The "diff" drivers specified by the "diff" attribute attached to
paths can now specify which algorithm (e.g. histogram) to use.
* jc/diff-algo-attribute:
diff: teach diff to read algorithm from diff driver
diff: consolidate diff algorithm option parsing
An invalid label or ref in the "rebase -i" todo file used to
trigger an runtime error. SUch an error is now diagnosed while the
todo file is parsed.
* pw/rebase-i-validate-labels-early:
rebase -i: check labels and refs when parsing todo list
The 'restore' command already rejects the --merge, --conflict, --ours
and --theirs options when combined with --staged, but accepts them when
--worktree is added as well.
Unfortunately that doesn't appear to do anything useful. The --ours and
--theirs options seem to be ignored when both --staged and --worktree
are given, whereas with --merge or --conflict, the command has the same
effect as if the --staged option wasn't present.
So reject those options with '--staged --worktree' as well, using
opts->accept_ref to distinguish restore from checkout.
Add test for both '--staged' and '--staged --worktree'.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With roughly 800 remotes all fetching into their own
refs/remotes/$REMOTE/* island, the connectivity check[1] gets
expensive for each fetch on systems which lack sufficient RAM to
cache objects.
To do a no-op fetch on one $REMOTE out of hundreds, hideRefs now
allows the no-op fetch to take ~30 seconds instead of ~20 minutes
on a noisy, RAM-constrained machine (localhost, so no network latency):
git -c fetch.hideRefs=refs \
-c fetch.hideRefs='!refs/remotes/$REMOTE/' \
fetch $REMOTE
[1] `git rev-list --objects --stdin --not --all --quiet --alternate-refs'
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a comment describing how each test file should start was added in
commit [1], it was the second comment of t/test-lib.sh. The comment
describes how variable "test_description" is supposed to be assigned at
the top of each test file and how "test-lib.sh" should be used by
sourcing it. However, even in [1], the comment was ten lines away from
the usage of the variable by test-lib.sh. Since then, the comment has
drifted away both from the top of the file and from the usage of the
variable. The comment just sits in the middle of the initialization of
the test library, surrounded by unrelated code, almost one hundred lines
away from the usage of "test_description".
Nobody has noticed this drift during evolution of test-lib.sh, which
suggests that this comment has outlived its usefulness. The assignment
of "test_description", sourcing of "test-lib.sh" by tests, and the
process of writing tests in general are described in detail in
"t/README". So drop the obsolete comment.
An alternative solution could be to move the comment either to the top
of the file, or down to the usage of variable "test_description".
[1] e1970ce43a ("[PATCH 1/2] Test framework take two.", 2005-05-13)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid making users believe they need to initialize df_conflict_entry
to something (as happened with other output only fields before) with
a quick comment and a small sanity check.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/read-tree.c has some special functionality explicitly designed
for debugging unpack-trees.[ch]. Associated with that is two fields
that no other external caller would or should use. Mark these as
internal to unpack-trees, but allow builtin/read-tree to read or write
them for this special case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch made many lines a little longer, resulting in four
becoming a bit too long. They were left as-is for the previous patch
to facilitate reviewers verifying that we were just adding "internal."
in a bunch of places, but rewrap them now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue the work from the previous patch by finding additional fields
which are only used internally but not yet explicitly marked as such,
and include them in the internal fields struct.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just splits the two fields already marked as internal-only into a
separate internal struct. Future commits will add more fields that
were meant to be internal-only but were not explicitly marked as such
to the same struct.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 2f6b1eb794 ("cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index()", 2023-01-12) mistakenly added some initialization
of a member of unpack_trees_options that was intended to be
internal-only. This initialization should be done within
update_sparsity() instead.
Note that while o->result is mostly meant for unpack_trees() and
update_sparsity() mostly operates without o->result,
check_ok_to_remove() does consult it so we need to ensure it is properly
initialized.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
struct unpack_trees_options has the following field and comment:
struct pattern_list *pl; /* for internal use */
Despite the internal-use comment, commit e091228e17 ("sparse-checkout:
update working directory in-process", 2019-11-21) starting setting this
field from an external caller. At the time, the only way around that
would have been to modify unpack_trees() to take an extra pattern_list
argument, and there's a lot of callers of that function. However, when
we split update_sparsity() off as a separate function, with
sparse-checkout being the sole caller, the need to update other callers
went away. Fix this API problem by adding a pattern_list argument to
update_sparsity() and stop setting the internal o.pl field directly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The update_sparsity() function was introduced in commit 7af7a25853
("unpack-trees: add a new update_sparsity() function", 2020-03-27).
Prior to that, unpack_trees() was used, but that had a few bugs because
the needs of the caller were different, and different enough that
unpack_trees() could not easily be modified to handle both usecases.
