its previous
state), and `sync && sysctl vm.drop_caches=3` was executed.
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document changes in -m and --diff-merges=m semantics, as well as new
--diff-merges=on option.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New log.diffMerges configuration variable sets the format that
--diff-merges=on will be using. The default is "separate".
t4013: add the following tests for log.diffMerges config:
* Test that wrong values are denied.
* Test that the value of log.diffMerges properly affects both
--diff-merges=on and -m.
t9902: fix completion tests for log.d* to match log.diffMerges.
Added documentation for log.diffMerges.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'prefetch' maintenance task previously forced the following refspec
for each remote:
+refs/heads/*:refs/prefetch/<remote>/*
If a user has specified a more strict refspec for the remote, then this
prefetch task downloads more objects than necessary.
The previous change introduced the '--prefetch' option to 'git fetch'
which manipulates the remote's refspec to place all resulting refs into
refs/prefetch/, with further partitioning based on the destinations of
those refspecs.
Update the documentation to be more generic about the destination refs.
Do not mention custom refspecs explicitly, as that does not need to be
highlighted in this documentation. The important part of placing refs in
refs/prefetch/ remains.
Reported-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --prefetch option will be used by the 'prefetch' maintenance task
instead of sending refspecs explicitly across the command-line. The
intention is to modify the refspec to place all results in
refs/prefetch/ instead of anywhere else.
Create helper method filter_prefetch_refspec() to modify a given refspec
to fit the rules expected of the prefetch task:
* Negative refspecs are preserved.
* Refspecs without a destination are removed.
* Refspecs whose source starts with "refs/tags/" are removed.
* Other refspecs are placed within "refs/prefetch/".
Finally, we add the 'force' option to ensure that prefetch refs are
replaced as necessary.
There are some interesting cases that are worth testing.
An earlier version of this change dropped the "i--" from the loop that
deletes a refspec item and shifts the remaining entries down. This
allowed some refspecs to not be modified. The subtle part about the
first --prefetch test is that the "refs/tags/*" refspec appears directly
before the "refs/heads/bogus/*" refspec. Without that "i--", this
ordering would remove the "refs/tags/*" refspec and leave the last one
unmodified, placing the result in "refs/heads/*".
It is possible to have an empty refspec. This is typically the case for
remotes other than the origin, where users want to fetch a specific tag
or branch. To correctly test this case, we need to further remove the
upstream remote for the local branch. Thus, we are testing a refspec
that will be deleted, leaving nothing to fetch.
Helped-by: Tom Saeger <tom.saeger@oracle.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" now takes "--3way" and "--cached" at the same time, and
work and record results only in the index.
* jz/apply-3way-cached:
git-apply: allow simultaneous --cached and --3way options
"git apply --3way" has always been "to fall back to 3-way merge
only when straight application fails". Swap the order of falling
back so that 3-way is always attempted first (only when the option
is given, of course) and then straight patch application is used as
a fallback when it fails.
* jz/apply-run-3way-first:
git-apply: try threeway first when "--3way" is used
The same "do not capitalize the first word" rule is applied to both
our patch titles and error messages, but the existing description
was fuzzy in two aspects.
* For error messages, it was not said that this was only about the
first word that begins the sentence.
* For both, it was not clear when a capital letter there was not an
error. We avoid capitalizing the first word when the only reason
you would capitalize it is because it happens to be the first
word in the sentence. If a proper noun, which is usually spelled
in capital letters, happens to come at the beginning of the
sentence, it should be kept in capital letters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Edit and expand the sparse-index design document with the plan for
guarding index operations with ensure_full_index().
Notably, the plan has changed to not have an expand_to_path() method in
favor of checking for a sparse-directory hit inside of the
index_path_pos() API.
The changes that follow this one will incrementally add
ensure_full_index() guards to iterations over all cache entries. Some
iterations over the cache entries are not protected due to a few
categories listed in the document. Since these are not being modified,
here is a short list of the files and methods that will not receive
these guards:
Looking for non-zero stage:
* builtin/add.c:chmod_pathspec()
* builtin/merge.c:count_unmerged_entries()
* merge-ort.c:record_conflicted_index_entries()
* read-cache.c:unmerged_index()
* rerere.c:check_one_conflict(), find_conflict(), rerere_remaining()
* revision.c:prepare_show_merge()
* sequencer.c:append_conflicts_hint()
* wt-status.c:wt_status_collect_changes_initial()
Looking for submodules:
* builtin/submodule--helper.c:module_list_compute()
* submodule.c: several methods
* worktree.c:validate_no_submodules()
Part of the index API:
* name-hash.c: lazy init methods
* preload-index.c:preload_thread(), preload_index()
* read-cache.c: file format methods
Checking for correct order of cache entries:
* read-cache.c:check_ce_order()
Ignores SKIP_WORKTREE entries or already aware:
* unpack-trees.c:mark_new_skip_worktree()
* wt-status.c:wt_status_check_sparse_checkout()
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"gitweb" learned "e-mail privacy" feature to redact strings that
look like e-mail addresses on various pages.