The implementation detail that update_sparsity() was written by copying
unpack_trees() and then streamlining it, and then modifying it in the
needed ways still shows through in that there are leftover vestiges in
both functions that are no longer needed. Clean them up. In
particular:
* update_sparsity() allows a pattern list to be passed in, but
unpack_trees() never should use a different pattern list. Add a
check and a BUG() if this gets violated.
* update_sparsity() has a check early on that will BUG() if
o->skip_sparse_checkout is set; as such, there's no need to check
for that condition again later in the code. We can simply remove
the check and its corresponding goto label.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, also group these fields together for convenience.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As evidenced by the fix a couple commits ago, places in the code using
exclude_per_dir are likely buggy and should be adapted to call
setup_standard_excludes() instead. Unfortunately, the usage of
exclude_per_dir has been hardcoded into the arguments ls-files accepts,
so we cannot actually remove it. Add a note that it is deprecated and
no other callers should use it directly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to make it clearer to callers what portions of dir_struct are
public API, and avoid errors from them setting fields that are meant as
internal API, split the fields used for internal implementation reasons
into a separate embedded struct.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a directory exists but has only ignored files within it and we are
trying to switch to a branch that has a file where that directory is,
the behavior depends upon --[no]-overwrite-ignore. If the user wants to
--overwrite-ignore (the default), then we should delete the ignored file
and directory and switch to the new branch.
The code to handle this in verify_clean_subdirectory() in unpack-trees
tried to handle this via paying attention to the exclude_per_dir setting
of the internal dir field. This came from commit c81935348b ("Fix
switching to a branch with D/F when current branch has file D.",
2007-03-15), which pre-dated 039bc64e88 ("core.excludesfile clean-up",
2007-11-14), and thus did not pay attention to ignore patterns from
other relevant files. Change it to use setup_standard_excludes() so
that it is also aware of excludes specified in other locations.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2021.6 existed to test the status of a symlink that was left around by
previous tests. It tried to also clean up the symlink after it was done
so that subsequent tests wouldn't be tripped up by it. Unfortunately,
since this test had a SYMLINK prerequisite, that made the cleanup
platform dependent...and made a testcase I was trying to add to this
testsuite fail (that testcase will be included in the next patch).
Before we go and add new testcases, fix this cleanup by moving it into a
separate test.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fd2d4c135e (gpg-interface: lazily initialize and read the
configuration, 2023-02-09) shrunk a few custom config callbacks so that
they are just one-liners of:
return git_default_config(...);
We can drop them entirely and replace them direct calls of
git_default_config() intead. This makes the code a little shorter and
easier to understand (with the downside being that if they do grow
custom options again later, we'll have to recreate the functions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In fb64ca526a (fsck: check index files in all worktrees, 2023-02-24), we
swapped out a call to vanilla repo_read_index() for a series of
read_index_from() calls, one per worktree. The code for the latter was
copied from add_index_objects_to_pending(), which checks for a positive
return value from the index reading function, and we do the same here in
fsck now.
But this is probably the wrong thing. I had interpreted the check as
"don't operate on the index struct if there was an error". But in
reality, if there is an error then the index-reading code will simply
die (which admittedly is not great for fsck, but that is not a new
problem).
The return value here is actually the number of entries read. So it
makes sense for add_index_objects_to_pending() to ignore a zero-entry
index (there is nothing to add). But for fsck, we would still want to
check any extensions, etc (though presumably it is unlikely to have them
in an empty index, I don't think it's impossible).
So we should ignore the return value from read_index_from() entirely.
This matches the behavior before fb64ca526a, when we ignored the return
value from repo_read_index().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5883034 (checkout: reject if the branch is already checked out
elsewhere) in normal use, we do not allow multiple worktrees having the
same checked out branch.
A bug has recently been fixed that caused this to not work as expected.
Let's add a test to notice if this changes in the future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b5cabb4a9 (rebase: refuse to switch to branch already checked out
elsewhere, 2020-02-23) we add a condition to prevent a rebase operation
involving a switch to a branch that is already checked out in another
worktree.
A bug has recently been fixed that caused this to not work as expected.
Let's add a test to notice if this changes in the future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8d9fdd7 (worktree.c: check whether branch is rebased in another
worktree, 2016-04-22) die_if_checked_out() learned a new option
ignore_current_worktree, to modify the operation from "die() if the
branch is checked out in any worktree" to "die() if the branch is
checked out in any worktree other than the current one".
Unfortunately we implemented it by checking the flag is_current in the
worktree that find_shared_symref() returns.
When the same branch is checked out in several worktrees simultaneously,
find_shared_symref() will return the first matching worktree in the list
composed by get_worktrees(). If one of the worktrees with the checked
out branch is the current worktree, find_shared_symref() may or may not
return it, depending on the order in the list.