* gk/gitweb-redacted-email:
gitweb: add "e-mail privacy" feature to redact e-mail addresses
A configuration variable has been added to force tips of certain
refs to be given a reachability bitmap.
* tb/pack-preferred-tips-to-give-bitmap:
builtin/pack-objects.c: respect 'pack.preferBitmapTips'
t/helper/test-bitmap.c: initial commit
pack-bitmap: add 'test_bitmap_commits()' helper
Correct documentation added in e544221d97 (trace2:
Documentation/technical/api-trace2.txt, 2019-02-22) to state that
calling BUG() also emits an "error" event. See ee4512ed48 (trace2:
create new combined trace facility, 2019-02-22) for the initial
implementation.
The BUG() function did not emit an event then however, that was only
changed later in 0a9dde4a04 (usage: trace2 BUG() invocations,
2021-02-05), that commit changed the code, but didn't update any of
the docs.
Let's also add a cross-reference from api-error-handling.txt.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the BUG() function was added in d8193743e0 (usage.c: add BUG()
function, 2017-05-12) these docs added in 1f23cfe0ef (doc: document
error handling functions and conventions, 2014-12-03) were not
updated. Let's do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new method uses the update_index counter, which isn't susceptible to clock
inaccuracies.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Re-order the sections of a few manual pages to be consistent with the
entirety of the rest of our documentation. This allows us to remove
the just-added whitelist of "bad" order from
lint-man-section-order.perl.
I'm doing that this way around so that code will be easy to dig up if
we'll need it in the future. I've intentionally not added some other
sections such as EXAMPLES to the list of known sections.
If we were to add that we'd find some out of order. Perhaps we'll want
to order those consistently as well in the future, at which point
whitelisting some of them might become handy again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a linting script to check the relative order of the sections in
the documentation. We should have NAME, then SYNOPSIS, DESCRIPTION,
OPTIONS etc. in that order.
That holds true throughout our documentation, except for a few
exceptions which are hardcoded in the linting script.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lint for and fix the three manual pages that were missing the standard
"Part of the linkgit:git[1] suite" end section.
We only do this for the man[157] section documents (we don't have
anything outside those sections), not files to be included,
howto *.txt files etc.
We could also add this to the existing (and then renamed)
lint-gitlink.perl, but I'm not doing that here.
Obviously all of that fits in one script, but I think for something
like this that's a one-off script with global variables it's much
harder to follow when a large part of your script is some if/else or
keeping/resetting of state simply to work around the script doing two
things instead of one.
Especially because in this case this script wants to process the file
as one big string, but lint-gitlink.perl wants to look at it one line
at a time. We could also consolidate this whole thing and
t/check-non-portable-shell.pl, but that one likes to join lines as
part of its shell parsing.
So let's just add another script, whole scaffolding is basically:
use strict;
use warnings;
sub report { ... }
my $code = 0;
while (<>) { ... }
exit $code;
We'd spend more lines effort trying to consolidate them than just
copying that around.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lint-gitlink.perl script added in ab81411ced (ci: validate
"linkgit:" in documentation, 2016-05-04) was more complex than it
needed to be. It:
- Was using File::Find to recursively find *.txt files in
Documentation/, let's instead use the Makefile as a source of truth
for *.txt files, and pass it down to the script.
- We now don't lint linkgit:* in RelNotes/* or technical/*, which we
shouldn't have been doing in the first place anyway.
- When the doc-diff script was added in beb188e22a (add a script to
diff rendered documentation, 2018-08-06) we started sometimes having
a "git worktree" under Documentation/.
This tree contains a full checkout of git.git, as a result the
"lint" script would recurse into that, and lint any *.txt file
found in that entire repository.
In practice the only in-tree "linkgit" outside of the
Documentation/ tree is contrib/contacts/git-contacts.txt and
contrib/subtree/git-subtree.txt, so this wouldn't emit any errors
Now we instead simply trust the Makefile to give us *.txt files.
Since the Makefile also knows what sections each page should be in we
don't have to open the files ourselves and try to parse that out. As a
bonus this will also catch bugs with the section line in the files
themselves being incorrect.
The structure of the new script is mostly based on
t/check-non-portable-shell.pl. As an added bonus it will also use
pos() to print where the problems it finds are, e.g. given an issue
like:
diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt
[...]
and line numbers. git-cherry therefore detects when commits have been
-"copied" by means of linkgit:git-cherry-pick[1], linkgit:git-am[1] or
-linkgit:git-rebase[1].
+"copied" by means of linkgit:git-cherry-pick[2], linkgit:git-am[3] or
+linkgit:git-rebase[4].
We'll now emit:
git-cherry.txt:20: error: git-cherry-pick[2]: wrong section (should be 1), shown with 'HERE' below:
git-cherry.txt:20: '"copied" by means of linkgit:git-cherry-pick[2]' <-- HERE
git-cherry.txt:20: error: git-am[3]: wrong section (should be 1), shown with 'HERE' below:
git-cherry.txt:20: '"copied" by means of linkgit:git-cherry-pick[2], linkgit:git-am[3]' <-- HERE
git-cherry.txt:21: error: git-rebase[4]: wrong section (should be 1), shown with 'HERE' below:
git-cherry.txt:21: 'linkgit:git-rebase[4]' <-- HERE
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend this script added in ab81411ced (ci: validate "linkgit:" in
documentation, 2016-05-04) to pass under "use strict", and add a "use
warnings" for good measure.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Re-introduce a variable to declare what *.txt files need to be
considered for the purposes of scouring files to generate a dependency
graph of includes.
When doc.dep was introduced in a5ae8e64cf (Fix documentation
dependency generation., 2005-11-07) we had such a variable called
TEXTFILES, but it was refactored away just a few commits after that in
fb612d54c1 (Documentation: fix dependency generation.,
2005-11-07). I'm planning to add more wildcards here, so let's bring
it back.
I'm not calling it TEXTFILES because we e.g. don't consider
Documentation/technical/*.txt when generating the graph (they don't
use includes). Let's instead call it DOC_DEP_TXT.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor occurrences of $(wildcard howto/*.txt) into a single
HOWTO_TXT variable for readability and consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in how --no-reschedule-failed-exec interacts with
rebase.rescheduleFailedExec=true being set in the config. Before this
change the --no-reschedule-failed-exec config option would be
overridden by the config.
This bug happened because of the particulars of how "rebase" works
v.s. most other git commands when it comes to parsing options and
config:
When we read the config and parse the CLI options we correctly prefer
the --no-reschedule-failed-exec option over
rebase.rescheduleFailedExec=true in the config. So far so good.
However the --reschedule-failed-exec option doesn't take effect when
the rebase starts (we'd just create a
".git/rebase-merge/reschedule-failed-exec" file if it was true). It
only takes effect when the exec command fails, at which point we'll
reschedule the failed "exec" command.
Since we only wrote out the positive
".git/rebase-merge/reschedule-failed-exec" under
--reschedule-failed-exec, but nothing with --no-reschedule-failed-exec
we'll forget that we asked not to reschedule failed "exec", and would
happily re-read the config and see that
rebase.rescheduleFailedExec=true is set.
So the config will effectively override the user having explicitly
disabled the option on the command-line.
Even more confusingly: Since rebase accepts different options based on
its state there wasn't even a way to get around this with "rebase
--continue --no-reschedule-failed-exec" (but you could of course set
the config with "rebase -c ...").
I think the least bad way out of this is to declare that for such
options and config whatever we decide at the beginning of the rebase
goes. So we'll now always create either a "reschedule-failed-exec" or
a "no-reschedule-failed-exec file at the start, not just the former if
we decided we wanted the feature.
With this new worldview you can no longer change the setting once a
rebase has started except by manually removing the state files
discussed above. I think making it work like that is the the least
confusing thing we can do.
In the future we might want to learn to change the setting in the
middle by combining "--edit-todo" with
"--[no-]reschedule-failed-exec", we currently don't support combining
those options, or any other way to change the state in the middle of
the rebase short of manually editing the files in
".git/rebase-merge/*".
The bug being fixed here originally came about because of a
combination of the behavior of the code added in d421afa0c6 (rebase:
introduce --reschedule-failed-exec, 2018-12-10) and the addition of
the config variable in 969de3ff0e (rebase: add a config option to
default to --reschedule-failed-exec, 2018-12-10).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `uploadpackfilter.allow` is set to `true`, it means that filters
are enabled by default except in the case where a filter is explicitly
disabled via `uploadpackilter.<filter>.allow`. This option will not only
enable the currently supported set of filters, but also any filters
which get added in the future. As such, an admin which wants to have
tight control over which filters are allowed and which aren't probably
shouldn't ever set `uploadpackfilter.allow=true`.
Amend the documentation to make the ramifications more explicit so that
admins are aware of this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb extracts content from the Git log and makes it accessible
over HTTP. As a result, e-mail addresses found in commits are
exposed to web crawlers and they may not respect robots.txt.
This can result in unsolicited messages.