Instead of find_shared_symref(), let's do the search using use the
recently introduced API is_shared_symref(), and consider
ignore_current_worktree when necessary.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function, is_shared_symref(), which contains the heart of
find_shared_symref(). Refactor find_shared_symref() to use the new
function is_shared_symref().
Soon, we will use is_shared_symref() to search for symref beyond
the first worktree that matches.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The style of t9700-perl-git.sh is old. There are 3 problems:
* A title is not on the same line with test_expect_success command.
* A test body is indented by whitespaces.
* There are whitespaces after redirect operators.
Modernize test scripts by:
* Combine the title with test_expect_success command.
* Replace whitespace indents with TAB.
* Delete whitespaces after redirect operators.
Signed-off-by: Zhang Yi <18994118902@163.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --jobs=0" used to hit a BUG(), which has been corrected
to use the available CPUs.
* ma/fetch-parallel-use-online-cpus:
fetch: choose a sensible default with --jobs=0 again
A test helper had a single write(2) of 256kB, which was too big for
some platforms (e.g. NonStop), which has been corrected by using
xwrite() wrapper appropriately.
* jc/genzeros-avoid-raw-write:
test-genzeros: avoid raw write(2)
Error messages given upon a signature verification failure used to
discard the errors from underlying gpg program, which has been
corrected.
* js/gpg-errors:
gpg: do show gpg's error message upon failure
t7510: add a test case that does not need gpg
If we encounter an error in an index file, we may say something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo
But if you have multiple worktrees, each with its own index, it can be
very helpful to know which file had the problem. So let's pass that path
down through the various index-fsck functions and use it where
appropriate. After this patch you should get something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo of .git/worktrees/wt/index
That's a bit verbose, but since the point is that you shouldn't see this
normally, we're better to err on the side of more details.
I've also added the index filename to the name used by "fsck
--name-objects", which will show up if we find the object to be missing,
etc. This is bending the rules a little there, as the option claims to
write names that can be fed to rev-parse. But there is no revision
syntax to access the index of another worktree, so the best we can do is
make up something that a human will probably understand.
I did take care to retain the existing ":file" syntax for the current
worktree. So the uglier output should kick in only when it's actually
necessary. See the included tests for examples of both forms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the index file for the main worktree, but completely ignore the
index files in other worktrees. These should be checked, too, as they
are part of the repository state (and in particular, errors in those
index files may cause repo-wide operations like "git gc" to complain).
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to fsck an index operates directly on the_index. Let's move it
into its own function in preparation for handling the index files from
other worktrees.
Since we now have only a single reference to the_index, let's drop
our USE_THE_INDEX_VARIABLE definition and just use the_repository.index
directly. That's a minor cleanup, but also ensures that we didn't miss
any references when moving the code into fsck_index().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extra callback parameter became unused in 0918d08887 (help.c: fix
autocorrect in work tree for bare repository, 2022-10-29), but we can't
get rid of it because we must conform to the config callback interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our parallel process API takes several callbacks via function pointers
in the run_process_paralell_opts struct. Not every callback needs every
parameter; let's mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is used as a callback to strbuf_expand(), so it must
conform to the correct interface. But naturally it doesn't need to touch
its "sb" parameter, since it is only examining the placeholder string,
and not actually writing any output. So mark the unused parameter to
silence -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for_each_commit_graft() functions takes a callback, but not every
callback uses the void data parameter. Mark the unused one to appease
the -Wunused-parameter warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite_parents() function takes a callback, but not every callback
needs the "rev" parameter. Mark the unused one so -Wunused-parameter
will be happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for_each_cached_alternate() interface requires a callback that takes
a negotiator parameter, but not all implementations need it. Mark the
unused one as such to appease -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for_each_note() requires a callback, but not all callbacks need all of
the parameters. Likewise, init_notes() takes a callback to implement the
"combine" strategy, but the "ignore" variant obviously doesn't look at
its arguments at all. Mark unused parameters as appropriate to silence
compiler warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prio_queue_compare_fn interface has a void pointer to allow callers
to pass arbitrary data, but most comparison functions don't need it.
Mark those cases to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for_each_{loose,packed}_object interface uses callback functions,
but not every callback needs all of the parameters. Mark the unused ones
to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our graph-traversal functions take callbacks for showing commits and
objects, but not all callbacks need each parameter. Likewise for the
similar traverse_bitmap_commit_list(), which has a different interface
but serves the same purpose. And the include_check mechanism, which
passes along a void pointer which is not always used.
Mark the unused ones to to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signal handlers receive their signal number as a parameter, but many
don't care what it is (because they only handle one signal, or because
their action is the same regardless of the signal). Mark such parameters
to silence -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