Introduce an 'email-privacy' feature which redacts e-mail addresses
from the generated HTML content. Specifically, obscure addresses
retrieved from the the author/committer and comment sections of the
Git log. The feature is off by default.
This feature does not prevent someone from downloading the
unredacted commit log, e.g., by cloning the repository, and
extracting information from it. It aims to hinder the low-
effort, bulk collection of e-mail addresses by web crawlers.
Signed-off-by: Georgios Kontaxis <geko1702+commits@99rst.org>
Acked-by: Eric Wong <e@80x24.org>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` refrains from adding or updating index entries that are
outside the current sparse checkout, but `git rm` doesn't follow the
same restriction. This is somewhat counter-intuitive and inconsistent.
So make `rm` honor the sparsity rules and advise on how to remove
SKIP_WORKTREE entries just like `add` does. Also add some tests for the
new behavior.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` already refrains from updating SKIP_WORKTREE entries, but it
silently exits with zero code when it is asked to do so. Instead, let's
warn the user and display a hint on how to update these entries.
Note that we only warn the user whey they give a pathspec item that
matches no eligible path for updating, but it does match one or more
SKIP_WORKTREE entries. A warning was chosen over erroring out right away
to reproduce the same behavior `add` already exhibits with ignored
files. This also allow users to continue their workflow without having
to invoke `add` again with only the eligible paths (as those will have
already been added).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a diff driver for Scheme-like languages which recognizes top level
and local `define` forms, whether it is a function definition, binding,
syntax definition or a user-defined `define-xyzzy` form.
Also supports R6RS `library` forms, `module` forms along with class and
struct declarations used in Racket (PLT Scheme).
Alternate "def" syntax such as those in Gerbil Scheme are also
supported, like defstruct, defsyntax and so on.
The rationale for picking `define` forms for the hunk headers is because
it is usually the only significant form for defining the structure of
the program, and it is a common pattern for schemers to have local
function definitions to hide their visibility, so it is not only the top
level `define`'s that are of interest. Schemers also extend the language
with macros to provide their own define forms (for example, something
like a `define-test-suite`) which is also captured in the hunk header.
Since it is common practice to extend syntax with variants of a form
like `module+`, `class*` etc, those have been supported as well.
The word regex is a best-effort attempt to conform to R7RS[1] valid
identifiers, symbols and numbers.
[1] https://small.r7rs.org/attachment/r7rs.pdf (section 2.1)
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --reject-shallow" option fails the clone as soon as we
notice that we are cloning from a shallow repository.
* ll/clone-reject-shallow:
builtin/clone.c: add --reject-shallow option
An on-disk reverse-index to map the in-pack location of an object
back to its object name across multiple packfiles is introduced.
* tb/reverse-midx:
midx.c: improve cache locality in midx_pack_order_cmp()
pack-revindex: write multi-pack reverse indexes
pack-write.c: extract 'write_rev_file_order'
pack-revindex: read multi-pack reverse indexes
Documentation/technical: describe multi-pack reverse indexes
midx: make some functions non-static
midx: keep track of the checksum
midx: don't free midx_name early
midx: allow marking a pack as preferred
t/helper/test-read-midx.c: add '--show-objects'
builtin/multi-pack-index.c: display usage on unrecognized command
builtin/multi-pack-index.c: don't enter bogus cmd_mode
builtin/multi-pack-index.c: split sub-commands
builtin/multi-pack-index.c: define common usage with a macro
builtin/multi-pack-index.c: don't handle 'progress' separately
builtin/multi-pack-index.c: inline 'flags' with options
"git apply" does not allow "--cached" and "--3way" to be used
together, since "--3way" writes conflict markers into the working
tree.
Allow "git apply" to accept "--cached" and "--3way" at the same
time. When a single file auto-resolves cleanly, the result is
placed in the index at stage #0 and the command exits with 0 status.
For a file that has a conflict which cannot be cleanly
auto-resolved, the original contents from common ancestor (stage
conflict at the content level, and the command exists with non-zero
status, because there is no place (like the working tree) to leave a
half-resolved merge for the user to resolve.
The user can use `git diff` to view the contents of the conflict, or
`git checkout -m -- .` to regenerate the conflict markers in the
working directory.
Don't attempt rerere in this case since it depends on conflict
markers written to file for its database storage and lookup. There
would be two main changes required to get rerere working:
1. Allow the rerere api to accept in memory object rather than
files, which would allow us to pass in the conflict markers
contained in the result from ll_merge().
2. Rerere can't write to the working directory, so it would have to
apply the result to cache stage #0 directly. A flag would be
needed to control this.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SECURITY.md that is facing individual contributors and end users
has been introduced. Also a procedure to follow when preparing
embargoed releases has been spelled out.
* js/security-md:
Document how we do embargoed releases
SECURITY: describe how to report vulnerabilities
